diff options
Diffstat (limited to 'kernel/fs/ext3/super.c')
| -rw-r--r-- | kernel/fs/ext3/super.c | 3165 |
1 files changed, 3165 insertions, 0 deletions
diff --git a/kernel/fs/ext3/super.c b/kernel/fs/ext3/super.c new file mode 100644 index 000000000..a9312f0a5 --- /dev/null +++ b/kernel/fs/ext3/super.c @@ -0,0 +1,3165 @@ +/* + * linux/fs/ext3/super.c + * + * Copyright (C) 1992, 1993, 1994, 1995 + * Remy Card (card@masi.ibp.fr) + * Laboratoire MASI - Institut Blaise Pascal + * Universite Pierre et Marie Curie (Paris VI) + * + * from + * + * linux/fs/minix/inode.c + * + * Copyright (C) 1991, 1992 Linus Torvalds + * + * Big-endian to little-endian byte-swapping/bitmaps by + * David S. Miller (davem@caip.rutgers.edu), 1995 + */ + +#include <linux/module.h> +#include <linux/blkdev.h> +#include <linux/parser.h> +#include <linux/exportfs.h> +#include <linux/statfs.h> +#include <linux/random.h> +#include <linux/mount.h> +#include <linux/quotaops.h> +#include <linux/seq_file.h> +#include <linux/log2.h> +#include <linux/cleancache.h> +#include <linux/namei.h> + +#include <asm/uaccess.h> + +#define CREATE_TRACE_POINTS + +#include "ext3.h" +#include "xattr.h" +#include "acl.h" +#include "namei.h" + +#ifdef CONFIG_EXT3_DEFAULTS_TO_ORDERED + #define EXT3_MOUNT_DEFAULT_DATA_MODE EXT3_MOUNT_ORDERED_DATA +#else + #define EXT3_MOUNT_DEFAULT_DATA_MODE EXT3_MOUNT_WRITEBACK_DATA +#endif + +static int ext3_load_journal(struct super_block *, struct ext3_super_block *, + unsigned long journal_devnum); +static int ext3_create_journal(struct super_block *, struct ext3_super_block *, + unsigned int); +static int ext3_commit_super(struct super_block *sb, + struct ext3_super_block *es, + int sync); +static void ext3_mark_recovery_complete(struct super_block * sb, + struct ext3_super_block * es); +static void ext3_clear_journal_err(struct super_block * sb, + struct ext3_super_block * es); +static int ext3_sync_fs(struct super_block *sb, int wait); +static const char *ext3_decode_error(struct super_block * sb, int errno, + char nbuf[16]); +static int ext3_remount (struct super_block * sb, int * flags, char * data); +static int ext3_statfs (struct dentry * dentry, struct kstatfs * buf); +static int ext3_unfreeze(struct super_block *sb); +static int ext3_freeze(struct super_block *sb); + +/* + * Wrappers for journal_start/end. + */ +handle_t *ext3_journal_start_sb(struct super_block *sb, int nblocks) +{ + journal_t *journal; + + if (sb->s_flags & MS_RDONLY) + return ERR_PTR(-EROFS); + + /* Special case here: if the journal has aborted behind our + * backs (eg. EIO in the commit thread), then we still need to + * take the FS itself readonly cleanly. */ + journal = EXT3_SB(sb)->s_journal; + if (is_journal_aborted(journal)) { + ext3_abort(sb, __func__, + "Detected aborted journal"); + return ERR_PTR(-EROFS); + } + + return journal_start(journal, nblocks); +} + +int __ext3_journal_stop(const char *where, handle_t *handle) +{ + struct super_block *sb; + int err; + int rc; + + sb = handle->h_transaction->t_journal->j_private; + err = handle->h_err; + rc = journal_stop(handle); + + if (!err) + err = rc; + if (err) + __ext3_std_error(sb, where, err); + return err; +} + +void ext3_journal_abort_handle(const char *caller, const char *err_fn, + struct buffer_head *bh, handle_t *handle, int err) +{ + char nbuf[16]; + const char *errstr = ext3_decode_error(NULL, err, nbuf); + + if (bh) + BUFFER_TRACE(bh, "abort"); + + if (!handle->h_err) + handle->h_err = err; + + if (is_handle_aborted(handle)) + return; + + printk(KERN_ERR "EXT3-fs: %s: aborting transaction: %s in %s\n", + caller, errstr, err_fn); + + journal_abort_handle(handle); +} + +void ext3_msg(struct super_block *sb, const char *prefix, + const char *fmt, ...) +{ + struct va_format vaf; + va_list args; + + va_start(args, fmt); + + vaf.fmt = fmt; + vaf.va = &args; + + printk("%sEXT3-fs (%s): %pV\n", prefix, sb->s_id, &vaf); + + va_end(args); +} + +/* Deal with the reporting of failure conditions on a filesystem such as + * inconsistencies detected or read IO failures. + * + * On ext2, we can store the error state of the filesystem in the + * superblock. That is not possible on ext3, because we may have other + * write ordering constraints on the superblock which prevent us from + * writing it out straight away; and given that the journal is about to + * be aborted, we can't rely on the current, or future, transactions to + * write out the superblock safely. + * + * We'll just use the journal_abort() error code to record an error in + * the journal instead. On recovery, the journal will complain about + * that error until we've noted it down and cleared it. + */ + +static void ext3_handle_error(struct super_block *sb) +{ + struct ext3_super_block *es = EXT3_SB(sb)->s_es; + + EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS; + es->s_state |= cpu_to_le16(EXT3_ERROR_FS); + + if (sb->s_flags & MS_RDONLY) + return; + + if (!test_opt (sb, ERRORS_CONT)) { + journal_t *journal = EXT3_SB(sb)->s_journal; + + set_opt(EXT3_SB(sb)->s_mount_opt, ABORT); + if (journal) + journal_abort(journal, -EIO); + } + if (test_opt (sb, ERRORS_RO)) { + ext3_msg(sb, KERN_CRIT, + "error: remounting filesystem read-only"); + /* + * Make sure updated value of ->s_mount_state will be visible + * before ->s_flags update. + */ + smp_wmb(); + sb->s_flags |= MS_RDONLY; + } + ext3_commit_super(sb, es, 1); + if (test_opt(sb, ERRORS_PANIC)) + panic("EXT3-fs (%s): panic forced after error\n", + sb->s_id); +} + +void ext3_error(struct super_block *sb, const char *function, + const char *fmt, ...) +{ + struct va_format vaf; + va_list args; + + va_start(args, fmt); + + vaf.fmt = fmt; + vaf.va = &args; + + printk(KERN_CRIT "EXT3-fs error (device %s): %s: %pV\n", + sb->s_id, function, &vaf); + + va_end(args); + + ext3_handle_error(sb); +} + +static const char *ext3_decode_error(struct super_block * sb, int errno, + char nbuf[16]) +{ + char *errstr = NULL; + + switch (errno) { + case -EIO: + errstr = "IO failure"; + break; + case -ENOMEM: + errstr = "Out of memory"; + break; + case -EROFS: + if (!sb || EXT3_SB(sb)->s_journal->j_flags & JFS_ABORT) + errstr = "Journal has aborted"; + else + errstr = "Readonly filesystem"; + break; + default: + /* If the caller passed in an extra buffer for unknown + * errors, textualise them now. Else we just return + * NULL. */ + if (nbuf) { + /* Check for truncated error codes... */ + if (snprintf(nbuf, 16, "error %d", -errno) >= 0) + errstr = nbuf; + } + break; + } + + return errstr; +} + +/* __ext3_std_error decodes expected errors from journaling functions + * automatically and invokes the appropriate error response. */ + +void __ext3_std_error (struct super_block * sb, const char * function, + int errno) +{ + char nbuf[16]; + const char *errstr; + + /* Special case: if the error is EROFS, and we're not already + * inside a transaction, then there's really no point in logging + * an error. */ + if (errno == -EROFS && journal_current_handle() == NULL && + (sb->s_flags & MS_RDONLY)) + return; + + errstr = ext3_decode_error(sb, errno, nbuf); + ext3_msg(sb, KERN_CRIT, "error in %s: %s", function, errstr); + + ext3_handle_error(sb); +} + +/* + * ext3_abort is a much stronger failure handler than ext3_error. The + * abort function may be used to deal with unrecoverable failures such + * as journal IO errors or ENOMEM at a critical moment in log management. + * + * We unconditionally force the filesystem into an ABORT|READONLY state, + * unless the error response on the fs has been set to panic in which + * case we take the easy way out and panic immediately. + */ + +void ext3_abort(struct super_block *sb, const char *function, + const char *fmt, ...) +{ + struct va_format vaf; + va_list args; + + va_start(args, fmt); + + vaf.fmt = fmt; + vaf.va = &args; + + printk(KERN_CRIT "EXT3-fs (%s): error: %s: %pV\n", + sb->s_id, function, &vaf); + + va_end(args); + + if (test_opt(sb, ERRORS_PANIC)) + panic("EXT3-fs: panic from previous error\n"); + + if (sb->s_flags & MS_RDONLY) + return; + + ext3_msg(sb, KERN_CRIT, + "error: remounting filesystem read-only"); + EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS; + set_opt(EXT3_SB(sb)->s_mount_opt, ABORT); + /* + * Make sure updated value of ->s_mount_state will be visible + * before ->s_flags update. + */ + smp_wmb(); + sb->s_flags |= MS_RDONLY; + + if (EXT3_SB(sb)->s_journal) + journal_abort(EXT3_SB(sb)->s_journal, -EIO); +} + +void ext3_warning(struct super_block *sb, const char *function, + const char *fmt, ...) +{ + struct va_format vaf; + va_list args; + + va_start(args, fmt); + + vaf.fmt = fmt; + vaf.va = &args; + + printk(KERN_WARNING "EXT3-fs (%s): warning: %s: %pV\n", + sb->s_id, function, &vaf); + + va_end(args); +} + +void ext3_update_dynamic_rev(struct super_block *sb) +{ + struct ext3_super_block *es = EXT3_SB(sb)->s_es; + + if (le32_to_cpu(es->s_rev_level) > EXT3_GOOD_OLD_REV) + return; + + ext3_msg(sb, KERN_WARNING, + "warning: updating to rev %d because of " + "new feature flag, running e2fsck is recommended", + EXT3_DYNAMIC_REV); + + es->s_first_ino = cpu_to_le32(EXT3_GOOD_OLD_FIRST_INO); + es->s_inode_size = cpu_to_le16(EXT3_GOOD_OLD_INODE_SIZE); + es->s_rev_level = cpu_to_le32(EXT3_DYNAMIC_REV); + /* leave es->s_feature_*compat flags alone */ + /* es->s_uuid will be set by e2fsck if empty */ + + /* + * The rest of the superblock fields should be zero, and if not it + * means they are likely already in use, so leave them alone. We + * can leave it up to e2fsck to clean up any inconsistencies there. + */ +} + +/* + * Open the external journal device + */ +static struct block_device *ext3_blkdev_get(dev_t dev, struct super_block *sb) +{ + struct block_device *bdev; + char b[BDEVNAME_SIZE]; + + bdev = blkdev_get_by_dev(dev, FMODE_READ|FMODE_WRITE|FMODE_EXCL, sb); + if (IS_ERR(bdev)) + goto fail; + return bdev; + +fail: + ext3_msg(sb, KERN_ERR, "error: failed to open journal device %s: %ld", + __bdevname(dev, b), PTR_ERR(bdev)); + + return NULL; +} + +/* + * Release the journal device + */ +static void ext3_blkdev_put(struct block_device *bdev) +{ + blkdev_put(bdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL); +} + +static void ext3_blkdev_remove(struct ext3_sb_info *sbi) +{ + struct block_device *bdev; + bdev = sbi->journal_bdev; + if (bdev) { + ext3_blkdev_put(bdev); + sbi->journal_bdev = NULL; + } +} + +static inline struct inode *orphan_list_entry(struct list_head *l) +{ + return &list_entry(l, struct ext3_inode_info, i_orphan)->vfs_inode; +} + +static void dump_orphan_list(struct super_block *sb, struct ext3_sb_info *sbi) +{ + struct list_head *l; + + ext3_msg(sb, KERN_ERR, "error: sb orphan head is %d", + le32_to_cpu(sbi->s_es->s_last_orphan)); + + ext3_msg(sb, KERN_ERR, "sb_info orphan list:"); + list_for_each(l, &sbi->s_orphan) { + struct inode *inode = orphan_list_entry(l); + ext3_msg(sb, KERN_ERR, " " + "inode %s:%lu at %p: mode %o, nlink %d, next %d\n", + inode->i_sb->s_id, inode->i_ino, inode, + inode->i_mode, inode->i_nlink, + NEXT_ORPHAN(inode)); + } +} + +static void ext3_put_super (struct super_block * sb) +{ + struct ext3_sb_info *sbi = EXT3_SB(sb); + struct ext3_super_block *es = sbi->s_es; + int i, err; + + dquot_disable(sb, -1, DQUOT_USAGE_ENABLED | DQUOT_LIMITS_ENABLED); + ext3_xattr_put_super(sb); + err = journal_destroy(sbi->s_journal); + sbi->s_journal = NULL; + if (err < 0) + ext3_abort(sb, __func__, "Couldn't clean up the journal"); + + if (!(sb->s_flags & MS_RDONLY)) { + EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); + es->s_state = cpu_to_le16(sbi->s_mount_state); + BUFFER_TRACE(sbi->s_sbh, "marking dirty"); + mark_buffer_dirty(sbi->s_sbh); + ext3_commit_super(sb, es, 1); + } + + for (i = 0; i < sbi->s_gdb_count; i++) + brelse(sbi->s_group_desc[i]); + kfree(sbi->s_group_desc); + percpu_counter_destroy(&sbi->s_freeblocks_counter); + percpu_counter_destroy(&sbi->s_freeinodes_counter); + percpu_counter_destroy(&sbi->s_dirs_counter); + brelse(sbi->s_sbh); +#ifdef CONFIG_QUOTA + for (i = 0; i < EXT3_MAXQUOTAS; i++) + kfree(sbi->s_qf_names[i]); +#endif + + /* Debugging code just in case the in-memory inode orphan list + * isn't empty. The on-disk one can be non-empty if we've + * detected an error and taken the fs readonly, but the + * in-memory list had better be clean by this point. */ + if (!list_empty(&sbi->s_orphan)) + dump_orphan_list(sb, sbi); + J_ASSERT(list_empty(&sbi->s_orphan)); + + invalidate_bdev(sb->s_bdev); + if (sbi->journal_bdev && sbi->journal_bdev != sb->s_bdev) { + /* + * Invalidate the journal device's buffers. We don't want them + * floating about in memory - the physical journal device may + * hotswapped, and it breaks the `ro-after' testing code. + */ + sync_blockdev(sbi->journal_bdev); + invalidate_bdev(sbi->journal_bdev); + ext3_blkdev_remove(sbi); + } + sb->s_fs_info = NULL; + kfree(sbi->s_blockgroup_lock); + mutex_destroy(&sbi->s_orphan_lock); + mutex_destroy(&sbi->s_resize_lock); + kfree(sbi); +} + +static struct kmem_cache *ext3_inode_cachep; + +/* + * Called inside transaction, so use GFP_NOFS + */ +static struct inode *ext3_alloc_inode(struct super_block *sb) +{ + struct ext3_inode_info *ei; + + ei = kmem_cache_alloc(ext3_inode_cachep, GFP_NOFS); + if (!ei) + return NULL; + ei->i_block_alloc_info = NULL; + ei->vfs_inode.i_version = 1; + atomic_set(&ei->i_datasync_tid, 0); + atomic_set(&ei->i_sync_tid, 0); +#ifdef CONFIG_QUOTA + memset(&ei->i_dquot, 0, sizeof(ei->i_dquot)); +#endif + + return &ei->vfs_inode; +} + +static int ext3_drop_inode(struct inode *inode) +{ + int drop = generic_drop_inode(inode); + + trace_ext3_drop_inode(inode, drop); + return drop; +} + +static void ext3_i_callback(struct rcu_head *head) +{ + struct inode *inode = container_of(head, struct inode, i_rcu); + kmem_cache_free(ext3_inode_cachep, EXT3_I(inode)); +} + +static void ext3_destroy_inode(struct inode *inode) +{ + if (!list_empty(&(EXT3_I(inode)->i_orphan))) { + printk("EXT3 Inode %p: orphan list check failed!\n", + EXT3_I(inode)); + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, 16, 4, + EXT3_I(inode), sizeof(struct ext3_inode_info), + false); + dump_stack(); + } + call_rcu(&inode->i_rcu, ext3_i_callback); +} + +static void init_once(void *foo) +{ + struct ext3_inode_info *ei = (struct ext3_inode_info *) foo; + + INIT_LIST_HEAD(&ei->i_orphan); +#ifdef CONFIG_EXT3_FS_XATTR + init_rwsem(&ei->xattr_sem); +#endif + mutex_init(&ei->truncate_mutex); + inode_init_once(&ei->vfs_inode); +} + +static int __init init_inodecache(void) +{ + ext3_inode_cachep = kmem_cache_create("ext3_inode_cache", + sizeof(struct ext3_inode_info), + 0, (SLAB_RECLAIM_ACCOUNT| + SLAB_MEM_SPREAD), + init_once); + if (ext3_inode_cachep == NULL) + return -ENOMEM; + return 0; +} + +static void destroy_inodecache(void) +{ + /* + * Make sure all delayed rcu free inodes are flushed before we + * destroy cache. + */ + rcu_barrier(); + kmem_cache_destroy(ext3_inode_cachep); +} + +static inline void ext3_show_quota_options(struct seq_file *seq, struct super_block *sb) +{ +#if defined(CONFIG_QUOTA) + struct ext3_sb_info *sbi = EXT3_SB(sb); + + if (sbi->s_jquota_fmt) { + char *fmtname = ""; + + switch (sbi->s_jquota_fmt) { + case QFMT_VFS_OLD: + fmtname = "vfsold"; + break; + case QFMT_VFS_V0: + fmtname = "vfsv0"; + break; + case QFMT_VFS_V1: + fmtname = "vfsv1"; + break; + } + seq_printf(seq, ",jqfmt=%s", fmtname); + } + + if (sbi->s_qf_names[USRQUOTA]) + seq_printf(seq, ",usrjquota=%s", sbi->s_qf_names[USRQUOTA]); + + if (sbi->s_qf_names[GRPQUOTA]) + seq_printf(seq, ",grpjquota=%s", sbi->s_qf_names[GRPQUOTA]); + + if (test_opt(sb, USRQUOTA)) + seq_puts(seq, ",usrquota"); + + if (test_opt(sb, GRPQUOTA)) + seq_puts(seq, ",grpquota"); +#endif +} + +static char *data_mode_string(unsigned long mode) +{ + switch (mode) { + case EXT3_MOUNT_JOURNAL_DATA: + return "journal"; + case EXT3_MOUNT_ORDERED_DATA: + return "ordered"; + case EXT3_MOUNT_WRITEBACK_DATA: + return "writeback"; + } + return "unknown"; +} + +/* + * Show an option if + * - it's set to a non-default value OR + * - if the per-sb default is different from the global default + */ +static int ext3_show_options(struct seq_file *seq, struct dentry *root) +{ + struct super_block *sb = root->d_sb; + struct ext3_sb_info *sbi = EXT3_SB(sb); + struct ext3_super_block *es = sbi->s_es; + unsigned long def_mount_opts; + + def_mount_opts = le32_to_cpu(es->s_default_mount_opts); + + if (sbi->s_sb_block != 1) + seq_printf(seq, ",sb=%lu", sbi->s_sb_block); + if (test_opt(sb, MINIX_DF)) + seq_puts(seq, ",minixdf"); + if (test_opt(sb, GRPID)) + seq_puts(seq, ",grpid"); + if (!test_opt(sb, GRPID) && (def_mount_opts & EXT3_DEFM_BSDGROUPS)) + seq_puts(seq, ",nogrpid"); + if (!uid_eq(sbi->s_resuid, make_kuid(&init_user_ns, EXT3_DEF_RESUID)) || + le16_to_cpu(es->s_def_resuid) != EXT3_DEF_RESUID) { + seq_printf(seq, ",resuid=%u", + from_kuid_munged(&init_user_ns, sbi->s_resuid)); + } + if (!gid_eq(sbi->s_resgid, make_kgid(&init_user_ns, EXT3_DEF_RESGID)) || + le16_to_cpu(es->s_def_resgid) != EXT3_DEF_RESGID) { + seq_printf(seq, ",resgid=%u", + from_kgid_munged(&init_user_ns, sbi->s_resgid)); + } + if (test_opt(sb, ERRORS_RO)) { + int def_errors = le16_to_cpu(es->s_errors); + + if (def_errors == EXT3_ERRORS_PANIC || + def_errors == EXT3_ERRORS_CONTINUE) { + seq_puts(seq, ",errors=remount-ro"); + } + } + if (test_opt(sb, ERRORS_CONT)) + seq_puts(seq, ",errors=continue"); + if (test_opt(sb, ERRORS_PANIC)) + seq_puts(seq, ",errors=panic"); + if (test_opt(sb, NO_UID32)) + seq_puts(seq, ",nouid32"); + if (test_opt(sb, DEBUG)) + seq_puts(seq, ",debug"); +#ifdef CONFIG_EXT3_FS_XATTR + if (test_opt(sb, XATTR_USER)) + seq_puts(seq, ",user_xattr"); + if (!test_opt(sb, XATTR_USER) && + (def_mount_opts & EXT3_DEFM_XATTR_USER)) { + seq_puts(seq, ",nouser_xattr"); + } +#endif +#ifdef CONFIG_EXT3_FS_POSIX_ACL + if (test_opt(sb, POSIX_ACL)) + seq_puts(seq, ",acl"); + if (!test_opt(sb, POSIX_ACL) && (def_mount_opts & EXT3_DEFM_ACL)) + seq_puts(seq, ",noacl"); +#endif + if (!test_opt(sb, RESERVATION)) + seq_puts(seq, ",noreservation"); + if (sbi->s_commit_interval) { + seq_printf(seq, ",commit=%u", + (unsigned) (sbi->s_commit_interval / HZ)); + } + + /* + * Always display barrier state so it's clear what the status is. + */ + seq_puts(seq, ",barrier="); + seq_puts(seq, test_opt(sb, BARRIER) ? "1" : "0"); + seq_printf(seq, ",data=%s", data_mode_string(test_opt(sb, DATA_FLAGS))); + if (test_opt(sb, DATA_ERR_ABORT)) + seq_puts(seq, ",data_err=abort"); + + if (test_opt(sb, NOLOAD)) + seq_puts(seq, ",norecovery"); + + ext3_show_quota_options(seq, sb); + + return 0; +} + + +static struct inode *ext3_nfs_get_inode(struct super_block *sb, + u64 ino, u32 generation) +{ + struct inode *inode; + + if (ino < EXT3_FIRST_INO(sb) && ino != EXT3_ROOT_INO) + return ERR_PTR(-ESTALE); + if (ino > le32_to_cpu(EXT3_SB(sb)->s_es->s_inodes_count)) + return ERR_PTR(-ESTALE); + + /* iget isn't really right if the inode is currently unallocated!! + * + * ext3_read_inode will return a bad_inode if the inode had been + * deleted, so we should be safe. + * + * Currently we don't know the generation for parent directory, so + * a generation of 0 means "accept any" + */ + inode = ext3_iget(sb, ino); + if (IS_ERR(inode)) + return ERR_CAST(inode); + if (generation && inode->i_generation != generation) { + iput(inode); + return ERR_PTR(-ESTALE); + } + + return inode; +} + +static struct dentry *ext3_fh_to_dentry(struct super_block *sb, struct fid *fid, + int fh_len, int fh_type) +{ + return generic_fh_to_dentry(sb, fid, fh_len, fh_type, + ext3_nfs_get_inode); +} + +static struct dentry *ext3_fh_to_parent(struct super_block *sb, struct fid *fid, + int fh_len, int fh_type) +{ + return generic_fh_to_parent(sb, fid, fh_len, fh_type, + ext3_nfs_get_inode); +} + +/* + * Try to release metadata pages (indirect blocks, directories) which are + * mapped via the block device. Since these pages could have journal heads + * which would prevent try_to_free_buffers() from freeing them, we must use + * jbd layer's try_to_free_buffers() function to release them. + */ +static int bdev_try_to_free_page(struct super_block *sb, struct page *page, + gfp_t wait) +{ + journal_t *journal = EXT3_SB(sb)->s_journal; + + WARN_ON(PageChecked(page)); + if (!page_has_buffers(page)) + return 0; + if (journal) + return journal_try_to_free_buffers(journal, page, + wait & ~__GFP_WAIT); + return try_to_free_buffers(page); +} + +#ifdef CONFIG_QUOTA +#define QTYPE2NAME(t) ((t)==USRQUOTA?"user":"group") +#define QTYPE2MOPT(on, t) ((t)==USRQUOTA?((on)##USRJQUOTA):((on)##GRPJQUOTA)) + +static int ext3_write_dquot(struct dquot *dquot); +static int ext3_acquire_dquot(struct dquot *dquot); +static int ext3_release_dquot(struct dquot *dquot); +static int ext3_mark_dquot_dirty(struct dquot *dquot); +static int ext3_write_info(struct super_block *sb, int type); +static int ext3_quota_on(struct super_block *sb, int type, int format_id, + struct path *path); +static int ext3_quota_on_mount(struct super_block *sb, int type); +static ssize_t ext3_quota_read(struct super_block *sb, int type, char *data, + size_t len, loff_t off); +static ssize_t ext3_quota_write(struct super_block *sb, int type, + const char *data, size_t len, loff_t off); +static struct dquot **ext3_get_dquots(struct inode *inode) +{ + return EXT3_I(inode)->i_dquot; +} + +static const struct dquot_operations ext3_quota_operations = { + .write_dquot = ext3_write_dquot, + .acquire_dquot = ext3_acquire_dquot, + .release_dquot = ext3_release_dquot, + .mark_dirty = ext3_mark_dquot_dirty, + .write_info = ext3_write_info, + .alloc_dquot = dquot_alloc, + .destroy_dquot = dquot_destroy, +}; + +static const struct quotactl_ops ext3_qctl_operations = { + .quota_on = ext3_quota_on, + .quota_off = dquot_quota_off, + .quota_sync = dquot_quota_sync, + .get_state = dquot_get_state, + .set_info = dquot_set_dqinfo, + .get_dqblk = dquot_get_dqblk, + .set_dqblk = dquot_set_dqblk +}; +#endif + +static const struct super_operations ext3_sops = { + .alloc_inode = ext3_alloc_inode, + .destroy_inode = ext3_destroy_inode, + .write_inode = ext3_write_inode, + .dirty_inode = ext3_dirty_inode, + .drop_inode = ext3_drop_inode, + .evict_inode = ext3_evict_inode, + .put_super = ext3_put_super, + .sync_fs = ext3_sync_fs, + .freeze_fs = ext3_freeze, + .unfreeze_fs = ext3_unfreeze, + .statfs = ext3_statfs, + .remount_fs = ext3_remount, + .show_options = ext3_show_options, +#ifdef CONFIG_QUOTA + .quota_read = ext3_quota_read, + .quota_write = ext3_quota_write, + .get_dquots = ext3_get_dquots, +#endif + .bdev_try_to_free_page = bdev_try_to_free_page, +}; + +static const struct export_operations ext3_export_ops = { + .fh_to_dentry = ext3_fh_to_dentry, + .fh_to_parent = ext3_fh_to_parent, + .get_parent = ext3_get_parent, +}; + +enum { + Opt_bsd_df, Opt_minix_df, Opt_grpid, Opt_nogrpid, + Opt_resgid, Opt_resuid, Opt_sb, Opt_err_cont, Opt_err_panic, Opt_err_ro, + Opt_nouid32, Opt_nocheck, Opt_debug, Opt_oldalloc, Opt_orlov, + Opt_user_xattr, Opt_nouser_xattr, Opt_acl, Opt_noacl, + Opt_reservation, Opt_noreservation, Opt_noload, Opt_nobh, Opt_bh, + Opt_commit, Opt_journal_update, Opt_journal_inum, Opt_journal_dev, + Opt_journal_path, + Opt_abort, Opt_data_journal, Opt_data_ordered, Opt_data_writeback, + Opt_data_err_abort, Opt_data_err_ignore, + Opt_usrjquota, Opt_grpjquota, Opt_offusrjquota, Opt_offgrpjquota, + Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_jqfmt_vfsv1, Opt_quota, + Opt_noquota, Opt_ignore, Opt_barrier, Opt_nobarrier, Opt_err, + Opt_resize, Opt_usrquota, Opt_grpquota +}; + +static const match_table_t tokens = { + {Opt_bsd_df, "bsddf"}, + {Opt_minix_df, "minixdf"}, + {Opt_grpid, "grpid"}, + {Opt_grpid, "bsdgroups"}, + {Opt_nogrpid, "nogrpid"}, + {Opt_nogrpid, "sysvgroups"}, + {Opt_resgid, "resgid=%u"}, + {Opt_resuid, "resuid=%u"}, + {Opt_sb, "sb=%u"}, + {Opt_err_cont, "errors=continue"}, + {Opt_err_panic, "errors=panic"}, + {Opt_err_ro, "errors=remount-ro"}, + {Opt_nouid32, "nouid32"}, + {Opt_nocheck, "nocheck"}, + {Opt_nocheck, "check=none"}, + {Opt_debug, "debug"}, + {Opt_oldalloc, "oldalloc"}, + {Opt_orlov, "orlov"}, + {Opt_user_xattr, "user_xattr"}, + {Opt_nouser_xattr, "nouser_xattr"}, + {Opt_acl, "acl"}, + {Opt_noacl, "noacl"}, + {Opt_reservation, "reservation"}, + {Opt_noreservation, "noreservation"}, + {Opt_noload, "noload"}, + {Opt_noload, "norecovery"}, + {Opt_nobh, "nobh"}, + {Opt_bh, "bh"}, + {Opt_commit, "commit=%u"}, + {Opt_journal_update, "journal=update"}, + {Opt_journal_inum, "journal=%u"}, + {Opt_journal_dev, "journal_dev=%u"}, + {Opt_journal_path, "journal_path=%s"}, + {Opt_abort, "abort"}, + {Opt_data_journal, "data=journal"}, + {Opt_data_ordered, "data=ordered"}, + {Opt_data_writeback, "data=writeback"}, + {Opt_data_err_abort, "data_err=abort"}, + {Opt_data_err_ignore, "data_err=ignore"}, + {Opt_offusrjquota, "usrjquota="}, + {Opt_usrjquota, "usrjquota=%s"}, + {Opt_offgrpjquota, "grpjquota="}, + {Opt_grpjquota, "grpjquota=%s"}, + {Opt_jqfmt_vfsold, "jqfmt=vfsold"}, + {Opt_jqfmt_vfsv0, "jqfmt=vfsv0"}, + {Opt_jqfmt_vfsv1, "jqfmt=vfsv1"}, + {Opt_grpquota, "grpquota"}, + {Opt_noquota, "noquota"}, + {Opt_quota, "quota"}, + {Opt_usrquota, "usrquota"}, + {Opt_barrier, "barrier=%u"}, + {Opt_barrier, "barrier"}, + {Opt_nobarrier, "nobarrier"}, + {Opt_resize, "resize"}, + {Opt_err, NULL}, +}; + +static ext3_fsblk_t get_sb_block(void **data, struct super_block *sb) +{ + ext3_fsblk_t sb_block; + char *options = (char *) *data; + + if (!options || strncmp(options, "sb=", 3) != 0) + return 1; /* Default location */ + options += 3; + /*todo: use simple_strtoll with >32bit ext3 */ + sb_block = simple_strtoul(options, &options, 0); + if (*options && *options != ',') { + ext3_msg(sb, KERN_ERR, "error: invalid sb specification: %s", + (char *) *data); + return 1; + } + if (*options == ',') + options++; + *data = (void *) options; + return sb_block; +} + +#ifdef CONFIG_QUOTA +static int set_qf_name(struct super_block *sb, int qtype, substring_t *args) +{ + struct ext3_sb_info *sbi = EXT3_SB(sb); + char *qname; + + if (sb_any_quota_loaded(sb) && + !sbi->s_qf_names[qtype]) { + ext3_msg(sb, KERN_ERR, + "Cannot change journaled " + "quota options when quota turned on"); + return 0; + } + qname = match_strdup(args); + if (!qname) { + ext3_msg(sb, KERN_ERR, + "Not enough memory for storing quotafile name"); + return 0; + } + if (sbi->s_qf_names[qtype]) { + int same = !strcmp(sbi->s_qf_names[qtype], qname); + + kfree(qname); + if (!same) { + ext3_msg(sb, KERN_ERR, + "%s quota file already specified", + QTYPE2NAME(qtype)); + } + return same; + } + if (strchr(qname, '/')) { + ext3_msg(sb, KERN_ERR, + "quotafile must be on filesystem root"); + kfree(qname); + return 0; + } + sbi->s_qf_names[qtype] = qname; + set_opt(sbi->s_mount_opt, QUOTA); + return 1; +} + +static int clear_qf_name(struct super_block *sb, int qtype) { + + struct ext3_sb_info *sbi = EXT3_SB(sb); + + if (sb_any_quota_loaded(sb) && + sbi->s_qf_names[qtype]) { + ext3_msg(sb, KERN_ERR, "Cannot change journaled quota options" + " when quota turned on"); + return 0; + } + if (sbi->s_qf_names[qtype]) { + kfree(sbi->s_qf_names[qtype]); + sbi->s_qf_names[qtype] = NULL; + } + return 1; +} +#endif + +static int parse_options (char *options, struct super_block *sb, + unsigned int *inum, unsigned long *journal_devnum, + ext3_fsblk_t *n_blocks_count, int is_remount) +{ + struct ext3_sb_info *sbi = EXT3_SB(sb); + char * p; + substring_t args[MAX_OPT_ARGS]; + int data_opt = 0; + int option; + kuid_t uid; + kgid_t gid; + char *journal_path; + struct inode *journal_inode; + struct path path; + int error; + +#ifdef CONFIG_QUOTA + int qfmt; +#endif + + if (!options) + return 1; + + while ((p = strsep (&options, ",")) != NULL) { + int token; + if (!*p) + continue; + /* + * Initialize args struct so we know whether arg was + * found; some options take optional arguments. + */ + args[0].to = args[0].from = NULL; + token = match_token(p, tokens, args); + switch (token) { + case Opt_bsd_df: + clear_opt (sbi->s_mount_opt, MINIX_DF); + break; + case Opt_minix_df: + set_opt (sbi->s_mount_opt, MINIX_DF); + break; + case Opt_grpid: + set_opt (sbi->s_mount_opt, GRPID); + break; + case Opt_nogrpid: + clear_opt (sbi->s_mount_opt, GRPID); + break; + case Opt_resuid: + if (match_int(&args[0], &option)) + return 0; + uid = make_kuid(current_user_ns(), option); + if (!uid_valid(uid)) { + ext3_msg(sb, KERN_ERR, "Invalid uid value %d", option); + return 0; + + } + sbi->s_resuid = uid; + break; + case Opt_resgid: + if (match_int(&args[0], &option)) + return 0; + gid = make_kgid(current_user_ns(), option); + if (!gid_valid(gid)) { + ext3_msg(sb, KERN_ERR, "Invalid gid value %d", option); + return 0; + } + sbi->s_resgid = gid; + break; + case Opt_sb: + /* handled by get_sb_block() instead of here */ + /* *sb_block = match_int(&args[0]); */ + break; + case Opt_err_panic: + clear_opt (sbi->s_mount_opt, ERRORS_CONT); + clear_opt (sbi->s_mount_opt, ERRORS_RO); + set_opt (sbi->s_mount_opt, ERRORS_PANIC); + break; + case Opt_err_ro: + clear_opt (sbi->s_mount_opt, ERRORS_CONT); + clear_opt (sbi->s_mount_opt, ERRORS_PANIC); + set_opt (sbi->s_mount_opt, ERRORS_RO); + break; + case Opt_err_cont: + clear_opt (sbi->s_mount_opt, ERRORS_RO); + clear_opt (sbi->s_mount_opt, ERRORS_PANIC); + set_opt (sbi->s_mount_opt, ERRORS_CONT); + break; + case Opt_nouid32: + set_opt (sbi->s_mount_opt, NO_UID32); + break; + case Opt_nocheck: + clear_opt (sbi->s_mount_opt, CHECK); + break; + case Opt_debug: + set_opt (sbi->s_mount_opt, DEBUG); + break; + case Opt_oldalloc: + ext3_msg(sb, KERN_WARNING, + "Ignoring deprecated oldalloc option"); + break; + case Opt_orlov: + ext3_msg(sb, KERN_WARNING, + "Ignoring deprecated orlov option"); + break; +#ifdef CONFIG_EXT3_FS_XATTR + case Opt_user_xattr: + set_opt (sbi->s_mount_opt, XATTR_USER); + break; + case Opt_nouser_xattr: + clear_opt (sbi->s_mount_opt, XATTR_USER); + break; +#else + case Opt_user_xattr: + case Opt_nouser_xattr: + ext3_msg(sb, KERN_INFO, + "(no)user_xattr options not supported"); + break; +#endif +#ifdef CONFIG_EXT3_FS_POSIX_ACL + case Opt_acl: + set_opt(sbi->s_mount_opt, POSIX_ACL); + break; + case Opt_noacl: + clear_opt(sbi->s_mount_opt, POSIX_ACL); + break; +#else + case Opt_acl: + case Opt_noacl: + ext3_msg(sb, KERN_INFO, + "(no)acl options not supported"); + break; +#endif + case Opt_reservation: + set_opt(sbi->s_mount_opt, RESERVATION); + break; + case Opt_noreservation: + clear_opt(sbi->s_mount_opt, RESERVATION); + break; + case Opt_journal_update: + /* @@@ FIXME */ + /* Eventually we will want to be able to create + a journal file here. For now, only allow the + user to specify an existing inode to be the + journal file. */ + if (is_remount) { + ext3_msg(sb, KERN_ERR, "error: cannot specify " + "journal on remount"); + return 0; + } + set_opt (sbi->s_mount_opt, UPDATE_JOURNAL); + break; + case Opt_journal_inum: + if (is_remount) { + ext3_msg(sb, KERN_ERR, "error: cannot specify " + "journal on remount"); + return 0; + } + if (match_int(&args[0], &option)) + return 0; + *inum = option; + break; + case Opt_journal_dev: + if (is_remount) { + ext3_msg(sb, KERN_ERR, "error: cannot specify " + "journal on remount"); + return 0; + } + if (match_int(&args[0], &option)) + return 0; + *journal_devnum = option; + break; + case Opt_journal_path: + if (is_remount) { + ext3_msg(sb, KERN_ERR, "error: cannot specify " + "journal on remount"); + return 0; + } + + journal_path = match_strdup(&args[0]); + if (!journal_path) { + ext3_msg(sb, KERN_ERR, "error: could not dup " + "journal device string"); + return 0; + } + + error = kern_path(journal_path, LOOKUP_FOLLOW, &path); + if (error) { + ext3_msg(sb, KERN_ERR, "error: could not find " + "journal device path: error %d", error); + kfree(journal_path); + return 0; + } + + journal_inode = d_inode(path.dentry); + if (!S_ISBLK(journal_inode->i_mode)) { + ext3_msg(sb, KERN_ERR, "error: journal path %s " + "is not a block device", journal_path); + path_put(&path); + kfree(journal_path); + return 0; + } + + *journal_devnum = new_encode_dev(journal_inode->i_rdev); + path_put(&path); + kfree(journal_path); + break; + case Opt_noload: + set_opt (sbi->s_mount_opt, NOLOAD); + break; + case Opt_commit: + if (match_int(&args[0], &option)) + return 0; + if (option < 0) + return 0; + if (option == 0) + option = JBD_DEFAULT_MAX_COMMIT_AGE; + sbi->s_commit_interval = HZ * option; + break; + case Opt_data_journal: + data_opt = EXT3_MOUNT_JOURNAL_DATA; + goto datacheck; + case Opt_data_ordered: + data_opt = EXT3_MOUNT_ORDERED_DATA; + goto datacheck; + case Opt_data_writeback: + data_opt = EXT3_MOUNT_WRITEBACK_DATA; + datacheck: + if (is_remount) { + if (test_opt(sb, DATA_FLAGS) == data_opt) + break; + ext3_msg(sb, KERN_ERR, + "error: cannot change " + "data mode on remount. The filesystem " + "is mounted in data=%s mode and you " + "try to remount it in data=%s mode.", + data_mode_string(test_opt(sb, + DATA_FLAGS)), + data_mode_string(data_opt)); + return 0; + } else { + clear_opt(sbi->s_mount_opt, DATA_FLAGS); + sbi->s_mount_opt |= data_opt; + } + break; + case Opt_data_err_abort: + set_opt(sbi->s_mount_opt, DATA_ERR_ABORT); + break; + case Opt_data_err_ignore: + clear_opt(sbi->s_mount_opt, DATA_ERR_ABORT); + break; +#ifdef CONFIG_QUOTA + case Opt_usrjquota: + if (!set_qf_name(sb, USRQUOTA, &args[0])) + return 0; + break; + case Opt_grpjquota: + if (!set_qf_name(sb, GRPQUOTA, &args[0])) + return 0; + break; + case Opt_offusrjquota: + if (!clear_qf_name(sb, USRQUOTA)) + return 0; + break; + case Opt_offgrpjquota: + if (!clear_qf_name(sb, GRPQUOTA)) + return 0; + break; + case Opt_jqfmt_vfsold: + qfmt = QFMT_VFS_OLD; + goto set_qf_format; + case Opt_jqfmt_vfsv0: + qfmt = QFMT_VFS_V0; + goto set_qf_format; + case Opt_jqfmt_vfsv1: + qfmt = QFMT_VFS_V1; +set_qf_format: + if (sb_any_quota_loaded(sb) && + sbi->s_jquota_fmt != qfmt) { + ext3_msg(sb, KERN_ERR, "error: cannot change " + "journaled quota options when " + "quota turned on."); + return 0; + } + sbi->s_jquota_fmt = qfmt; + break; + case Opt_quota: + case Opt_usrquota: + set_opt(sbi->s_mount_opt, QUOTA); + set_opt(sbi->s_mount_opt, USRQUOTA); + break; + case Opt_grpquota: + set_opt(sbi->s_mount_opt, QUOTA); + set_opt(sbi->s_mount_opt, GRPQUOTA); + break; + case Opt_noquota: + if (sb_any_quota_loaded(sb)) { + ext3_msg(sb, KERN_ERR, "error: cannot change " + "quota options when quota turned on."); + return 0; + } + clear_opt(sbi->s_mount_opt, QUOTA); + clear_opt(sbi->s_mount_opt, USRQUOTA); + clear_opt(sbi->s_mount_opt, GRPQUOTA); + break; +#else + case Opt_quota: + case Opt_usrquota: + case Opt_grpquota: + ext3_msg(sb, KERN_ERR, + "error: quota options not supported."); + break; + case Opt_usrjquota: + case Opt_grpjquota: + case Opt_offusrjquota: + case Opt_offgrpjquota: + case Opt_jqfmt_vfsold: + case Opt_jqfmt_vfsv0: + case Opt_jqfmt_vfsv1: + ext3_msg(sb, KERN_ERR, + "error: journaled quota options not " + "supported."); + break; + case Opt_noquota: + break; +#endif + case Opt_abort: + set_opt(sbi->s_mount_opt, ABORT); + break; + case Opt_nobarrier: + clear_opt(sbi->s_mount_opt, BARRIER); + break; + case Opt_barrier: + if (args[0].from) { + if (match_int(&args[0], &option)) + return 0; + } else + option = 1; /* No argument, default to 1 */ + if (option) + set_opt(sbi->s_mount_opt, BARRIER); + else + clear_opt(sbi->s_mount_opt, BARRIER); + break; + case Opt_ignore: + break; + case Opt_resize: + if (!is_remount) { + ext3_msg(sb, KERN_ERR, + "error: resize option only available " + "for remount"); + return 0; + } + if (match_int(&args[0], &option) != 0) + return 0; + *n_blocks_count = option; + break; + case Opt_nobh: + ext3_msg(sb, KERN_WARNING, + "warning: ignoring deprecated nobh option"); + break; + case Opt_bh: + ext3_msg(sb, KERN_WARNING, + "warning: ignoring deprecated bh option"); + break; + default: + ext3_msg(sb, KERN_ERR, + "error: unrecognized mount option \"%s\" " + "or missing value", p); + return 0; + } + } +#ifdef CONFIG_QUOTA + if (sbi->s_qf_names[USRQUOTA] || sbi->s_qf_names[GRPQUOTA]) { + if (test_opt(sb, USRQUOTA) && sbi->s_qf_names[USRQUOTA]) + clear_opt(sbi->s_mount_opt, USRQUOTA); + if (test_opt(sb, GRPQUOTA) && sbi->s_qf_names[GRPQUOTA]) + clear_opt(sbi->s_mount_opt, GRPQUOTA); + + if (test_opt(sb, GRPQUOTA) || test_opt(sb, USRQUOTA)) { + ext3_msg(sb, KERN_ERR, "error: old and new quota " + "format mixing."); + return 0; + } + + if (!sbi->s_jquota_fmt) { + ext3_msg(sb, KERN_ERR, "error: journaled quota format " + "not specified."); + return 0; + } + } +#endif + return 1; +} + +static int ext3_setup_super(struct super_block *sb, struct ext3_super_block *es, + int read_only) +{ + struct ext3_sb_info *sbi = EXT3_SB(sb); + int res = 0; + + if (le32_to_cpu(es->s_rev_level) > EXT3_MAX_SUPP_REV) { + ext3_msg(sb, KERN_ERR, + "error: revision level too high, " + "forcing read-only mode"); + res = MS_RDONLY; + } + if (read_only) + return res; + if (!(sbi->s_mount_state & EXT3_VALID_FS)) + ext3_msg(sb, KERN_WARNING, + "warning: mounting unchecked fs, " + "running e2fsck is recommended"); + else if ((sbi->s_mount_state & EXT3_ERROR_FS)) + ext3_msg(sb, KERN_WARNING, + "warning: mounting fs with errors, " + "running e2fsck is recommended"); + else if ((__s16) le16_to_cpu(es->s_max_mnt_count) > 0 && + le16_to_cpu(es->s_mnt_count) >= + le16_to_cpu(es->s_max_mnt_count)) + ext3_msg(sb, KERN_WARNING, + "warning: maximal mount count reached, " + "running e2fsck is recommended"); + else if (le32_to_cpu(es->s_checkinterval) && + (le32_to_cpu(es->s_lastcheck) + + le32_to_cpu(es->s_checkinterval) <= get_seconds())) + ext3_msg(sb, KERN_WARNING, + "warning: checktime reached, " + "running e2fsck is recommended"); +#if 0 + /* @@@ We _will_ want to clear the valid bit if we find + inconsistencies, to force a fsck at reboot. But for + a plain journaled filesystem we can keep it set as + valid forever! :) */ + es->s_state &= cpu_to_le16(~EXT3_VALID_FS); +#endif + if (!le16_to_cpu(es->s_max_mnt_count)) + es->s_max_mnt_count = cpu_to_le16(EXT3_DFL_MAX_MNT_COUNT); + le16_add_cpu(&es->s_mnt_count, 1); + es->s_mtime = cpu_to_le32(get_seconds()); + ext3_update_dynamic_rev(sb); + EXT3_SET_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); + + ext3_commit_super(sb, es, 1); + if (test_opt(sb, DEBUG)) + ext3_msg(sb, KERN_INFO, "[bs=%lu, gc=%lu, " + "bpg=%lu, ipg=%lu, mo=%04lx]", + sb->s_blocksize, + sbi->s_groups_count, + EXT3_BLOCKS_PER_GROUP(sb), + EXT3_INODES_PER_GROUP(sb), + sbi->s_mount_opt); + + if (EXT3_SB(sb)->s_journal->j_inode == NULL) { + char b[BDEVNAME_SIZE]; + ext3_msg(sb, KERN_INFO, "using external journal on %s", + bdevname(EXT3_SB(sb)->s_journal->j_dev, b)); + } else { + ext3_msg(sb, KERN_INFO, "using internal journal"); + } + cleancache_init_fs(sb); + return res; +} + +/* Called at mount-time, super-block is locked */ +static int ext3_check_descriptors(struct super_block *sb) +{ + struct ext3_sb_info *sbi = EXT3_SB(sb); + int i; + + ext3_debug ("Checking group descriptors"); + + for (i = 0; i < sbi->s_groups_count; i++) { + struct ext3_group_desc *gdp = ext3_get_group_desc(sb, i, NULL); + ext3_fsblk_t first_block = ext3_group_first_block_no(sb, i); + ext3_fsblk_t last_block; + + if (i == sbi->s_groups_count - 1) + last_block = le32_to_cpu(sbi->s_es->s_blocks_count) - 1; + else + last_block = first_block + + (EXT3_BLOCKS_PER_GROUP(sb) - 1); + + if (le32_to_cpu(gdp->bg_block_bitmap) < first_block || + le32_to_cpu(gdp->bg_block_bitmap) > last_block) + { + ext3_error (sb, "ext3_check_descriptors", + "Block bitmap for group %d" + " not in group (block %lu)!", + i, (unsigned long) + le32_to_cpu(gdp->bg_block_bitmap)); + return 0; + } + if (le32_to_cpu(gdp->bg_inode_bitmap) < first_block || + le32_to_cpu(gdp->bg_inode_bitmap) > last_block) + { + ext3_error (sb, "ext3_check_descriptors", + "Inode bitmap for group %d" + " not in group (block %lu)!", + i, (unsigned long) + le32_to_cpu(gdp->bg_inode_bitmap)); + return 0; + } + if (le32_to_cpu(gdp->bg_inode_table) < first_block || + le32_to_cpu(gdp->bg_inode_table) + sbi->s_itb_per_group - 1 > + last_block) + { + ext3_error (sb, "ext3_check_descriptors", + "Inode table for group %d" + " not in group (block %lu)!", + i, (unsigned long) + le32_to_cpu(gdp->bg_inode_table)); + return 0; + } + } + + sbi->s_es->s_free_blocks_count=cpu_to_le32(ext3_count_free_blocks(sb)); + sbi->s_es->s_free_inodes_count=cpu_to_le32(ext3_count_free_inodes(sb)); + return 1; +} + + +/* ext3_orphan_cleanup() walks a singly-linked list of inodes (starting at + * the superblock) which were deleted from all directories, but held open by + * a process at the time of a crash. We walk the list and try to delete these + * inodes at recovery time (only with a read-write filesystem). + * + * In order to keep the orphan inode chain consistent during traversal (in + * case of crash during recovery), we link each inode into the superblock + * orphan list_head and handle it the same way as an inode deletion during + * normal operation (which journals the operations for us). + * + * We only do an iget() and an iput() on each inode, which is very safe if we + * accidentally point at an in-use or already deleted inode. The worst that + * can happen in this case is that we get a "bit already cleared" message from + * ext3_free_inode(). The only reason we would point at a wrong inode is if + * e2fsck was run on this filesystem, and it must have already done the orphan + * inode cleanup for us, so we can safely abort without any further action. + */ +static void ext3_orphan_cleanup (struct super_block * sb, + struct ext3_super_block * es) +{ + unsigned int s_flags = sb->s_flags; + int nr_orphans = 0, nr_truncates = 0; +#ifdef CONFIG_QUOTA + int i; +#endif + if (!es->s_last_orphan) { + jbd_debug(4, "no orphan inodes to clean up\n"); + return; + } + + if (bdev_read_only(sb->s_bdev)) { + ext3_msg(sb, KERN_ERR, "error: write access " + "unavailable, skipping orphan cleanup."); + return; + } + + /* Check if feature set allows readwrite operations */ + if (EXT3_HAS_RO_COMPAT_FEATURE(sb, ~EXT3_FEATURE_RO_COMPAT_SUPP)) { + ext3_msg(sb, KERN_INFO, "Skipping orphan cleanup due to " + "unknown ROCOMPAT features"); + return; + } + + if (EXT3_SB(sb)->s_mount_state & EXT3_ERROR_FS) { + /* don't clear list on RO mount w/ errors */ + if (es->s_last_orphan && !(s_flags & MS_RDONLY)) { + jbd_debug(1, "Errors on filesystem, " + "clearing orphan list.\n"); + es->s_last_orphan = 0; + } + jbd_debug(1, "Skipping orphan recovery on fs with errors.\n"); + return; + } + + if (s_flags & MS_RDONLY) { + ext3_msg(sb, KERN_INFO, "orphan cleanup on readonly fs"); + sb->s_flags &= ~MS_RDONLY; + } +#ifdef CONFIG_QUOTA + /* Needed for iput() to work correctly and not trash data */ + sb->s_flags |= MS_ACTIVE; + /* Turn on quotas so that they are updated correctly */ + for (i = 0; i < EXT3_MAXQUOTAS; i++) { + if (EXT3_SB(sb)->s_qf_names[i]) { + int ret = ext3_quota_on_mount(sb, i); + if (ret < 0) + ext3_msg(sb, KERN_ERR, + "error: cannot turn on journaled " + "quota: %d", ret); + } + } +#endif + + while (es->s_last_orphan) { + struct inode *inode; + + inode = ext3_orphan_get(sb, le32_to_cpu(es->s_last_orphan)); + if (IS_ERR(inode)) { + es->s_last_orphan = 0; + break; + } + + list_add(&EXT3_I(inode)->i_orphan, &EXT3_SB(sb)->s_orphan); + dquot_initialize(inode); + if (inode->i_nlink) { + printk(KERN_DEBUG + "%s: truncating inode %lu to %Ld bytes\n", + __func__, inode->i_ino, inode->i_size); + jbd_debug(2, "truncating inode %lu to %Ld bytes\n", + inode->i_ino, inode->i_size); + ext3_truncate(inode); + nr_truncates++; + } else { + printk(KERN_DEBUG + "%s: deleting unreferenced inode %lu\n", + __func__, inode->i_ino); + jbd_debug(2, "deleting unreferenced inode %lu\n", + inode->i_ino); + nr_orphans++; + } + iput(inode); /* The delete magic happens here! */ + } + +#define PLURAL(x) (x), ((x)==1) ? "" : "s" + + if (nr_orphans) + ext3_msg(sb, KERN_INFO, "%d orphan inode%s deleted", + PLURAL(nr_orphans)); + if (nr_truncates) + ext3_msg(sb, KERN_INFO, "%d truncate%s cleaned up", + PLURAL(nr_truncates)); +#ifdef CONFIG_QUOTA + /* Turn quotas off */ + for (i = 0; i < EXT3_MAXQUOTAS; i++) { + if (sb_dqopt(sb)->files[i]) + dquot_quota_off(sb, i); + } +#endif + sb->s_flags = s_flags; /* Restore MS_RDONLY status */ +} + +/* + * Maximal file size. There is a direct, and {,double-,triple-}indirect + * block limit, and also a limit of (2^32 - 1) 512-byte sectors in i_blocks. + * We need to be 1 filesystem block less than the 2^32 sector limit. + */ +static loff_t ext3_max_size(int bits) +{ + loff_t res = EXT3_NDIR_BLOCKS; + int meta_blocks; + loff_t upper_limit; + + /* This is calculated to be the largest file size for a + * dense, file such that the total number of + * sectors in the file, including data and all indirect blocks, + * does not exceed 2^32 -1 + * __u32 i_blocks representing the total number of + * 512 bytes blocks of the file + */ + upper_limit = (1LL << 32) - 1; + + /* total blocks in file system block size */ + upper_limit >>= (bits - 9); + + + /* indirect blocks */ + meta_blocks = 1; + /* double indirect blocks */ + meta_blocks += 1 + (1LL << (bits-2)); + /* tripple indirect blocks */ + meta_blocks += 1 + (1LL << (bits-2)) + (1LL << (2*(bits-2))); + + upper_limit -= meta_blocks; + upper_limit <<= bits; + + res += 1LL << (bits-2); + res += 1LL << (2*(bits-2)); + res += 1LL << (3*(bits-2)); + res <<= bits; + if (res > upper_limit) + res = upper_limit; + + if (res > MAX_LFS_FILESIZE) + res = MAX_LFS_FILESIZE; + + return res; +} + +static ext3_fsblk_t descriptor_loc(struct super_block *sb, + ext3_fsblk_t logic_sb_block, + int nr) +{ + struct ext3_sb_info *sbi = EXT3_SB(sb); + unsigned long bg, first_meta_bg; + int has_super = 0; + + first_meta_bg = le32_to_cpu(sbi->s_es->s_first_meta_bg); + + if (!EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_META_BG) || + nr < first_meta_bg) + return (logic_sb_block + nr + 1); + bg = sbi->s_desc_per_block * nr; + if (ext3_bg_has_super(sb, bg)) + has_super = 1; + return (has_super + ext3_group_first_block_no(sb, bg)); +} + + +static int ext3_fill_super (struct super_block *sb, void *data, int silent) +{ + struct buffer_head * bh; + struct ext3_super_block *es = NULL; + struct ext3_sb_info *sbi; + ext3_fsblk_t block; + ext3_fsblk_t sb_block = get_sb_block(&data, sb); + ext3_fsblk_t logic_sb_block; + unsigned long offset = 0; + unsigned int journal_inum = 0; + unsigned long journal_devnum = 0; + unsigned long def_mount_opts; + struct inode *root; + int blocksize; + int hblock; + int db_count; + int i; + int needs_recovery; + int ret = -EINVAL; + __le32 features; + int err; + + sbi = kzalloc(sizeof(*sbi), GFP_KERNEL); + if (!sbi) + return -ENOMEM; + + sbi->s_blockgroup_lock = + kzalloc(sizeof(struct blockgroup_lock), GFP_KERNEL); + if (!sbi->s_blockgroup_lock) { + kfree(sbi); + return -ENOMEM; + } + sb->s_fs_info = sbi; + sbi->s_sb_block = sb_block; + + blocksize = sb_min_blocksize(sb, EXT3_MIN_BLOCK_SIZE); + if (!blocksize) { + ext3_msg(sb, KERN_ERR, "error: unable to set blocksize"); + goto out_fail; + } + + /* + * The ext3 superblock will not be buffer aligned for other than 1kB + * block sizes. We need to calculate the offset from buffer start. + */ + if (blocksize != EXT3_MIN_BLOCK_SIZE) { + logic_sb_block = (sb_block * EXT3_MIN_BLOCK_SIZE) / blocksize; + offset = (sb_block * EXT3_MIN_BLOCK_SIZE) % blocksize; + } else { + logic_sb_block = sb_block; + } + + if (!(bh = sb_bread(sb, logic_sb_block))) { + ext3_msg(sb, KERN_ERR, "error: unable to read superblock"); + goto out_fail; + } + /* + * Note: s_es must be initialized as soon as possible because + * some ext3 macro-instructions depend on its value + */ + es = (struct ext3_super_block *) (bh->b_data + offset); + sbi->s_es = es; + sb->s_magic = le16_to_cpu(es->s_magic); + if (sb->s_magic != EXT3_SUPER_MAGIC) + goto cantfind_ext3; + + /* Set defaults before we parse the mount options */ + def_mount_opts = le32_to_cpu(es->s_default_mount_opts); + if (def_mount_opts & EXT3_DEFM_DEBUG) + set_opt(sbi->s_mount_opt, DEBUG); + if (def_mount_opts & EXT3_DEFM_BSDGROUPS) + set_opt(sbi->s_mount_opt, GRPID); + if (def_mount_opts & EXT3_DEFM_UID16) + set_opt(sbi->s_mount_opt, NO_UID32); +#ifdef CONFIG_EXT3_FS_XATTR + if (def_mount_opts & EXT3_DEFM_XATTR_USER) + set_opt(sbi->s_mount_opt, XATTR_USER); +#endif +#ifdef CONFIG_EXT3_FS_POSIX_ACL + if (def_mount_opts & EXT3_DEFM_ACL) + set_opt(sbi->s_mount_opt, POSIX_ACL); +#endif + if ((def_mount_opts & EXT3_DEFM_JMODE) == EXT3_DEFM_JMODE_DATA) + set_opt(sbi->s_mount_opt, JOURNAL_DATA); + else if ((def_mount_opts & EXT3_DEFM_JMODE) == EXT3_DEFM_JMODE_ORDERED) + set_opt(sbi->s_mount_opt, ORDERED_DATA); + else if ((def_mount_opts & EXT3_DEFM_JMODE) == EXT3_DEFM_JMODE_WBACK) + set_opt(sbi->s_mount_opt, WRITEBACK_DATA); + + if (le16_to_cpu(sbi->s_es->s_errors) == EXT3_ERRORS_PANIC) + set_opt(sbi->s_mount_opt, ERRORS_PANIC); + else if (le16_to_cpu(sbi->s_es->s_errors) == EXT3_ERRORS_CONTINUE) + set_opt(sbi->s_mount_opt, ERRORS_CONT); + else + set_opt(sbi->s_mount_opt, ERRORS_RO); + + sbi->s_resuid = make_kuid(&init_user_ns, le16_to_cpu(es->s_def_resuid)); + sbi->s_resgid = make_kgid(&init_user_ns, le16_to_cpu(es->s_def_resgid)); + + /* enable barriers by default */ + set_opt(sbi->s_mount_opt, BARRIER); + set_opt(sbi->s_mount_opt, RESERVATION); + + if (!parse_options ((char *) data, sb, &journal_inum, &journal_devnum, + NULL, 0)) + goto failed_mount; + + sb->s_flags = (sb->s_flags & ~MS_POSIXACL) | + (test_opt(sb, POSIX_ACL) ? MS_POSIXACL : 0); + + if (le32_to_cpu(es->s_rev_level) == EXT3_GOOD_OLD_REV && + (EXT3_HAS_COMPAT_FEATURE(sb, ~0U) || + EXT3_HAS_RO_COMPAT_FEATURE(sb, ~0U) || + EXT3_HAS_INCOMPAT_FEATURE(sb, ~0U))) + ext3_msg(sb, KERN_WARNING, + "warning: feature flags set on rev 0 fs, " + "running e2fsck is recommended"); + /* + * Check feature flags regardless of the revision level, since we + * previously didn't change the revision level when setting the flags, + * so there is a chance incompat flags are set on a rev 0 filesystem. + */ + features = EXT3_HAS_INCOMPAT_FEATURE(sb, ~EXT3_FEATURE_INCOMPAT_SUPP); + if (features) { + ext3_msg(sb, KERN_ERR, + "error: couldn't mount because of unsupported " + "optional features (%x)", le32_to_cpu(features)); + goto failed_mount; + } + features = EXT3_HAS_RO_COMPAT_FEATURE(sb, ~EXT3_FEATURE_RO_COMPAT_SUPP); + if (!(sb->s_flags & MS_RDONLY) && features) { + ext3_msg(sb, KERN_ERR, + "error: couldn't mount RDWR because of unsupported " + "optional features (%x)", le32_to_cpu(features)); + goto failed_mount; + } + blocksize = BLOCK_SIZE << le32_to_cpu(es->s_log_block_size); + + if (blocksize < EXT3_MIN_BLOCK_SIZE || + blocksize > EXT3_MAX_BLOCK_SIZE) { + ext3_msg(sb, KERN_ERR, + "error: couldn't mount because of unsupported " + "filesystem blocksize %d", blocksize); + goto failed_mount; + } + + hblock = bdev_logical_block_size(sb->s_bdev); + if (sb->s_blocksize != blocksize) { + /* + * Make sure the blocksize for the filesystem is larger + * than the hardware sectorsize for the machine. + */ + if (blocksize < hblock) { + ext3_msg(sb, KERN_ERR, + "error: fsblocksize %d too small for " + "hardware sectorsize %d", blocksize, hblock); + goto failed_mount; + } + + brelse (bh); + if (!sb_set_blocksize(sb, blocksize)) { + ext3_msg(sb, KERN_ERR, + "error: bad blocksize %d", blocksize); + goto out_fail; + } + logic_sb_block = (sb_block * EXT3_MIN_BLOCK_SIZE) / blocksize; + offset = (sb_block * EXT3_MIN_BLOCK_SIZE) % blocksize; + bh = sb_bread(sb, logic_sb_block); + if (!bh) { + ext3_msg(sb, KERN_ERR, + "error: can't read superblock on 2nd try"); + goto failed_mount; + } + es = (struct ext3_super_block *)(bh->b_data + offset); + sbi->s_es = es; + if (es->s_magic != cpu_to_le16(EXT3_SUPER_MAGIC)) { + ext3_msg(sb, KERN_ERR, + "error: magic mismatch"); + goto failed_mount; + } + } + + sb->s_maxbytes = ext3_max_size(sb->s_blocksize_bits); + + if (le32_to_cpu(es->s_rev_level) == EXT3_GOOD_OLD_REV) { + sbi->s_inode_size = EXT3_GOOD_OLD_INODE_SIZE; + sbi->s_first_ino = EXT3_GOOD_OLD_FIRST_INO; + } else { + sbi->s_inode_size = le16_to_cpu(es->s_inode_size); + sbi->s_first_ino = le32_to_cpu(es->s_first_ino); + if ((sbi->s_inode_size < EXT3_GOOD_OLD_INODE_SIZE) || + (!is_power_of_2(sbi->s_inode_size)) || + (sbi->s_inode_size > blocksize)) { + ext3_msg(sb, KERN_ERR, + "error: unsupported inode size: %d", + sbi->s_inode_size); + goto failed_mount; + } + } + sbi->s_frag_size = EXT3_MIN_FRAG_SIZE << + le32_to_cpu(es->s_log_frag_size); + if (blocksize != sbi->s_frag_size) { + ext3_msg(sb, KERN_ERR, + "error: fragsize %lu != blocksize %u (unsupported)", + sbi->s_frag_size, blocksize); + goto failed_mount; + } + sbi->s_frags_per_block = 1; + sbi->s_blocks_per_group = le32_to_cpu(es->s_blocks_per_group); + sbi->s_frags_per_group = le32_to_cpu(es->s_frags_per_group); + sbi->s_inodes_per_group = le32_to_cpu(es->s_inodes_per_group); + if (EXT3_INODE_SIZE(sb) == 0 || EXT3_INODES_PER_GROUP(sb) == 0) + goto cantfind_ext3; + sbi->s_inodes_per_block = blocksize / EXT3_INODE_SIZE(sb); + if (sbi->s_inodes_per_block == 0) + goto cantfind_ext3; + sbi->s_itb_per_group = sbi->s_inodes_per_group / + sbi->s_inodes_per_block; + sbi->s_desc_per_block = blocksize / sizeof(struct ext3_group_desc); + sbi->s_sbh = bh; + sbi->s_mount_state = le16_to_cpu(es->s_state); + sbi->s_addr_per_block_bits = ilog2(EXT3_ADDR_PER_BLOCK(sb)); + sbi->s_desc_per_block_bits = ilog2(EXT3_DESC_PER_BLOCK(sb)); + for (i=0; i < 4; i++) + sbi->s_hash_seed[i] = le32_to_cpu(es->s_hash_seed[i]); + sbi->s_def_hash_version = es->s_def_hash_version; + i = le32_to_cpu(es->s_flags); + if (i & EXT2_FLAGS_UNSIGNED_HASH) + sbi->s_hash_unsigned = 3; + else if ((i & EXT2_FLAGS_SIGNED_HASH) == 0) { +#ifdef __CHAR_UNSIGNED__ + es->s_flags |= cpu_to_le32(EXT2_FLAGS_UNSIGNED_HASH); + sbi->s_hash_unsigned = 3; +#else + es->s_flags |= cpu_to_le32(EXT2_FLAGS_SIGNED_HASH); +#endif + } + + if (sbi->s_blocks_per_group > blocksize * 8) { + ext3_msg(sb, KERN_ERR, + "#blocks per group too big: %lu", + sbi->s_blocks_per_group); + goto failed_mount; + } + if (sbi->s_frags_per_group > blocksize * 8) { + ext3_msg(sb, KERN_ERR, + "error: #fragments per group too big: %lu", + sbi->s_frags_per_group); + goto failed_mount; + } + if (sbi->s_inodes_per_group > blocksize * 8) { + ext3_msg(sb, KERN_ERR, + "error: #inodes per group too big: %lu", + sbi->s_inodes_per_group); + goto failed_mount; + } + + err = generic_check_addressable(sb->s_blocksize_bits, + le32_to_cpu(es->s_blocks_count)); + if (err) { + ext3_msg(sb, KERN_ERR, + "error: filesystem is too large to mount safely"); + if (sizeof(sector_t) < 8) + ext3_msg(sb, KERN_ERR, + "error: CONFIG_LBDAF not enabled"); + ret = err; + goto failed_mount; + } + + if (EXT3_BLOCKS_PER_GROUP(sb) == 0) + goto cantfind_ext3; + sbi->s_groups_count = ((le32_to_cpu(es->s_blocks_count) - + le32_to_cpu(es->s_first_data_block) - 1) + / EXT3_BLOCKS_PER_GROUP(sb)) + 1; + db_count = DIV_ROUND_UP(sbi->s_groups_count, EXT3_DESC_PER_BLOCK(sb)); + sbi->s_group_desc = kmalloc(db_count * sizeof (struct buffer_head *), + GFP_KERNEL); + if (sbi->s_group_desc == NULL) { + ext3_msg(sb, KERN_ERR, + "error: not enough memory"); + ret = -ENOMEM; + goto failed_mount; + } + + bgl_lock_init(sbi->s_blockgroup_lock); + + for (i = 0; i < db_count; i++) { + block = descriptor_loc(sb, logic_sb_block, i); + sbi->s_group_desc[i] = sb_bread(sb, block); + if (!sbi->s_group_desc[i]) { + ext3_msg(sb, KERN_ERR, + "error: can't read group descriptor %d", i); + db_count = i; + goto failed_mount2; + } + } + if (!ext3_check_descriptors (sb)) { + ext3_msg(sb, KERN_ERR, + "error: group descriptors corrupted"); + goto failed_mount2; + } + sbi->s_gdb_count = db_count; + get_random_bytes(&sbi->s_next_generation, sizeof(u32)); + spin_lock_init(&sbi->s_next_gen_lock); + + /* per fileystem reservation list head & lock */ + spin_lock_init(&sbi->s_rsv_window_lock); + sbi->s_rsv_window_root = RB_ROOT; + /* Add a single, static dummy reservation to the start of the + * reservation window list --- it gives us a placeholder for + * append-at-start-of-list which makes the allocation logic + * _much_ simpler. */ + sbi->s_rsv_window_head.rsv_start = EXT3_RESERVE_WINDOW_NOT_ALLOCATED; + sbi->s_rsv_window_head.rsv_end = EXT3_RESERVE_WINDOW_NOT_ALLOCATED; + sbi->s_rsv_window_head.rsv_alloc_hit = 0; + sbi->s_rsv_window_head.rsv_goal_size = 0; + ext3_rsv_window_add(sb, &sbi->s_rsv_window_head); + + /* + * set up enough so that it can read an inode + */ + sb->s_op = &ext3_sops; + sb->s_export_op = &ext3_export_ops; + sb->s_xattr = ext3_xattr_handlers; +#ifdef CONFIG_QUOTA + sb->s_qcop = &ext3_qctl_operations; + sb->dq_op = &ext3_quota_operations; + sb->s_quota_types = QTYPE_MASK_USR | QTYPE_MASK_GRP; +#endif + memcpy(sb->s_uuid, es->s_uuid, sizeof(es->s_uuid)); + INIT_LIST_HEAD(&sbi->s_orphan); /* unlinked but open files */ + mutex_init(&sbi->s_orphan_lock); + mutex_init(&sbi->s_resize_lock); + + sb->s_root = NULL; + + needs_recovery = (es->s_last_orphan != 0 || + EXT3_HAS_INCOMPAT_FEATURE(sb, + EXT3_FEATURE_INCOMPAT_RECOVER)); + + /* + * The first inode we look at is the journal inode. Don't try + * root first: it may be modified in the journal! + */ + if (!test_opt(sb, NOLOAD) && + EXT3_HAS_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_HAS_JOURNAL)) { + if (ext3_load_journal(sb, es, journal_devnum)) + goto failed_mount2; + } else if (journal_inum) { + if (ext3_create_journal(sb, es, journal_inum)) + goto failed_mount2; + } else { + if (!silent) + ext3_msg(sb, KERN_ERR, + "error: no journal found. " + "mounting ext3 over ext2?"); + goto failed_mount2; + } + err = percpu_counter_init(&sbi->s_freeblocks_counter, + ext3_count_free_blocks(sb), GFP_KERNEL); + if (!err) { + err = percpu_counter_init(&sbi->s_freeinodes_counter, + ext3_count_free_inodes(sb), GFP_KERNEL); + } + if (!err) { + err = percpu_counter_init(&sbi->s_dirs_counter, + ext3_count_dirs(sb), GFP_KERNEL); + } + if (err) { + ext3_msg(sb, KERN_ERR, "error: insufficient memory"); + ret = err; + goto failed_mount3; + } + + /* We have now updated the journal if required, so we can + * validate the data journaling mode. */ + switch (test_opt(sb, DATA_FLAGS)) { + case 0: + /* No mode set, assume a default based on the journal + capabilities: ORDERED_DATA if the journal can + cope, else JOURNAL_DATA */ + if (journal_check_available_features + (sbi->s_journal, 0, 0, JFS_FEATURE_INCOMPAT_REVOKE)) + set_opt(sbi->s_mount_opt, DEFAULT_DATA_MODE); + else + set_opt(sbi->s_mount_opt, JOURNAL_DATA); + break; + + case EXT3_MOUNT_ORDERED_DATA: + case EXT3_MOUNT_WRITEBACK_DATA: + if (!journal_check_available_features + (sbi->s_journal, 0, 0, JFS_FEATURE_INCOMPAT_REVOKE)) { + ext3_msg(sb, KERN_ERR, + "error: journal does not support " + "requested data journaling mode"); + goto failed_mount3; + } + default: + break; + } + + /* + * The journal_load will have done any necessary log recovery, + * so we can safely mount the rest of the filesystem now. + */ + + root = ext3_iget(sb, EXT3_ROOT_INO); + if (IS_ERR(root)) { + ext3_msg(sb, KERN_ERR, "error: get root inode failed"); + ret = PTR_ERR(root); + goto failed_mount3; + } + if (!S_ISDIR(root->i_mode) || !root->i_blocks || !root->i_size) { + iput(root); + ext3_msg(sb, KERN_ERR, "error: corrupt root inode, run e2fsck"); + goto failed_mount3; + } + sb->s_root = d_make_root(root); + if (!sb->s_root) { + ext3_msg(sb, KERN_ERR, "error: get root dentry failed"); + ret = -ENOMEM; + goto failed_mount3; + } + + if (ext3_setup_super(sb, es, sb->s_flags & MS_RDONLY)) + sb->s_flags |= MS_RDONLY; + + EXT3_SB(sb)->s_mount_state |= EXT3_ORPHAN_FS; + ext3_orphan_cleanup(sb, es); + EXT3_SB(sb)->s_mount_state &= ~EXT3_ORPHAN_FS; + if (needs_recovery) { + ext3_mark_recovery_complete(sb, es); + ext3_msg(sb, KERN_INFO, "recovery complete"); + } + ext3_msg(sb, KERN_INFO, "mounted filesystem with %s data mode", + test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA ? "journal": + test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA ? "ordered": + "writeback"); + + return 0; + +cantfind_ext3: + if (!silent) + ext3_msg(sb, KERN_INFO, + "error: can't find ext3 filesystem on dev %s.", + sb->s_id); + goto failed_mount; + +failed_mount3: + percpu_counter_destroy(&sbi->s_freeblocks_counter); + percpu_counter_destroy(&sbi->s_freeinodes_counter); + percpu_counter_destroy(&sbi->s_dirs_counter); + journal_destroy(sbi->s_journal); +failed_mount2: + for (i = 0; i < db_count; i++) + brelse(sbi->s_group_desc[i]); + kfree(sbi->s_group_desc); +failed_mount: +#ifdef CONFIG_QUOTA + for (i = 0; i < EXT3_MAXQUOTAS; i++) + kfree(sbi->s_qf_names[i]); +#endif + ext3_blkdev_remove(sbi); + brelse(bh); +out_fail: + sb->s_fs_info = NULL; + kfree(sbi->s_blockgroup_lock); + kfree(sbi); + return ret; +} + +/* + * Setup any per-fs journal parameters now. We'll do this both on + * initial mount, once the journal has been initialised but before we've + * done any recovery; and again on any subsequent remount. + */ +static void ext3_init_journal_params(struct super_block *sb, journal_t *journal) +{ + struct ext3_sb_info *sbi = EXT3_SB(sb); + + if (sbi->s_commit_interval) + journal->j_commit_interval = sbi->s_commit_interval; + /* We could also set up an ext3-specific default for the commit + * interval here, but for now we'll just fall back to the jbd + * default. */ + + spin_lock(&journal->j_state_lock); + if (test_opt(sb, BARRIER)) + journal->j_flags |= JFS_BARRIER; + else + journal->j_flags &= ~JFS_BARRIER; + if (test_opt(sb, DATA_ERR_ABORT)) + journal->j_flags |= JFS_ABORT_ON_SYNCDATA_ERR; + else + journal->j_flags &= ~JFS_ABORT_ON_SYNCDATA_ERR; + spin_unlock(&journal->j_state_lock); +} + +static journal_t *ext3_get_journal(struct super_block *sb, + unsigned int journal_inum) +{ + struct inode *journal_inode; + journal_t *journal; + + /* First, test for the existence of a valid inode on disk. Bad + * things happen if we iget() an unused inode, as the subsequent + * iput() will try to delete it. */ + + journal_inode = ext3_iget(sb, journal_inum); + if (IS_ERR(journal_inode)) { + ext3_msg(sb, KERN_ERR, "error: no journal found"); + return NULL; + } + if (!journal_inode->i_nlink) { + make_bad_inode(journal_inode); + iput(journal_inode); + ext3_msg(sb, KERN_ERR, "error: journal inode is deleted"); + return NULL; + } + + jbd_debug(2, "Journal inode found at %p: %Ld bytes\n", + journal_inode, journal_inode->i_size); + if (!S_ISREG(journal_inode->i_mode)) { + ext3_msg(sb, KERN_ERR, "error: invalid journal inode"); + iput(journal_inode); + return NULL; + } + + journal = journal_init_inode(journal_inode); + if (!journal) { + ext3_msg(sb, KERN_ERR, "error: could not load journal inode"); + iput(journal_inode); + return NULL; + } + journal->j_private = sb; + ext3_init_journal_params(sb, journal); + return journal; +} + +static journal_t *ext3_get_dev_journal(struct super_block *sb, + dev_t j_dev) +{ + struct buffer_head * bh; + journal_t *journal; + ext3_fsblk_t start; + ext3_fsblk_t len; + int hblock, blocksize; + ext3_fsblk_t sb_block; + unsigned long offset; + struct ext3_super_block * es; + struct block_device *bdev; + + bdev = ext3_blkdev_get(j_dev, sb); + if (bdev == NULL) + return NULL; + + blocksize = sb->s_blocksize; + hblock = bdev_logical_block_size(bdev); + if (blocksize < hblock) { + ext3_msg(sb, KERN_ERR, + "error: blocksize too small for journal device"); + goto out_bdev; + } + + sb_block = EXT3_MIN_BLOCK_SIZE / blocksize; + offset = EXT3_MIN_BLOCK_SIZE % blocksize; + set_blocksize(bdev, blocksize); + if (!(bh = __bread(bdev, sb_block, blocksize))) { + ext3_msg(sb, KERN_ERR, "error: couldn't read superblock of " + "external journal"); + goto out_bdev; + } + + es = (struct ext3_super_block *) (bh->b_data + offset); + if ((le16_to_cpu(es->s_magic) != EXT3_SUPER_MAGIC) || + !(le32_to_cpu(es->s_feature_incompat) & + EXT3_FEATURE_INCOMPAT_JOURNAL_DEV)) { + ext3_msg(sb, KERN_ERR, "error: external journal has " + "bad superblock"); + brelse(bh); + goto out_bdev; + } + + if (memcmp(EXT3_SB(sb)->s_es->s_journal_uuid, es->s_uuid, 16)) { + ext3_msg(sb, KERN_ERR, "error: journal UUID does not match"); + brelse(bh); + goto out_bdev; + } + + len = le32_to_cpu(es->s_blocks_count); + start = sb_block + 1; + brelse(bh); /* we're done with the superblock */ + + journal = journal_init_dev(bdev, sb->s_bdev, + start, len, blocksize); + if (!journal) { + ext3_msg(sb, KERN_ERR, + "error: failed to create device journal"); + goto out_bdev; + } + journal->j_private = sb; + if (!bh_uptodate_or_lock(journal->j_sb_buffer)) { + if (bh_submit_read(journal->j_sb_buffer)) { + ext3_msg(sb, KERN_ERR, "I/O error on journal device"); + goto out_journal; + } + } + if (be32_to_cpu(journal->j_superblock->s_nr_users) != 1) { + ext3_msg(sb, KERN_ERR, + "error: external journal has more than one " + "user (unsupported) - %d", + be32_to_cpu(journal->j_superblock->s_nr_users)); + goto out_journal; + } + EXT3_SB(sb)->journal_bdev = bdev; + ext3_init_journal_params(sb, journal); + return journal; +out_journal: + journal_destroy(journal); +out_bdev: + ext3_blkdev_put(bdev); + return NULL; +} + +static int ext3_load_journal(struct super_block *sb, + struct ext3_super_block *es, + unsigned long journal_devnum) +{ + journal_t *journal; + unsigned int journal_inum = le32_to_cpu(es->s_journal_inum); + dev_t journal_dev; + int err = 0; + int really_read_only; + + if (journal_devnum && + journal_devnum != le32_to_cpu(es->s_journal_dev)) { + ext3_msg(sb, KERN_INFO, "external journal device major/minor " + "numbers have changed"); + journal_dev = new_decode_dev(journal_devnum); + } else + journal_dev = new_decode_dev(le32_to_cpu(es->s_journal_dev)); + + really_read_only = bdev_read_only(sb->s_bdev); + + /* + * Are we loading a blank journal or performing recovery after a + * crash? For recovery, we need to check in advance whether we + * can get read-write access to the device. + */ + + if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER)) { + if (sb->s_flags & MS_RDONLY) { + ext3_msg(sb, KERN_INFO, + "recovery required on readonly filesystem"); + if (really_read_only) { + ext3_msg(sb, KERN_ERR, "error: write access " + "unavailable, cannot proceed"); + return -EROFS; + } + ext3_msg(sb, KERN_INFO, + "write access will be enabled during recovery"); + } + } + + if (journal_inum && journal_dev) { + ext3_msg(sb, KERN_ERR, "error: filesystem has both journal " + "and inode journals"); + return -EINVAL; + } + + if (journal_inum) { + if (!(journal = ext3_get_journal(sb, journal_inum))) + return -EINVAL; + } else { + if (!(journal = ext3_get_dev_journal(sb, journal_dev))) + return -EINVAL; + } + + if (!(journal->j_flags & JFS_BARRIER)) + printk(KERN_INFO "EXT3-fs: barriers not enabled\n"); + + if (!really_read_only && test_opt(sb, UPDATE_JOURNAL)) { + err = journal_update_format(journal); + if (err) { + ext3_msg(sb, KERN_ERR, "error updating journal"); + journal_destroy(journal); + return err; + } + } + + if (!EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER)) + err = journal_wipe(journal, !really_read_only); + if (!err) + err = journal_load(journal); + + if (err) { + ext3_msg(sb, KERN_ERR, "error loading journal"); + journal_destroy(journal); + return err; + } + + EXT3_SB(sb)->s_journal = journal; + ext3_clear_journal_err(sb, es); + + if (!really_read_only && journal_devnum && + journal_devnum != le32_to_cpu(es->s_journal_dev)) { + es->s_journal_dev = cpu_to_le32(journal_devnum); + + /* Make sure we flush the recovery flag to disk. */ + ext3_commit_super(sb, es, 1); + } + + return 0; +} + +static int ext3_create_journal(struct super_block *sb, + struct ext3_super_block *es, + unsigned int journal_inum) +{ + journal_t *journal; + int err; + + if (sb->s_flags & MS_RDONLY) { + ext3_msg(sb, KERN_ERR, + "error: readonly filesystem when trying to " + "create journal"); + return -EROFS; + } + + journal = ext3_get_journal(sb, journal_inum); + if (!journal) + return -EINVAL; + + ext3_msg(sb, KERN_INFO, "creating new journal on inode %u", + journal_inum); + + err = journal_create(journal); + if (err) { + ext3_msg(sb, KERN_ERR, "error creating journal"); + journal_destroy(journal); + return -EIO; + } + + EXT3_SB(sb)->s_journal = journal; + + ext3_update_dynamic_rev(sb); + EXT3_SET_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); + EXT3_SET_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_HAS_JOURNAL); + + es->s_journal_inum = cpu_to_le32(journal_inum); + + /* Make sure we flush the recovery flag to disk. */ + ext3_commit_super(sb, es, 1); + + return 0; +} + +static int ext3_commit_super(struct super_block *sb, + struct ext3_super_block *es, + int sync) +{ + struct buffer_head *sbh = EXT3_SB(sb)->s_sbh; + int error = 0; + + if (!sbh) + return error; + + if (buffer_write_io_error(sbh)) { + /* + * Oh, dear. A previous attempt to write the + * superblock failed. This could happen because the + * USB device was yanked out. Or it could happen to + * be a transient write error and maybe the block will + * be remapped. Nothing we can do but to retry the + * write and hope for the best. + */ + ext3_msg(sb, KERN_ERR, "previous I/O error to " + "superblock detected"); + clear_buffer_write_io_error(sbh); + set_buffer_uptodate(sbh); + } + /* + * If the file system is mounted read-only, don't update the + * superblock write time. This avoids updating the superblock + * write time when we are mounting the root file system + * read/only but we need to replay the journal; at that point, + * for people who are east of GMT and who make their clock + * tick in localtime for Windows bug-for-bug compatibility, + * the clock is set in the future, and this will cause e2fsck + * to complain and force a full file system check. + */ + if (!(sb->s_flags & MS_RDONLY)) + es->s_wtime = cpu_to_le32(get_seconds()); + es->s_free_blocks_count = cpu_to_le32(ext3_count_free_blocks(sb)); + es->s_free_inodes_count = cpu_to_le32(ext3_count_free_inodes(sb)); + BUFFER_TRACE(sbh, "marking dirty"); + mark_buffer_dirty(sbh); + if (sync) { + error = sync_dirty_buffer(sbh); + if (buffer_write_io_error(sbh)) { + ext3_msg(sb, KERN_ERR, "I/O error while writing " + "superblock"); + clear_buffer_write_io_error(sbh); + set_buffer_uptodate(sbh); + } + } + return error; +} + + +/* + * Have we just finished recovery? If so, and if we are mounting (or + * remounting) the filesystem readonly, then we will end up with a + * consistent fs on disk. Record that fact. + */ +static void ext3_mark_recovery_complete(struct super_block * sb, + struct ext3_super_block * es) +{ + journal_t *journal = EXT3_SB(sb)->s_journal; + + journal_lock_updates(journal); + if (journal_flush(journal) < 0) + goto out; + + if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER) && + sb->s_flags & MS_RDONLY) { + EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); + ext3_commit_super(sb, es, 1); + } + +out: + journal_unlock_updates(journal); +} + +/* + * If we are mounting (or read-write remounting) a filesystem whose journal + * has recorded an error from a previous lifetime, move that error to the + * main filesystem now. + */ +static void ext3_clear_journal_err(struct super_block *sb, + struct ext3_super_block *es) +{ + journal_t *journal; + int j_errno; + const char *errstr; + + journal = EXT3_SB(sb)->s_journal; + + /* + * Now check for any error status which may have been recorded in the + * journal by a prior ext3_error() or ext3_abort() + */ + + j_errno = journal_errno(journal); + if (j_errno) { + char nbuf[16]; + + errstr = ext3_decode_error(sb, j_errno, nbuf); + ext3_warning(sb, __func__, "Filesystem error recorded " + "from previous mount: %s", errstr); + ext3_warning(sb, __func__, "Marking fs in need of " + "filesystem check."); + + EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS; + es->s_state |= cpu_to_le16(EXT3_ERROR_FS); + ext3_commit_super (sb, es, 1); + + journal_clear_err(journal); + } +} + +/* + * Force the running and committing transactions to commit, + * and wait on the commit. + */ +int ext3_force_commit(struct super_block *sb) +{ + journal_t *journal; + int ret; + + if (sb->s_flags & MS_RDONLY) + return 0; + + journal = EXT3_SB(sb)->s_journal; + ret = ext3_journal_force_commit(journal); + return ret; +} + +static int ext3_sync_fs(struct super_block *sb, int wait) +{ + tid_t target; + + trace_ext3_sync_fs(sb, wait); + /* + * Writeback quota in non-journalled quota case - journalled quota has + * no dirty dquots + */ + dquot_writeback_dquots(sb, -1); + if (journal_start_commit(EXT3_SB(sb)->s_journal, &target)) { + if (wait) + log_wait_commit(EXT3_SB(sb)->s_journal, target); + } + return 0; +} + +/* + * LVM calls this function before a (read-only) snapshot is created. This + * gives us a chance to flush the journal completely and mark the fs clean. + */ +static int ext3_freeze(struct super_block *sb) +{ + int error = 0; + journal_t *journal; + + if (!(sb->s_flags & MS_RDONLY)) { + journal = EXT3_SB(sb)->s_journal; + + /* Now we set up the journal barrier. */ + journal_lock_updates(journal); + + /* + * We don't want to clear needs_recovery flag when we failed + * to flush the journal. + */ + error = journal_flush(journal); + if (error < 0) + goto out; + + /* Journal blocked and flushed, clear needs_recovery flag. */ + EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); + error = ext3_commit_super(sb, EXT3_SB(sb)->s_es, 1); + if (error) + goto out; + } + return 0; + +out: + journal_unlock_updates(journal); + return error; +} + +/* + * Called by LVM after the snapshot is done. We need to reset the RECOVER + * flag here, even though the filesystem is not technically dirty yet. + */ +static int ext3_unfreeze(struct super_block *sb) +{ + if (!(sb->s_flags & MS_RDONLY)) { + /* Reser the needs_recovery flag before the fs is unlocked. */ + EXT3_SET_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); + ext3_commit_super(sb, EXT3_SB(sb)->s_es, 1); + journal_unlock_updates(EXT3_SB(sb)->s_journal); + } + return 0; +} + +static int ext3_remount (struct super_block * sb, int * flags, char * data) +{ + struct ext3_super_block * es; + struct ext3_sb_info *sbi = EXT3_SB(sb); + ext3_fsblk_t n_blocks_count = 0; + unsigned long old_sb_flags; + struct ext3_mount_options old_opts; + int enable_quota = 0; + int err; +#ifdef CONFIG_QUOTA + int i; +#endif + + sync_filesystem(sb); + + /* Store the original options */ + old_sb_flags = sb->s_flags; + old_opts.s_mount_opt = sbi->s_mount_opt; + old_opts.s_resuid = sbi->s_resuid; + old_opts.s_resgid = sbi->s_resgid; + old_opts.s_commit_interval = sbi->s_commit_interval; +#ifdef CONFIG_QUOTA + old_opts.s_jquota_fmt = sbi->s_jquota_fmt; + for (i = 0; i < EXT3_MAXQUOTAS; i++) + if (sbi->s_qf_names[i]) { + old_opts.s_qf_names[i] = kstrdup(sbi->s_qf_names[i], + GFP_KERNEL); + if (!old_opts.s_qf_names[i]) { + int j; + + for (j = 0; j < i; j++) + kfree(old_opts.s_qf_names[j]); + return -ENOMEM; + } + } else + old_opts.s_qf_names[i] = NULL; +#endif + + /* + * Allow the "check" option to be passed as a remount option. + */ + if (!parse_options(data, sb, NULL, NULL, &n_blocks_count, 1)) { + err = -EINVAL; + goto restore_opts; + } + + if (test_opt(sb, ABORT)) + ext3_abort(sb, __func__, "Abort forced by user"); + + sb->s_flags = (sb->s_flags & ~MS_POSIXACL) | + (test_opt(sb, POSIX_ACL) ? MS_POSIXACL : 0); + + es = sbi->s_es; + + ext3_init_journal_params(sb, sbi->s_journal); + + if ((*flags & MS_RDONLY) != (sb->s_flags & MS_RDONLY) || + n_blocks_count > le32_to_cpu(es->s_blocks_count)) { + if (test_opt(sb, ABORT)) { + err = -EROFS; + goto restore_opts; + } + + if (*flags & MS_RDONLY) { + err = dquot_suspend(sb, -1); + if (err < 0) + goto restore_opts; + + /* + * First of all, the unconditional stuff we have to do + * to disable replay of the journal when we next remount + */ + sb->s_flags |= MS_RDONLY; + + /* + * OK, test if we are remounting a valid rw partition + * readonly, and if so set the rdonly flag and then + * mark the partition as valid again. + */ + if (!(es->s_state & cpu_to_le16(EXT3_VALID_FS)) && + (sbi->s_mount_state & EXT3_VALID_FS)) + es->s_state = cpu_to_le16(sbi->s_mount_state); + + ext3_mark_recovery_complete(sb, es); + } else { + __le32 ret; + if ((ret = EXT3_HAS_RO_COMPAT_FEATURE(sb, + ~EXT3_FEATURE_RO_COMPAT_SUPP))) { + ext3_msg(sb, KERN_WARNING, + "warning: couldn't remount RDWR " + "because of unsupported optional " + "features (%x)", le32_to_cpu(ret)); + err = -EROFS; + goto restore_opts; + } + + /* + * If we have an unprocessed orphan list hanging + * around from a previously readonly bdev mount, + * require a full umount & mount for now. + */ + if (es->s_last_orphan) { + ext3_msg(sb, KERN_WARNING, "warning: couldn't " + "remount RDWR because of unprocessed " + "orphan inode list. Please " + "umount & mount instead."); + err = -EINVAL; + goto restore_opts; + } + + /* + * Mounting a RDONLY partition read-write, so reread + * and store the current valid flag. (It may have + * been changed by e2fsck since we originally mounted + * the partition.) + */ + ext3_clear_journal_err(sb, es); + sbi->s_mount_state = le16_to_cpu(es->s_state); + if ((err = ext3_group_extend(sb, es, n_blocks_count))) + goto restore_opts; + if (!ext3_setup_super (sb, es, 0)) + sb->s_flags &= ~MS_RDONLY; + enable_quota = 1; + } + } +#ifdef CONFIG_QUOTA + /* Release old quota file names */ + for (i = 0; i < EXT3_MAXQUOTAS; i++) + kfree(old_opts.s_qf_names[i]); +#endif + if (enable_quota) + dquot_resume(sb, -1); + return 0; +restore_opts: + sb->s_flags = old_sb_flags; + sbi->s_mount_opt = old_opts.s_mount_opt; + sbi->s_resuid = old_opts.s_resuid; + sbi->s_resgid = old_opts.s_resgid; + sbi->s_commit_interval = old_opts.s_commit_interval; +#ifdef CONFIG_QUOTA + sbi->s_jquota_fmt = old_opts.s_jquota_fmt; + for (i = 0; i < EXT3_MAXQUOTAS; i++) { + kfree(sbi->s_qf_names[i]); + sbi->s_qf_names[i] = old_opts.s_qf_names[i]; + } +#endif + return err; +} + +static int ext3_statfs (struct dentry * dentry, struct kstatfs * buf) +{ + struct super_block *sb = dentry->d_sb; + struct ext3_sb_info *sbi = EXT3_SB(sb); + struct ext3_super_block *es = sbi->s_es; + u64 fsid; + + if (test_opt(sb, MINIX_DF)) { + sbi->s_overhead_last = 0; + } else if (sbi->s_blocks_last != le32_to_cpu(es->s_blocks_count)) { + unsigned long ngroups = sbi->s_groups_count, i; + ext3_fsblk_t overhead = 0; + smp_rmb(); + + /* + * Compute the overhead (FS structures). This is constant + * for a given filesystem unless the number of block groups + * changes so we cache the previous value until it does. + */ + + /* + * All of the blocks before first_data_block are + * overhead + */ + overhead = le32_to_cpu(es->s_first_data_block); + + /* + * Add the overhead attributed to the superblock and + * block group descriptors. If the sparse superblocks + * feature is turned on, then not all groups have this. + */ + for (i = 0; i < ngroups; i++) { + overhead += ext3_bg_has_super(sb, i) + + ext3_bg_num_gdb(sb, i); + cond_resched(); + } + + /* + * Every block group has an inode bitmap, a block + * bitmap, and an inode table. + */ + overhead += ngroups * (2 + sbi->s_itb_per_group); + + /* Add the internal journal blocks as well */ + if (sbi->s_journal && !sbi->journal_bdev) + overhead += sbi->s_journal->j_maxlen; + + sbi->s_overhead_last = overhead; + smp_wmb(); + sbi->s_blocks_last = le32_to_cpu(es->s_blocks_count); + } + + buf->f_type = EXT3_SUPER_MAGIC; + buf->f_bsize = sb->s_blocksize; + buf->f_blocks = le32_to_cpu(es->s_blocks_count) - sbi->s_overhead_last; + buf->f_bfree = percpu_counter_sum_positive(&sbi->s_freeblocks_counter); + buf->f_bavail = buf->f_bfree - le32_to_cpu(es->s_r_blocks_count); + if (buf->f_bfree < le32_to_cpu(es->s_r_blocks_count)) + buf->f_bavail = 0; + buf->f_files = le32_to_cpu(es->s_inodes_count); + buf->f_ffree = percpu_counter_sum_positive(&sbi->s_freeinodes_counter); + buf->f_namelen = EXT3_NAME_LEN; + fsid = le64_to_cpup((void *)es->s_uuid) ^ + le64_to_cpup((void *)es->s_uuid + sizeof(u64)); + buf->f_fsid.val[0] = fsid & 0xFFFFFFFFUL; + buf->f_fsid.val[1] = (fsid >> 32) & 0xFFFFFFFFUL; + return 0; +} + +/* Helper function for writing quotas on sync - we need to start transaction before quota file + * is locked for write. Otherwise the are possible deadlocks: + * Process 1 Process 2 + * ext3_create() quota_sync() + * journal_start() write_dquot() + * dquot_initialize() down(dqio_mutex) + * down(dqio_mutex) journal_start() + * + */ + +#ifdef CONFIG_QUOTA + +static inline struct inode *dquot_to_inode(struct dquot *dquot) +{ + return sb_dqopt(dquot->dq_sb)->files[dquot->dq_id.type]; +} + +static int ext3_write_dquot(struct dquot *dquot) +{ + int ret, err; + handle_t *handle; + struct inode *inode; + + inode = dquot_to_inode(dquot); + handle = ext3_journal_start(inode, + EXT3_QUOTA_TRANS_BLOCKS(dquot->dq_sb)); + if (IS_ERR(handle)) + return PTR_ERR(handle); + ret = dquot_commit(dquot); + err = ext3_journal_stop(handle); + if (!ret) + ret = err; + return ret; +} + +static int ext3_acquire_dquot(struct dquot *dquot) +{ + int ret, err; + handle_t *handle; + + handle = ext3_journal_start(dquot_to_inode(dquot), + EXT3_QUOTA_INIT_BLOCKS(dquot->dq_sb)); + if (IS_ERR(handle)) + return PTR_ERR(handle); + ret = dquot_acquire(dquot); + err = ext3_journal_stop(handle); + if (!ret) + ret = err; + return ret; +} + +static int ext3_release_dquot(struct dquot *dquot) +{ + int ret, err; + handle_t *handle; + + handle = ext3_journal_start(dquot_to_inode(dquot), + EXT3_QUOTA_DEL_BLOCKS(dquot->dq_sb)); + if (IS_ERR(handle)) { + /* Release dquot anyway to avoid endless cycle in dqput() */ + dquot_release(dquot); + return PTR_ERR(handle); + } + ret = dquot_release(dquot); + err = ext3_journal_stop(handle); + if (!ret) + ret = err; + return ret; +} + +static int ext3_mark_dquot_dirty(struct dquot *dquot) +{ + /* Are we journaling quotas? */ + if (EXT3_SB(dquot->dq_sb)->s_qf_names[USRQUOTA] || + EXT3_SB(dquot->dq_sb)->s_qf_names[GRPQUOTA]) { + dquot_mark_dquot_dirty(dquot); + return ext3_write_dquot(dquot); + } else { + return dquot_mark_dquot_dirty(dquot); + } +} + +static int ext3_write_info(struct super_block *sb, int type) +{ + int ret, err; + handle_t *handle; + + /* Data block + inode block */ + handle = ext3_journal_start(d_inode(sb->s_root), 2); + if (IS_ERR(handle)) + return PTR_ERR(handle); + ret = dquot_commit_info(sb, type); + err = ext3_journal_stop(handle); + if (!ret) + ret = err; + return ret; +} + +/* + * Turn on quotas during mount time - we need to find + * the quota file and such... + */ +static int ext3_quota_on_mount(struct super_block *sb, int type) +{ + return dquot_quota_on_mount(sb, EXT3_SB(sb)->s_qf_names[type], + EXT3_SB(sb)->s_jquota_fmt, type); +} + +/* + * Standard function to be called on quota_on + */ +static int ext3_quota_on(struct super_block *sb, int type, int format_id, + struct path *path) +{ + int err; + + if (!test_opt(sb, QUOTA)) + return -EINVAL; + + /* Quotafile not on the same filesystem? */ + if (path->dentry->d_sb != sb) + return -EXDEV; + /* Journaling quota? */ + if (EXT3_SB(sb)->s_qf_names[type]) { + /* Quotafile not of fs root? */ + if (path->dentry->d_parent != sb->s_root) + ext3_msg(sb, KERN_WARNING, + "warning: Quota file not on filesystem root. " + "Journaled quota will not work."); + } + + /* + * When we journal data on quota file, we have to flush journal to see + * all updates to the file when we bypass pagecache... + */ + if (ext3_should_journal_data(d_inode(path->dentry))) { + /* + * We don't need to lock updates but journal_flush() could + * otherwise be livelocked... + */ + journal_lock_updates(EXT3_SB(sb)->s_journal); + err = journal_flush(EXT3_SB(sb)->s_journal); + journal_unlock_updates(EXT3_SB(sb)->s_journal); + if (err) + return err; + } + + return dquot_quota_on(sb, type, format_id, path); +} + +/* Read data from quotafile - avoid pagecache and such because we cannot afford + * acquiring the locks... As quota files are never truncated and quota code + * itself serializes the operations (and no one else should touch the files) + * we don't have to be afraid of races */ +static ssize_t ext3_quota_read(struct super_block *sb, int type, char *data, + size_t len, loff_t off) +{ + struct inode *inode = sb_dqopt(sb)->files[type]; + sector_t blk = off >> EXT3_BLOCK_SIZE_BITS(sb); + int err = 0; + int offset = off & (sb->s_blocksize - 1); + int tocopy; + size_t toread; + struct buffer_head *bh; + loff_t i_size = i_size_read(inode); + + if (off > i_size) + return 0; + if (off+len > i_size) + len = i_size-off; + toread = len; + while (toread > 0) { + tocopy = sb->s_blocksize - offset < toread ? + sb->s_blocksize - offset : toread; + bh = ext3_bread(NULL, inode, blk, 0, &err); + if (err) + return err; + if (!bh) /* A hole? */ + memset(data, 0, tocopy); + else + memcpy(data, bh->b_data+offset, tocopy); + brelse(bh); + offset = 0; + toread -= tocopy; + data += tocopy; + blk++; + } + return len; +} + +/* Write to quotafile (we know the transaction is already started and has + * enough credits) */ +static ssize_t ext3_quota_write(struct super_block *sb, int type, + const char *data, size_t len, loff_t off) +{ + struct inode *inode = sb_dqopt(sb)->files[type]; + sector_t blk = off >> EXT3_BLOCK_SIZE_BITS(sb); + int err = 0; + int offset = off & (sb->s_blocksize - 1); + int journal_quota = EXT3_SB(sb)->s_qf_names[type] != NULL; + struct buffer_head *bh; + handle_t *handle = journal_current_handle(); + + if (!handle) { + ext3_msg(sb, KERN_WARNING, + "warning: quota write (off=%llu, len=%llu)" + " cancelled because transaction is not started.", + (unsigned long long)off, (unsigned long long)len); + return -EIO; + } + + /* + * Since we account only one data block in transaction credits, + * then it is impossible to cross a block boundary. + */ + if (sb->s_blocksize - offset < len) { + ext3_msg(sb, KERN_WARNING, "Quota write (off=%llu, len=%llu)" + " cancelled because not block aligned", + (unsigned long long)off, (unsigned long long)len); + return -EIO; + } + bh = ext3_bread(handle, inode, blk, 1, &err); + if (!bh) + goto out; + if (journal_quota) { + err = ext3_journal_get_write_access(handle, bh); + if (err) { + brelse(bh); + goto out; + } + } + lock_buffer(bh); + memcpy(bh->b_data+offset, data, len); + flush_dcache_page(bh->b_page); + unlock_buffer(bh); + if (journal_quota) + err = ext3_journal_dirty_metadata(handle, bh); + else { + /* Always do at least ordered writes for quotas */ + err = ext3_journal_dirty_data(handle, bh); + mark_buffer_dirty(bh); + } + brelse(bh); +out: + if (err) + return err; + if (inode->i_size < off + len) { + i_size_write(inode, off + len); + EXT3_I(inode)->i_disksize = inode->i_size; + } + inode->i_version++; + inode->i_mtime = inode->i_ctime = CURRENT_TIME; + ext3_mark_inode_dirty(handle, inode); + return len; +} + +#endif + +static struct dentry *ext3_mount(struct file_system_type *fs_type, + int flags, const char *dev_name, void *data) +{ + return mount_bdev(fs_type, flags, dev_name, data, ext3_fill_super); +} + +static struct file_system_type ext3_fs_type = { + .owner = THIS_MODULE, + .name = "ext3", + .mount = ext3_mount, + .kill_sb = kill_block_super, + .fs_flags = FS_REQUIRES_DEV, +}; +MODULE_ALIAS_FS("ext3"); + +static int __init init_ext3_fs(void) +{ + int err = init_ext3_xattr(); + if (err) + return err; + err = init_inodecache(); + if (err) + goto out1; + err = register_filesystem(&ext3_fs_type); + if (err) + goto out; + return 0; +out: + destroy_inodecache(); +out1: + exit_ext3_xattr(); + return err; +} + +static void __exit exit_ext3_fs(void) +{ + unregister_filesystem(&ext3_fs_type); + destroy_inodecache(); + exit_ext3_xattr(); +} + +MODULE_AUTHOR("Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others"); +MODULE_DESCRIPTION("Second Extended Filesystem with journaling extensions"); +MODULE_LICENSE("GPL"); +module_init(init_ext3_fs) +module_exit(exit_ext3_fs) |