diff options
Diffstat (limited to 'kernel/drivers/power/ab8500_btemp.c')
| -rw-r--r-- | kernel/drivers/power/ab8500_btemp.c | 1217 |
1 files changed, 1217 insertions, 0 deletions
diff --git a/kernel/drivers/power/ab8500_btemp.c b/kernel/drivers/power/ab8500_btemp.c new file mode 100644 index 000000000..8f8044e1a --- /dev/null +++ b/kernel/drivers/power/ab8500_btemp.c @@ -0,0 +1,1217 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * + * Battery temperature driver for AB8500 + * + * License Terms: GNU General Public License v2 + * Author: + * Johan Palsson <johan.palsson@stericsson.com> + * Karl Komierowski <karl.komierowski@stericsson.com> + * Arun R Murthy <arun.murthy@stericsson.com> + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/completion.h> +#include <linux/workqueue.h> +#include <linux/jiffies.h> +#include <linux/of.h> +#include <linux/mfd/core.h> +#include <linux/mfd/abx500.h> +#include <linux/mfd/abx500/ab8500.h> +#include <linux/mfd/abx500/ab8500-bm.h> +#include <linux/mfd/abx500/ab8500-gpadc.h> + +#define VTVOUT_V 1800 + +#define BTEMP_THERMAL_LOW_LIMIT -10 +#define BTEMP_THERMAL_MED_LIMIT 0 +#define BTEMP_THERMAL_HIGH_LIMIT_52 52 +#define BTEMP_THERMAL_HIGH_LIMIT_57 57 +#define BTEMP_THERMAL_HIGH_LIMIT_62 62 + +#define BTEMP_BATCTRL_CURR_SRC_7UA 7 +#define BTEMP_BATCTRL_CURR_SRC_20UA 20 + +#define BTEMP_BATCTRL_CURR_SRC_16UA 16 +#define BTEMP_BATCTRL_CURR_SRC_18UA 18 + +#define BTEMP_BATCTRL_CURR_SRC_60UA 60 +#define BTEMP_BATCTRL_CURR_SRC_120UA 120 + +/** + * struct ab8500_btemp_interrupts - ab8500 interrupts + * @name: name of the interrupt + * @isr function pointer to the isr + */ +struct ab8500_btemp_interrupts { + char *name; + irqreturn_t (*isr)(int irq, void *data); +}; + +struct ab8500_btemp_events { + bool batt_rem; + bool btemp_high; + bool btemp_medhigh; + bool btemp_lowmed; + bool btemp_low; + bool ac_conn; + bool usb_conn; +}; + +struct ab8500_btemp_ranges { + int btemp_high_limit; + int btemp_med_limit; + int btemp_low_limit; +}; + +/** + * struct ab8500_btemp - ab8500 BTEMP device information + * @dev: Pointer to the structure device + * @node: List of AB8500 BTEMPs, hence prepared for reentrance + * @curr_source: What current source we use, in uA + * @bat_temp: Dispatched battery temperature in degree Celcius + * @prev_bat_temp Last measured battery temperature in degree Celcius + * @parent: Pointer to the struct ab8500 + * @gpadc: Pointer to the struct gpadc + * @fg: Pointer to the struct fg + * @bm: Platform specific battery management information + * @btemp_psy: Structure for BTEMP specific battery properties + * @events: Structure for information about events triggered + * @btemp_ranges: Battery temperature range structure + * @btemp_wq: Work queue for measuring the temperature periodically + * @btemp_periodic_work: Work for measuring the temperature periodically + * @initialized: True if battery id read. + */ +struct ab8500_btemp { + struct device *dev; + struct list_head node; + int curr_source; + int bat_temp; + int prev_bat_temp; + struct ab8500 *parent; + struct ab8500_gpadc *gpadc; + struct ab8500_fg *fg; + struct abx500_bm_data *bm; + struct power_supply *btemp_psy; + struct ab8500_btemp_events events; + struct ab8500_btemp_ranges btemp_ranges; + struct workqueue_struct *btemp_wq; + struct delayed_work btemp_periodic_work; + bool initialized; +}; + +/* BTEMP power supply properties */ +static enum power_supply_property ab8500_btemp_props[] = { + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_TEMP, +}; + +static LIST_HEAD(ab8500_btemp_list); + +/** + * ab8500_btemp_get() - returns a reference to the primary AB8500 BTEMP + * (i.e. the first BTEMP in the instance list) + */ +struct ab8500_btemp *ab8500_btemp_get(void) +{ + struct ab8500_btemp *btemp; + btemp = list_first_entry(&ab8500_btemp_list, struct ab8500_btemp, node); + + return btemp; +} +EXPORT_SYMBOL(ab8500_btemp_get); + +/** + * ab8500_btemp_batctrl_volt_to_res() - convert batctrl voltage to resistance + * @di: pointer to the ab8500_btemp structure + * @v_batctrl: measured batctrl voltage + * @inst_curr: measured instant current + * + * This function returns the battery resistance that is + * derived from the BATCTRL voltage. + * Returns value in Ohms. + */ +static int ab8500_btemp_batctrl_volt_to_res(struct ab8500_btemp *di, + int v_batctrl, int inst_curr) +{ + int rbs; + + if (is_ab8500_1p1_or_earlier(di->parent)) { + /* + * For ABB cut1.0 and 1.1 BAT_CTRL is internally + * connected to 1.8V through a 450k resistor + */ + return (450000 * (v_batctrl)) / (1800 - v_batctrl); + } + + if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL) { + /* + * If the battery has internal NTC, we use the current + * source to calculate the resistance. + */ + rbs = (v_batctrl * 1000 + - di->bm->gnd_lift_resistance * inst_curr) + / di->curr_source; + } else { + /* + * BAT_CTRL is internally + * connected to 1.8V through a 80k resistor + */ + rbs = (80000 * (v_batctrl)) / (1800 - v_batctrl); + } + + return rbs; +} + +/** + * ab8500_btemp_read_batctrl_voltage() - measure batctrl voltage + * @di: pointer to the ab8500_btemp structure + * + * This function returns the voltage on BATCTRL. Returns value in mV. + */ +static int ab8500_btemp_read_batctrl_voltage(struct ab8500_btemp *di) +{ + int vbtemp; + static int prev; + + vbtemp = ab8500_gpadc_convert(di->gpadc, BAT_CTRL); + if (vbtemp < 0) { + dev_err(di->dev, + "%s gpadc conversion failed, using previous value", + __func__); + return prev; + } + prev = vbtemp; + return vbtemp; +} + +/** + * ab8500_btemp_curr_source_enable() - enable/disable batctrl current source + * @di: pointer to the ab8500_btemp structure + * @enable: enable or disable the current source + * + * Enable or disable the current sources for the BatCtrl AD channel + */ +static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di, + bool enable) +{ + int curr; + int ret = 0; + + /* + * BATCTRL current sources are included on AB8500 cut2.0 + * and future versions + */ + if (is_ab8500_1p1_or_earlier(di->parent)) + return 0; + + /* Only do this for batteries with internal NTC */ + if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) { + + if (is_ab8540(di->parent)) { + if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_60UA) + curr = BAT_CTRL_60U_ENA; + else + curr = BAT_CTRL_120U_ENA; + } else if (is_ab9540(di->parent) || is_ab8505(di->parent)) { + if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_16UA) + curr = BAT_CTRL_16U_ENA; + else + curr = BAT_CTRL_18U_ENA; + } else { + if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_7UA) + curr = BAT_CTRL_7U_ENA; + else + curr = BAT_CTRL_20U_ENA; + } + + dev_dbg(di->dev, "Set BATCTRL %duA\n", di->curr_source); + + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + FORCE_BAT_CTRL_CMP_HIGH, FORCE_BAT_CTRL_CMP_HIGH); + if (ret) { + dev_err(di->dev, "%s failed setting cmp_force\n", + __func__); + return ret; + } + + /* + * We have to wait one 32kHz cycle before enabling + * the current source, since ForceBatCtrlCmpHigh needs + * to be written in a separate cycle + */ + udelay(32); + + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + FORCE_BAT_CTRL_CMP_HIGH | curr); + if (ret) { + dev_err(di->dev, "%s failed enabling current source\n", + __func__); + goto disable_curr_source; + } + } else if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) { + dev_dbg(di->dev, "Disable BATCTRL curr source\n"); + + if (is_ab8540(di->parent)) { + /* Write 0 to the curr bits */ + ret = abx500_mask_and_set_register_interruptible( + di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + BAT_CTRL_60U_ENA | BAT_CTRL_120U_ENA, + ~(BAT_CTRL_60U_ENA | BAT_CTRL_120U_ENA)); + } else if (is_ab9540(di->parent) || is_ab8505(di->parent)) { + /* Write 0 to the curr bits */ + ret = abx500_mask_and_set_register_interruptible( + di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA, + ~(BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA)); + } else { + /* Write 0 to the curr bits */ + ret = abx500_mask_and_set_register_interruptible( + di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA, + ~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA)); + } + + if (ret) { + dev_err(di->dev, "%s failed disabling current source\n", + __func__); + goto disable_curr_source; + } + + /* Enable Pull-Up and comparator */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + BAT_CTRL_PULL_UP_ENA | BAT_CTRL_CMP_ENA, + BAT_CTRL_PULL_UP_ENA | BAT_CTRL_CMP_ENA); + if (ret) { + dev_err(di->dev, "%s failed enabling PU and comp\n", + __func__); + goto enable_pu_comp; + } + + /* + * We have to wait one 32kHz cycle before disabling + * ForceBatCtrlCmpHigh since this needs to be written + * in a separate cycle + */ + udelay(32); + + /* Disable 'force comparator' */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + FORCE_BAT_CTRL_CMP_HIGH, ~FORCE_BAT_CTRL_CMP_HIGH); + if (ret) { + dev_err(di->dev, "%s failed disabling force comp\n", + __func__); + goto disable_force_comp; + } + } + return ret; + + /* + * We have to try unsetting FORCE_BAT_CTRL_CMP_HIGH one more time + * if we got an error above + */ +disable_curr_source: + if (is_ab8540(di->parent)) { + /* Write 0 to the curr bits */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + BAT_CTRL_60U_ENA | BAT_CTRL_120U_ENA, + ~(BAT_CTRL_60U_ENA | BAT_CTRL_120U_ENA)); + } else if (is_ab9540(di->parent) || is_ab8505(di->parent)) { + /* Write 0 to the curr bits */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA, + ~(BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA)); + } else { + /* Write 0 to the curr bits */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA, + ~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA)); + } + + if (ret) { + dev_err(di->dev, "%s failed disabling current source\n", + __func__); + return ret; + } +enable_pu_comp: + /* Enable Pull-Up and comparator */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + BAT_CTRL_PULL_UP_ENA | BAT_CTRL_CMP_ENA, + BAT_CTRL_PULL_UP_ENA | BAT_CTRL_CMP_ENA); + if (ret) { + dev_err(di->dev, "%s failed enabling PU and comp\n", + __func__); + return ret; + } + +disable_force_comp: + /* + * We have to wait one 32kHz cycle before disabling + * ForceBatCtrlCmpHigh since this needs to be written + * in a separate cycle + */ + udelay(32); + + /* Disable 'force comparator' */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + FORCE_BAT_CTRL_CMP_HIGH, ~FORCE_BAT_CTRL_CMP_HIGH); + if (ret) { + dev_err(di->dev, "%s failed disabling force comp\n", + __func__); + return ret; + } + + return ret; +} + +/** + * ab8500_btemp_get_batctrl_res() - get battery resistance + * @di: pointer to the ab8500_btemp structure + * + * This function returns the battery pack identification resistance. + * Returns value in Ohms. + */ +static int ab8500_btemp_get_batctrl_res(struct ab8500_btemp *di) +{ + int ret; + int batctrl = 0; + int res; + int inst_curr; + int i; + + /* + * BATCTRL current sources are included on AB8500 cut2.0 + * and future versions + */ + ret = ab8500_btemp_curr_source_enable(di, true); + if (ret) { + dev_err(di->dev, "%s curr source enabled failed\n", __func__); + return ret; + } + + if (!di->fg) + di->fg = ab8500_fg_get(); + if (!di->fg) { + dev_err(di->dev, "No fg found\n"); + return -EINVAL; + } + + ret = ab8500_fg_inst_curr_start(di->fg); + + if (ret) { + dev_err(di->dev, "Failed to start current measurement\n"); + return ret; + } + + do { + msleep(20); + } while (!ab8500_fg_inst_curr_started(di->fg)); + + i = 0; + + do { + batctrl += ab8500_btemp_read_batctrl_voltage(di); + i++; + msleep(20); + } while (!ab8500_fg_inst_curr_done(di->fg)); + batctrl /= i; + + ret = ab8500_fg_inst_curr_finalize(di->fg, &inst_curr); + if (ret) { + dev_err(di->dev, "Failed to finalize current measurement\n"); + return ret; + } + + res = ab8500_btemp_batctrl_volt_to_res(di, batctrl, inst_curr); + + ret = ab8500_btemp_curr_source_enable(di, false); + if (ret) { + dev_err(di->dev, "%s curr source disable failed\n", __func__); + return ret; + } + + dev_dbg(di->dev, "%s batctrl: %d res: %d inst_curr: %d samples: %d\n", + __func__, batctrl, res, inst_curr, i); + + return res; +} + +/** + * ab8500_btemp_res_to_temp() - resistance to temperature + * @di: pointer to the ab8500_btemp structure + * @tbl: pointer to the resiatance to temperature table + * @tbl_size: size of the resistance to temperature table + * @res: resistance to calculate the temperature from + * + * This function returns the battery temperature in degrees Celcius + * based on the NTC resistance. + */ +static int ab8500_btemp_res_to_temp(struct ab8500_btemp *di, + const struct abx500_res_to_temp *tbl, int tbl_size, int res) +{ + int i, temp; + /* + * Calculate the formula for the straight line + * Simple interpolation if we are within + * the resistance table limits, extrapolate + * if resistance is outside the limits. + */ + if (res > tbl[0].resist) + i = 0; + else if (res <= tbl[tbl_size - 1].resist) + i = tbl_size - 2; + else { + i = 0; + while (!(res <= tbl[i].resist && + res > tbl[i + 1].resist)) + i++; + } + + temp = tbl[i].temp + ((tbl[i + 1].temp - tbl[i].temp) * + (res - tbl[i].resist)) / (tbl[i + 1].resist - tbl[i].resist); + return temp; +} + +/** + * ab8500_btemp_measure_temp() - measure battery temperature + * @di: pointer to the ab8500_btemp structure + * + * Returns battery temperature (on success) else the previous temperature + */ +static int ab8500_btemp_measure_temp(struct ab8500_btemp *di) +{ + int temp; + static int prev; + int rbat, rntc, vntc; + u8 id; + + id = di->bm->batt_id; + + if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && + id != BATTERY_UNKNOWN) { + + rbat = ab8500_btemp_get_batctrl_res(di); + if (rbat < 0) { + dev_err(di->dev, "%s get batctrl res failed\n", + __func__); + /* + * Return out-of-range temperature so that + * charging is stopped + */ + return BTEMP_THERMAL_LOW_LIMIT; + } + + temp = ab8500_btemp_res_to_temp(di, + di->bm->bat_type[id].r_to_t_tbl, + di->bm->bat_type[id].n_temp_tbl_elements, rbat); + } else { + vntc = ab8500_gpadc_convert(di->gpadc, BTEMP_BALL); + if (vntc < 0) { + dev_err(di->dev, + "%s gpadc conversion failed," + " using previous value\n", __func__); + return prev; + } + /* + * The PCB NTC is sourced from VTVOUT via a 230kOhm + * resistor. + */ + rntc = 230000 * vntc / (VTVOUT_V - vntc); + + temp = ab8500_btemp_res_to_temp(di, + di->bm->bat_type[id].r_to_t_tbl, + di->bm->bat_type[id].n_temp_tbl_elements, rntc); + prev = temp; + } + dev_dbg(di->dev, "Battery temperature is %d\n", temp); + return temp; +} + +/** + * ab8500_btemp_id() - Identify the connected battery + * @di: pointer to the ab8500_btemp structure + * + * This function will try to identify the battery by reading the ID + * resistor. Some brands use a combined ID resistor with a NTC resistor to + * both be able to identify and to read the temperature of it. + */ +static int ab8500_btemp_id(struct ab8500_btemp *di) +{ + int res; + u8 i; + if (is_ab8540(di->parent)) + di->curr_source = BTEMP_BATCTRL_CURR_SRC_60UA; + else if (is_ab9540(di->parent) || is_ab8505(di->parent)) + di->curr_source = BTEMP_BATCTRL_CURR_SRC_16UA; + else + di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA; + + di->bm->batt_id = BATTERY_UNKNOWN; + + res = ab8500_btemp_get_batctrl_res(di); + if (res < 0) { + dev_err(di->dev, "%s get batctrl res failed\n", __func__); + return -ENXIO; + } + + /* BATTERY_UNKNOWN is defined on position 0, skip it! */ + for (i = BATTERY_UNKNOWN + 1; i < di->bm->n_btypes; i++) { + if ((res <= di->bm->bat_type[i].resis_high) && + (res >= di->bm->bat_type[i].resis_low)) { + dev_dbg(di->dev, "Battery detected on %s" + " low %d < res %d < high: %d" + " index: %d\n", + di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL ? + "BATCTRL" : "BATTEMP", + di->bm->bat_type[i].resis_low, res, + di->bm->bat_type[i].resis_high, i); + + di->bm->batt_id = i; + break; + } + } + + if (di->bm->batt_id == BATTERY_UNKNOWN) { + dev_warn(di->dev, "Battery identified as unknown" + ", resistance %d Ohm\n", res); + return -ENXIO; + } + + /* + * We only have to change current source if the + * detected type is Type 1. + */ + if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && + di->bm->batt_id == 1) { + if (is_ab8540(di->parent)) { + dev_dbg(di->dev, + "Set BATCTRL current source to 60uA\n"); + di->curr_source = BTEMP_BATCTRL_CURR_SRC_60UA; + } else if (is_ab9540(di->parent) || is_ab8505(di->parent)) { + dev_dbg(di->dev, + "Set BATCTRL current source to 16uA\n"); + di->curr_source = BTEMP_BATCTRL_CURR_SRC_16UA; + } else { + dev_dbg(di->dev, "Set BATCTRL current source to 20uA\n"); + di->curr_source = BTEMP_BATCTRL_CURR_SRC_20UA; + } + } + + return di->bm->batt_id; +} + +/** + * ab8500_btemp_periodic_work() - Measuring the temperature periodically + * @work: pointer to the work_struct structure + * + * Work function for measuring the temperature periodically + */ +static void ab8500_btemp_periodic_work(struct work_struct *work) +{ + int interval; + int bat_temp; + struct ab8500_btemp *di = container_of(work, + struct ab8500_btemp, btemp_periodic_work.work); + + if (!di->initialized) { + /* Identify the battery */ + if (ab8500_btemp_id(di) < 0) + dev_warn(di->dev, "failed to identify the battery\n"); + } + + bat_temp = ab8500_btemp_measure_temp(di); + /* + * Filter battery temperature. + * Allow direct updates on temperature only if two samples result in + * same temperature. Else only allow 1 degree change from previous + * reported value in the direction of the new measurement. + */ + if ((bat_temp == di->prev_bat_temp) || !di->initialized) { + if ((di->bat_temp != di->prev_bat_temp) || !di->initialized) { + di->initialized = true; + di->bat_temp = bat_temp; + power_supply_changed(di->btemp_psy); + } + } else if (bat_temp < di->prev_bat_temp) { + di->bat_temp--; + power_supply_changed(di->btemp_psy); + } else if (bat_temp > di->prev_bat_temp) { + di->bat_temp++; + power_supply_changed(di->btemp_psy); + } + di->prev_bat_temp = bat_temp; + + if (di->events.ac_conn || di->events.usb_conn) + interval = di->bm->temp_interval_chg; + else + interval = di->bm->temp_interval_nochg; + + /* Schedule a new measurement */ + queue_delayed_work(di->btemp_wq, + &di->btemp_periodic_work, + round_jiffies(interval * HZ)); +} + +/** + * ab8500_btemp_batctrlindb_handler() - battery removal detected + * @irq: interrupt number + * @_di: void pointer that has to address of ab8500_btemp + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_btemp_batctrlindb_handler(int irq, void *_di) +{ + struct ab8500_btemp *di = _di; + dev_err(di->dev, "Battery removal detected!\n"); + + di->events.batt_rem = true; + power_supply_changed(di->btemp_psy); + + return IRQ_HANDLED; +} + +/** + * ab8500_btemp_templow_handler() - battery temp lower than 10 degrees + * @irq: interrupt number + * @_di: void pointer that has to address of ab8500_btemp + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_btemp_templow_handler(int irq, void *_di) +{ + struct ab8500_btemp *di = _di; + + if (is_ab8500_3p3_or_earlier(di->parent)) { + dev_dbg(di->dev, "Ignore false btemp low irq" + " for ABB cut 1.0, 1.1, 2.0 and 3.3\n"); + } else { + dev_crit(di->dev, "Battery temperature lower than -10deg c\n"); + + di->events.btemp_low = true; + di->events.btemp_high = false; + di->events.btemp_medhigh = false; + di->events.btemp_lowmed = false; + power_supply_changed(di->btemp_psy); + } + + return IRQ_HANDLED; +} + +/** + * ab8500_btemp_temphigh_handler() - battery temp higher than max temp + * @irq: interrupt number + * @_di: void pointer that has to address of ab8500_btemp + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_btemp_temphigh_handler(int irq, void *_di) +{ + struct ab8500_btemp *di = _di; + + dev_crit(di->dev, "Battery temperature is higher than MAX temp\n"); + + di->events.btemp_high = true; + di->events.btemp_medhigh = false; + di->events.btemp_lowmed = false; + di->events.btemp_low = false; + power_supply_changed(di->btemp_psy); + + return IRQ_HANDLED; +} + +/** + * ab8500_btemp_lowmed_handler() - battery temp between low and medium + * @irq: interrupt number + * @_di: void pointer that has to address of ab8500_btemp + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_btemp_lowmed_handler(int irq, void *_di) +{ + struct ab8500_btemp *di = _di; + + dev_dbg(di->dev, "Battery temperature is between low and medium\n"); + + di->events.btemp_lowmed = true; + di->events.btemp_medhigh = false; + di->events.btemp_high = false; + di->events.btemp_low = false; + power_supply_changed(di->btemp_psy); + + return IRQ_HANDLED; +} + +/** + * ab8500_btemp_medhigh_handler() - battery temp between medium and high + * @irq: interrupt number + * @_di: void pointer that has to address of ab8500_btemp + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_btemp_medhigh_handler(int irq, void *_di) +{ + struct ab8500_btemp *di = _di; + + dev_dbg(di->dev, "Battery temperature is between medium and high\n"); + + di->events.btemp_medhigh = true; + di->events.btemp_lowmed = false; + di->events.btemp_high = false; + di->events.btemp_low = false; + power_supply_changed(di->btemp_psy); + + return IRQ_HANDLED; +} + +/** + * ab8500_btemp_periodic() - Periodic temperature measurements + * @di: pointer to the ab8500_btemp structure + * @enable: enable or disable periodic temperature measurements + * + * Starts of stops periodic temperature measurements. Periodic measurements + * should only be done when a charger is connected. + */ +static void ab8500_btemp_periodic(struct ab8500_btemp *di, + bool enable) +{ + dev_dbg(di->dev, "Enable periodic temperature measurements: %d\n", + enable); + /* + * Make sure a new measurement is done directly by cancelling + * any pending work + */ + cancel_delayed_work_sync(&di->btemp_periodic_work); + + if (enable) + queue_delayed_work(di->btemp_wq, &di->btemp_periodic_work, 0); +} + +/** + * ab8500_btemp_get_temp() - get battery temperature + * @di: pointer to the ab8500_btemp structure + * + * Returns battery temperature + */ +int ab8500_btemp_get_temp(struct ab8500_btemp *di) +{ + int temp = 0; + + /* + * The BTEMP events are not reliabe on AB8500 cut3.3 + * and prior versions + */ + if (is_ab8500_3p3_or_earlier(di->parent)) { + temp = di->bat_temp * 10; + } else { + if (di->events.btemp_low) { + if (temp > di->btemp_ranges.btemp_low_limit) + temp = di->btemp_ranges.btemp_low_limit * 10; + else + temp = di->bat_temp * 10; + } else if (di->events.btemp_high) { + if (temp < di->btemp_ranges.btemp_high_limit) + temp = di->btemp_ranges.btemp_high_limit * 10; + else + temp = di->bat_temp * 10; + } else if (di->events.btemp_lowmed) { + if (temp > di->btemp_ranges.btemp_med_limit) + temp = di->btemp_ranges.btemp_med_limit * 10; + else + temp = di->bat_temp * 10; + } else if (di->events.btemp_medhigh) { + if (temp < di->btemp_ranges.btemp_med_limit) + temp = di->btemp_ranges.btemp_med_limit * 10; + else + temp = di->bat_temp * 10; + } else + temp = di->bat_temp * 10; + } + return temp; +} +EXPORT_SYMBOL(ab8500_btemp_get_temp); + +/** + * ab8500_btemp_get_batctrl_temp() - get the temperature + * @btemp: pointer to the btemp structure + * + * Returns the batctrl temperature in millidegrees + */ +int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp) +{ + return btemp->bat_temp * 1000; +} +EXPORT_SYMBOL(ab8500_btemp_get_batctrl_temp); + +/** + * ab8500_btemp_get_property() - get the btemp properties + * @psy: pointer to the power_supply structure + * @psp: pointer to the power_supply_property structure + * @val: pointer to the power_supply_propval union + * + * This function gets called when an application tries to get the btemp + * properties by reading the sysfs files. + * online: presence of the battery + * present: presence of the battery + * technology: battery technology + * temp: battery temperature + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_btemp_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct ab8500_btemp *di = power_supply_get_drvdata(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_PRESENT: + case POWER_SUPPLY_PROP_ONLINE: + if (di->events.batt_rem) + val->intval = 0; + else + val->intval = 1; + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = di->bm->bat_type[di->bm->batt_id].name; + break; + case POWER_SUPPLY_PROP_TEMP: + val->intval = ab8500_btemp_get_temp(di); + break; + default: + return -EINVAL; + } + return 0; +} + +static int ab8500_btemp_get_ext_psy_data(struct device *dev, void *data) +{ + struct power_supply *psy; + struct power_supply *ext; + struct ab8500_btemp *di; + union power_supply_propval ret; + int i, j; + bool psy_found = false; + + psy = (struct power_supply *)data; + ext = dev_get_drvdata(dev); + di = power_supply_get_drvdata(psy); + + /* + * For all psy where the name of your driver + * appears in any supplied_to + */ + for (i = 0; i < ext->num_supplicants; i++) { + if (!strcmp(ext->supplied_to[i], psy->desc->name)) + psy_found = true; + } + + if (!psy_found) + return 0; + + /* Go through all properties for the psy */ + for (j = 0; j < ext->desc->num_properties; j++) { + enum power_supply_property prop; + prop = ext->desc->properties[j]; + + if (power_supply_get_property(ext, prop, &ret)) + continue; + + switch (prop) { + case POWER_SUPPLY_PROP_PRESENT: + switch (ext->desc->type) { + case POWER_SUPPLY_TYPE_MAINS: + /* AC disconnected */ + if (!ret.intval && di->events.ac_conn) { + di->events.ac_conn = false; + } + /* AC connected */ + else if (ret.intval && !di->events.ac_conn) { + di->events.ac_conn = true; + if (!di->events.usb_conn) + ab8500_btemp_periodic(di, true); + } + break; + case POWER_SUPPLY_TYPE_USB: + /* USB disconnected */ + if (!ret.intval && di->events.usb_conn) { + di->events.usb_conn = false; + } + /* USB connected */ + else if (ret.intval && !di->events.usb_conn) { + di->events.usb_conn = true; + if (!di->events.ac_conn) + ab8500_btemp_periodic(di, true); + } + break; + default: + break; + } + break; + default: + break; + } + } + return 0; +} + +/** + * ab8500_btemp_external_power_changed() - callback for power supply changes + * @psy: pointer to the structure power_supply + * + * This function is pointing to the function pointer external_power_changed + * of the structure power_supply. + * This function gets executed when there is a change in the external power + * supply to the btemp. + */ +static void ab8500_btemp_external_power_changed(struct power_supply *psy) +{ + struct ab8500_btemp *di = power_supply_get_drvdata(psy); + + class_for_each_device(power_supply_class, NULL, + di->btemp_psy, ab8500_btemp_get_ext_psy_data); +} + +/* ab8500 btemp driver interrupts and their respective isr */ +static struct ab8500_btemp_interrupts ab8500_btemp_irq[] = { + {"BAT_CTRL_INDB", ab8500_btemp_batctrlindb_handler}, + {"BTEMP_LOW", ab8500_btemp_templow_handler}, + {"BTEMP_HIGH", ab8500_btemp_temphigh_handler}, + {"BTEMP_LOW_MEDIUM", ab8500_btemp_lowmed_handler}, + {"BTEMP_MEDIUM_HIGH", ab8500_btemp_medhigh_handler}, +}; + +#if defined(CONFIG_PM) +static int ab8500_btemp_resume(struct platform_device *pdev) +{ + struct ab8500_btemp *di = platform_get_drvdata(pdev); + + ab8500_btemp_periodic(di, true); + + return 0; +} + +static int ab8500_btemp_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct ab8500_btemp *di = platform_get_drvdata(pdev); + + ab8500_btemp_periodic(di, false); + + return 0; +} +#else +#define ab8500_btemp_suspend NULL +#define ab8500_btemp_resume NULL +#endif + +static int ab8500_btemp_remove(struct platform_device *pdev) +{ + struct ab8500_btemp *di = platform_get_drvdata(pdev); + int i, irq; + + /* Disable interrupts */ + for (i = 0; i < ARRAY_SIZE(ab8500_btemp_irq); i++) { + irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name); + free_irq(irq, di); + } + + /* Delete the work queue */ + destroy_workqueue(di->btemp_wq); + + flush_scheduled_work(); + power_supply_unregister(di->btemp_psy); + + return 0; +} + +static char *supply_interface[] = { + "ab8500_chargalg", + "ab8500_fg", +}; + +static const struct power_supply_desc ab8500_btemp_desc = { + .name = "ab8500_btemp", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = ab8500_btemp_props, + .num_properties = ARRAY_SIZE(ab8500_btemp_props), + .get_property = ab8500_btemp_get_property, + .external_power_changed = ab8500_btemp_external_power_changed, +}; + +static int ab8500_btemp_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct abx500_bm_data *plat = pdev->dev.platform_data; + struct power_supply_config psy_cfg = {}; + struct ab8500_btemp *di; + int irq, i, ret = 0; + u8 val; + + di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL); + if (!di) { + dev_err(&pdev->dev, "%s no mem for ab8500_btemp\n", __func__); + return -ENOMEM; + } + + if (!plat) { + dev_err(&pdev->dev, "no battery management data supplied\n"); + return -EINVAL; + } + di->bm = plat; + + if (np) { + ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm); + if (ret) { + dev_err(&pdev->dev, "failed to get battery information\n"); + return ret; + } + } + + /* get parent data */ + di->dev = &pdev->dev; + di->parent = dev_get_drvdata(pdev->dev.parent); + di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + + di->initialized = false; + + psy_cfg.supplied_to = supply_interface; + psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface); + psy_cfg.drv_data = di; + + /* Create a work queue for the btemp */ + di->btemp_wq = + create_singlethread_workqueue("ab8500_btemp_wq"); + if (di->btemp_wq == NULL) { + dev_err(di->dev, "failed to create work queue\n"); + return -ENOMEM; + } + + /* Init work for measuring temperature periodically */ + INIT_DEFERRABLE_WORK(&di->btemp_periodic_work, + ab8500_btemp_periodic_work); + + /* Set BTEMP thermal limits. Low and Med are fixed */ + di->btemp_ranges.btemp_low_limit = BTEMP_THERMAL_LOW_LIMIT; + di->btemp_ranges.btemp_med_limit = BTEMP_THERMAL_MED_LIMIT; + + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_BTEMP_HIGH_TH, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + goto free_btemp_wq; + } + switch (val) { + case BTEMP_HIGH_TH_57_0: + case BTEMP_HIGH_TH_57_1: + di->btemp_ranges.btemp_high_limit = + BTEMP_THERMAL_HIGH_LIMIT_57; + break; + case BTEMP_HIGH_TH_52: + di->btemp_ranges.btemp_high_limit = + BTEMP_THERMAL_HIGH_LIMIT_52; + break; + case BTEMP_HIGH_TH_62: + di->btemp_ranges.btemp_high_limit = + BTEMP_THERMAL_HIGH_LIMIT_62; + break; + } + + /* Register BTEMP power supply class */ + di->btemp_psy = power_supply_register(di->dev, &ab8500_btemp_desc, + &psy_cfg); + if (IS_ERR(di->btemp_psy)) { + dev_err(di->dev, "failed to register BTEMP psy\n"); + ret = PTR_ERR(di->btemp_psy); + goto free_btemp_wq; + } + + /* Register interrupts */ + for (i = 0; i < ARRAY_SIZE(ab8500_btemp_irq); i++) { + irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name); + ret = request_threaded_irq(irq, NULL, ab8500_btemp_irq[i].isr, + IRQF_SHARED | IRQF_NO_SUSPEND, + ab8500_btemp_irq[i].name, di); + + if (ret) { + dev_err(di->dev, "failed to request %s IRQ %d: %d\n" + , ab8500_btemp_irq[i].name, irq, ret); + goto free_irq; + } + dev_dbg(di->dev, "Requested %s IRQ %d: %d\n", + ab8500_btemp_irq[i].name, irq, ret); + } + + platform_set_drvdata(pdev, di); + + /* Kick off periodic temperature measurements */ + ab8500_btemp_periodic(di, true); + list_add_tail(&di->node, &ab8500_btemp_list); + + return ret; + +free_irq: + power_supply_unregister(di->btemp_psy); + + /* We also have to free all successfully registered irqs */ + for (i = i - 1; i >= 0; i--) { + irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name); + free_irq(irq, di); + } +free_btemp_wq: + destroy_workqueue(di->btemp_wq); + return ret; +} + +static const struct of_device_id ab8500_btemp_match[] = { + { .compatible = "stericsson,ab8500-btemp", }, + { }, +}; + +static struct platform_driver ab8500_btemp_driver = { + .probe = ab8500_btemp_probe, + .remove = ab8500_btemp_remove, + .suspend = ab8500_btemp_suspend, + .resume = ab8500_btemp_resume, + .driver = { + .name = "ab8500-btemp", + .of_match_table = ab8500_btemp_match, + }, +}; + +static int __init ab8500_btemp_init(void) +{ + return platform_driver_register(&ab8500_btemp_driver); +} + +static void __exit ab8500_btemp_exit(void) +{ + platform_driver_unregister(&ab8500_btemp_driver); +} + +device_initcall(ab8500_btemp_init); +module_exit(ab8500_btemp_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Johan Palsson, Karl Komierowski, Arun R Murthy"); +MODULE_ALIAS("platform:ab8500-btemp"); +MODULE_DESCRIPTION("AB8500 battery temperature driver"); |