diff options
Diffstat (limited to 'kernel/drivers/video/backlight/ili9320.c')
| -rw-r--r-- | kernel/drivers/video/backlight/ili9320.c | 303 |
1 files changed, 303 insertions, 0 deletions
diff --git a/kernel/drivers/video/backlight/ili9320.c b/kernel/drivers/video/backlight/ili9320.c new file mode 100644 index 000000000..2cf39e6d5 --- /dev/null +++ b/kernel/drivers/video/backlight/ili9320.c @@ -0,0 +1,303 @@ +/* drivers/video/backlight/ili9320.c + * + * ILI9320 LCD controller driver core. + * + * Copyright 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/fb.h> +#include <linux/init.h> +#include <linux/lcd.h> +#include <linux/module.h> +#include <linux/slab.h> + +#include <linux/spi/spi.h> + +#include <video/ili9320.h> + +#include "ili9320.h" + + +static inline int ili9320_write_spi(struct ili9320 *ili, + unsigned int reg, + unsigned int value) +{ + struct ili9320_spi *spi = &ili->access.spi; + unsigned char *addr = spi->buffer_addr; + unsigned char *data = spi->buffer_data; + + /* spi message consits of: + * first byte: ID and operation + */ + + addr[0] = spi->id | ILI9320_SPI_INDEX | ILI9320_SPI_WRITE; + addr[1] = reg >> 8; + addr[2] = reg; + + /* second message is the data to transfer */ + + data[0] = spi->id | ILI9320_SPI_DATA | ILI9320_SPI_WRITE; + data[1] = value >> 8; + data[2] = value; + + return spi_sync(spi->dev, &spi->message); +} + +int ili9320_write(struct ili9320 *ili, unsigned int reg, unsigned int value) +{ + dev_dbg(ili->dev, "write: reg=%02x, val=%04x\n", reg, value); + return ili->write(ili, reg, value); +} +EXPORT_SYMBOL_GPL(ili9320_write); + +int ili9320_write_regs(struct ili9320 *ili, + const struct ili9320_reg *values, + int nr_values) +{ + int index; + int ret; + + for (index = 0; index < nr_values; index++, values++) { + ret = ili9320_write(ili, values->address, values->value); + if (ret != 0) + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(ili9320_write_regs); + +static void ili9320_reset(struct ili9320 *lcd) +{ + struct ili9320_platdata *cfg = lcd->platdata; + + cfg->reset(1); + mdelay(50); + + cfg->reset(0); + mdelay(50); + + cfg->reset(1); + mdelay(100); +} + +static inline int ili9320_init_chip(struct ili9320 *lcd) +{ + int ret; + + ili9320_reset(lcd); + + ret = lcd->client->init(lcd, lcd->platdata); + if (ret != 0) { + dev_err(lcd->dev, "failed to initialise display\n"); + return ret; + } + + lcd->initialised = 1; + return 0; +} + +static inline int ili9320_power_on(struct ili9320 *lcd) +{ + if (!lcd->initialised) + ili9320_init_chip(lcd); + + lcd->display1 |= (ILI9320_DISPLAY1_D(3) | ILI9320_DISPLAY1_BASEE); + ili9320_write(lcd, ILI9320_DISPLAY1, lcd->display1); + + return 0; +} + +static inline int ili9320_power_off(struct ili9320 *lcd) +{ + lcd->display1 &= ~(ILI9320_DISPLAY1_D(3) | ILI9320_DISPLAY1_BASEE); + ili9320_write(lcd, ILI9320_DISPLAY1, lcd->display1); + + return 0; +} + +#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) + +static int ili9320_power(struct ili9320 *lcd, int power) +{ + int ret = 0; + + dev_dbg(lcd->dev, "power %d => %d\n", lcd->power, power); + + if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power)) + ret = ili9320_power_on(lcd); + else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power)) + ret = ili9320_power_off(lcd); + + if (ret == 0) + lcd->power = power; + else + dev_warn(lcd->dev, "failed to set power mode %d\n", power); + + return ret; +} + +static inline struct ili9320 *to_our_lcd(struct lcd_device *lcd) +{ + return lcd_get_data(lcd); +} + +static int ili9320_set_power(struct lcd_device *ld, int power) +{ + struct ili9320 *lcd = to_our_lcd(ld); + + return ili9320_power(lcd, power); +} + +static int ili9320_get_power(struct lcd_device *ld) +{ + struct ili9320 *lcd = to_our_lcd(ld); + + return lcd->power; +} + +static struct lcd_ops ili9320_ops = { + .get_power = ili9320_get_power, + .set_power = ili9320_set_power, +}; + +static void ili9320_setup_spi(struct ili9320 *ili, + struct spi_device *dev) +{ + struct ili9320_spi *spi = &ili->access.spi; + + ili->write = ili9320_write_spi; + spi->dev = dev; + + /* fill the two messages we are going to use to send the data + * with, the first the address followed by the data. The datasheet + * says they should be done as two distinct cycles of the SPI CS line. + */ + + spi->xfer[0].tx_buf = spi->buffer_addr; + spi->xfer[1].tx_buf = spi->buffer_data; + spi->xfer[0].len = 3; + spi->xfer[1].len = 3; + spi->xfer[0].bits_per_word = 8; + spi->xfer[1].bits_per_word = 8; + spi->xfer[0].cs_change = 1; + + spi_message_init(&spi->message); + spi_message_add_tail(&spi->xfer[0], &spi->message); + spi_message_add_tail(&spi->xfer[1], &spi->message); +} + +int ili9320_probe_spi(struct spi_device *spi, + struct ili9320_client *client) +{ + struct ili9320_platdata *cfg = dev_get_platdata(&spi->dev); + struct device *dev = &spi->dev; + struct ili9320 *ili; + struct lcd_device *lcd; + int ret = 0; + + /* verify we where given some information */ + + if (cfg == NULL) { + dev_err(dev, "no platform data supplied\n"); + return -EINVAL; + } + + if (cfg->hsize <= 0 || cfg->vsize <= 0 || cfg->reset == NULL) { + dev_err(dev, "invalid platform data supplied\n"); + return -EINVAL; + } + + /* allocate and initialse our state */ + + ili = devm_kzalloc(&spi->dev, sizeof(struct ili9320), GFP_KERNEL); + if (ili == NULL) + return -ENOMEM; + + ili->access.spi.id = ILI9320_SPI_IDCODE | ILI9320_SPI_ID(1); + + ili->dev = dev; + ili->client = client; + ili->power = FB_BLANK_POWERDOWN; + ili->platdata = cfg; + + spi_set_drvdata(spi, ili); + + ili9320_setup_spi(ili, spi); + + lcd = devm_lcd_device_register(&spi->dev, "ili9320", dev, ili, + &ili9320_ops); + if (IS_ERR(lcd)) { + dev_err(dev, "failed to register lcd device\n"); + return PTR_ERR(lcd); + } + + ili->lcd = lcd; + + dev_info(dev, "initialising %s\n", client->name); + + ret = ili9320_power(ili, FB_BLANK_UNBLANK); + if (ret != 0) { + dev_err(dev, "failed to set lcd power state\n"); + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(ili9320_probe_spi); + +int ili9320_remove(struct ili9320 *ili) +{ + ili9320_power(ili, FB_BLANK_POWERDOWN); + return 0; +} +EXPORT_SYMBOL_GPL(ili9320_remove); + +#ifdef CONFIG_PM_SLEEP +int ili9320_suspend(struct ili9320 *lcd) +{ + int ret; + + ret = ili9320_power(lcd, FB_BLANK_POWERDOWN); + + if (lcd->platdata->suspend == ILI9320_SUSPEND_DEEP) { + ili9320_write(lcd, ILI9320_POWER1, lcd->power1 | + ILI9320_POWER1_SLP | + ILI9320_POWER1_DSTB); + lcd->initialised = 0; + } + + return ret; +} +EXPORT_SYMBOL_GPL(ili9320_suspend); + +int ili9320_resume(struct ili9320 *lcd) +{ + dev_info(lcd->dev, "resuming from power state %d\n", lcd->power); + + if (lcd->platdata->suspend == ILI9320_SUSPEND_DEEP) + ili9320_write(lcd, ILI9320_POWER1, 0x00); + + return ili9320_power(lcd, FB_BLANK_UNBLANK); +} +EXPORT_SYMBOL_GPL(ili9320_resume); +#endif + +/* Power down all displays on reboot, poweroff or halt */ +void ili9320_shutdown(struct ili9320 *lcd) +{ + ili9320_power(lcd, FB_BLANK_POWERDOWN); +} +EXPORT_SYMBOL_GPL(ili9320_shutdown); + +MODULE_AUTHOR("Ben Dooks <ben-linux@fluff.org>"); +MODULE_DESCRIPTION("ILI9320 LCD Driver"); +MODULE_LICENSE("GPL v2"); |