diff options
Diffstat (limited to 'kernel/drivers/staging/comedi/drivers/ni_at_ao.c')
| -rw-r--r-- | kernel/drivers/staging/comedi/drivers/ni_at_ao.c | 383 |
1 files changed, 383 insertions, 0 deletions
diff --git a/kernel/drivers/staging/comedi/drivers/ni_at_ao.c b/kernel/drivers/staging/comedi/drivers/ni_at_ao.c new file mode 100644 index 000000000..f27aa0e82 --- /dev/null +++ b/kernel/drivers/staging/comedi/drivers/ni_at_ao.c @@ -0,0 +1,383 @@ +/* + * ni_at_ao.c + * Driver for NI AT-AO-6/10 boards + * + * COMEDI - Linux Control and Measurement Device Interface + * Copyright (C) 2000,2002 David A. Schleef <ds@schleef.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * Driver: ni_at_ao + * Description: National Instruments AT-AO-6/10 + * Devices: [National Instruments] AT-AO-6 (at-ao-6), AT-AO-10 (at-ao-10) + * Status: should work + * Author: David A. Schleef <ds@schleef.org> + * Updated: Sun Dec 26 12:26:28 EST 2004 + * + * Configuration options: + * [0] - I/O port base address + * [1] - IRQ (unused) + * [2] - DMA (unused) + * [3] - analog output range, set by jumpers on hardware + * 0 for -10 to 10V bipolar + * 1 for 0V to 10V unipolar + */ + +#include <linux/module.h> + +#include "../comedidev.h" + +#include "comedi_8254.h" + +/* + * Register map + * + * Register-level programming information can be found in NI + * document 320379.pdf. + */ +#define ATAO_DIO_REG 0x00 +#define ATAO_CFG2_REG 0x02 +#define ATAO_CFG2_CALLD_NOP (0 << 14) +#define ATAO_CFG2_CALLD(x) ((((x) >> 3) + 1) << 14) +#define ATAO_CFG2_FFRTEN (1 << 13) +#define ATAO_CFG2_DACS(x) (1 << (((x) / 2) + 8)) +#define ATAO_CFG2_LDAC(x) (1 << (((x) / 2) + 3)) +#define ATAO_CFG2_PROMEN (1 << 2) +#define ATAO_CFG2_SCLK (1 << 1) +#define ATAO_CFG2_SDATA (1 << 0) +#define ATAO_CFG3_REG 0x04 +#define ATAO_CFG3_DMAMODE (1 << 6) +#define ATAO_CFG3_CLKOUT (1 << 5) +#define ATAO_CFG3_RCLKEN (1 << 4) +#define ATAO_CFG3_DOUTEN2 (1 << 3) +#define ATAO_CFG3_DOUTEN1 (1 << 2) +#define ATAO_CFG3_EN2_5V (1 << 1) +#define ATAO_CFG3_SCANEN (1 << 0) +#define ATAO_82C53_BASE 0x06 +#define ATAO_CFG1_REG 0x0a +#define ATAO_CFG1_EXTINT2EN (1 << 15) +#define ATAO_CFG1_EXTINT1EN (1 << 14) +#define ATAO_CFG1_CNTINT2EN (1 << 13) +#define ATAO_CFG1_CNTINT1EN (1 << 12) +#define ATAO_CFG1_TCINTEN (1 << 11) +#define ATAO_CFG1_CNT1SRC (1 << 10) +#define ATAO_CFG1_CNT2SRC (1 << 9) +#define ATAO_CFG1_FIFOEN (1 << 8) +#define ATAO_CFG1_GRP2WR (1 << 7) +#define ATAO_CFG1_EXTUPDEN (1 << 6) +#define ATAO_CFG1_DMARQ (1 << 5) +#define ATAO_CFG1_DMAEN (1 << 4) +#define ATAO_CFG1_CH(x) (((x) & 0xf) << 0) +#define ATAO_STATUS_REG 0x0a +#define ATAO_STATUS_FH (1 << 6) +#define ATAO_STATUS_FE (1 << 5) +#define ATAO_STATUS_FF (1 << 4) +#define ATAO_STATUS_INT2 (1 << 3) +#define ATAO_STATUS_INT1 (1 << 2) +#define ATAO_STATUS_TCINT (1 << 1) +#define ATAO_STATUS_PROMOUT (1 << 0) +#define ATAO_FIFO_WRITE_REG 0x0c +#define ATAO_FIFO_CLEAR_REG 0x0c +#define ATAO_AO_REG(x) (0x0c + ((x) * 2)) + +/* registers with _2_ are accessed when GRP2WR is set in CFG1 */ +#define ATAO_2_DMATCCLR_REG 0x00 +#define ATAO_2_INT1CLR_REG 0x02 +#define ATAO_2_INT2CLR_REG 0x04 +#define ATAO_2_RTSISHFT_REG 0x06 +#define ATAO_2_RTSISHFT_RSI (1 << 0) +#define ATAO_2_RTSISTRB_REG 0x07 + +struct atao_board { + const char *name; + int n_ao_chans; +}; + +static const struct atao_board atao_boards[] = { + { + .name = "at-ao-6", + .n_ao_chans = 6, + }, { + .name = "at-ao-10", + .n_ao_chans = 10, + }, +}; + +struct atao_private { + unsigned short cfg1; + unsigned short cfg3; + + /* Used for caldac readback */ + unsigned char caldac[21]; +}; + +static void atao_select_reg_group(struct comedi_device *dev, int group) +{ + struct atao_private *devpriv = dev->private; + + if (group) + devpriv->cfg1 |= ATAO_CFG1_GRP2WR; + else + devpriv->cfg1 &= ~ATAO_CFG1_GRP2WR; + outw(devpriv->cfg1, dev->iobase + ATAO_CFG1_REG); +} + +static int atao_ao_insn_write(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) +{ + unsigned int chan = CR_CHAN(insn->chanspec); + unsigned int val = s->readback[chan]; + int i; + + if (chan == 0) + atao_select_reg_group(dev, 1); + + for (i = 0; i < insn->n; i++) { + val = data[i]; + + /* the hardware expects two's complement values */ + outw(comedi_offset_munge(s, val), + dev->iobase + ATAO_AO_REG(chan)); + } + s->readback[chan] = val; + + if (chan == 0) + atao_select_reg_group(dev, 0); + + return insn->n; +} + +static int atao_dio_insn_bits(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) +{ + if (comedi_dio_update_state(s, data)) + outw(s->state, dev->iobase + ATAO_DIO_REG); + + data[1] = inw(dev->iobase + ATAO_DIO_REG); + + return insn->n; +} + +static int atao_dio_insn_config(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) +{ + struct atao_private *devpriv = dev->private; + unsigned int chan = CR_CHAN(insn->chanspec); + unsigned int mask; + int ret; + + if (chan < 4) + mask = 0x0f; + else + mask = 0xf0; + + ret = comedi_dio_insn_config(dev, s, insn, data, mask); + if (ret) + return ret; + + if (s->io_bits & 0x0f) + devpriv->cfg3 |= ATAO_CFG3_DOUTEN1; + else + devpriv->cfg3 &= ~ATAO_CFG3_DOUTEN1; + if (s->io_bits & 0xf0) + devpriv->cfg3 |= ATAO_CFG3_DOUTEN2; + else + devpriv->cfg3 &= ~ATAO_CFG3_DOUTEN2; + + outw(devpriv->cfg3, dev->iobase + ATAO_CFG3_REG); + + return insn->n; +} + +/* + * There are three DAC8800 TrimDACs on the board. These are 8-channel, + * 8-bit DACs that are used to calibrate the Analog Output channels. + * The factory default calibration values are stored in the EEPROM. + * The TrimDACs, and EEPROM addresses, are mapped as: + * + * Channel EEPROM Description + * ----------------- ------ ----------------------------------- + * 0 - DAC0 Chan 0 0x30 AO Channel 0 Offset + * 1 - DAC0 Chan 1 0x31 AO Channel 0 Gain + * 2 - DAC0 Chan 2 0x32 AO Channel 1 Offset + * 3 - DAC0 Chan 3 0x33 AO Channel 1 Gain + * 4 - DAC0 Chan 4 0x34 AO Channel 2 Offset + * 5 - DAC0 Chan 5 0x35 AO Channel 2 Gain + * 6 - DAC0 Chan 6 0x36 AO Channel 3 Offset + * 7 - DAC0 Chan 7 0x37 AO Channel 3 Gain + * 8 - DAC1 Chan 0 0x38 AO Channel 4 Offset + * 9 - DAC1 Chan 1 0x39 AO Channel 4 Gain + * 10 - DAC1 Chan 2 0x3a AO Channel 5 Offset + * 11 - DAC1 Chan 3 0x3b AO Channel 5 Gain + * 12 - DAC1 Chan 4 0x3c 2.5V Offset + * 13 - DAC1 Chan 5 0x3d AO Channel 6 Offset (at-ao-10 only) + * 14 - DAC1 Chan 6 0x3e AO Channel 6 Gain (at-ao-10 only) + * 15 - DAC1 Chan 7 0x3f AO Channel 7 Offset (at-ao-10 only) + * 16 - DAC2 Chan 0 0x40 AO Channel 7 Gain (at-ao-10 only) + * 17 - DAC2 Chan 1 0x41 AO Channel 8 Offset (at-ao-10 only) + * 18 - DAC2 Chan 2 0x42 AO Channel 8 Gain (at-ao-10 only) + * 19 - DAC2 Chan 3 0x43 AO Channel 9 Offset (at-ao-10 only) + * 20 - DAC2 Chan 4 0x44 AO Channel 9 Gain (at-ao-10 only) + * DAC2 Chan 5 0x45 Reserved + * DAC2 Chan 6 0x46 Reserved + * DAC2 Chan 7 0x47 Reserved + */ +static int atao_calib_insn_write(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) +{ + unsigned int chan = CR_CHAN(insn->chanspec); + + if (insn->n) { + unsigned int val = data[insn->n - 1]; + unsigned int bitstring = ((chan & 0x7) << 8) | val; + unsigned int bits; + int bit; + + /* write the channel and last data value to the caldac */ + /* clock the bitstring to the caldac; MSB -> LSB */ + for (bit = 1 << 10; bit; bit >>= 1) { + bits = (bit & bitstring) ? ATAO_CFG2_SDATA : 0; + + outw(bits, dev->iobase + ATAO_CFG2_REG); + outw(bits | ATAO_CFG2_SCLK, + dev->iobase + ATAO_CFG2_REG); + } + + /* strobe the caldac to load the value */ + outw(ATAO_CFG2_CALLD(chan), dev->iobase + ATAO_CFG2_REG); + outw(ATAO_CFG2_CALLD_NOP, dev->iobase + ATAO_CFG2_REG); + + s->readback[chan] = val; + } + + return insn->n; +} + +static void atao_reset(struct comedi_device *dev) +{ + struct atao_private *devpriv = dev->private; + + /* This is the reset sequence described in the manual */ + + devpriv->cfg1 = 0; + outw(devpriv->cfg1, dev->iobase + ATAO_CFG1_REG); + + /* Put outputs of counter 1 and counter 2 in a high state */ + comedi_8254_set_mode(dev->pacer, 0, I8254_MODE4 | I8254_BINARY); + comedi_8254_set_mode(dev->pacer, 1, I8254_MODE4 | I8254_BINARY); + comedi_8254_write(dev->pacer, 0, 0x0003); + + outw(ATAO_CFG2_CALLD_NOP, dev->iobase + ATAO_CFG2_REG); + + devpriv->cfg3 = 0; + outw(devpriv->cfg3, dev->iobase + ATAO_CFG3_REG); + + inw(dev->iobase + ATAO_FIFO_CLEAR_REG); + + atao_select_reg_group(dev, 1); + outw(0, dev->iobase + ATAO_2_INT1CLR_REG); + outw(0, dev->iobase + ATAO_2_INT2CLR_REG); + outw(0, dev->iobase + ATAO_2_DMATCCLR_REG); + atao_select_reg_group(dev, 0); +} + +static int atao_attach(struct comedi_device *dev, struct comedi_devconfig *it) +{ + const struct atao_board *board = dev->board_ptr; + struct atao_private *devpriv; + struct comedi_subdevice *s; + int ret; + + ret = comedi_request_region(dev, it->options[0], 0x20); + if (ret) + return ret; + + devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv)); + if (!devpriv) + return -ENOMEM; + + dev->pacer = comedi_8254_init(dev->iobase + ATAO_82C53_BASE, + 0, I8254_IO8, 0); + if (!dev->pacer) + return -ENOMEM; + + ret = comedi_alloc_subdevices(dev, 4); + if (ret) + return ret; + + /* Analog Output subdevice */ + s = &dev->subdevices[0]; + s->type = COMEDI_SUBD_AO; + s->subdev_flags = SDF_WRITABLE; + s->n_chan = board->n_ao_chans; + s->maxdata = 0x0fff; + s->range_table = it->options[3] ? &range_unipolar10 : &range_bipolar10; + s->insn_write = atao_ao_insn_write; + + ret = comedi_alloc_subdev_readback(s); + if (ret) + return ret; + + /* Digital I/O subdevice */ + s = &dev->subdevices[1]; + s->type = COMEDI_SUBD_DIO; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE; + s->n_chan = 8; + s->maxdata = 1; + s->range_table = &range_digital; + s->insn_bits = atao_dio_insn_bits; + s->insn_config = atao_dio_insn_config; + + /* caldac subdevice */ + s = &dev->subdevices[2]; + s->type = COMEDI_SUBD_CALIB; + s->subdev_flags = SDF_WRITABLE | SDF_INTERNAL; + s->n_chan = (board->n_ao_chans * 2) + 1; + s->maxdata = 0xff; + s->insn_write = atao_calib_insn_write; + + ret = comedi_alloc_subdev_readback(s); + if (ret) + return ret; + + /* EEPROM subdevice */ + s = &dev->subdevices[3]; + s->type = COMEDI_SUBD_UNUSED; + + atao_reset(dev); + + return 0; +} + +static struct comedi_driver ni_at_ao_driver = { + .driver_name = "ni_at_ao", + .module = THIS_MODULE, + .attach = atao_attach, + .detach = comedi_legacy_detach, + .board_name = &atao_boards[0].name, + .offset = sizeof(struct atao_board), + .num_names = ARRAY_SIZE(atao_boards), +}; +module_comedi_driver(ni_at_ao_driver); + +MODULE_AUTHOR("Comedi http://www.comedi.org"); +MODULE_DESCRIPTION("Comedi driver for NI AT-AO-6/10 boards"); +MODULE_LICENSE("GPL"); |