diff options
Diffstat (limited to 'kernel/drivers/rapidio/devices/tsi721.c')
| -rw-r--r-- | kernel/drivers/rapidio/devices/tsi721.c | 2518 |
1 files changed, 2518 insertions, 0 deletions
diff --git a/kernel/drivers/rapidio/devices/tsi721.c b/kernel/drivers/rapidio/devices/tsi721.c new file mode 100644 index 000000000..eeca70ddb --- /dev/null +++ b/kernel/drivers/rapidio/devices/tsi721.c @@ -0,0 +1,2518 @@ +/* + * RapidIO mport driver for Tsi721 PCIExpress-to-SRIO bridge + * + * Copyright 2011 Integrated Device Technology, Inc. + * Alexandre Bounine <alexandre.bounine@idt.com> + * Chul Kim <chul.kim@idt.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <linux/io.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/rio.h> +#include <linux/rio_drv.h> +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/kfifo.h> +#include <linux/delay.h> + +#include "tsi721.h" + +#define DEBUG_PW /* Inbound Port-Write debugging */ + +static void tsi721_omsg_handler(struct tsi721_device *priv, int ch); +static void tsi721_imsg_handler(struct tsi721_device *priv, int ch); + +/** + * tsi721_lcread - read from local SREP config space + * @mport: RapidIO master port info + * @index: ID of RapdiIO interface + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @data: Value to be read into + * + * Generates a local SREP space read. Returns %0 on + * success or %-EINVAL on failure. + */ +static int tsi721_lcread(struct rio_mport *mport, int index, u32 offset, + int len, u32 *data) +{ + struct tsi721_device *priv = mport->priv; + + if (len != sizeof(u32)) + return -EINVAL; /* only 32-bit access is supported */ + + *data = ioread32(priv->regs + offset); + + return 0; +} + +/** + * tsi721_lcwrite - write into local SREP config space + * @mport: RapidIO master port info + * @index: ID of RapdiIO interface + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @data: Value to be written + * + * Generates a local write into SREP configuration space. Returns %0 on + * success or %-EINVAL on failure. + */ +static int tsi721_lcwrite(struct rio_mport *mport, int index, u32 offset, + int len, u32 data) +{ + struct tsi721_device *priv = mport->priv; + + if (len != sizeof(u32)) + return -EINVAL; /* only 32-bit access is supported */ + + iowrite32(data, priv->regs + offset); + + return 0; +} + +/** + * tsi721_maint_dma - Helper function to generate RapidIO maintenance + * transactions using designated Tsi721 DMA channel. + * @priv: pointer to tsi721 private data + * @sys_size: RapdiIO transport system size + * @destid: Destination ID of transaction + * @hopcount: Number of hops to target device + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @data: Location to be read from or write into + * @do_wr: Operation flag (1 == MAINT_WR) + * + * Generates a RapidIO maintenance transaction (Read or Write). + * Returns %0 on success and %-EINVAL or %-EFAULT on failure. + */ +static int tsi721_maint_dma(struct tsi721_device *priv, u32 sys_size, + u16 destid, u8 hopcount, u32 offset, int len, + u32 *data, int do_wr) +{ + void __iomem *regs = priv->regs + TSI721_DMAC_BASE(priv->mdma.ch_id); + struct tsi721_dma_desc *bd_ptr; + u32 rd_count, swr_ptr, ch_stat; + int i, err = 0; + u32 op = do_wr ? MAINT_WR : MAINT_RD; + + if (offset > (RIO_MAINT_SPACE_SZ - len) || (len != sizeof(u32))) + return -EINVAL; + + bd_ptr = priv->mdma.bd_base; + + rd_count = ioread32(regs + TSI721_DMAC_DRDCNT); + + /* Initialize DMA descriptor */ + bd_ptr[0].type_id = cpu_to_le32((DTYPE2 << 29) | (op << 19) | destid); + bd_ptr[0].bcount = cpu_to_le32((sys_size << 26) | 0x04); + bd_ptr[0].raddr_lo = cpu_to_le32((hopcount << 24) | offset); + bd_ptr[0].raddr_hi = 0; + if (do_wr) + bd_ptr[0].data[0] = cpu_to_be32p(data); + else + bd_ptr[0].data[0] = 0xffffffff; + + mb(); + + /* Start DMA operation */ + iowrite32(rd_count + 2, regs + TSI721_DMAC_DWRCNT); + ioread32(regs + TSI721_DMAC_DWRCNT); + i = 0; + + /* Wait until DMA transfer is finished */ + while ((ch_stat = ioread32(regs + TSI721_DMAC_STS)) + & TSI721_DMAC_STS_RUN) { + udelay(1); + if (++i >= 5000000) { + dev_dbg(&priv->pdev->dev, + "%s : DMA[%d] read timeout ch_status=%x\n", + __func__, priv->mdma.ch_id, ch_stat); + if (!do_wr) + *data = 0xffffffff; + err = -EIO; + goto err_out; + } + } + + if (ch_stat & TSI721_DMAC_STS_ABORT) { + /* If DMA operation aborted due to error, + * reinitialize DMA channel + */ + dev_dbg(&priv->pdev->dev, "%s : DMA ABORT ch_stat=%x\n", + __func__, ch_stat); + dev_dbg(&priv->pdev->dev, "OP=%d : destid=%x hc=%x off=%x\n", + do_wr ? MAINT_WR : MAINT_RD, destid, hopcount, offset); + iowrite32(TSI721_DMAC_INT_ALL, regs + TSI721_DMAC_INT); + iowrite32(TSI721_DMAC_CTL_INIT, regs + TSI721_DMAC_CTL); + udelay(10); + iowrite32(0, regs + TSI721_DMAC_DWRCNT); + udelay(1); + if (!do_wr) + *data = 0xffffffff; + err = -EIO; + goto err_out; + } + + if (!do_wr) + *data = be32_to_cpu(bd_ptr[0].data[0]); + + /* + * Update descriptor status FIFO RD pointer. + * NOTE: Skipping check and clear FIFO entries because we are waiting + * for transfer to be completed. + */ + swr_ptr = ioread32(regs + TSI721_DMAC_DSWP); + iowrite32(swr_ptr, regs + TSI721_DMAC_DSRP); +err_out: + + return err; +} + +/** + * tsi721_cread_dma - Generate a RapidIO maintenance read transaction + * using Tsi721 BDMA engine. + * @mport: RapidIO master port control structure + * @index: ID of RapdiIO interface + * @destid: Destination ID of transaction + * @hopcount: Number of hops to target device + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @val: Location to be read into + * + * Generates a RapidIO maintenance read transaction. + * Returns %0 on success and %-EINVAL or %-EFAULT on failure. + */ +static int tsi721_cread_dma(struct rio_mport *mport, int index, u16 destid, + u8 hopcount, u32 offset, int len, u32 *data) +{ + struct tsi721_device *priv = mport->priv; + + return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount, + offset, len, data, 0); +} + +/** + * tsi721_cwrite_dma - Generate a RapidIO maintenance write transaction + * using Tsi721 BDMA engine + * @mport: RapidIO master port control structure + * @index: ID of RapdiIO interface + * @destid: Destination ID of transaction + * @hopcount: Number of hops to target device + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @val: Value to be written + * + * Generates a RapidIO maintenance write transaction. + * Returns %0 on success and %-EINVAL or %-EFAULT on failure. + */ +static int tsi721_cwrite_dma(struct rio_mport *mport, int index, u16 destid, + u8 hopcount, u32 offset, int len, u32 data) +{ + struct tsi721_device *priv = mport->priv; + u32 temp = data; + + return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount, + offset, len, &temp, 1); +} + +/** + * tsi721_pw_handler - Tsi721 inbound port-write interrupt handler + * @mport: RapidIO master port structure + * + * Handles inbound port-write interrupts. Copies PW message from an internal + * buffer into PW message FIFO and schedules deferred routine to process + * queued messages. + */ +static int +tsi721_pw_handler(struct rio_mport *mport) +{ + struct tsi721_device *priv = mport->priv; + u32 pw_stat; + u32 pw_buf[TSI721_RIO_PW_MSG_SIZE/sizeof(u32)]; + + + pw_stat = ioread32(priv->regs + TSI721_RIO_PW_RX_STAT); + + if (pw_stat & TSI721_RIO_PW_RX_STAT_PW_VAL) { + pw_buf[0] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(0)); + pw_buf[1] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(1)); + pw_buf[2] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(2)); + pw_buf[3] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(3)); + + /* Queue PW message (if there is room in FIFO), + * otherwise discard it. + */ + spin_lock(&priv->pw_fifo_lock); + if (kfifo_avail(&priv->pw_fifo) >= TSI721_RIO_PW_MSG_SIZE) + kfifo_in(&priv->pw_fifo, pw_buf, + TSI721_RIO_PW_MSG_SIZE); + else + priv->pw_discard_count++; + spin_unlock(&priv->pw_fifo_lock); + } + + /* Clear pending PW interrupts */ + iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL, + priv->regs + TSI721_RIO_PW_RX_STAT); + + schedule_work(&priv->pw_work); + + return 0; +} + +static void tsi721_pw_dpc(struct work_struct *work) +{ + struct tsi721_device *priv = container_of(work, struct tsi721_device, + pw_work); + u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)]; /* Use full size PW message + buffer for RIO layer */ + + /* + * Process port-write messages + */ + while (kfifo_out_spinlocked(&priv->pw_fifo, (unsigned char *)msg_buffer, + TSI721_RIO_PW_MSG_SIZE, &priv->pw_fifo_lock)) { + /* Process one message */ +#ifdef DEBUG_PW + { + u32 i; + pr_debug("%s : Port-Write Message:", __func__); + for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32); ) { + pr_debug("0x%02x: %08x %08x %08x %08x", i*4, + msg_buffer[i], msg_buffer[i + 1], + msg_buffer[i + 2], msg_buffer[i + 3]); + i += 4; + } + pr_debug("\n"); + } +#endif + /* Pass the port-write message to RIO core for processing */ + rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer); + } +} + +/** + * tsi721_pw_enable - enable/disable port-write interface init + * @mport: Master port implementing the port write unit + * @enable: 1=enable; 0=disable port-write message handling + */ +static int tsi721_pw_enable(struct rio_mport *mport, int enable) +{ + struct tsi721_device *priv = mport->priv; + u32 rval; + + rval = ioread32(priv->regs + TSI721_RIO_EM_INT_ENABLE); + + if (enable) + rval |= TSI721_RIO_EM_INT_ENABLE_PW_RX; + else + rval &= ~TSI721_RIO_EM_INT_ENABLE_PW_RX; + + /* Clear pending PW interrupts */ + iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL, + priv->regs + TSI721_RIO_PW_RX_STAT); + /* Update enable bits */ + iowrite32(rval, priv->regs + TSI721_RIO_EM_INT_ENABLE); + + return 0; +} + +/** + * tsi721_dsend - Send a RapidIO doorbell + * @mport: RapidIO master port info + * @index: ID of RapidIO interface + * @destid: Destination ID of target device + * @data: 16-bit info field of RapidIO doorbell + * + * Sends a RapidIO doorbell message. Always returns %0. + */ +static int tsi721_dsend(struct rio_mport *mport, int index, + u16 destid, u16 data) +{ + struct tsi721_device *priv = mport->priv; + u32 offset; + + offset = (((mport->sys_size) ? RIO_TT_CODE_16 : RIO_TT_CODE_8) << 18) | + (destid << 2); + + dev_dbg(&priv->pdev->dev, + "Send Doorbell 0x%04x to destID 0x%x\n", data, destid); + iowrite16be(data, priv->odb_base + offset); + + return 0; +} + +/** + * tsi721_dbell_handler - Tsi721 doorbell interrupt handler + * @mport: RapidIO master port structure + * + * Handles inbound doorbell interrupts. Copies doorbell entry from an internal + * buffer into DB message FIFO and schedules deferred routine to process + * queued DBs. + */ +static int +tsi721_dbell_handler(struct rio_mport *mport) +{ + struct tsi721_device *priv = mport->priv; + u32 regval; + + /* Disable IDB interrupts */ + regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); + regval &= ~TSI721_SR_CHINT_IDBQRCV; + iowrite32(regval, + priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); + + schedule_work(&priv->idb_work); + + return 0; +} + +static void tsi721_db_dpc(struct work_struct *work) +{ + struct tsi721_device *priv = container_of(work, struct tsi721_device, + idb_work); + struct rio_mport *mport; + struct rio_dbell *dbell; + int found = 0; + u32 wr_ptr, rd_ptr; + u64 *idb_entry; + u32 regval; + union { + u64 msg; + u8 bytes[8]; + } idb; + + /* + * Process queued inbound doorbells + */ + mport = priv->mport; + + wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE; + rd_ptr = ioread32(priv->regs + TSI721_IDQ_RP(IDB_QUEUE)) % IDB_QSIZE; + + while (wr_ptr != rd_ptr) { + idb_entry = (u64 *)(priv->idb_base + + (TSI721_IDB_ENTRY_SIZE * rd_ptr)); + rd_ptr++; + rd_ptr %= IDB_QSIZE; + idb.msg = *idb_entry; + *idb_entry = 0; + + /* Process one doorbell */ + list_for_each_entry(dbell, &mport->dbells, node) { + if ((dbell->res->start <= DBELL_INF(idb.bytes)) && + (dbell->res->end >= DBELL_INF(idb.bytes))) { + found = 1; + break; + } + } + + if (found) { + dbell->dinb(mport, dbell->dev_id, DBELL_SID(idb.bytes), + DBELL_TID(idb.bytes), DBELL_INF(idb.bytes)); + } else { + dev_dbg(&priv->pdev->dev, + "spurious inb doorbell, sid %2.2x tid %2.2x" + " info %4.4x\n", DBELL_SID(idb.bytes), + DBELL_TID(idb.bytes), DBELL_INF(idb.bytes)); + } + + wr_ptr = ioread32(priv->regs + + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE; + } + + iowrite32(rd_ptr & (IDB_QSIZE - 1), + priv->regs + TSI721_IDQ_RP(IDB_QUEUE)); + + /* Re-enable IDB interrupts */ + regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); + regval |= TSI721_SR_CHINT_IDBQRCV; + iowrite32(regval, + priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); + + wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE; + if (wr_ptr != rd_ptr) + schedule_work(&priv->idb_work); +} + +/** + * tsi721_irqhandler - Tsi721 interrupt handler + * @irq: Linux interrupt number + * @ptr: Pointer to interrupt-specific data (mport structure) + * + * Handles Tsi721 interrupts signaled using MSI and INTA. Checks reported + * interrupt events and calls an event-specific handler(s). + */ +static irqreturn_t tsi721_irqhandler(int irq, void *ptr) +{ + struct rio_mport *mport = (struct rio_mport *)ptr; + struct tsi721_device *priv = mport->priv; + u32 dev_int; + u32 dev_ch_int; + u32 intval; + u32 ch_inte; + + /* For MSI mode disable all device-level interrupts */ + if (priv->flags & TSI721_USING_MSI) + iowrite32(0, priv->regs + TSI721_DEV_INTE); + + dev_int = ioread32(priv->regs + TSI721_DEV_INT); + if (!dev_int) + return IRQ_NONE; + + dev_ch_int = ioread32(priv->regs + TSI721_DEV_CHAN_INT); + + if (dev_int & TSI721_DEV_INT_SR2PC_CH) { + /* Service SR2PC Channel interrupts */ + if (dev_ch_int & TSI721_INT_SR2PC_CHAN(IDB_QUEUE)) { + /* Service Inbound Doorbell interrupt */ + intval = ioread32(priv->regs + + TSI721_SR_CHINT(IDB_QUEUE)); + if (intval & TSI721_SR_CHINT_IDBQRCV) + tsi721_dbell_handler(mport); + else + dev_info(&priv->pdev->dev, + "Unsupported SR_CH_INT %x\n", intval); + + /* Clear interrupts */ + iowrite32(intval, + priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); + ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); + } + } + + if (dev_int & TSI721_DEV_INT_SMSG_CH) { + int ch; + + /* + * Service channel interrupts from Messaging Engine + */ + + if (dev_ch_int & TSI721_INT_IMSG_CHAN_M) { /* Inbound Msg */ + /* Disable signaled OB MSG Channel interrupts */ + ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); + ch_inte &= ~(dev_ch_int & TSI721_INT_IMSG_CHAN_M); + iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE); + + /* + * Process Inbound Message interrupt for each MBOX + */ + for (ch = 4; ch < RIO_MAX_MBOX + 4; ch++) { + if (!(dev_ch_int & TSI721_INT_IMSG_CHAN(ch))) + continue; + tsi721_imsg_handler(priv, ch); + } + } + + if (dev_ch_int & TSI721_INT_OMSG_CHAN_M) { /* Outbound Msg */ + /* Disable signaled OB MSG Channel interrupts */ + ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); + ch_inte &= ~(dev_ch_int & TSI721_INT_OMSG_CHAN_M); + iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE); + + /* + * Process Outbound Message interrupts for each MBOX + */ + + for (ch = 0; ch < RIO_MAX_MBOX; ch++) { + if (!(dev_ch_int & TSI721_INT_OMSG_CHAN(ch))) + continue; + tsi721_omsg_handler(priv, ch); + } + } + } + + if (dev_int & TSI721_DEV_INT_SRIO) { + /* Service SRIO MAC interrupts */ + intval = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT); + if (intval & TSI721_RIO_EM_INT_STAT_PW_RX) + tsi721_pw_handler(mport); + } + +#ifdef CONFIG_RAPIDIO_DMA_ENGINE + if (dev_int & TSI721_DEV_INT_BDMA_CH) { + int ch; + + if (dev_ch_int & TSI721_INT_BDMA_CHAN_M) { + dev_dbg(&priv->pdev->dev, + "IRQ from DMA channel 0x%08x\n", dev_ch_int); + + for (ch = 0; ch < TSI721_DMA_MAXCH; ch++) { + if (!(dev_ch_int & TSI721_INT_BDMA_CHAN(ch))) + continue; + tsi721_bdma_handler(&priv->bdma[ch]); + } + } + } +#endif + + /* For MSI mode re-enable device-level interrupts */ + if (priv->flags & TSI721_USING_MSI) { + dev_int = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO | + TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH; + iowrite32(dev_int, priv->regs + TSI721_DEV_INTE); + } + + return IRQ_HANDLED; +} + +static void tsi721_interrupts_init(struct tsi721_device *priv) +{ + u32 intr; + + /* Enable IDB interrupts */ + iowrite32(TSI721_SR_CHINT_ALL, + priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); + iowrite32(TSI721_SR_CHINT_IDBQRCV, + priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); + + /* Enable SRIO MAC interrupts */ + iowrite32(TSI721_RIO_EM_DEV_INT_EN_INT, + priv->regs + TSI721_RIO_EM_DEV_INT_EN); + + /* Enable interrupts from channels in use */ +#ifdef CONFIG_RAPIDIO_DMA_ENGINE + intr = TSI721_INT_SR2PC_CHAN(IDB_QUEUE) | + (TSI721_INT_BDMA_CHAN_M & + ~TSI721_INT_BDMA_CHAN(TSI721_DMACH_MAINT)); +#else + intr = TSI721_INT_SR2PC_CHAN(IDB_QUEUE); +#endif + iowrite32(intr, priv->regs + TSI721_DEV_CHAN_INTE); + + if (priv->flags & TSI721_USING_MSIX) + intr = TSI721_DEV_INT_SRIO; + else + intr = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO | + TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH; + + iowrite32(intr, priv->regs + TSI721_DEV_INTE); + ioread32(priv->regs + TSI721_DEV_INTE); +} + +#ifdef CONFIG_PCI_MSI +/** + * tsi721_omsg_msix - MSI-X interrupt handler for outbound messaging + * @irq: Linux interrupt number + * @ptr: Pointer to interrupt-specific data (mport structure) + * + * Handles outbound messaging interrupts signaled using MSI-X. + */ +static irqreturn_t tsi721_omsg_msix(int irq, void *ptr) +{ + struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv; + int mbox; + + mbox = (irq - priv->msix[TSI721_VECT_OMB0_DONE].vector) % RIO_MAX_MBOX; + tsi721_omsg_handler(priv, mbox); + return IRQ_HANDLED; +} + +/** + * tsi721_imsg_msix - MSI-X interrupt handler for inbound messaging + * @irq: Linux interrupt number + * @ptr: Pointer to interrupt-specific data (mport structure) + * + * Handles inbound messaging interrupts signaled using MSI-X. + */ +static irqreturn_t tsi721_imsg_msix(int irq, void *ptr) +{ + struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv; + int mbox; + + mbox = (irq - priv->msix[TSI721_VECT_IMB0_RCV].vector) % RIO_MAX_MBOX; + tsi721_imsg_handler(priv, mbox + 4); + return IRQ_HANDLED; +} + +/** + * tsi721_srio_msix - Tsi721 MSI-X SRIO MAC interrupt handler + * @irq: Linux interrupt number + * @ptr: Pointer to interrupt-specific data (mport structure) + * + * Handles Tsi721 interrupts from SRIO MAC. + */ +static irqreturn_t tsi721_srio_msix(int irq, void *ptr) +{ + struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv; + u32 srio_int; + + /* Service SRIO MAC interrupts */ + srio_int = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT); + if (srio_int & TSI721_RIO_EM_INT_STAT_PW_RX) + tsi721_pw_handler((struct rio_mport *)ptr); + + return IRQ_HANDLED; +} + +/** + * tsi721_sr2pc_ch_msix - Tsi721 MSI-X SR2PC Channel interrupt handler + * @irq: Linux interrupt number + * @ptr: Pointer to interrupt-specific data (mport structure) + * + * Handles Tsi721 interrupts from SR2PC Channel. + * NOTE: At this moment services only one SR2PC channel associated with inbound + * doorbells. + */ +static irqreturn_t tsi721_sr2pc_ch_msix(int irq, void *ptr) +{ + struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv; + u32 sr_ch_int; + + /* Service Inbound DB interrupt from SR2PC channel */ + sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); + if (sr_ch_int & TSI721_SR_CHINT_IDBQRCV) + tsi721_dbell_handler((struct rio_mport *)ptr); + + /* Clear interrupts */ + iowrite32(sr_ch_int, priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); + /* Read back to ensure that interrupt was cleared */ + sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); + + return IRQ_HANDLED; +} + +/** + * tsi721_request_msix - register interrupt service for MSI-X mode. + * @mport: RapidIO master port structure + * + * Registers MSI-X interrupt service routines for interrupts that are active + * immediately after mport initialization. Messaging interrupt service routines + * should be registered during corresponding open requests. + */ +static int tsi721_request_msix(struct rio_mport *mport) +{ + struct tsi721_device *priv = mport->priv; + int err = 0; + + err = request_irq(priv->msix[TSI721_VECT_IDB].vector, + tsi721_sr2pc_ch_msix, 0, + priv->msix[TSI721_VECT_IDB].irq_name, (void *)mport); + if (err) + goto out; + + err = request_irq(priv->msix[TSI721_VECT_PWRX].vector, + tsi721_srio_msix, 0, + priv->msix[TSI721_VECT_PWRX].irq_name, (void *)mport); + if (err) + free_irq( + priv->msix[TSI721_VECT_IDB].vector, + (void *)mport); +out: + return err; +} + +/** + * tsi721_enable_msix - Attempts to enable MSI-X support for Tsi721. + * @priv: pointer to tsi721 private data + * + * Configures MSI-X support for Tsi721. Supports only an exact number + * of requested vectors. + */ +static int tsi721_enable_msix(struct tsi721_device *priv) +{ + struct msix_entry entries[TSI721_VECT_MAX]; + int err; + int i; + + entries[TSI721_VECT_IDB].entry = TSI721_MSIX_SR2PC_IDBQ_RCV(IDB_QUEUE); + entries[TSI721_VECT_PWRX].entry = TSI721_MSIX_SRIO_MAC_INT; + + /* + * Initialize MSI-X entries for Messaging Engine: + * this driver supports four RIO mailboxes (inbound and outbound) + * NOTE: Inbound message MBOX 0...4 use IB channels 4...7. Therefore + * offset +4 is added to IB MBOX number. + */ + for (i = 0; i < RIO_MAX_MBOX; i++) { + entries[TSI721_VECT_IMB0_RCV + i].entry = + TSI721_MSIX_IMSG_DQ_RCV(i + 4); + entries[TSI721_VECT_IMB0_INT + i].entry = + TSI721_MSIX_IMSG_INT(i + 4); + entries[TSI721_VECT_OMB0_DONE + i].entry = + TSI721_MSIX_OMSG_DONE(i); + entries[TSI721_VECT_OMB0_INT + i].entry = + TSI721_MSIX_OMSG_INT(i); + } + +#ifdef CONFIG_RAPIDIO_DMA_ENGINE + /* + * Initialize MSI-X entries for Block DMA Engine: + * this driver supports XXX DMA channels + * (one is reserved for SRIO maintenance transactions) + */ + for (i = 0; i < TSI721_DMA_CHNUM; i++) { + entries[TSI721_VECT_DMA0_DONE + i].entry = + TSI721_MSIX_DMACH_DONE(i); + entries[TSI721_VECT_DMA0_INT + i].entry = + TSI721_MSIX_DMACH_INT(i); + } +#endif /* CONFIG_RAPIDIO_DMA_ENGINE */ + + err = pci_enable_msix_exact(priv->pdev, entries, ARRAY_SIZE(entries)); + if (err) { + dev_err(&priv->pdev->dev, + "Failed to enable MSI-X (err=%d)\n", err); + return err; + } + + /* + * Copy MSI-X vector information into tsi721 private structure + */ + priv->msix[TSI721_VECT_IDB].vector = entries[TSI721_VECT_IDB].vector; + snprintf(priv->msix[TSI721_VECT_IDB].irq_name, IRQ_DEVICE_NAME_MAX, + DRV_NAME "-idb@pci:%s", pci_name(priv->pdev)); + priv->msix[TSI721_VECT_PWRX].vector = entries[TSI721_VECT_PWRX].vector; + snprintf(priv->msix[TSI721_VECT_PWRX].irq_name, IRQ_DEVICE_NAME_MAX, + DRV_NAME "-pwrx@pci:%s", pci_name(priv->pdev)); + + for (i = 0; i < RIO_MAX_MBOX; i++) { + priv->msix[TSI721_VECT_IMB0_RCV + i].vector = + entries[TSI721_VECT_IMB0_RCV + i].vector; + snprintf(priv->msix[TSI721_VECT_IMB0_RCV + i].irq_name, + IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbr%d@pci:%s", + i, pci_name(priv->pdev)); + + priv->msix[TSI721_VECT_IMB0_INT + i].vector = + entries[TSI721_VECT_IMB0_INT + i].vector; + snprintf(priv->msix[TSI721_VECT_IMB0_INT + i].irq_name, + IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbi%d@pci:%s", + i, pci_name(priv->pdev)); + + priv->msix[TSI721_VECT_OMB0_DONE + i].vector = + entries[TSI721_VECT_OMB0_DONE + i].vector; + snprintf(priv->msix[TSI721_VECT_OMB0_DONE + i].irq_name, + IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombd%d@pci:%s", + i, pci_name(priv->pdev)); + + priv->msix[TSI721_VECT_OMB0_INT + i].vector = + entries[TSI721_VECT_OMB0_INT + i].vector; + snprintf(priv->msix[TSI721_VECT_OMB0_INT + i].irq_name, + IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombi%d@pci:%s", + i, pci_name(priv->pdev)); + } + +#ifdef CONFIG_RAPIDIO_DMA_ENGINE + for (i = 0; i < TSI721_DMA_CHNUM; i++) { + priv->msix[TSI721_VECT_DMA0_DONE + i].vector = + entries[TSI721_VECT_DMA0_DONE + i].vector; + snprintf(priv->msix[TSI721_VECT_DMA0_DONE + i].irq_name, + IRQ_DEVICE_NAME_MAX, DRV_NAME "-dmad%d@pci:%s", + i, pci_name(priv->pdev)); + + priv->msix[TSI721_VECT_DMA0_INT + i].vector = + entries[TSI721_VECT_DMA0_INT + i].vector; + snprintf(priv->msix[TSI721_VECT_DMA0_INT + i].irq_name, + IRQ_DEVICE_NAME_MAX, DRV_NAME "-dmai%d@pci:%s", + i, pci_name(priv->pdev)); + } +#endif /* CONFIG_RAPIDIO_DMA_ENGINE */ + + return 0; +} +#endif /* CONFIG_PCI_MSI */ + +static int tsi721_request_irq(struct rio_mport *mport) +{ + struct tsi721_device *priv = mport->priv; + int err; + +#ifdef CONFIG_PCI_MSI + if (priv->flags & TSI721_USING_MSIX) + err = tsi721_request_msix(mport); + else +#endif + err = request_irq(priv->pdev->irq, tsi721_irqhandler, + (priv->flags & TSI721_USING_MSI) ? 0 : IRQF_SHARED, + DRV_NAME, (void *)mport); + + if (err) + dev_err(&priv->pdev->dev, + "Unable to allocate interrupt, Error: %d\n", err); + + return err; +} + +/** + * tsi721_init_pc2sr_mapping - initializes outbound (PCIe->SRIO) + * translation regions. + * @priv: pointer to tsi721 private data + * + * Disables SREP translation regions. + */ +static void tsi721_init_pc2sr_mapping(struct tsi721_device *priv) +{ + int i; + + /* Disable all PC2SR translation windows */ + for (i = 0; i < TSI721_OBWIN_NUM; i++) + iowrite32(0, priv->regs + TSI721_OBWINLB(i)); +} + +/** + * tsi721_rio_map_inb_mem -- Mapping inbound memory region. + * @mport: RapidIO master port + * @lstart: Local memory space start address. + * @rstart: RapidIO space start address. + * @size: The mapping region size. + * @flags: Flags for mapping. 0 for using default flags. + * + * Return: 0 -- Success. + * + * This function will create the inbound mapping + * from rstart to lstart. + */ +static int tsi721_rio_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart, + u64 rstart, u32 size, u32 flags) +{ + struct tsi721_device *priv = mport->priv; + int i; + u32 regval; + + if (!is_power_of_2(size) || size < 0x1000 || + ((u64)lstart & (size - 1)) || (rstart & (size - 1))) + return -EINVAL; + + /* Search for free inbound translation window */ + for (i = 0; i < TSI721_IBWIN_NUM; i++) { + regval = ioread32(priv->regs + TSI721_IBWIN_LB(i)); + if (!(regval & TSI721_IBWIN_LB_WEN)) + break; + } + + if (i >= TSI721_IBWIN_NUM) { + dev_err(&priv->pdev->dev, + "Unable to find free inbound window\n"); + return -EBUSY; + } + + iowrite32(TSI721_IBWIN_SIZE(size) << 8, + priv->regs + TSI721_IBWIN_SZ(i)); + + iowrite32(((u64)lstart >> 32), priv->regs + TSI721_IBWIN_TUA(i)); + iowrite32(((u64)lstart & TSI721_IBWIN_TLA_ADD), + priv->regs + TSI721_IBWIN_TLA(i)); + + iowrite32(rstart >> 32, priv->regs + TSI721_IBWIN_UB(i)); + iowrite32((rstart & TSI721_IBWIN_LB_BA) | TSI721_IBWIN_LB_WEN, + priv->regs + TSI721_IBWIN_LB(i)); + dev_dbg(&priv->pdev->dev, + "Configured IBWIN%d mapping (RIO_0x%llx -> PCIe_0x%llx)\n", + i, rstart, (unsigned long long)lstart); + + return 0; +} + +/** + * fsl_rio_unmap_inb_mem -- Unmapping inbound memory region. + * @mport: RapidIO master port + * @lstart: Local memory space start address. + */ +static void tsi721_rio_unmap_inb_mem(struct rio_mport *mport, + dma_addr_t lstart) +{ + struct tsi721_device *priv = mport->priv; + int i; + u64 addr; + u32 regval; + + /* Search for matching active inbound translation window */ + for (i = 0; i < TSI721_IBWIN_NUM; i++) { + regval = ioread32(priv->regs + TSI721_IBWIN_LB(i)); + if (regval & TSI721_IBWIN_LB_WEN) { + regval = ioread32(priv->regs + TSI721_IBWIN_TUA(i)); + addr = (u64)regval << 32; + regval = ioread32(priv->regs + TSI721_IBWIN_TLA(i)); + addr |= regval & TSI721_IBWIN_TLA_ADD; + + if (addr == (u64)lstart) { + iowrite32(0, priv->regs + TSI721_IBWIN_LB(i)); + break; + } + } + } +} + +/** + * tsi721_init_sr2pc_mapping - initializes inbound (SRIO->PCIe) + * translation regions. + * @priv: pointer to tsi721 private data + * + * Disables inbound windows. + */ +static void tsi721_init_sr2pc_mapping(struct tsi721_device *priv) +{ + int i; + + /* Disable all SR2PC inbound windows */ + for (i = 0; i < TSI721_IBWIN_NUM; i++) + iowrite32(0, priv->regs + TSI721_IBWIN_LB(i)); +} + +/** + * tsi721_port_write_init - Inbound port write interface init + * @priv: pointer to tsi721 private data + * + * Initializes inbound port write handler. + * Returns %0 on success or %-ENOMEM on failure. + */ +static int tsi721_port_write_init(struct tsi721_device *priv) +{ + priv->pw_discard_count = 0; + INIT_WORK(&priv->pw_work, tsi721_pw_dpc); + spin_lock_init(&priv->pw_fifo_lock); + if (kfifo_alloc(&priv->pw_fifo, + TSI721_RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) { + dev_err(&priv->pdev->dev, "PW FIFO allocation failed\n"); + return -ENOMEM; + } + + /* Use reliable port-write capture mode */ + iowrite32(TSI721_RIO_PW_CTL_PWC_REL, priv->regs + TSI721_RIO_PW_CTL); + return 0; +} + +static int tsi721_doorbell_init(struct tsi721_device *priv) +{ + /* Outbound Doorbells do not require any setup. + * Tsi721 uses dedicated PCI BAR1 to generate doorbells. + * That BAR1 was mapped during the probe routine. + */ + + /* Initialize Inbound Doorbell processing DPC and queue */ + priv->db_discard_count = 0; + INIT_WORK(&priv->idb_work, tsi721_db_dpc); + + /* Allocate buffer for inbound doorbells queue */ + priv->idb_base = dma_zalloc_coherent(&priv->pdev->dev, + IDB_QSIZE * TSI721_IDB_ENTRY_SIZE, + &priv->idb_dma, GFP_KERNEL); + if (!priv->idb_base) + return -ENOMEM; + + dev_dbg(&priv->pdev->dev, "Allocated IDB buffer @ %p (phys = %llx)\n", + priv->idb_base, (unsigned long long)priv->idb_dma); + + iowrite32(TSI721_IDQ_SIZE_VAL(IDB_QSIZE), + priv->regs + TSI721_IDQ_SIZE(IDB_QUEUE)); + iowrite32(((u64)priv->idb_dma >> 32), + priv->regs + TSI721_IDQ_BASEU(IDB_QUEUE)); + iowrite32(((u64)priv->idb_dma & TSI721_IDQ_BASEL_ADDR), + priv->regs + TSI721_IDQ_BASEL(IDB_QUEUE)); + /* Enable accepting all inbound doorbells */ + iowrite32(0, priv->regs + TSI721_IDQ_MASK(IDB_QUEUE)); + + iowrite32(TSI721_IDQ_INIT, priv->regs + TSI721_IDQ_CTL(IDB_QUEUE)); + + iowrite32(0, priv->regs + TSI721_IDQ_RP(IDB_QUEUE)); + + return 0; +} + +static void tsi721_doorbell_free(struct tsi721_device *priv) +{ + if (priv->idb_base == NULL) + return; + + /* Free buffer allocated for inbound doorbell queue */ + dma_free_coherent(&priv->pdev->dev, IDB_QSIZE * TSI721_IDB_ENTRY_SIZE, + priv->idb_base, priv->idb_dma); + priv->idb_base = NULL; +} + +/** + * tsi721_bdma_maint_init - Initialize maintenance request BDMA channel. + * @priv: pointer to tsi721 private data + * + * Initialize BDMA channel allocated for RapidIO maintenance read/write + * request generation + * Returns %0 on success or %-ENOMEM on failure. + */ +static int tsi721_bdma_maint_init(struct tsi721_device *priv) +{ + struct tsi721_dma_desc *bd_ptr; + u64 *sts_ptr; + dma_addr_t bd_phys, sts_phys; + int sts_size; + int bd_num = 2; + void __iomem *regs; + + dev_dbg(&priv->pdev->dev, + "Init Block DMA Engine for Maintenance requests, CH%d\n", + TSI721_DMACH_MAINT); + + /* + * Initialize DMA channel for maintenance requests + */ + + priv->mdma.ch_id = TSI721_DMACH_MAINT; + regs = priv->regs + TSI721_DMAC_BASE(TSI721_DMACH_MAINT); + + /* Allocate space for DMA descriptors */ + bd_ptr = dma_zalloc_coherent(&priv->pdev->dev, + bd_num * sizeof(struct tsi721_dma_desc), + &bd_phys, GFP_KERNEL); + if (!bd_ptr) + return -ENOMEM; + + priv->mdma.bd_num = bd_num; + priv->mdma.bd_phys = bd_phys; + priv->mdma.bd_base = bd_ptr; + + dev_dbg(&priv->pdev->dev, "DMA descriptors @ %p (phys = %llx)\n", + bd_ptr, (unsigned long long)bd_phys); + + /* Allocate space for descriptor status FIFO */ + sts_size = (bd_num >= TSI721_DMA_MINSTSSZ) ? + bd_num : TSI721_DMA_MINSTSSZ; + sts_size = roundup_pow_of_two(sts_size); + sts_ptr = dma_zalloc_coherent(&priv->pdev->dev, + sts_size * sizeof(struct tsi721_dma_sts), + &sts_phys, GFP_KERNEL); + if (!sts_ptr) { + /* Free space allocated for DMA descriptors */ + dma_free_coherent(&priv->pdev->dev, + bd_num * sizeof(struct tsi721_dma_desc), + bd_ptr, bd_phys); + priv->mdma.bd_base = NULL; + return -ENOMEM; + } + + priv->mdma.sts_phys = sts_phys; + priv->mdma.sts_base = sts_ptr; + priv->mdma.sts_size = sts_size; + + dev_dbg(&priv->pdev->dev, + "desc status FIFO @ %p (phys = %llx) size=0x%x\n", + sts_ptr, (unsigned long long)sts_phys, sts_size); + + /* Initialize DMA descriptors ring */ + bd_ptr[bd_num - 1].type_id = cpu_to_le32(DTYPE3 << 29); + bd_ptr[bd_num - 1].next_lo = cpu_to_le32((u64)bd_phys & + TSI721_DMAC_DPTRL_MASK); + bd_ptr[bd_num - 1].next_hi = cpu_to_le32((u64)bd_phys >> 32); + + /* Setup DMA descriptor pointers */ + iowrite32(((u64)bd_phys >> 32), regs + TSI721_DMAC_DPTRH); + iowrite32(((u64)bd_phys & TSI721_DMAC_DPTRL_MASK), + regs + TSI721_DMAC_DPTRL); + + /* Setup descriptor status FIFO */ + iowrite32(((u64)sts_phys >> 32), regs + TSI721_DMAC_DSBH); + iowrite32(((u64)sts_phys & TSI721_DMAC_DSBL_MASK), + regs + TSI721_DMAC_DSBL); + iowrite32(TSI721_DMAC_DSSZ_SIZE(sts_size), + regs + TSI721_DMAC_DSSZ); + + /* Clear interrupt bits */ + iowrite32(TSI721_DMAC_INT_ALL, regs + TSI721_DMAC_INT); + + ioread32(regs + TSI721_DMAC_INT); + + /* Toggle DMA channel initialization */ + iowrite32(TSI721_DMAC_CTL_INIT, regs + TSI721_DMAC_CTL); + ioread32(regs + TSI721_DMAC_CTL); + udelay(10); + + return 0; +} + +static int tsi721_bdma_maint_free(struct tsi721_device *priv) +{ + u32 ch_stat; + struct tsi721_bdma_maint *mdma = &priv->mdma; + void __iomem *regs = priv->regs + TSI721_DMAC_BASE(mdma->ch_id); + + if (mdma->bd_base == NULL) + return 0; + + /* Check if DMA channel still running */ + ch_stat = ioread32(regs + TSI721_DMAC_STS); + if (ch_stat & TSI721_DMAC_STS_RUN) + return -EFAULT; + + /* Put DMA channel into init state */ + iowrite32(TSI721_DMAC_CTL_INIT, regs + TSI721_DMAC_CTL); + + /* Free space allocated for DMA descriptors */ + dma_free_coherent(&priv->pdev->dev, + mdma->bd_num * sizeof(struct tsi721_dma_desc), + mdma->bd_base, mdma->bd_phys); + mdma->bd_base = NULL; + + /* Free space allocated for status FIFO */ + dma_free_coherent(&priv->pdev->dev, + mdma->sts_size * sizeof(struct tsi721_dma_sts), + mdma->sts_base, mdma->sts_phys); + mdma->sts_base = NULL; + return 0; +} + +/* Enable Inbound Messaging Interrupts */ +static void +tsi721_imsg_interrupt_enable(struct tsi721_device *priv, int ch, + u32 inte_mask) +{ + u32 rval; + + if (!inte_mask) + return; + + /* Clear pending Inbound Messaging interrupts */ + iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch)); + + /* Enable Inbound Messaging interrupts */ + rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch)); + iowrite32(rval | inte_mask, priv->regs + TSI721_IBDMAC_INTE(ch)); + + if (priv->flags & TSI721_USING_MSIX) + return; /* Finished if we are in MSI-X mode */ + + /* + * For MSI and INTA interrupt signalling we need to enable next levels + */ + + /* Enable Device Channel Interrupt */ + rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); + iowrite32(rval | TSI721_INT_IMSG_CHAN(ch), + priv->regs + TSI721_DEV_CHAN_INTE); +} + +/* Disable Inbound Messaging Interrupts */ +static void +tsi721_imsg_interrupt_disable(struct tsi721_device *priv, int ch, + u32 inte_mask) +{ + u32 rval; + + if (!inte_mask) + return; + + /* Clear pending Inbound Messaging interrupts */ + iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch)); + + /* Disable Inbound Messaging interrupts */ + rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch)); + rval &= ~inte_mask; + iowrite32(rval, priv->regs + TSI721_IBDMAC_INTE(ch)); + + if (priv->flags & TSI721_USING_MSIX) + return; /* Finished if we are in MSI-X mode */ + + /* + * For MSI and INTA interrupt signalling we need to disable next levels + */ + + /* Disable Device Channel Interrupt */ + rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); + rval &= ~TSI721_INT_IMSG_CHAN(ch); + iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE); +} + +/* Enable Outbound Messaging interrupts */ +static void +tsi721_omsg_interrupt_enable(struct tsi721_device *priv, int ch, + u32 inte_mask) +{ + u32 rval; + + if (!inte_mask) + return; + + /* Clear pending Outbound Messaging interrupts */ + iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch)); + + /* Enable Outbound Messaging channel interrupts */ + rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch)); + iowrite32(rval | inte_mask, priv->regs + TSI721_OBDMAC_INTE(ch)); + + if (priv->flags & TSI721_USING_MSIX) + return; /* Finished if we are in MSI-X mode */ + + /* + * For MSI and INTA interrupt signalling we need to enable next levels + */ + + /* Enable Device Channel Interrupt */ + rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); + iowrite32(rval | TSI721_INT_OMSG_CHAN(ch), + priv->regs + TSI721_DEV_CHAN_INTE); +} + +/* Disable Outbound Messaging interrupts */ +static void +tsi721_omsg_interrupt_disable(struct tsi721_device *priv, int ch, + u32 inte_mask) +{ + u32 rval; + + if (!inte_mask) + return; + + /* Clear pending Outbound Messaging interrupts */ + iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch)); + + /* Disable Outbound Messaging interrupts */ + rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch)); + rval &= ~inte_mask; + iowrite32(rval, priv->regs + TSI721_OBDMAC_INTE(ch)); + + if (priv->flags & TSI721_USING_MSIX) + return; /* Finished if we are in MSI-X mode */ + + /* + * For MSI and INTA interrupt signalling we need to disable next levels + */ + + /* Disable Device Channel Interrupt */ + rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); + rval &= ~TSI721_INT_OMSG_CHAN(ch); + iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE); +} + +/** + * tsi721_add_outb_message - Add message to the Tsi721 outbound message queue + * @mport: Master port with outbound message queue + * @rdev: Target of outbound message + * @mbox: Outbound mailbox + * @buffer: Message to add to outbound queue + * @len: Length of message + */ +static int +tsi721_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox, + void *buffer, size_t len) +{ + struct tsi721_device *priv = mport->priv; + struct tsi721_omsg_desc *desc; + u32 tx_slot; + + if (!priv->omsg_init[mbox] || + len > TSI721_MSG_MAX_SIZE || len < 8) + return -EINVAL; + + tx_slot = priv->omsg_ring[mbox].tx_slot; + + /* Copy copy message into transfer buffer */ + memcpy(priv->omsg_ring[mbox].omq_base[tx_slot], buffer, len); + + if (len & 0x7) + len += 8; + + /* Build descriptor associated with buffer */ + desc = priv->omsg_ring[mbox].omd_base; + desc[tx_slot].type_id = cpu_to_le32((DTYPE4 << 29) | rdev->destid); + if (tx_slot % 4 == 0) + desc[tx_slot].type_id |= cpu_to_le32(TSI721_OMD_IOF); + + desc[tx_slot].msg_info = + cpu_to_le32((mport->sys_size << 26) | (mbox << 22) | + (0xe << 12) | (len & 0xff8)); + desc[tx_slot].bufptr_lo = + cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] & + 0xffffffff); + desc[tx_slot].bufptr_hi = + cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] >> 32); + + priv->omsg_ring[mbox].wr_count++; + + /* Go to next descriptor */ + if (++priv->omsg_ring[mbox].tx_slot == priv->omsg_ring[mbox].size) { + priv->omsg_ring[mbox].tx_slot = 0; + /* Move through the ring link descriptor at the end */ + priv->omsg_ring[mbox].wr_count++; + } + + mb(); + + /* Set new write count value */ + iowrite32(priv->omsg_ring[mbox].wr_count, + priv->regs + TSI721_OBDMAC_DWRCNT(mbox)); + ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox)); + + return 0; +} + +/** + * tsi721_omsg_handler - Outbound Message Interrupt Handler + * @priv: pointer to tsi721 private data + * @ch: number of OB MSG channel to service + * + * Services channel interrupts from outbound messaging engine. + */ +static void tsi721_omsg_handler(struct tsi721_device *priv, int ch) +{ + u32 omsg_int; + + spin_lock(&priv->omsg_ring[ch].lock); + + omsg_int = ioread32(priv->regs + TSI721_OBDMAC_INT(ch)); + + if (omsg_int & TSI721_OBDMAC_INT_ST_FULL) + dev_info(&priv->pdev->dev, + "OB MBOX%d: Status FIFO is full\n", ch); + + if (omsg_int & (TSI721_OBDMAC_INT_DONE | TSI721_OBDMAC_INT_IOF_DONE)) { + u32 srd_ptr; + u64 *sts_ptr, last_ptr = 0, prev_ptr = 0; + int i, j; + u32 tx_slot; + + /* + * Find last successfully processed descriptor + */ + + /* Check and clear descriptor status FIFO entries */ + srd_ptr = priv->omsg_ring[ch].sts_rdptr; + sts_ptr = priv->omsg_ring[ch].sts_base; + j = srd_ptr * 8; + while (sts_ptr[j]) { + for (i = 0; i < 8 && sts_ptr[j]; i++, j++) { + prev_ptr = last_ptr; + last_ptr = le64_to_cpu(sts_ptr[j]); + sts_ptr[j] = 0; + } + + ++srd_ptr; + srd_ptr %= priv->omsg_ring[ch].sts_size; + j = srd_ptr * 8; + } + + if (last_ptr == 0) + goto no_sts_update; + + priv->omsg_ring[ch].sts_rdptr = srd_ptr; + iowrite32(srd_ptr, priv->regs + TSI721_OBDMAC_DSRP(ch)); + + if (!priv->mport->outb_msg[ch].mcback) + goto no_sts_update; + + /* Inform upper layer about transfer completion */ + + tx_slot = (last_ptr - (u64)priv->omsg_ring[ch].omd_phys)/ + sizeof(struct tsi721_omsg_desc); + + /* + * Check if this is a Link Descriptor (LD). + * If yes, ignore LD and use descriptor processed + * before LD. + */ + if (tx_slot == priv->omsg_ring[ch].size) { + if (prev_ptr) + tx_slot = (prev_ptr - + (u64)priv->omsg_ring[ch].omd_phys)/ + sizeof(struct tsi721_omsg_desc); + else + goto no_sts_update; + } + + /* Move slot index to the next message to be sent */ + ++tx_slot; + if (tx_slot == priv->omsg_ring[ch].size) + tx_slot = 0; + BUG_ON(tx_slot >= priv->omsg_ring[ch].size); + priv->mport->outb_msg[ch].mcback(priv->mport, + priv->omsg_ring[ch].dev_id, ch, + tx_slot); + } + +no_sts_update: + + if (omsg_int & TSI721_OBDMAC_INT_ERROR) { + /* + * Outbound message operation aborted due to error, + * reinitialize OB MSG channel + */ + + dev_dbg(&priv->pdev->dev, "OB MSG ABORT ch_stat=%x\n", + ioread32(priv->regs + TSI721_OBDMAC_STS(ch))); + + iowrite32(TSI721_OBDMAC_INT_ERROR, + priv->regs + TSI721_OBDMAC_INT(ch)); + iowrite32(TSI721_OBDMAC_CTL_INIT, + priv->regs + TSI721_OBDMAC_CTL(ch)); + ioread32(priv->regs + TSI721_OBDMAC_CTL(ch)); + + /* Inform upper level to clear all pending tx slots */ + if (priv->mport->outb_msg[ch].mcback) + priv->mport->outb_msg[ch].mcback(priv->mport, + priv->omsg_ring[ch].dev_id, ch, + priv->omsg_ring[ch].tx_slot); + /* Synch tx_slot tracking */ + iowrite32(priv->omsg_ring[ch].tx_slot, + priv->regs + TSI721_OBDMAC_DRDCNT(ch)); + ioread32(priv->regs + TSI721_OBDMAC_DRDCNT(ch)); + priv->omsg_ring[ch].wr_count = priv->omsg_ring[ch].tx_slot; + priv->omsg_ring[ch].sts_rdptr = 0; + } + + /* Clear channel interrupts */ + iowrite32(omsg_int, priv->regs + TSI721_OBDMAC_INT(ch)); + + if (!(priv->flags & TSI721_USING_MSIX)) { + u32 ch_inte; + + /* Re-enable channel interrupts */ + ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); + ch_inte |= TSI721_INT_OMSG_CHAN(ch); + iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE); + } + + spin_unlock(&priv->omsg_ring[ch].lock); +} + +/** + * tsi721_open_outb_mbox - Initialize Tsi721 outbound mailbox + * @mport: Master port implementing Outbound Messaging Engine + * @dev_id: Device specific pointer to pass on event + * @mbox: Mailbox to open + * @entries: Number of entries in the outbound mailbox ring + */ +static int tsi721_open_outb_mbox(struct rio_mport *mport, void *dev_id, + int mbox, int entries) +{ + struct tsi721_device *priv = mport->priv; + struct tsi721_omsg_desc *bd_ptr; + int i, rc = 0; + + if ((entries < TSI721_OMSGD_MIN_RING_SIZE) || + (entries > (TSI721_OMSGD_RING_SIZE)) || + (!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) { + rc = -EINVAL; + goto out; + } + + priv->omsg_ring[mbox].dev_id = dev_id; + priv->omsg_ring[mbox].size = entries; + priv->omsg_ring[mbox].sts_rdptr = 0; + spin_lock_init(&priv->omsg_ring[mbox].lock); + + /* Outbound Msg Buffer allocation based on + the number of maximum descriptor entries */ + for (i = 0; i < entries; i++) { + priv->omsg_ring[mbox].omq_base[i] = + dma_alloc_coherent( + &priv->pdev->dev, TSI721_MSG_BUFFER_SIZE, + &priv->omsg_ring[mbox].omq_phys[i], + GFP_KERNEL); + if (priv->omsg_ring[mbox].omq_base[i] == NULL) { + dev_dbg(&priv->pdev->dev, + "Unable to allocate OB MSG data buffer for" + " MBOX%d\n", mbox); + rc = -ENOMEM; + goto out_buf; + } + } + + /* Outbound message descriptor allocation */ + priv->omsg_ring[mbox].omd_base = dma_alloc_coherent( + &priv->pdev->dev, + (entries + 1) * sizeof(struct tsi721_omsg_desc), + &priv->omsg_ring[mbox].omd_phys, GFP_KERNEL); + if (priv->omsg_ring[mbox].omd_base == NULL) { + dev_dbg(&priv->pdev->dev, + "Unable to allocate OB MSG descriptor memory " + "for MBOX%d\n", mbox); + rc = -ENOMEM; + goto out_buf; + } + + priv->omsg_ring[mbox].tx_slot = 0; + + /* Outbound message descriptor status FIFO allocation */ + priv->omsg_ring[mbox].sts_size = roundup_pow_of_two(entries + 1); + priv->omsg_ring[mbox].sts_base = dma_zalloc_coherent(&priv->pdev->dev, + priv->omsg_ring[mbox].sts_size * + sizeof(struct tsi721_dma_sts), + &priv->omsg_ring[mbox].sts_phys, GFP_KERNEL); + if (priv->omsg_ring[mbox].sts_base == NULL) { + dev_dbg(&priv->pdev->dev, + "Unable to allocate OB MSG descriptor status FIFO " + "for MBOX%d\n", mbox); + rc = -ENOMEM; + goto out_desc; + } + + /* + * Configure Outbound Messaging Engine + */ + + /* Setup Outbound Message descriptor pointer */ + iowrite32(((u64)priv->omsg_ring[mbox].omd_phys >> 32), + priv->regs + TSI721_OBDMAC_DPTRH(mbox)); + iowrite32(((u64)priv->omsg_ring[mbox].omd_phys & + TSI721_OBDMAC_DPTRL_MASK), + priv->regs + TSI721_OBDMAC_DPTRL(mbox)); + + /* Setup Outbound Message descriptor status FIFO */ + iowrite32(((u64)priv->omsg_ring[mbox].sts_phys >> 32), + priv->regs + TSI721_OBDMAC_DSBH(mbox)); + iowrite32(((u64)priv->omsg_ring[mbox].sts_phys & + TSI721_OBDMAC_DSBL_MASK), + priv->regs + TSI721_OBDMAC_DSBL(mbox)); + iowrite32(TSI721_DMAC_DSSZ_SIZE(priv->omsg_ring[mbox].sts_size), + priv->regs + (u32)TSI721_OBDMAC_DSSZ(mbox)); + + /* Enable interrupts */ + +#ifdef CONFIG_PCI_MSI + if (priv->flags & TSI721_USING_MSIX) { + /* Request interrupt service if we are in MSI-X mode */ + rc = request_irq( + priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector, + tsi721_omsg_msix, 0, + priv->msix[TSI721_VECT_OMB0_DONE + mbox].irq_name, + (void *)mport); + + if (rc) { + dev_dbg(&priv->pdev->dev, + "Unable to allocate MSI-X interrupt for " + "OBOX%d-DONE\n", mbox); + goto out_stat; + } + + rc = request_irq(priv->msix[TSI721_VECT_OMB0_INT + mbox].vector, + tsi721_omsg_msix, 0, + priv->msix[TSI721_VECT_OMB0_INT + mbox].irq_name, + (void *)mport); + + if (rc) { + dev_dbg(&priv->pdev->dev, + "Unable to allocate MSI-X interrupt for " + "MBOX%d-INT\n", mbox); + free_irq( + priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector, + (void *)mport); + goto out_stat; + } + } +#endif /* CONFIG_PCI_MSI */ + + tsi721_omsg_interrupt_enable(priv, mbox, TSI721_OBDMAC_INT_ALL); + + /* Initialize Outbound Message descriptors ring */ + bd_ptr = priv->omsg_ring[mbox].omd_base; + bd_ptr[entries].type_id = cpu_to_le32(DTYPE5 << 29); + bd_ptr[entries].msg_info = 0; + bd_ptr[entries].next_lo = + cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys & + TSI721_OBDMAC_DPTRL_MASK); + bd_ptr[entries].next_hi = + cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys >> 32); + priv->omsg_ring[mbox].wr_count = 0; + mb(); + + /* Initialize Outbound Message engine */ + iowrite32(TSI721_OBDMAC_CTL_INIT, priv->regs + TSI721_OBDMAC_CTL(mbox)); + ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox)); + udelay(10); + + priv->omsg_init[mbox] = 1; + + return 0; + +#ifdef CONFIG_PCI_MSI +out_stat: + dma_free_coherent(&priv->pdev->dev, + priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts), + priv->omsg_ring[mbox].sts_base, + priv->omsg_ring[mbox].sts_phys); + + priv->omsg_ring[mbox].sts_base = NULL; +#endif /* CONFIG_PCI_MSI */ + +out_desc: + dma_free_coherent(&priv->pdev->dev, + (entries + 1) * sizeof(struct tsi721_omsg_desc), + priv->omsg_ring[mbox].omd_base, + priv->omsg_ring[mbox].omd_phys); + + priv->omsg_ring[mbox].omd_base = NULL; + +out_buf: + for (i = 0; i < priv->omsg_ring[mbox].size; i++) { + if (priv->omsg_ring[mbox].omq_base[i]) { + dma_free_coherent(&priv->pdev->dev, + TSI721_MSG_BUFFER_SIZE, + priv->omsg_ring[mbox].omq_base[i], + priv->omsg_ring[mbox].omq_phys[i]); + + priv->omsg_ring[mbox].omq_base[i] = NULL; + } + } + +out: + return rc; +} + +/** + * tsi721_close_outb_mbox - Close Tsi721 outbound mailbox + * @mport: Master port implementing the outbound message unit + * @mbox: Mailbox to close + */ +static void tsi721_close_outb_mbox(struct rio_mport *mport, int mbox) +{ + struct tsi721_device *priv = mport->priv; + u32 i; + + if (!priv->omsg_init[mbox]) + return; + priv->omsg_init[mbox] = 0; + + /* Disable Interrupts */ + + tsi721_omsg_interrupt_disable(priv, mbox, TSI721_OBDMAC_INT_ALL); + +#ifdef CONFIG_PCI_MSI + if (priv->flags & TSI721_USING_MSIX) { + free_irq(priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector, + (void *)mport); + free_irq(priv->msix[TSI721_VECT_OMB0_INT + mbox].vector, + (void *)mport); + } +#endif /* CONFIG_PCI_MSI */ + + /* Free OMSG Descriptor Status FIFO */ + dma_free_coherent(&priv->pdev->dev, + priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts), + priv->omsg_ring[mbox].sts_base, + priv->omsg_ring[mbox].sts_phys); + + priv->omsg_ring[mbox].sts_base = NULL; + + /* Free OMSG descriptors */ + dma_free_coherent(&priv->pdev->dev, + (priv->omsg_ring[mbox].size + 1) * + sizeof(struct tsi721_omsg_desc), + priv->omsg_ring[mbox].omd_base, + priv->omsg_ring[mbox].omd_phys); + + priv->omsg_ring[mbox].omd_base = NULL; + + /* Free message buffers */ + for (i = 0; i < priv->omsg_ring[mbox].size; i++) { + if (priv->omsg_ring[mbox].omq_base[i]) { + dma_free_coherent(&priv->pdev->dev, + TSI721_MSG_BUFFER_SIZE, + priv->omsg_ring[mbox].omq_base[i], + priv->omsg_ring[mbox].omq_phys[i]); + + priv->omsg_ring[mbox].omq_base[i] = NULL; + } + } +} + +/** + * tsi721_imsg_handler - Inbound Message Interrupt Handler + * @priv: pointer to tsi721 private data + * @ch: inbound message channel number to service + * + * Services channel interrupts from inbound messaging engine. + */ +static void tsi721_imsg_handler(struct tsi721_device *priv, int ch) +{ + u32 mbox = ch - 4; + u32 imsg_int; + + spin_lock(&priv->imsg_ring[mbox].lock); + + imsg_int = ioread32(priv->regs + TSI721_IBDMAC_INT(ch)); + + if (imsg_int & TSI721_IBDMAC_INT_SRTO) + dev_info(&priv->pdev->dev, "IB MBOX%d SRIO timeout\n", + mbox); + + if (imsg_int & TSI721_IBDMAC_INT_PC_ERROR) + dev_info(&priv->pdev->dev, "IB MBOX%d PCIe error\n", + mbox); + + if (imsg_int & TSI721_IBDMAC_INT_FQ_LOW) + dev_info(&priv->pdev->dev, + "IB MBOX%d IB free queue low\n", mbox); + + /* Clear IB channel interrupts */ + iowrite32(imsg_int, priv->regs + TSI721_IBDMAC_INT(ch)); + + /* If an IB Msg is received notify the upper layer */ + if (imsg_int & TSI721_IBDMAC_INT_DQ_RCV && + priv->mport->inb_msg[mbox].mcback) + priv->mport->inb_msg[mbox].mcback(priv->mport, + priv->imsg_ring[mbox].dev_id, mbox, -1); + + if (!(priv->flags & TSI721_USING_MSIX)) { + u32 ch_inte; + + /* Re-enable channel interrupts */ + ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); + ch_inte |= TSI721_INT_IMSG_CHAN(ch); + iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE); + } + + spin_unlock(&priv->imsg_ring[mbox].lock); +} + +/** + * tsi721_open_inb_mbox - Initialize Tsi721 inbound mailbox + * @mport: Master port implementing the Inbound Messaging Engine + * @dev_id: Device specific pointer to pass on event + * @mbox: Mailbox to open + * @entries: Number of entries in the inbound mailbox ring + */ +static int tsi721_open_inb_mbox(struct rio_mport *mport, void *dev_id, + int mbox, int entries) +{ + struct tsi721_device *priv = mport->priv; + int ch = mbox + 4; + int i; + u64 *free_ptr; + int rc = 0; + + if ((entries < TSI721_IMSGD_MIN_RING_SIZE) || + (entries > TSI721_IMSGD_RING_SIZE) || + (!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) { + rc = -EINVAL; + goto out; + } + + /* Initialize IB Messaging Ring */ + priv->imsg_ring[mbox].dev_id = dev_id; + priv->imsg_ring[mbox].size = entries; + priv->imsg_ring[mbox].rx_slot = 0; + priv->imsg_ring[mbox].desc_rdptr = 0; + priv->imsg_ring[mbox].fq_wrptr = 0; + for (i = 0; i < priv->imsg_ring[mbox].size; i++) + priv->imsg_ring[mbox].imq_base[i] = NULL; + spin_lock_init(&priv->imsg_ring[mbox].lock); + + /* Allocate buffers for incoming messages */ + priv->imsg_ring[mbox].buf_base = + dma_alloc_coherent(&priv->pdev->dev, + entries * TSI721_MSG_BUFFER_SIZE, + &priv->imsg_ring[mbox].buf_phys, + GFP_KERNEL); + + if (priv->imsg_ring[mbox].buf_base == NULL) { + dev_err(&priv->pdev->dev, + "Failed to allocate buffers for IB MBOX%d\n", mbox); + rc = -ENOMEM; + goto out; + } + + /* Allocate memory for circular free list */ + priv->imsg_ring[mbox].imfq_base = + dma_alloc_coherent(&priv->pdev->dev, + entries * 8, + &priv->imsg_ring[mbox].imfq_phys, + GFP_KERNEL); + + if (priv->imsg_ring[mbox].imfq_base == NULL) { + dev_err(&priv->pdev->dev, + "Failed to allocate free queue for IB MBOX%d\n", mbox); + rc = -ENOMEM; + goto out_buf; + } + + /* Allocate memory for Inbound message descriptors */ + priv->imsg_ring[mbox].imd_base = + dma_alloc_coherent(&priv->pdev->dev, + entries * sizeof(struct tsi721_imsg_desc), + &priv->imsg_ring[mbox].imd_phys, GFP_KERNEL); + + if (priv->imsg_ring[mbox].imd_base == NULL) { + dev_err(&priv->pdev->dev, + "Failed to allocate descriptor memory for IB MBOX%d\n", + mbox); + rc = -ENOMEM; + goto out_dma; + } + + /* Fill free buffer pointer list */ + free_ptr = priv->imsg_ring[mbox].imfq_base; + for (i = 0; i < entries; i++) + free_ptr[i] = cpu_to_le64( + (u64)(priv->imsg_ring[mbox].buf_phys) + + i * 0x1000); + + mb(); + + /* + * For mapping of inbound SRIO Messages into appropriate queues we need + * to set Inbound Device ID register in the messaging engine. We do it + * once when first inbound mailbox is requested. + */ + if (!(priv->flags & TSI721_IMSGID_SET)) { + iowrite32((u32)priv->mport->host_deviceid, + priv->regs + TSI721_IB_DEVID); + priv->flags |= TSI721_IMSGID_SET; + } + + /* + * Configure Inbound Messaging channel (ch = mbox + 4) + */ + + /* Setup Inbound Message free queue */ + iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys >> 32), + priv->regs + TSI721_IBDMAC_FQBH(ch)); + iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys & + TSI721_IBDMAC_FQBL_MASK), + priv->regs+TSI721_IBDMAC_FQBL(ch)); + iowrite32(TSI721_DMAC_DSSZ_SIZE(entries), + priv->regs + TSI721_IBDMAC_FQSZ(ch)); + + /* Setup Inbound Message descriptor queue */ + iowrite32(((u64)priv->imsg_ring[mbox].imd_phys >> 32), + priv->regs + TSI721_IBDMAC_DQBH(ch)); + iowrite32(((u32)priv->imsg_ring[mbox].imd_phys & + (u32)TSI721_IBDMAC_DQBL_MASK), + priv->regs+TSI721_IBDMAC_DQBL(ch)); + iowrite32(TSI721_DMAC_DSSZ_SIZE(entries), + priv->regs + TSI721_IBDMAC_DQSZ(ch)); + + /* Enable interrupts */ + +#ifdef CONFIG_PCI_MSI + if (priv->flags & TSI721_USING_MSIX) { + /* Request interrupt service if we are in MSI-X mode */ + rc = request_irq(priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector, + tsi721_imsg_msix, 0, + priv->msix[TSI721_VECT_IMB0_RCV + mbox].irq_name, + (void *)mport); + + if (rc) { + dev_dbg(&priv->pdev->dev, + "Unable to allocate MSI-X interrupt for " + "IBOX%d-DONE\n", mbox); + goto out_desc; + } + + rc = request_irq(priv->msix[TSI721_VECT_IMB0_INT + mbox].vector, + tsi721_imsg_msix, 0, + priv->msix[TSI721_VECT_IMB0_INT + mbox].irq_name, + (void *)mport); + + if (rc) { + dev_dbg(&priv->pdev->dev, + "Unable to allocate MSI-X interrupt for " + "IBOX%d-INT\n", mbox); + free_irq( + priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector, + (void *)mport); + goto out_desc; + } + } +#endif /* CONFIG_PCI_MSI */ + + tsi721_imsg_interrupt_enable(priv, ch, TSI721_IBDMAC_INT_ALL); + + /* Initialize Inbound Message Engine */ + iowrite32(TSI721_IBDMAC_CTL_INIT, priv->regs + TSI721_IBDMAC_CTL(ch)); + ioread32(priv->regs + TSI721_IBDMAC_CTL(ch)); + udelay(10); + priv->imsg_ring[mbox].fq_wrptr = entries - 1; + iowrite32(entries - 1, priv->regs + TSI721_IBDMAC_FQWP(ch)); + + priv->imsg_init[mbox] = 1; + return 0; + +#ifdef CONFIG_PCI_MSI +out_desc: + dma_free_coherent(&priv->pdev->dev, + priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc), + priv->imsg_ring[mbox].imd_base, + priv->imsg_ring[mbox].imd_phys); + + priv->imsg_ring[mbox].imd_base = NULL; +#endif /* CONFIG_PCI_MSI */ + +out_dma: + dma_free_coherent(&priv->pdev->dev, + priv->imsg_ring[mbox].size * 8, + priv->imsg_ring[mbox].imfq_base, + priv->imsg_ring[mbox].imfq_phys); + + priv->imsg_ring[mbox].imfq_base = NULL; + +out_buf: + dma_free_coherent(&priv->pdev->dev, + priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE, + priv->imsg_ring[mbox].buf_base, + priv->imsg_ring[mbox].buf_phys); + + priv->imsg_ring[mbox].buf_base = NULL; + +out: + return rc; +} + +/** + * tsi721_close_inb_mbox - Shut down Tsi721 inbound mailbox + * @mport: Master port implementing the Inbound Messaging Engine + * @mbox: Mailbox to close + */ +static void tsi721_close_inb_mbox(struct rio_mport *mport, int mbox) +{ + struct tsi721_device *priv = mport->priv; + u32 rx_slot; + int ch = mbox + 4; + + if (!priv->imsg_init[mbox]) /* mbox isn't initialized yet */ + return; + priv->imsg_init[mbox] = 0; + + /* Disable Inbound Messaging Engine */ + + /* Disable Interrupts */ + tsi721_imsg_interrupt_disable(priv, ch, TSI721_OBDMAC_INT_MASK); + +#ifdef CONFIG_PCI_MSI + if (priv->flags & TSI721_USING_MSIX) { + free_irq(priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector, + (void *)mport); + free_irq(priv->msix[TSI721_VECT_IMB0_INT + mbox].vector, + (void *)mport); + } +#endif /* CONFIG_PCI_MSI */ + + /* Clear Inbound Buffer Queue */ + for (rx_slot = 0; rx_slot < priv->imsg_ring[mbox].size; rx_slot++) + priv->imsg_ring[mbox].imq_base[rx_slot] = NULL; + + /* Free memory allocated for message buffers */ + dma_free_coherent(&priv->pdev->dev, + priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE, + priv->imsg_ring[mbox].buf_base, + priv->imsg_ring[mbox].buf_phys); + + priv->imsg_ring[mbox].buf_base = NULL; + + /* Free memory allocated for free pointr list */ + dma_free_coherent(&priv->pdev->dev, + priv->imsg_ring[mbox].size * 8, + priv->imsg_ring[mbox].imfq_base, + priv->imsg_ring[mbox].imfq_phys); + + priv->imsg_ring[mbox].imfq_base = NULL; + + /* Free memory allocated for RX descriptors */ + dma_free_coherent(&priv->pdev->dev, + priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc), + priv->imsg_ring[mbox].imd_base, + priv->imsg_ring[mbox].imd_phys); + + priv->imsg_ring[mbox].imd_base = NULL; +} + +/** + * tsi721_add_inb_buffer - Add buffer to the Tsi721 inbound message queue + * @mport: Master port implementing the Inbound Messaging Engine + * @mbox: Inbound mailbox number + * @buf: Buffer to add to inbound queue + */ +static int tsi721_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf) +{ + struct tsi721_device *priv = mport->priv; + u32 rx_slot; + int rc = 0; + + rx_slot = priv->imsg_ring[mbox].rx_slot; + if (priv->imsg_ring[mbox].imq_base[rx_slot]) { + dev_err(&priv->pdev->dev, + "Error adding inbound buffer %d, buffer exists\n", + rx_slot); + rc = -EINVAL; + goto out; + } + + priv->imsg_ring[mbox].imq_base[rx_slot] = buf; + + if (++priv->imsg_ring[mbox].rx_slot == priv->imsg_ring[mbox].size) + priv->imsg_ring[mbox].rx_slot = 0; + +out: + return rc; +} + +/** + * tsi721_get_inb_message - Fetch inbound message from the Tsi721 MSG Queue + * @mport: Master port implementing the Inbound Messaging Engine + * @mbox: Inbound mailbox number + * + * Returns pointer to the message on success or NULL on failure. + */ +static void *tsi721_get_inb_message(struct rio_mport *mport, int mbox) +{ + struct tsi721_device *priv = mport->priv; + struct tsi721_imsg_desc *desc; + u32 rx_slot; + void *rx_virt = NULL; + u64 rx_phys; + void *buf = NULL; + u64 *free_ptr; + int ch = mbox + 4; + int msg_size; + + if (!priv->imsg_init[mbox]) + return NULL; + + desc = priv->imsg_ring[mbox].imd_base; + desc += priv->imsg_ring[mbox].desc_rdptr; + + if (!(le32_to_cpu(desc->msg_info) & TSI721_IMD_HO)) + goto out; + + rx_slot = priv->imsg_ring[mbox].rx_slot; + while (priv->imsg_ring[mbox].imq_base[rx_slot] == NULL) { + if (++rx_slot == priv->imsg_ring[mbox].size) + rx_slot = 0; + } + + rx_phys = ((u64)le32_to_cpu(desc->bufptr_hi) << 32) | + le32_to_cpu(desc->bufptr_lo); + + rx_virt = priv->imsg_ring[mbox].buf_base + + (rx_phys - (u64)priv->imsg_ring[mbox].buf_phys); + + buf = priv->imsg_ring[mbox].imq_base[rx_slot]; + msg_size = le32_to_cpu(desc->msg_info) & TSI721_IMD_BCOUNT; + if (msg_size == 0) + msg_size = RIO_MAX_MSG_SIZE; + + memcpy(buf, rx_virt, msg_size); + priv->imsg_ring[mbox].imq_base[rx_slot] = NULL; + + desc->msg_info &= cpu_to_le32(~TSI721_IMD_HO); + if (++priv->imsg_ring[mbox].desc_rdptr == priv->imsg_ring[mbox].size) + priv->imsg_ring[mbox].desc_rdptr = 0; + + iowrite32(priv->imsg_ring[mbox].desc_rdptr, + priv->regs + TSI721_IBDMAC_DQRP(ch)); + + /* Return free buffer into the pointer list */ + free_ptr = priv->imsg_ring[mbox].imfq_base; + free_ptr[priv->imsg_ring[mbox].fq_wrptr] = cpu_to_le64(rx_phys); + + if (++priv->imsg_ring[mbox].fq_wrptr == priv->imsg_ring[mbox].size) + priv->imsg_ring[mbox].fq_wrptr = 0; + + iowrite32(priv->imsg_ring[mbox].fq_wrptr, + priv->regs + TSI721_IBDMAC_FQWP(ch)); +out: + return buf; +} + +/** + * tsi721_messages_init - Initialization of Messaging Engine + * @priv: pointer to tsi721 private data + * + * Configures Tsi721 messaging engine. + */ +static int tsi721_messages_init(struct tsi721_device *priv) +{ + int ch; + + iowrite32(0, priv->regs + TSI721_SMSG_ECC_LOG); + iowrite32(0, priv->regs + TSI721_RETRY_GEN_CNT); + iowrite32(0, priv->regs + TSI721_RETRY_RX_CNT); + + /* Set SRIO Message Request/Response Timeout */ + iowrite32(TSI721_RQRPTO_VAL, priv->regs + TSI721_RQRPTO); + + /* Initialize Inbound Messaging Engine Registers */ + for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++) { + /* Clear interrupt bits */ + iowrite32(TSI721_IBDMAC_INT_MASK, + priv->regs + TSI721_IBDMAC_INT(ch)); + /* Clear Status */ + iowrite32(0, priv->regs + TSI721_IBDMAC_STS(ch)); + + iowrite32(TSI721_SMSG_ECC_COR_LOG_MASK, + priv->regs + TSI721_SMSG_ECC_COR_LOG(ch)); + iowrite32(TSI721_SMSG_ECC_NCOR_MASK, + priv->regs + TSI721_SMSG_ECC_NCOR(ch)); + } + + return 0; +} + +/** + * tsi721_disable_ints - disables all device interrupts + * @priv: pointer to tsi721 private data + */ +static void tsi721_disable_ints(struct tsi721_device *priv) +{ + int ch; + + /* Disable all device level interrupts */ + iowrite32(0, priv->regs + TSI721_DEV_INTE); + + /* Disable all Device Channel interrupts */ + iowrite32(0, priv->regs + TSI721_DEV_CHAN_INTE); + + /* Disable all Inbound Msg Channel interrupts */ + for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++) + iowrite32(0, priv->regs + TSI721_IBDMAC_INTE(ch)); + + /* Disable all Outbound Msg Channel interrupts */ + for (ch = 0; ch < TSI721_OMSG_CHNUM; ch++) + iowrite32(0, priv->regs + TSI721_OBDMAC_INTE(ch)); + + /* Disable all general messaging interrupts */ + iowrite32(0, priv->regs + TSI721_SMSG_INTE); + + /* Disable all BDMA Channel interrupts */ + for (ch = 0; ch < TSI721_DMA_MAXCH; ch++) + iowrite32(0, + priv->regs + TSI721_DMAC_BASE(ch) + TSI721_DMAC_INTE); + + /* Disable all general BDMA interrupts */ + iowrite32(0, priv->regs + TSI721_BDMA_INTE); + + /* Disable all SRIO Channel interrupts */ + for (ch = 0; ch < TSI721_SRIO_MAXCH; ch++) + iowrite32(0, priv->regs + TSI721_SR_CHINTE(ch)); + + /* Disable all general SR2PC interrupts */ + iowrite32(0, priv->regs + TSI721_SR2PC_GEN_INTE); + + /* Disable all PC2SR interrupts */ + iowrite32(0, priv->regs + TSI721_PC2SR_INTE); + + /* Disable all I2C interrupts */ + iowrite32(0, priv->regs + TSI721_I2C_INT_ENABLE); + + /* Disable SRIO MAC interrupts */ + iowrite32(0, priv->regs + TSI721_RIO_EM_INT_ENABLE); + iowrite32(0, priv->regs + TSI721_RIO_EM_DEV_INT_EN); +} + +/** + * tsi721_setup_mport - Setup Tsi721 as RapidIO subsystem master port + * @priv: pointer to tsi721 private data + * + * Configures Tsi721 as RapidIO master port. + */ +static int tsi721_setup_mport(struct tsi721_device *priv) +{ + struct pci_dev *pdev = priv->pdev; + int err = 0; + struct rio_ops *ops; + + struct rio_mport *mport; + + ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL); + if (!ops) { + dev_dbg(&pdev->dev, "Unable to allocate memory for rio_ops\n"); + return -ENOMEM; + } + + ops->lcread = tsi721_lcread; + ops->lcwrite = tsi721_lcwrite; + ops->cread = tsi721_cread_dma; + ops->cwrite = tsi721_cwrite_dma; + ops->dsend = tsi721_dsend; + ops->open_inb_mbox = tsi721_open_inb_mbox; + ops->close_inb_mbox = tsi721_close_inb_mbox; + ops->open_outb_mbox = tsi721_open_outb_mbox; + ops->close_outb_mbox = tsi721_close_outb_mbox; + ops->add_outb_message = tsi721_add_outb_message; + ops->add_inb_buffer = tsi721_add_inb_buffer; + ops->get_inb_message = tsi721_get_inb_message; + ops->map_inb = tsi721_rio_map_inb_mem; + ops->unmap_inb = tsi721_rio_unmap_inb_mem; + + mport = kzalloc(sizeof(struct rio_mport), GFP_KERNEL); + if (!mport) { + kfree(ops); + dev_dbg(&pdev->dev, "Unable to allocate memory for mport\n"); + return -ENOMEM; + } + + mport->ops = ops; + mport->index = 0; + mport->sys_size = 0; /* small system */ + mport->phy_type = RIO_PHY_SERIAL; + mport->priv = (void *)priv; + mport->phys_efptr = 0x100; + mport->dev.parent = &pdev->dev; + priv->mport = mport; + + INIT_LIST_HEAD(&mport->dbells); + + rio_init_dbell_res(&mport->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff); + rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 3); + rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 3); + snprintf(mport->name, RIO_MAX_MPORT_NAME, "%s(%s)", + dev_driver_string(&pdev->dev), dev_name(&pdev->dev)); + + /* Hook up interrupt handler */ + +#ifdef CONFIG_PCI_MSI + if (!tsi721_enable_msix(priv)) + priv->flags |= TSI721_USING_MSIX; + else if (!pci_enable_msi(pdev)) + priv->flags |= TSI721_USING_MSI; + else + dev_info(&pdev->dev, + "MSI/MSI-X is not available. Using legacy INTx.\n"); +#endif /* CONFIG_PCI_MSI */ + + err = tsi721_request_irq(mport); + + if (!err) { + tsi721_interrupts_init(priv); + ops->pwenable = tsi721_pw_enable; + } else { + dev_err(&pdev->dev, "Unable to get assigned PCI IRQ " + "vector %02X err=0x%x\n", pdev->irq, err); + goto err_exit; + } + +#ifdef CONFIG_RAPIDIO_DMA_ENGINE + tsi721_register_dma(priv); +#endif + /* Enable SRIO link */ + iowrite32(ioread32(priv->regs + TSI721_DEVCTL) | + TSI721_DEVCTL_SRBOOT_CMPL, + priv->regs + TSI721_DEVCTL); + + rio_register_mport(mport); + + if (mport->host_deviceid >= 0) + iowrite32(RIO_PORT_GEN_HOST | RIO_PORT_GEN_MASTER | + RIO_PORT_GEN_DISCOVERED, + priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR)); + else + iowrite32(0, priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR)); + + return 0; + +err_exit: + kfree(mport); + kfree(ops); + return err; +} + +static int tsi721_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct tsi721_device *priv; + int err; + + priv = kzalloc(sizeof(struct tsi721_device), GFP_KERNEL); + if (priv == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for device\n"); + err = -ENOMEM; + goto err_exit; + } + + err = pci_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "Failed to enable PCI device\n"); + goto err_clean; + } + + priv->pdev = pdev; + +#ifdef DEBUG + { + int i; + for (i = 0; i <= PCI_STD_RESOURCE_END; i++) { + dev_dbg(&pdev->dev, "res[%d] @ 0x%llx (0x%lx, 0x%lx)\n", + i, (unsigned long long)pci_resource_start(pdev, i), + (unsigned long)pci_resource_len(pdev, i), + pci_resource_flags(pdev, i)); + } + } +#endif + /* + * Verify BAR configuration + */ + + /* BAR_0 (registers) must be 512KB+ in 32-bit address space */ + if (!(pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM) || + pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM_64 || + pci_resource_len(pdev, BAR_0) < TSI721_REG_SPACE_SIZE) { + dev_err(&pdev->dev, + "Missing or misconfigured CSR BAR0, aborting.\n"); + err = -ENODEV; + goto err_disable_pdev; + } + + /* BAR_1 (outbound doorbells) must be 16MB+ in 32-bit address space */ + if (!(pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM) || + pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM_64 || + pci_resource_len(pdev, BAR_1) < TSI721_DB_WIN_SIZE) { + dev_err(&pdev->dev, + "Missing or misconfigured Doorbell BAR1, aborting.\n"); + err = -ENODEV; + goto err_disable_pdev; + } + + /* + * BAR_2 and BAR_4 (outbound translation) must be in 64-bit PCIe address + * space. + * NOTE: BAR_2 and BAR_4 are not used by this version of driver. + * It may be a good idea to keep them disabled using HW configuration + * to save PCI memory space. + */ + if ((pci_resource_flags(pdev, BAR_2) & IORESOURCE_MEM) && + (pci_resource_flags(pdev, BAR_2) & IORESOURCE_MEM_64)) { + dev_info(&pdev->dev, "Outbound BAR2 is not used but enabled.\n"); + } + + if ((pci_resource_flags(pdev, BAR_4) & IORESOURCE_MEM) && + (pci_resource_flags(pdev, BAR_4) & IORESOURCE_MEM_64)) { + dev_info(&pdev->dev, "Outbound BAR4 is not used but enabled.\n"); + } + + err = pci_request_regions(pdev, DRV_NAME); + if (err) { + dev_err(&pdev->dev, "Cannot obtain PCI resources, " + "aborting.\n"); + goto err_disable_pdev; + } + + pci_set_master(pdev); + + priv->regs = pci_ioremap_bar(pdev, BAR_0); + if (!priv->regs) { + dev_err(&pdev->dev, + "Unable to map device registers space, aborting\n"); + err = -ENOMEM; + goto err_free_res; + } + + priv->odb_base = pci_ioremap_bar(pdev, BAR_1); + if (!priv->odb_base) { + dev_err(&pdev->dev, + "Unable to map outbound doorbells space, aborting\n"); + err = -ENOMEM; + goto err_unmap_bars; + } + + /* Configure DMA attributes. */ + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err) { + dev_info(&pdev->dev, "Unable to set DMA mask\n"); + goto err_unmap_bars; + } + + if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) + dev_info(&pdev->dev, "Unable to set consistent DMA mask\n"); + } else { + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); + if (err) + dev_info(&pdev->dev, "Unable to set consistent DMA mask\n"); + } + + BUG_ON(!pci_is_pcie(pdev)); + + /* Clear "no snoop" and "relaxed ordering" bits, use default MRRS. */ + pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL, + PCI_EXP_DEVCTL_READRQ | PCI_EXP_DEVCTL_RELAX_EN | + PCI_EXP_DEVCTL_NOSNOOP_EN, + PCI_EXP_DEVCTL_READRQ_512B); + + /* Adjust PCIe completion timeout. */ + pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL2, 0xf, 0x2); + + /* + * FIXUP: correct offsets of MSI-X tables in the MSI-X Capability Block + */ + pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0x01); + pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXTBL, + TSI721_MSIXTBL_OFFSET); + pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXPBA, + TSI721_MSIXPBA_OFFSET); + pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0); + /* End of FIXUP */ + + tsi721_disable_ints(priv); + + tsi721_init_pc2sr_mapping(priv); + tsi721_init_sr2pc_mapping(priv); + + if (tsi721_bdma_maint_init(priv)) { + dev_err(&pdev->dev, "BDMA initialization failed, aborting\n"); + err = -ENOMEM; + goto err_unmap_bars; + } + + err = tsi721_doorbell_init(priv); + if (err) + goto err_free_bdma; + + tsi721_port_write_init(priv); + + err = tsi721_messages_init(priv); + if (err) + goto err_free_consistent; + + err = tsi721_setup_mport(priv); + if (err) + goto err_free_consistent; + + return 0; + +err_free_consistent: + tsi721_doorbell_free(priv); +err_free_bdma: + tsi721_bdma_maint_free(priv); +err_unmap_bars: + if (priv->regs) + iounmap(priv->regs); + if (priv->odb_base) + iounmap(priv->odb_base); +err_free_res: + pci_release_regions(pdev); + pci_clear_master(pdev); +err_disable_pdev: + pci_disable_device(pdev); +err_clean: + kfree(priv); +err_exit: + return err; +} + +static const struct pci_device_id tsi721_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_IDT, PCI_DEVICE_ID_TSI721) }, + { 0, } /* terminate list */ +}; + +MODULE_DEVICE_TABLE(pci, tsi721_pci_tbl); + +static struct pci_driver tsi721_driver = { + .name = "tsi721", + .id_table = tsi721_pci_tbl, + .probe = tsi721_probe, +}; + +static int __init tsi721_init(void) +{ + return pci_register_driver(&tsi721_driver); +} + +device_initcall(tsi721_init); + +MODULE_DESCRIPTION("IDT Tsi721 PCIExpress-to-SRIO bridge driver"); +MODULE_AUTHOR("Integrated Device Technology, Inc."); +MODULE_LICENSE("GPL"); |