diff options
Diffstat (limited to 'kernel/drivers/watchdog/Kconfig')
| -rw-r--r-- | kernel/drivers/watchdog/Kconfig | 84 |
1 files changed, 79 insertions, 5 deletions
diff --git a/kernel/drivers/watchdog/Kconfig b/kernel/drivers/watchdog/Kconfig index e5e7c5505..1c427beff 100644 --- a/kernel/drivers/watchdog/Kconfig +++ b/kernel/drivers/watchdog/Kconfig @@ -1,3 +1,4 @@ + # # Watchdog device configuration # @@ -96,6 +97,15 @@ config DA9063_WATCHDOG This driver can be built as a module. The module name is da9063_wdt. +config DA9062_WATCHDOG + tristate "Dialog DA9062 Watchdog" + depends on MFD_DA9062 + select WATCHDOG_CORE + help + Support for the watchdog in the DA9062 PMIC. + + This driver can be built as a module. The module name is da9062_wdt. + config GPIO_WATCHDOG tristate "Watchdog device controlled through GPIO-line" depends on OF_GPIO @@ -104,6 +114,17 @@ config GPIO_WATCHDOG If you say yes here you get support for watchdog device controlled through GPIO-line. +config GPIO_WATCHDOG_ARCH_INITCALL + bool "Register the watchdog as early as possible" + depends on GPIO_WATCHDOG=y + help + In some situations, the default initcall level (module_init) + in not early enough in the boot process to avoid the watchdog + to be triggered. + If you say yes here, the initcall level would be raised to + arch_initcall. + If in doubt, say N. + config MENF21BMC_WATCHDOG tristate "MEN 14F021P00 BMC Watchdog" depends on MFD_MENF21BMC @@ -167,8 +188,18 @@ config AT91SAM9X_WATCHDOG Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will reboot your system when the timeout is reached. +config SAMA5D4_WATCHDOG + tristate "Atmel SAMA5D4 Watchdog Timer" + depends on ARCH_AT91 + select WATCHDOG_CORE + help + Atmel SAMA5D4 watchdog timer is embedded into SAMA5D4 chips. + Its Watchdog Timer Mode Register can be written more than once. + This will reboot your system when the timeout is reached. + config CADENCE_WATCHDOG tristate "Cadence Watchdog Timer" + depends on HAS_IOMEM select WATCHDOG_CORE help Say Y here if you want to include support for the watchdog @@ -408,14 +439,14 @@ config TS72XX_WATCHDOG config MAX63XX_WATCHDOG tristate "Max63xx watchdog" - depends on ARM && HAS_IOMEM + depends on HAS_IOMEM select WATCHDOG_CORE help Support for memory mapped max63{69,70,71,72,73,74} watchdog timer. config IMX2_WDT tristate "IMX2+ Watchdog" - depends on ARCH_MXC + depends on ARCH_MXC || ARCH_LAYERSCAPE select REGMAP_MMIO select WATCHDOG_CORE help @@ -470,6 +501,18 @@ config SIRFSOC_WATCHDOG Support for CSR SiRFprimaII and SiRFatlasVI watchdog. When the watchdog triggers the system will be reset. +config ST_LPC_WATCHDOG + tristate "STMicroelectronics LPC Watchdog" + depends on ARCH_STI + depends on OF + select WATCHDOG_CORE + help + Say Y here to include STMicroelectronics Low Power Controller + (LPC) based Watchdog timer support. + + To compile this driver as a module, choose M here: the + module will be called st_lpc_wdt. + config TEGRA_WATCHDOG tristate "Tegra watchdog" depends on (ARCH_TEGRA || COMPILE_TEST) && HAS_IOMEM @@ -514,6 +557,27 @@ config MEDIATEK_WATCHDOG To compile this driver as a module, choose M here: the module will be called mtk_wdt. +config DIGICOLOR_WATCHDOG + tristate "Conexant Digicolor SoCs watchdog support" + depends on ARCH_DIGICOLOR + select WATCHDOG_CORE + help + Say Y here to include support for the watchdog timer + in Conexant Digicolor SoCs. + To compile this driver as a module, choose M here: the + module will be called digicolor_wdt. + +config LPC18XX_WATCHDOG + tristate "LPC18xx/43xx Watchdog" + depends on ARCH_LPC18XX || COMPILE_TEST + select WATCHDOG_CORE + help + Say Y here if to include support for the watchdog timer + in NXP LPC SoCs family, which includes LPC18xx/LPC43xx + processors. + To compile this driver as a module, choose M here: the + module will be called lpc18xx_wdt. + # AVR32 Architecture config AT32AP700X_WDT @@ -753,7 +817,9 @@ config ITCO_WDT tristate "Intel TCO Timer/Watchdog" depends on (X86 || IA64) && PCI select WATCHDOG_CORE - select LPC_ICH + depends on I2C || I2C=n + select LPC_ICH if !EXPERT + select I2C_I801 if !EXPERT && I2C ---help--- Hardware driver for the intel TCO timer based watchdog devices. These drivers are included in the Intel 82801 I/O Controller @@ -1247,6 +1313,14 @@ config BCM_KONA_WDT_DEBUG If in doubt, say 'N'. +config BCM7038_WDT + tristate "BCM7038 Watchdog" + select WATCHDOG_CORE + help + Watchdog driver for the built-in hardware in Broadcom 7038 SoCs. + + Say 'Y or 'M' here to enable the driver. + config IMGPDC_WDT tristate "Imagination Technologies PDC Watchdog Timer" depends on HAS_IOMEM @@ -1289,7 +1363,7 @@ config MPC5200_WDT config 8xxx_WDT tristate "MPC8xxx Platform Watchdog Timer" - depends on PPC_8xx || PPC_83xx || PPC_86xx + depends on PPC_8xx || PPC_83xx || PPC_86xx || PPC_MPC512x select WATCHDOG_CORE help This driver is for a SoC level watchdog that exists on some @@ -1343,7 +1417,7 @@ config BOOKE_WDT_DEFAULT_TIMEOUT config MEN_A21_WDT tristate "MEN A21 VME CPU Carrier Board Watchdog Timer" select WATCHDOG_CORE - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST help Watchdog driver for MEN A21 VMEbus CPU Carrier Boards. |