diff options
Diffstat (limited to 'kernel/drivers/target/target_core_spc.c')
| -rw-r--r-- | kernel/drivers/target/target_core_spc.c | 201 |
1 files changed, 93 insertions, 108 deletions
diff --git a/kernel/drivers/target/target_core_spc.c b/kernel/drivers/target/target_core_spc.c index 7912aa124..9413e1a94 100644 --- a/kernel/drivers/target/target_core_spc.c +++ b/kernel/drivers/target/target_core_spc.c @@ -24,7 +24,8 @@ #include <linux/module.h> #include <asm/unaligned.h> -#include <scsi/scsi.h> +#include <scsi/scsi_proto.h> +#include <scsi/scsi_common.h> #include <scsi/scsi_tcq.h> #include <target/target_core_base.h> @@ -37,10 +38,9 @@ #include "target_core_ua.h" #include "target_core_xcopy.h" -static void spc_fill_alua_data(struct se_port *port, unsigned char *buf) +static void spc_fill_alua_data(struct se_lun *lun, unsigned char *buf) { struct t10_alua_tg_pt_gp *tg_pt_gp; - struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem; /* * Set SCCS for MAINTENANCE_IN + REPORT_TARGET_PORT_GROUPS. @@ -53,17 +53,11 @@ static void spc_fill_alua_data(struct se_port *port, unsigned char *buf) * * See spc4r17 section 6.4.2 Table 135 */ - if (!port) - return; - tg_pt_gp_mem = port->sep_alua_tg_pt_gp_mem; - if (!tg_pt_gp_mem) - return; - - spin_lock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); - tg_pt_gp = tg_pt_gp_mem->tg_pt_gp; + spin_lock(&lun->lun_tg_pt_gp_lock); + tg_pt_gp = lun->lun_tg_pt_gp; if (tg_pt_gp) buf[5] |= tg_pt_gp->tg_pt_gp_alua_access_type; - spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + spin_unlock(&lun->lun_tg_pt_gp_lock); } sense_reason_t @@ -94,7 +88,7 @@ spc_emulate_inquiry_std(struct se_cmd *cmd, unsigned char *buf) /* * Enable SCCS and TPGS fields for Emulated ALUA */ - spc_fill_alua_data(lun->lun_sep, buf); + spc_fill_alua_data(lun, buf); /* * Set Third-Party Copy (3PC) bit to indicate support for EXTENDED_COPY @@ -181,11 +175,9 @@ spc_emulate_evpd_83(struct se_cmd *cmd, unsigned char *buf) { struct se_device *dev = cmd->se_dev; struct se_lun *lun = cmd->se_lun; - struct se_port *port = NULL; struct se_portal_group *tpg = NULL; struct t10_alua_lu_gp_member *lu_gp_mem; struct t10_alua_tg_pt_gp *tg_pt_gp; - struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem; unsigned char *prod = &dev->t10_wwn.model[0]; u32 prod_len; u32 unit_serial_len, off = 0; @@ -267,18 +259,15 @@ check_t10_vend_desc: /* Header size for Designation descriptor */ len += (id_len + 4); off += (id_len + 4); - /* - * struct se_port is only set for INQUIRY VPD=1 through $FABRIC_MOD - */ - port = lun->lun_sep; - if (port) { + + if (1) { struct t10_alua_lu_gp *lu_gp; u32 padding, scsi_name_len, scsi_target_len; u16 lu_gp_id = 0; u16 tg_pt_gp_id = 0; u16 tpgt; - tpg = port->sep_tpg; + tpg = lun->lun_tpg; /* * Relative target port identifer, see spc4r17 * section 7.7.3.7 @@ -286,8 +275,7 @@ check_t10_vend_desc: * Get the PROTOCOL IDENTIFIER as defined by spc4r17 * section 7.5.1 Table 362 */ - buf[off] = - (tpg->se_tpg_tfo->get_fabric_proto_ident(tpg) << 4); + buf[off] = tpg->proto_id << 4; buf[off++] |= 0x1; /* CODE SET == Binary */ buf[off] = 0x80; /* Set PIV=1 */ /* Set ASSOCIATION == target port: 01b */ @@ -299,8 +287,8 @@ check_t10_vend_desc: /* Skip over Obsolete field in RTPI payload * in Table 472 */ off += 2; - buf[off++] = ((port->sep_rtpi >> 8) & 0xff); - buf[off++] = (port->sep_rtpi & 0xff); + buf[off++] = ((lun->lun_rtpi >> 8) & 0xff); + buf[off++] = (lun->lun_rtpi & 0xff); len += 8; /* Header size + Designation descriptor */ /* * Target port group identifier, see spc4r17 @@ -309,21 +297,16 @@ check_t10_vend_desc: * Get the PROTOCOL IDENTIFIER as defined by spc4r17 * section 7.5.1 Table 362 */ - tg_pt_gp_mem = port->sep_alua_tg_pt_gp_mem; - if (!tg_pt_gp_mem) - goto check_lu_gp; - - spin_lock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); - tg_pt_gp = tg_pt_gp_mem->tg_pt_gp; + spin_lock(&lun->lun_tg_pt_gp_lock); + tg_pt_gp = lun->lun_tg_pt_gp; if (!tg_pt_gp) { - spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + spin_unlock(&lun->lun_tg_pt_gp_lock); goto check_lu_gp; } tg_pt_gp_id = tg_pt_gp->tg_pt_gp_id; - spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + spin_unlock(&lun->lun_tg_pt_gp_lock); - buf[off] = - (tpg->se_tpg_tfo->get_fabric_proto_ident(tpg) << 4); + buf[off] = tpg->proto_id << 4; buf[off++] |= 0x1; /* CODE SET == Binary */ buf[off] = 0x80; /* Set PIV=1 */ /* Set ASSOCIATION == target port: 01b */ @@ -371,8 +354,7 @@ check_lu_gp: * section 7.5.1 Table 362 */ check_scsi_name: - buf[off] = - (tpg->se_tpg_tfo->get_fabric_proto_ident(tpg) << 4); + buf[off] = tpg->proto_id << 4; buf[off++] |= 0x3; /* CODE SET == UTF-8 */ buf[off] = 0x80; /* Set PIV=1 */ /* Set ASSOCIATION == target port: 01b */ @@ -412,8 +394,7 @@ check_scsi_name: /* * Target device designator */ - buf[off] = - (tpg->se_tpg_tfo->get_fabric_proto_ident(tpg) << 4); + buf[off] = tpg->proto_id << 4; buf[off++] |= 0x3; /* CODE SET == UTF-8 */ buf[off] = 0x80; /* Set PIV=1 */ /* Set ASSOCIATION == target device: 10b */ @@ -473,15 +454,22 @@ spc_emulate_evpd_86(struct se_cmd *cmd, unsigned char *buf) cmd->se_sess->sess_prot_type == TARGET_DIF_TYPE1_PROT) buf[4] = 0x5; else if (dev->dev_attrib.pi_prot_type == TARGET_DIF_TYPE3_PROT || - cmd->se_sess->sess_prot_type == TARGET_DIF_TYPE3_PROT) + cmd->se_sess->sess_prot_type == TARGET_DIF_TYPE3_PROT) buf[4] = 0x4; } + /* logical unit supports type 1 and type 3 protection */ + if ((dev->transport->get_device_type(dev) == TYPE_DISK) && + (sess->sup_prot_ops & (TARGET_PROT_DIN_PASS | TARGET_PROT_DOUT_PASS)) && + (dev->dev_attrib.pi_prot_type || cmd->se_sess->sess_prot_type)) { + buf[4] |= (0x3 << 3); + } + /* Set HEADSUP, ORDSUP, SIMPSUP */ buf[5] = 0x07; /* If WriteCache emulation is enabled, set V_SUP */ - if (se_dev_check_wce(dev)) + if (target_check_wce(dev)) buf[6] = 0x01; /* If an LBA map is present set R_SUP */ spin_lock(&cmd->se_dev->t10_alua.lba_map_lock); @@ -496,8 +484,8 @@ static sense_reason_t spc_emulate_evpd_b0(struct se_cmd *cmd, unsigned char *buf) { struct se_device *dev = cmd->se_dev; - int have_tp = 0; - int opt, min; + u32 mtl = 0; + int have_tp = 0, opt, min; /* * Following spc3r22 section 6.5.3 Block Limits VPD page, when @@ -528,8 +516,15 @@ spc_emulate_evpd_b0(struct se_cmd *cmd, unsigned char *buf) /* * Set MAXIMUM TRANSFER LENGTH + * + * XXX: Currently assumes single PAGE_SIZE per scatterlist for fabrics + * enforcing maximum HW scatter-gather-list entry limit */ - put_unaligned_be32(dev->dev_attrib.hw_max_sectors, &buf[8]); + if (cmd->se_tfo->max_data_sg_nents) { + mtl = (cmd->se_tfo->max_data_sg_nents * PAGE_SIZE) / + dev->dev_attrib.block_size; + } + put_unaligned_be32(min_not_zero(mtl, dev->dev_attrib.hw_max_sectors), &buf[8]); /* * Set OPTIMAL TRANSFER LENGTH @@ -698,7 +693,7 @@ static sense_reason_t spc_emulate_inquiry(struct se_cmd *cmd) { struct se_device *dev = cmd->se_dev; - struct se_portal_group *tpg = cmd->se_lun->lun_sep->sep_tpg; + struct se_portal_group *tpg = cmd->se_lun->lun_tpg; unsigned char *rbuf; unsigned char *cdb = cmd->t_task_cdb; unsigned char *buf; @@ -712,7 +707,7 @@ spc_emulate_inquiry(struct se_cmd *cmd) return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; } - if (dev == tpg->tpg_virt_lun0.lun_se_dev) + if (dev == rcu_access_pointer(tpg->tpg_virt_lun0->lun_se_dev)) buf[0] = 0x3f; /* Not connected */ else buf[0] = dev->transport->get_device_type(dev); @@ -780,7 +775,12 @@ static int spc_modesense_control(struct se_cmd *cmd, u8 pc, u8 *p) if (pc == 1) goto out; - p[2] = 2; + /* GLTSD: No implicit save of log parameters */ + p[2] = (1 << 1); + if (target_sense_desc_format(dev)) + /* D_SENSE: Descriptor format sense data for 64bit sectors */ + p[2] |= (1 << 2); + /* * From spc4r23, 7.4.7 Control mode page * @@ -888,7 +888,7 @@ static int spc_modesense_caching(struct se_cmd *cmd, u8 pc, u8 *p) if (pc == 1) goto out; - if (se_dev_check_wce(dev)) + if (target_check_wce(dev)) p[2] = 0x04; /* Write Cache Enable */ p[12] = 0x20; /* Disabled Read Ahead */ @@ -985,6 +985,7 @@ static sense_reason_t spc_emulate_modesense(struct se_cmd *cmd) int length = 0; int ret; int i; + bool read_only = target_lun_is_rdonly(cmd);; memset(buf, 0, SE_MODE_PAGE_BUF); @@ -995,13 +996,15 @@ static sense_reason_t spc_emulate_modesense(struct se_cmd *cmd) length = ten ? 3 : 2; /* DEVICE-SPECIFIC PARAMETER */ - if ((cmd->se_lun->lun_access & TRANSPORT_LUNFLAGS_READ_ONLY) || - (cmd->se_deve && - (cmd->se_deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY))) + if ((cmd->se_lun->lun_access & TRANSPORT_LUNFLAGS_READ_ONLY) || read_only) spc_modesense_write_protect(&buf[length], type); - if ((se_dev_check_wce(dev)) && - (dev->dev_attrib.emulate_fua_write > 0)) + /* + * SBC only allows us to enable FUA and DPO together. Fortunately + * DPO is explicitly specified as a hint, so a noop is a perfectly + * valid implementation. + */ + if (target_check_fua(dev)) spc_modesense_dpofua(&buf[length], type); ++length; @@ -1160,6 +1163,7 @@ static sense_reason_t spc_emulate_request_sense(struct se_cmd *cmd) unsigned char *rbuf; u8 ua_asc = 0, ua_ascq = 0; unsigned char buf[SE_SENSE_BUF]; + bool desc_format = target_sense_desc_format(cmd->se_dev); memset(buf, 0, SE_SENSE_BUF); @@ -1173,32 +1177,11 @@ static sense_reason_t spc_emulate_request_sense(struct se_cmd *cmd) if (!rbuf) return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; - if (!core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq)) { - /* - * CURRENT ERROR, UNIT ATTENTION - */ - buf[0] = 0x70; - buf[SPC_SENSE_KEY_OFFSET] = UNIT_ATTENTION; - - /* - * The Additional Sense Code (ASC) from the UNIT ATTENTION - */ - buf[SPC_ASC_KEY_OFFSET] = ua_asc; - buf[SPC_ASCQ_KEY_OFFSET] = ua_ascq; - buf[7] = 0x0A; - } else { - /* - * CURRENT ERROR, NO SENSE - */ - buf[0] = 0x70; - buf[SPC_SENSE_KEY_OFFSET] = NO_SENSE; - - /* - * NO ADDITIONAL SENSE INFORMATION - */ - buf[SPC_ASC_KEY_OFFSET] = 0x00; - buf[7] = 0x0A; - } + if (!core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq)) + scsi_build_sense_buffer(desc_format, buf, UNIT_ATTENTION, + ua_asc, ua_ascq); + else + scsi_build_sense_buffer(desc_format, buf, NO_SENSE, 0x0, 0x0); memcpy(rbuf, buf, min_t(u32, sizeof(buf), cmd->data_length)); transport_kunmap_data_sg(cmd); @@ -1211,17 +1194,14 @@ sense_reason_t spc_emulate_report_luns(struct se_cmd *cmd) { struct se_dev_entry *deve; struct se_session *sess = cmd->se_sess; + struct se_node_acl *nacl; + struct scsi_lun slun; unsigned char *buf; - u32 lun_count = 0, offset = 8, i; - - if (cmd->data_length < 16) { - pr_warn("REPORT LUNS allocation length %u too small\n", - cmd->data_length); - return TCM_INVALID_CDB_FIELD; - } + u32 lun_count = 0, offset = 8; + __be32 len; buf = transport_kmap_data_sg(cmd); - if (!buf) + if (cmd->data_length && !buf) return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; /* @@ -1229,41 +1209,49 @@ sense_reason_t spc_emulate_report_luns(struct se_cmd *cmd) * coming via a target_core_mod PASSTHROUGH op, and not through * a $FABRIC_MOD. In that case, report LUN=0 only. */ - if (!sess) { - int_to_scsilun(0, (struct scsi_lun *)&buf[offset]); - lun_count = 1; + if (!sess) goto done; - } - spin_lock_irq(&sess->se_node_acl->device_list_lock); - for (i = 0; i < TRANSPORT_MAX_LUNS_PER_TPG; i++) { - deve = sess->se_node_acl->device_list[i]; - if (!(deve->lun_flags & TRANSPORT_LUNFLAGS_INITIATOR_ACCESS)) - continue; + nacl = sess->se_node_acl; + + rcu_read_lock(); + hlist_for_each_entry_rcu(deve, &nacl->lun_entry_hlist, link) { /* * We determine the correct LUN LIST LENGTH even once we * have reached the initial allocation length. * See SPC2-R20 7.19. */ lun_count++; - if ((offset + 8) > cmd->data_length) + if (offset >= cmd->data_length) continue; - int_to_scsilun(deve->mapped_lun, (struct scsi_lun *)&buf[offset]); + int_to_scsilun(deve->mapped_lun, &slun); + memcpy(buf + offset, &slun, + min(8u, cmd->data_length - offset)); offset += 8; } - spin_unlock_irq(&sess->se_node_acl->device_list_lock); + rcu_read_unlock(); /* * See SPC3 r07, page 159. */ done: - lun_count *= 8; - buf[0] = ((lun_count >> 24) & 0xff); - buf[1] = ((lun_count >> 16) & 0xff); - buf[2] = ((lun_count >> 8) & 0xff); - buf[3] = (lun_count & 0xff); - transport_kunmap_data_sg(cmd); + /* + * If no LUNs are accessible, report virtual LUN 0. + */ + if (lun_count == 0) { + int_to_scsilun(0, &slun); + if (cmd->data_length > 8) + memcpy(buf + offset, &slun, + min(8u, cmd->data_length - offset)); + lun_count = 1; + } + + if (buf) { + len = cpu_to_be32(lun_count * 8); + memcpy(buf, &len, min_t(int, sizeof len, cmd->data_length)); + transport_kunmap_data_sg(cmd); + } target_complete_cmd_with_length(cmd, GOOD, 8 + lun_count * 8); return 0; @@ -1422,9 +1410,6 @@ spc_parse_cdb(struct se_cmd *cmd, unsigned int *size) } break; default: - pr_warn("TARGET_CORE[%s]: Unsupported SCSI Opcode" - " 0x%02x, sending CHECK_CONDITION.\n", - cmd->se_tfo->get_fabric_name(), cdb[0]); return TCM_UNSUPPORTED_SCSI_OPCODE; } |