summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/net/ethernet/marvell/sky2.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/net/ethernet/marvell/sky2.c')
-rw-r--r--kernel/drivers/net/ethernet/marvell/sky2.c5245
1 files changed, 5245 insertions, 0 deletions
diff --git a/kernel/drivers/net/ethernet/marvell/sky2.c b/kernel/drivers/net/ethernet/marvell/sky2.c
new file mode 100644
index 000000000..d9f449883
--- /dev/null
+++ b/kernel/drivers/net/ethernet/marvell/sky2.c
@@ -0,0 +1,5245 @@
+/*
+ * New driver for Marvell Yukon 2 chipset.
+ * Based on earlier sk98lin, and skge driver.
+ *
+ * This driver intentionally does not support all the features
+ * of the original driver such as link fail-over and link management because
+ * those should be done at higher levels.
+ *
+ * Copyright (C) 2005 Stephen Hemminger <shemminger@osdl.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/crc32.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/dma-mapping.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/ip.h>
+#include <linux/slab.h>
+#include <net/ip.h>
+#include <linux/tcp.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/if_vlan.h>
+#include <linux/prefetch.h>
+#include <linux/debugfs.h>
+#include <linux/mii.h>
+#include <linux/of_device.h>
+#include <linux/of_net.h>
+
+#include <asm/irq.h>
+
+#include "sky2.h"
+
+#define DRV_NAME "sky2"
+#define DRV_VERSION "1.30"
+
+/*
+ * The Yukon II chipset takes 64 bit command blocks (called list elements)
+ * that are organized into three (receive, transmit, status) different rings
+ * similar to Tigon3.
+ */
+
+#define RX_LE_SIZE 1024
+#define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le))
+#define RX_MAX_PENDING (RX_LE_SIZE/6 - 2)
+#define RX_DEF_PENDING RX_MAX_PENDING
+
+/* This is the worst case number of transmit list elements for a single skb:
+ VLAN:GSO + CKSUM + Data + skb_frags * DMA */
+#define MAX_SKB_TX_LE (2 + (sizeof(dma_addr_t)/sizeof(u32))*(MAX_SKB_FRAGS+1))
+#define TX_MIN_PENDING (MAX_SKB_TX_LE+1)
+#define TX_MAX_PENDING 1024
+#define TX_DEF_PENDING 63
+
+#define TX_WATCHDOG (5 * HZ)
+#define NAPI_WEIGHT 64
+#define PHY_RETRIES 1000
+
+#define SKY2_EEPROM_MAGIC 0x9955aabb
+
+#define RING_NEXT(x, s) (((x)+1) & ((s)-1))
+
+static const u32 default_msg =
+ NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK
+ | NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR
+ | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN;
+
+static int debug = -1; /* defaults above */
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
+static int copybreak __read_mostly = 128;
+module_param(copybreak, int, 0);
+MODULE_PARM_DESC(copybreak, "Receive copy threshold");
+
+static int disable_msi = 0;
+module_param(disable_msi, int, 0);
+MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
+
+static int legacy_pme = 0;
+module_param(legacy_pme, int, 0);
+MODULE_PARM_DESC(legacy_pme, "Legacy power management");
+
+static const struct pci_device_id sky2_id_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */
+ { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
+ { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E01) }, /* SK-9E21M */
+ { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */
+ { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4001) }, /* DGE-550SX */
+ { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B02) }, /* DGE-560SX */
+ { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B03) }, /* DGE-550T */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) }, /* 88E8021 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) }, /* 88E8022 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) }, /* 88E8061 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4343) }, /* 88E8062 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4344) }, /* 88E8021 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4345) }, /* 88E8022 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4346) }, /* 88E8061 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4347) }, /* 88E8062 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) }, /* 88E8035 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) }, /* 88E8036 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, /* 88E8038 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4355) }, /* 88E8040T */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4357) }, /* 88E8042 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, /* 88E8052 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, /* 88E8053 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, /* 88E8055 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, /* 88E8056 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4365) }, /* 88E8070 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, /* 88EC036 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, /* 88EC032 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, /* 88EC042 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436C) }, /* 88E8072 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436D) }, /* 88E8055 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4370) }, /* 88E8075 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4380) }, /* 88E8057 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4381) }, /* 88E8059 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4382) }, /* 88E8079 */
+ { 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, sky2_id_table);
+
+/* Avoid conditionals by using array */
+static const unsigned txqaddr[] = { Q_XA1, Q_XA2 };
+static const unsigned rxqaddr[] = { Q_R1, Q_R2 };
+static const u32 portirq_msk[] = { Y2_IS_PORT_1, Y2_IS_PORT_2 };
+
+static void sky2_set_multicast(struct net_device *dev);
+static irqreturn_t sky2_intr(int irq, void *dev_id);
+
+/* Access to PHY via serial interconnect */
+static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val)
+{
+ int i;
+
+ gma_write16(hw, port, GM_SMI_DATA, val);
+ gma_write16(hw, port, GM_SMI_CTRL,
+ GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg));
+
+ for (i = 0; i < PHY_RETRIES; i++) {
+ u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
+ if (ctrl == 0xffff)
+ goto io_error;
+
+ if (!(ctrl & GM_SMI_CT_BUSY))
+ return 0;
+
+ udelay(10);
+ }
+
+ dev_warn(&hw->pdev->dev, "%s: phy write timeout\n", hw->dev[port]->name);
+ return -ETIMEDOUT;
+
+io_error:
+ dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
+ return -EIO;
+}
+
+static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val)
+{
+ int i;
+
+ gma_write16(hw, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV)
+ | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD);
+
+ for (i = 0; i < PHY_RETRIES; i++) {
+ u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
+ if (ctrl == 0xffff)
+ goto io_error;
+
+ if (ctrl & GM_SMI_CT_RD_VAL) {
+ *val = gma_read16(hw, port, GM_SMI_DATA);
+ return 0;
+ }
+
+ udelay(10);
+ }
+
+ dev_warn(&hw->pdev->dev, "%s: phy read timeout\n", hw->dev[port]->name);
+ return -ETIMEDOUT;
+io_error:
+ dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
+ return -EIO;
+}
+
+static inline u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
+{
+ u16 v;
+ __gm_phy_read(hw, port, reg, &v);
+ return v;
+}
+
+
+static void sky2_power_on(struct sky2_hw *hw)
+{
+ /* switch power to VCC (WA for VAUX problem) */
+ sky2_write8(hw, B0_POWER_CTRL,
+ PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
+
+ /* disable Core Clock Division, */
+ sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS);
+
+ if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > CHIP_REV_YU_XL_A1)
+ /* enable bits are inverted */
+ sky2_write8(hw, B2_Y2_CLK_GATE,
+ Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
+ Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
+ Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
+ else
+ sky2_write8(hw, B2_Y2_CLK_GATE, 0);
+
+ if (hw->flags & SKY2_HW_ADV_POWER_CTL) {
+ u32 reg;
+
+ sky2_pci_write32(hw, PCI_DEV_REG3, 0);
+
+ reg = sky2_pci_read32(hw, PCI_DEV_REG4);
+ /* set all bits to 0 except bits 15..12 and 8 */
+ reg &= P_ASPM_CONTROL_MSK;
+ sky2_pci_write32(hw, PCI_DEV_REG4, reg);
+
+ reg = sky2_pci_read32(hw, PCI_DEV_REG5);
+ /* set all bits to 0 except bits 28 & 27 */
+ reg &= P_CTL_TIM_VMAIN_AV_MSK;
+ sky2_pci_write32(hw, PCI_DEV_REG5, reg);
+
+ sky2_pci_write32(hw, PCI_CFG_REG_1, 0);
+
+ sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON);
+
+ /* Enable workaround for dev 4.107 on Yukon-Ultra & Extreme */
+ reg = sky2_read32(hw, B2_GP_IO);
+ reg |= GLB_GPIO_STAT_RACE_DIS;
+ sky2_write32(hw, B2_GP_IO, reg);
+
+ sky2_read32(hw, B2_GP_IO);
+ }
+
+ /* Turn on "driver loaded" LED */
+ sky2_write16(hw, B0_CTST, Y2_LED_STAT_ON);
+}
+
+static void sky2_power_aux(struct sky2_hw *hw)
+{
+ if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > CHIP_REV_YU_XL_A1)
+ sky2_write8(hw, B2_Y2_CLK_GATE, 0);
+ else
+ /* enable bits are inverted */
+ sky2_write8(hw, B2_Y2_CLK_GATE,
+ Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
+ Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
+ Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
+
+ /* switch power to VAUX if supported and PME from D3cold */
+ if ( (sky2_read32(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
+ pci_pme_capable(hw->pdev, PCI_D3cold))
+ sky2_write8(hw, B0_POWER_CTRL,
+ (PC_VAUX_ENA | PC_VCC_ENA |
+ PC_VAUX_ON | PC_VCC_OFF));
+
+ /* turn off "driver loaded LED" */
+ sky2_write16(hw, B0_CTST, Y2_LED_STAT_OFF);
+}
+
+static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port)
+{
+ u16 reg;
+
+ /* disable all GMAC IRQ's */
+ sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0);
+
+ gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */
+ gma_write16(hw, port, GM_MC_ADDR_H2, 0);
+ gma_write16(hw, port, GM_MC_ADDR_H3, 0);
+ gma_write16(hw, port, GM_MC_ADDR_H4, 0);
+
+ reg = gma_read16(hw, port, GM_RX_CTRL);
+ reg |= GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA;
+ gma_write16(hw, port, GM_RX_CTRL, reg);
+}
+
+/* flow control to advertise bits */
+static const u16 copper_fc_adv[] = {
+ [FC_NONE] = 0,
+ [FC_TX] = PHY_M_AN_ASP,
+ [FC_RX] = PHY_M_AN_PC,
+ [FC_BOTH] = PHY_M_AN_PC | PHY_M_AN_ASP,
+};
+
+/* flow control to advertise bits when using 1000BaseX */
+static const u16 fiber_fc_adv[] = {
+ [FC_NONE] = PHY_M_P_NO_PAUSE_X,
+ [FC_TX] = PHY_M_P_ASYM_MD_X,
+ [FC_RX] = PHY_M_P_SYM_MD_X,
+ [FC_BOTH] = PHY_M_P_BOTH_MD_X,
+};
+
+/* flow control to GMA disable bits */
+static const u16 gm_fc_disable[] = {
+ [FC_NONE] = GM_GPCR_FC_RX_DIS | GM_GPCR_FC_TX_DIS,
+ [FC_TX] = GM_GPCR_FC_RX_DIS,
+ [FC_RX] = GM_GPCR_FC_TX_DIS,
+ [FC_BOTH] = 0,
+};
+
+
+static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
+{
+ struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
+ u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg;
+
+ if ( (sky2->flags & SKY2_FLAG_AUTO_SPEED) &&
+ !(hw->flags & SKY2_HW_NEWER_PHY)) {
+ u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
+
+ ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
+ PHY_M_EC_MAC_S_MSK);
+ ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ);
+
+ /* on PHY 88E1040 Rev.D0 (and newer) downshift control changed */
+ if (hw->chip_id == CHIP_ID_YUKON_EC)
+ /* set downshift counter to 3x and enable downshift */
+ ectrl |= PHY_M_EC_DSC_2(2) | PHY_M_EC_DOWN_S_ENA;
+ else
+ /* set master & slave downshift counter to 1x */
+ ectrl |= PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1);
+
+ gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl);
+ }
+
+ ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
+ if (sky2_is_copper(hw)) {
+ if (!(hw->flags & SKY2_HW_GIGABIT)) {
+ /* enable automatic crossover */
+ ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1;
+
+ if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
+ hw->chip_rev == CHIP_REV_YU_FE2_A0) {
+ u16 spec;
+
+ /* Enable Class A driver for FE+ A0 */
+ spec = gm_phy_read(hw, port, PHY_MARV_FE_SPEC_2);
+ spec |= PHY_M_FESC_SEL_CL_A;
+ gm_phy_write(hw, port, PHY_MARV_FE_SPEC_2, spec);
+ }
+ } else {
+ /* disable energy detect */
+ ctrl &= ~PHY_M_PC_EN_DET_MSK;
+
+ /* enable automatic crossover */
+ ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO);
+
+ /* downshift on PHY 88E1112 and 88E1149 is changed */
+ if ( (sky2->flags & SKY2_FLAG_AUTO_SPEED) &&
+ (hw->flags & SKY2_HW_NEWER_PHY)) {
+ /* set downshift counter to 3x and enable downshift */
+ ctrl &= ~PHY_M_PC_DSC_MSK;
+ ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA;
+ }
+ }
+ } else {
+ /* workaround for deviation #4.88 (CRC errors) */
+ /* disable Automatic Crossover */
+
+ ctrl &= ~PHY_M_PC_MDIX_MSK;
+ }
+
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
+
+ /* special setup for PHY 88E1112 Fiber */
+ if (hw->chip_id == CHIP_ID_YUKON_XL && (hw->flags & SKY2_HW_FIBRE_PHY)) {
+ pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
+
+ /* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
+ ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
+ ctrl &= ~PHY_M_MAC_MD_MSK;
+ ctrl |= PHY_M_MAC_MODE_SEL(PHY_M_MAC_MD_1000BX);
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
+
+ if (hw->pmd_type == 'P') {
+ /* select page 1 to access Fiber registers */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 1);
+
+ /* for SFP-module set SIGDET polarity to low */
+ ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
+ ctrl |= PHY_M_FIB_SIGD_POL;
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
+ }
+
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
+ }
+
+ ctrl = PHY_CT_RESET;
+ ct1000 = 0;
+ adv = PHY_AN_CSMA;
+ reg = 0;
+
+ if (sky2->flags & SKY2_FLAG_AUTO_SPEED) {
+ if (sky2_is_copper(hw)) {
+ if (sky2->advertising & ADVERTISED_1000baseT_Full)
+ ct1000 |= PHY_M_1000C_AFD;
+ if (sky2->advertising & ADVERTISED_1000baseT_Half)
+ ct1000 |= PHY_M_1000C_AHD;
+ if (sky2->advertising & ADVERTISED_100baseT_Full)
+ adv |= PHY_M_AN_100_FD;
+ if (sky2->advertising & ADVERTISED_100baseT_Half)
+ adv |= PHY_M_AN_100_HD;
+ if (sky2->advertising & ADVERTISED_10baseT_Full)
+ adv |= PHY_M_AN_10_FD;
+ if (sky2->advertising & ADVERTISED_10baseT_Half)
+ adv |= PHY_M_AN_10_HD;
+
+ } else { /* special defines for FIBER (88E1040S only) */
+ if (sky2->advertising & ADVERTISED_1000baseT_Full)
+ adv |= PHY_M_AN_1000X_AFD;
+ if (sky2->advertising & ADVERTISED_1000baseT_Half)
+ adv |= PHY_M_AN_1000X_AHD;
+ }
+
+ /* Restart Auto-negotiation */
+ ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG;
+ } else {
+ /* forced speed/duplex settings */
+ ct1000 = PHY_M_1000C_MSE;
+
+ /* Disable auto update for duplex flow control and duplex */
+ reg |= GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_SPD_DIS;
+
+ switch (sky2->speed) {
+ case SPEED_1000:
+ ctrl |= PHY_CT_SP1000;
+ reg |= GM_GPCR_SPEED_1000;
+ break;
+ case SPEED_100:
+ ctrl |= PHY_CT_SP100;
+ reg |= GM_GPCR_SPEED_100;
+ break;
+ }
+
+ if (sky2->duplex == DUPLEX_FULL) {
+ reg |= GM_GPCR_DUP_FULL;
+ ctrl |= PHY_CT_DUP_MD;
+ } else if (sky2->speed < SPEED_1000)
+ sky2->flow_mode = FC_NONE;
+ }
+
+ if (sky2->flags & SKY2_FLAG_AUTO_PAUSE) {
+ if (sky2_is_copper(hw))
+ adv |= copper_fc_adv[sky2->flow_mode];
+ else
+ adv |= fiber_fc_adv[sky2->flow_mode];
+ } else {
+ reg |= GM_GPCR_AU_FCT_DIS;
+ reg |= gm_fc_disable[sky2->flow_mode];
+
+ /* Forward pause packets to GMAC? */
+ if (sky2->flow_mode & FC_RX)
+ sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
+ else
+ sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
+ }
+
+ gma_write16(hw, port, GM_GP_CTRL, reg);
+
+ if (hw->flags & SKY2_HW_GIGABIT)
+ gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000);
+
+ gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv);
+ gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
+
+ /* Setup Phy LED's */
+ ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS);
+ ledover = 0;
+
+ switch (hw->chip_id) {
+ case CHIP_ID_YUKON_FE:
+ /* on 88E3082 these bits are at 11..9 (shifted left) */
+ ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) << 1;
+
+ ctrl = gm_phy_read(hw, port, PHY_MARV_FE_LED_PAR);
+
+ /* delete ACT LED control bits */
+ ctrl &= ~PHY_M_FELP_LED1_MSK;
+ /* change ACT LED control to blink mode */
+ ctrl |= PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_ACT_BL);
+ gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl);
+ break;
+
+ case CHIP_ID_YUKON_FE_P:
+ /* Enable Link Partner Next Page */
+ ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
+ ctrl |= PHY_M_PC_ENA_LIP_NP;
+
+ /* disable Energy Detect and enable scrambler */
+ ctrl &= ~(PHY_M_PC_ENA_ENE_DT | PHY_M_PC_DIS_SCRAMB);
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
+
+ /* set LED2 -> ACT, LED1 -> LINK, LED0 -> SPEED */
+ ctrl = PHY_M_FELP_LED2_CTRL(LED_PAR_CTRL_ACT_BL) |
+ PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_LINK) |
+ PHY_M_FELP_LED0_CTRL(LED_PAR_CTRL_SPEED);
+
+ gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl);
+ break;
+
+ case CHIP_ID_YUKON_XL:
+ pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
+
+ /* select page 3 to access LED control register */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
+
+ /* set LED Function Control register */
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+ (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
+ PHY_M_LEDC_INIT_CTRL(7) | /* 10 Mbps */
+ PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
+ PHY_M_LEDC_STA0_CTRL(7))); /* 1000 Mbps */
+
+ /* set Polarity Control register */
+ gm_phy_write(hw, port, PHY_MARV_PHY_STAT,
+ (PHY_M_POLC_LS1_P_MIX(4) |
+ PHY_M_POLC_IS0_P_MIX(4) |
+ PHY_M_POLC_LOS_CTRL(2) |
+ PHY_M_POLC_INIT_CTRL(2) |
+ PHY_M_POLC_STA1_CTRL(2) |
+ PHY_M_POLC_STA0_CTRL(2)));
+
+ /* restore page register */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
+ break;
+
+ case CHIP_ID_YUKON_EC_U:
+ case CHIP_ID_YUKON_EX:
+ case CHIP_ID_YUKON_SUPR:
+ pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
+
+ /* select page 3 to access LED control register */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
+
+ /* set LED Function Control register */
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+ (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
+ PHY_M_LEDC_INIT_CTRL(8) | /* 10 Mbps */
+ PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
+ PHY_M_LEDC_STA0_CTRL(7)));/* 1000 Mbps */
+
+ /* set Blink Rate in LED Timer Control Register */
+ gm_phy_write(hw, port, PHY_MARV_INT_MASK,
+ ledctrl | PHY_M_LED_BLINK_RT(BLINK_84MS));
+ /* restore page register */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
+ break;
+
+ default:
+ /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
+ ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
+
+ /* turn off the Rx LED (LED_RX) */
+ ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
+ }
+
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_UL_2) {
+ /* apply fixes in PHY AFE */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
+
+ /* increase differential signal amplitude in 10BASE-T */
+ gm_phy_write(hw, port, 0x18, 0xaa99);
+ gm_phy_write(hw, port, 0x17, 0x2011);
+
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+ /* fix for IEEE A/B Symmetry failure in 1000BASE-T */
+ gm_phy_write(hw, port, 0x18, 0xa204);
+ gm_phy_write(hw, port, 0x17, 0x2002);
+ }
+
+ /* set page register to 0 */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
+ } else if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
+ hw->chip_rev == CHIP_REV_YU_FE2_A0) {
+ /* apply workaround for integrated resistors calibration */
+ gm_phy_write(hw, port, PHY_MARV_PAGE_ADDR, 17);
+ gm_phy_write(hw, port, PHY_MARV_PAGE_DATA, 0x3f60);
+ } else if (hw->chip_id == CHIP_ID_YUKON_OPT && hw->chip_rev == 0) {
+ /* apply fixes in PHY AFE */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00ff);
+
+ /* apply RDAC termination workaround */
+ gm_phy_write(hw, port, 24, 0x2800);
+ gm_phy_write(hw, port, 23, 0x2001);
+
+ /* set page register back to 0 */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
+ } else if (hw->chip_id != CHIP_ID_YUKON_EX &&
+ hw->chip_id < CHIP_ID_YUKON_SUPR) {
+ /* no effect on Yukon-XL */
+ gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
+
+ if (!(sky2->flags & SKY2_FLAG_AUTO_SPEED) ||
+ sky2->speed == SPEED_100) {
+ /* turn on 100 Mbps LED (LED_LINK100) */
+ ledover |= PHY_M_LED_MO_100(MO_LED_ON);
+ }
+
+ if (ledover)
+ gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
+
+ } else if (hw->chip_id == CHIP_ID_YUKON_PRM &&
+ (sky2_read8(hw, B2_MAC_CFG) & 0xf) == 0x7) {
+ int i;
+ /* This a phy register setup workaround copied from vendor driver. */
+ static const struct {
+ u16 reg, val;
+ } eee_afe[] = {
+ { 0x156, 0x58ce },
+ { 0x153, 0x99eb },
+ { 0x141, 0x8064 },
+ /* { 0x155, 0x130b },*/
+ { 0x000, 0x0000 },
+ { 0x151, 0x8433 },
+ { 0x14b, 0x8c44 },
+ { 0x14c, 0x0f90 },
+ { 0x14f, 0x39aa },
+ /* { 0x154, 0x2f39 },*/
+ { 0x14d, 0xba33 },
+ { 0x144, 0x0048 },
+ { 0x152, 0x2010 },
+ /* { 0x158, 0x1223 },*/
+ { 0x140, 0x4444 },
+ { 0x154, 0x2f3b },
+ { 0x158, 0xb203 },
+ { 0x157, 0x2029 },
+ };
+
+ /* Start Workaround for OptimaEEE Rev.Z0 */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00fb);
+
+ gm_phy_write(hw, port, 1, 0x4099);
+ gm_phy_write(hw, port, 3, 0x1120);
+ gm_phy_write(hw, port, 11, 0x113c);
+ gm_phy_write(hw, port, 14, 0x8100);
+ gm_phy_write(hw, port, 15, 0x112a);
+ gm_phy_write(hw, port, 17, 0x1008);
+
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00fc);
+ gm_phy_write(hw, port, 1, 0x20b0);
+
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00ff);
+
+ for (i = 0; i < ARRAY_SIZE(eee_afe); i++) {
+ /* apply AFE settings */
+ gm_phy_write(hw, port, 17, eee_afe[i].val);
+ gm_phy_write(hw, port, 16, eee_afe[i].reg | 1u<<13);
+ }
+
+ /* End Workaround for OptimaEEE */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
+
+ /* Enable 10Base-Te (EEE) */
+ if (hw->chip_id >= CHIP_ID_YUKON_PRM) {
+ reg = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
+ gm_phy_write(hw, port, PHY_MARV_EXT_CTRL,
+ reg | PHY_M_10B_TE_ENABLE);
+ }
+ }
+
+ /* Enable phy interrupt on auto-negotiation complete (or link up) */
+ if (sky2->flags & SKY2_FLAG_AUTO_SPEED)
+ gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
+ else
+ gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
+}
+
+static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
+static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA };
+
+static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port)
+{
+ u32 reg1;
+
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
+ reg1 &= ~phy_power[port];
+
+ if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > CHIP_REV_YU_XL_A1)
+ reg1 |= coma_mode[port];
+
+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+ sky2_pci_read32(hw, PCI_DEV_REG1);
+
+ if (hw->chip_id == CHIP_ID_YUKON_FE)
+ gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_ANE);
+ else if (hw->flags & SKY2_HW_ADV_POWER_CTL)
+ sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
+}
+
+static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port)
+{
+ u32 reg1;
+ u16 ctrl;
+
+ /* release GPHY Control reset */
+ sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
+
+ /* release GMAC reset */
+ sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
+
+ if (hw->flags & SKY2_HW_NEWER_PHY) {
+ /* select page 2 to access MAC control register */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
+
+ ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
+ /* allow GMII Power Down */
+ ctrl &= ~PHY_M_MAC_GMIF_PUP;
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
+
+ /* set page register back to 0 */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
+ }
+
+ /* setup General Purpose Control Register */
+ gma_write16(hw, port, GM_GP_CTRL,
+ GM_GPCR_FL_PASS | GM_GPCR_SPEED_100 |
+ GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS |
+ GM_GPCR_AU_SPD_DIS);
+
+ if (hw->chip_id != CHIP_ID_YUKON_EC) {
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+ /* select page 2 to access MAC control register */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
+
+ ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
+ /* enable Power Down */
+ ctrl |= PHY_M_PC_POW_D_ENA;
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
+
+ /* set page register back to 0 */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
+ }
+
+ /* set IEEE compatible Power Down Mode (dev. #4.99) */
+ gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_PDOWN);
+ }
+
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
+ reg1 |= phy_power[port]; /* set PHY to PowerDown/COMA Mode */
+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+}
+
+/* configure IPG according to used link speed */
+static void sky2_set_ipg(struct sky2_port *sky2)
+{
+ u16 reg;
+
+ reg = gma_read16(sky2->hw, sky2->port, GM_SERIAL_MODE);
+ reg &= ~GM_SMOD_IPG_MSK;
+ if (sky2->speed > SPEED_100)
+ reg |= IPG_DATA_VAL(IPG_DATA_DEF_1000);
+ else
+ reg |= IPG_DATA_VAL(IPG_DATA_DEF_10_100);
+ gma_write16(sky2->hw, sky2->port, GM_SERIAL_MODE, reg);
+}
+
+/* Enable Rx/Tx */
+static void sky2_enable_rx_tx(struct sky2_port *sky2)
+{
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ u16 reg;
+
+ reg = gma_read16(hw, port, GM_GP_CTRL);
+ reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
+ gma_write16(hw, port, GM_GP_CTRL, reg);
+}
+
+/* Force a renegotiation */
+static void sky2_phy_reinit(struct sky2_port *sky2)
+{
+ spin_lock_bh(&sky2->phy_lock);
+ sky2_phy_init(sky2->hw, sky2->port);
+ sky2_enable_rx_tx(sky2);
+ spin_unlock_bh(&sky2->phy_lock);
+}
+
+/* Put device in state to listen for Wake On Lan */
+static void sky2_wol_init(struct sky2_port *sky2)
+{
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ enum flow_control save_mode;
+ u16 ctrl;
+
+ /* Bring hardware out of reset */
+ sky2_write16(hw, B0_CTST, CS_RST_CLR);
+ sky2_write16(hw, SK_REG(port, GMAC_LINK_CTRL), GMLC_RST_CLR);
+
+ sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
+ sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
+
+ /* Force to 10/100
+ * sky2_reset will re-enable on resume
+ */
+ save_mode = sky2->flow_mode;
+ ctrl = sky2->advertising;
+
+ sky2->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full);
+ sky2->flow_mode = FC_NONE;
+
+ spin_lock_bh(&sky2->phy_lock);
+ sky2_phy_power_up(hw, port);
+ sky2_phy_init(hw, port);
+ spin_unlock_bh(&sky2->phy_lock);
+
+ sky2->flow_mode = save_mode;
+ sky2->advertising = ctrl;
+
+ /* Set GMAC to no flow control and auto update for speed/duplex */
+ gma_write16(hw, port, GM_GP_CTRL,
+ GM_GPCR_FC_TX_DIS|GM_GPCR_TX_ENA|GM_GPCR_RX_ENA|
+ GM_GPCR_DUP_FULL|GM_GPCR_FC_RX_DIS|GM_GPCR_AU_FCT_DIS);
+
+ /* Set WOL address */
+ memcpy_toio(hw->regs + WOL_REGS(port, WOL_MAC_ADDR),
+ sky2->netdev->dev_addr, ETH_ALEN);
+
+ /* Turn on appropriate WOL control bits */
+ sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), WOL_CTL_CLEAR_RESULT);
+ ctrl = 0;
+ if (sky2->wol & WAKE_PHY)
+ ctrl |= WOL_CTL_ENA_PME_ON_LINK_CHG|WOL_CTL_ENA_LINK_CHG_UNIT;
+ else
+ ctrl |= WOL_CTL_DIS_PME_ON_LINK_CHG|WOL_CTL_DIS_LINK_CHG_UNIT;
+
+ if (sky2->wol & WAKE_MAGIC)
+ ctrl |= WOL_CTL_ENA_PME_ON_MAGIC_PKT|WOL_CTL_ENA_MAGIC_PKT_UNIT;
+ else
+ ctrl |= WOL_CTL_DIS_PME_ON_MAGIC_PKT|WOL_CTL_DIS_MAGIC_PKT_UNIT;
+
+ ctrl |= WOL_CTL_DIS_PME_ON_PATTERN|WOL_CTL_DIS_PATTERN_UNIT;
+ sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl);
+
+ /* Disable PiG firmware */
+ sky2_write16(hw, B0_CTST, Y2_HW_WOL_OFF);
+
+ /* Needed by some broken BIOSes, use PCI rather than PCI-e for WOL */
+ if (legacy_pme) {
+ u32 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
+ reg1 |= PCI_Y2_PME_LEGACY;
+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+ }
+
+ /* block receiver */
+ sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
+ sky2_read32(hw, B0_CTST);
+}
+
+static void sky2_set_tx_stfwd(struct sky2_hw *hw, unsigned port)
+{
+ struct net_device *dev = hw->dev[port];
+
+ if ( (hw->chip_id == CHIP_ID_YUKON_EX &&
+ hw->chip_rev != CHIP_REV_YU_EX_A0) ||
+ hw->chip_id >= CHIP_ID_YUKON_FE_P) {
+ /* Yukon-Extreme B0 and further Extreme devices */
+ sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_ENA);
+ } else if (dev->mtu > ETH_DATA_LEN) {
+ /* set Tx GMAC FIFO Almost Empty Threshold */
+ sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR),
+ (ECU_JUMBO_WM << 16) | ECU_AE_THR);
+
+ sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_DIS);
+ } else
+ sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_ENA);
+}
+
+static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
+{
+ struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
+ u16 reg;
+ u32 rx_reg;
+ int i;
+ const u8 *addr = hw->dev[port]->dev_addr;
+
+ sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
+ sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
+
+ sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
+
+ if (hw->chip_id == CHIP_ID_YUKON_XL &&
+ hw->chip_rev == CHIP_REV_YU_XL_A0 &&
+ port == 1) {
+ /* WA DEV_472 -- looks like crossed wires on port 2 */
+ /* clear GMAC 1 Control reset */
+ sky2_write8(hw, SK_REG(0, GMAC_CTRL), GMC_RST_CLR);
+ do {
+ sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_SET);
+ sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_CLR);
+ } while (gm_phy_read(hw, 1, PHY_MARV_ID0) != PHY_MARV_ID0_VAL ||
+ gm_phy_read(hw, 1, PHY_MARV_ID1) != PHY_MARV_ID1_Y2 ||
+ gm_phy_read(hw, 1, PHY_MARV_INT_MASK) != 0);
+ }
+
+ sky2_read16(hw, SK_REG(port, GMAC_IRQ_SRC));
+
+ /* Enable Transmit FIFO Underrun */
+ sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK);
+
+ spin_lock_bh(&sky2->phy_lock);
+ sky2_phy_power_up(hw, port);
+ sky2_phy_init(hw, port);
+ spin_unlock_bh(&sky2->phy_lock);
+
+ /* MIB clear */
+ reg = gma_read16(hw, port, GM_PHY_ADDR);
+ gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR);
+
+ for (i = GM_MIB_CNT_BASE; i <= GM_MIB_CNT_END; i += 4)
+ gma_read16(hw, port, i);
+ gma_write16(hw, port, GM_PHY_ADDR, reg);
+
+ /* transmit control */
+ gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF));
+
+ /* receive control reg: unicast + multicast + no FCS */
+ gma_write16(hw, port, GM_RX_CTRL,
+ GM_RXCR_UCF_ENA | GM_RXCR_CRC_DIS | GM_RXCR_MCF_ENA);
+
+ /* transmit flow control */
+ gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff);
+
+ /* transmit parameter */
+ gma_write16(hw, port, GM_TX_PARAM,
+ TX_JAM_LEN_VAL(TX_JAM_LEN_DEF) |
+ TX_JAM_IPG_VAL(TX_JAM_IPG_DEF) |
+ TX_IPG_JAM_DATA(TX_IPG_JAM_DEF) |
+ TX_BACK_OFF_LIM(TX_BOF_LIM_DEF));
+
+ /* serial mode register */
+ reg = DATA_BLIND_VAL(DATA_BLIND_DEF) |
+ GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF_1000);
+
+ if (hw->dev[port]->mtu > ETH_DATA_LEN)
+ reg |= GM_SMOD_JUMBO_ENA;
+
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
+ hw->chip_rev == CHIP_REV_YU_EC_U_B1)
+ reg |= GM_NEW_FLOW_CTRL;
+
+ gma_write16(hw, port, GM_SERIAL_MODE, reg);
+
+ /* virtual address for data */
+ gma_set_addr(hw, port, GM_SRC_ADDR_2L, addr);
+
+ /* physical address: used for pause frames */
+ gma_set_addr(hw, port, GM_SRC_ADDR_1L, addr);
+
+ /* ignore counter overflows */
+ gma_write16(hw, port, GM_TX_IRQ_MSK, 0);
+ gma_write16(hw, port, GM_RX_IRQ_MSK, 0);
+ gma_write16(hw, port, GM_TR_IRQ_MSK, 0);
+
+ /* Configure Rx MAC FIFO */
+ sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
+ rx_reg = GMF_OPER_ON | GMF_RX_F_FL_ON;
+ if (hw->chip_id == CHIP_ID_YUKON_EX ||
+ hw->chip_id == CHIP_ID_YUKON_FE_P)
+ rx_reg |= GMF_RX_OVER_ON;
+
+ sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), rx_reg);
+
+ if (hw->chip_id == CHIP_ID_YUKON_XL) {
+ /* Hardware errata - clear flush mask */
+ sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), 0);
+ } else {
+ /* Flush Rx MAC FIFO on any flow control or error */
+ sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
+ }
+
+ /* Set threshold to 0xa (64 bytes) + 1 to workaround pause bug */
+ reg = RX_GMF_FL_THR_DEF + 1;
+ /* Another magic mystery workaround from sk98lin */
+ if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
+ hw->chip_rev == CHIP_REV_YU_FE2_A0)
+ reg = 0x178;
+ sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), reg);
+
+ /* Configure Tx MAC FIFO */
+ sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
+ sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
+
+ /* On chips without ram buffer, pause is controlled by MAC level */
+ if (!(hw->flags & SKY2_HW_RAM_BUFFER)) {
+ /* Pause threshold is scaled by 8 in bytes */
+ if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
+ hw->chip_rev == CHIP_REV_YU_FE2_A0)
+ reg = 1568 / 8;
+ else
+ reg = 1024 / 8;
+ sky2_write16(hw, SK_REG(port, RX_GMF_UP_THR), reg);
+ sky2_write16(hw, SK_REG(port, RX_GMF_LP_THR), 768 / 8);
+
+ sky2_set_tx_stfwd(hw, port);
+ }
+
+ if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
+ hw->chip_rev == CHIP_REV_YU_FE2_A0) {
+ /* disable dynamic watermark */
+ reg = sky2_read16(hw, SK_REG(port, TX_GMF_EA));
+ reg &= ~TX_DYN_WM_ENA;
+ sky2_write16(hw, SK_REG(port, TX_GMF_EA), reg);
+ }
+}
+
+/* Assign Ram Buffer allocation to queue */
+static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, u32 space)
+{
+ u32 end;
+
+ /* convert from K bytes to qwords used for hw register */
+ start *= 1024/8;
+ space *= 1024/8;
+ end = start + space - 1;
+
+ sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR);
+ sky2_write32(hw, RB_ADDR(q, RB_START), start);
+ sky2_write32(hw, RB_ADDR(q, RB_END), end);
+ sky2_write32(hw, RB_ADDR(q, RB_WP), start);
+ sky2_write32(hw, RB_ADDR(q, RB_RP), start);
+
+ if (q == Q_R1 || q == Q_R2) {
+ u32 tp = space - space/4;
+
+ /* On receive queue's set the thresholds
+ * give receiver priority when > 3/4 full
+ * send pause when down to 2K
+ */
+ sky2_write32(hw, RB_ADDR(q, RB_RX_UTHP), tp);
+ sky2_write32(hw, RB_ADDR(q, RB_RX_LTHP), space/2);
+
+ tp = space - 8192/8;
+ sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), tp);
+ sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), space/4);
+ } else {
+ /* Enable store & forward on Tx queue's because
+ * Tx FIFO is only 1K on Yukon
+ */
+ sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_STFWD);
+ }
+
+ sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_OP_MD);
+ sky2_read8(hw, RB_ADDR(q, RB_CTRL));
+}
+
+/* Setup Bus Memory Interface */
+static void sky2_qset(struct sky2_hw *hw, u16 q)
+{
+ sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_RESET);
+ sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_OPER_INIT);
+ sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_FIFO_OP_ON);
+ sky2_write32(hw, Q_ADDR(q, Q_WM), BMU_WM_DEFAULT);
+}
+
+/* Setup prefetch unit registers. This is the interface between
+ * hardware and driver list elements
+ */
+static void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr,
+ dma_addr_t addr, u32 last)
+{
+ sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
+ sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_CLR);
+ sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_HI), upper_32_bits(addr));
+ sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_LO), lower_32_bits(addr));
+ sky2_write16(hw, Y2_QADDR(qaddr, PREF_UNIT_LAST_IDX), last);
+ sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_OP_ON);
+
+ sky2_read32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL));
+}
+
+static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2, u16 *slot)
+{
+ struct sky2_tx_le *le = sky2->tx_le + *slot;
+
+ *slot = RING_NEXT(*slot, sky2->tx_ring_size);
+ le->ctrl = 0;
+ return le;
+}
+
+static void tx_init(struct sky2_port *sky2)
+{
+ struct sky2_tx_le *le;
+
+ sky2->tx_prod = sky2->tx_cons = 0;
+ sky2->tx_tcpsum = 0;
+ sky2->tx_last_mss = 0;
+ netdev_reset_queue(sky2->netdev);
+
+ le = get_tx_le(sky2, &sky2->tx_prod);
+ le->addr = 0;
+ le->opcode = OP_ADDR64 | HW_OWNER;
+ sky2->tx_last_upper = 0;
+}
+
+/* Update chip's next pointer */
+static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx)
+{
+ /* Make sure write' to descriptors are complete before we tell hardware */
+ wmb();
+ sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx);
+
+ /* Synchronize I/O on since next processor may write to tail */
+ mmiowb();
+}
+
+
+static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2)
+{
+ struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put;
+ sky2->rx_put = RING_NEXT(sky2->rx_put, RX_LE_SIZE);
+ le->ctrl = 0;
+ return le;
+}
+
+static unsigned sky2_get_rx_threshold(struct sky2_port *sky2)
+{
+ unsigned size;
+
+ /* Space needed for frame data + headers rounded up */
+ size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
+
+ /* Stopping point for hardware truncation */
+ return (size - 8) / sizeof(u32);
+}
+
+static unsigned sky2_get_rx_data_size(struct sky2_port *sky2)
+{
+ struct rx_ring_info *re;
+ unsigned size;
+
+ /* Space needed for frame data + headers rounded up */
+ size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
+
+ sky2->rx_nfrags = size >> PAGE_SHIFT;
+ BUG_ON(sky2->rx_nfrags > ARRAY_SIZE(re->frag_addr));
+
+ /* Compute residue after pages */
+ size -= sky2->rx_nfrags << PAGE_SHIFT;
+
+ /* Optimize to handle small packets and headers */
+ if (size < copybreak)
+ size = copybreak;
+ if (size < ETH_HLEN)
+ size = ETH_HLEN;
+
+ return size;
+}
+
+/* Build description to hardware for one receive segment */
+static void sky2_rx_add(struct sky2_port *sky2, u8 op,
+ dma_addr_t map, unsigned len)
+{
+ struct sky2_rx_le *le;
+
+ if (sizeof(dma_addr_t) > sizeof(u32)) {
+ le = sky2_next_rx(sky2);
+ le->addr = cpu_to_le32(upper_32_bits(map));
+ le->opcode = OP_ADDR64 | HW_OWNER;
+ }
+
+ le = sky2_next_rx(sky2);
+ le->addr = cpu_to_le32(lower_32_bits(map));
+ le->length = cpu_to_le16(len);
+ le->opcode = op | HW_OWNER;
+}
+
+/* Build description to hardware for one possibly fragmented skb */
+static void sky2_rx_submit(struct sky2_port *sky2,
+ const struct rx_ring_info *re)
+{
+ int i;
+
+ sky2_rx_add(sky2, OP_PACKET, re->data_addr, sky2->rx_data_size);
+
+ for (i = 0; i < skb_shinfo(re->skb)->nr_frags; i++)
+ sky2_rx_add(sky2, OP_BUFFER, re->frag_addr[i], PAGE_SIZE);
+}
+
+
+static int sky2_rx_map_skb(struct pci_dev *pdev, struct rx_ring_info *re,
+ unsigned size)
+{
+ struct sk_buff *skb = re->skb;
+ int i;
+
+ re->data_addr = pci_map_single(pdev, skb->data, size, PCI_DMA_FROMDEVICE);
+ if (pci_dma_mapping_error(pdev, re->data_addr))
+ goto mapping_error;
+
+ dma_unmap_len_set(re, data_size, size);
+
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+ const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+
+ re->frag_addr[i] = skb_frag_dma_map(&pdev->dev, frag, 0,
+ skb_frag_size(frag),
+ DMA_FROM_DEVICE);
+
+ if (dma_mapping_error(&pdev->dev, re->frag_addr[i]))
+ goto map_page_error;
+ }
+ return 0;
+
+map_page_error:
+ while (--i >= 0) {
+ pci_unmap_page(pdev, re->frag_addr[i],
+ skb_frag_size(&skb_shinfo(skb)->frags[i]),
+ PCI_DMA_FROMDEVICE);
+ }
+
+ pci_unmap_single(pdev, re->data_addr, dma_unmap_len(re, data_size),
+ PCI_DMA_FROMDEVICE);
+
+mapping_error:
+ if (net_ratelimit())
+ dev_warn(&pdev->dev, "%s: rx mapping error\n",
+ skb->dev->name);
+ return -EIO;
+}
+
+static void sky2_rx_unmap_skb(struct pci_dev *pdev, struct rx_ring_info *re)
+{
+ struct sk_buff *skb = re->skb;
+ int i;
+
+ pci_unmap_single(pdev, re->data_addr, dma_unmap_len(re, data_size),
+ PCI_DMA_FROMDEVICE);
+
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
+ pci_unmap_page(pdev, re->frag_addr[i],
+ skb_frag_size(&skb_shinfo(skb)->frags[i]),
+ PCI_DMA_FROMDEVICE);
+}
+
+/* Tell chip where to start receive checksum.
+ * Actually has two checksums, but set both same to avoid possible byte
+ * order problems.
+ */
+static void rx_set_checksum(struct sky2_port *sky2)
+{
+ struct sky2_rx_le *le = sky2_next_rx(sky2);
+
+ le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN);
+ le->ctrl = 0;
+ le->opcode = OP_TCPSTART | HW_OWNER;
+
+ sky2_write32(sky2->hw,
+ Q_ADDR(rxqaddr[sky2->port], Q_CSR),
+ (sky2->netdev->features & NETIF_F_RXCSUM)
+ ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
+}
+
+/* Enable/disable receive hash calculation (RSS) */
+static void rx_set_rss(struct net_device *dev, netdev_features_t features)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ int i, nkeys = 4;
+
+ /* Supports IPv6 and other modes */
+ if (hw->flags & SKY2_HW_NEW_LE) {
+ nkeys = 10;
+ sky2_write32(hw, SK_REG(sky2->port, RSS_CFG), HASH_ALL);
+ }
+
+ /* Program RSS initial values */
+ if (features & NETIF_F_RXHASH) {
+ u32 rss_key[10];
+
+ netdev_rss_key_fill(rss_key, sizeof(rss_key));
+ for (i = 0; i < nkeys; i++)
+ sky2_write32(hw, SK_REG(sky2->port, RSS_KEY + i * 4),
+ rss_key[i]);
+
+ /* Need to turn on (undocumented) flag to make hashing work */
+ sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T),
+ RX_STFW_ENA);
+
+ sky2_write32(hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
+ BMU_ENA_RX_RSS_HASH);
+ } else
+ sky2_write32(hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
+ BMU_DIS_RX_RSS_HASH);
+}
+
+/*
+ * The RX Stop command will not work for Yukon-2 if the BMU does not
+ * reach the end of packet and since we can't make sure that we have
+ * incoming data, we must reset the BMU while it is not doing a DMA
+ * transfer. Since it is possible that the RX path is still active,
+ * the RX RAM buffer will be stopped first, so any possible incoming
+ * data will not trigger a DMA. After the RAM buffer is stopped, the
+ * BMU is polled until any DMA in progress is ended and only then it
+ * will be reset.
+ */
+static void sky2_rx_stop(struct sky2_port *sky2)
+{
+ struct sky2_hw *hw = sky2->hw;
+ unsigned rxq = rxqaddr[sky2->port];
+ int i;
+
+ /* disable the RAM Buffer receive queue */
+ sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_DIS_OP_MD);
+
+ for (i = 0; i < 0xffff; i++)
+ if (sky2_read8(hw, RB_ADDR(rxq, Q_RSL))
+ == sky2_read8(hw, RB_ADDR(rxq, Q_RL)))
+ goto stopped;
+
+ netdev_warn(sky2->netdev, "receiver stop failed\n");
+stopped:
+ sky2_write32(hw, Q_ADDR(rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST);
+
+ /* reset the Rx prefetch unit */
+ sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
+ mmiowb();
+}
+
+/* Clean out receive buffer area, assumes receiver hardware stopped */
+static void sky2_rx_clean(struct sky2_port *sky2)
+{
+ unsigned i;
+
+ if (sky2->rx_le)
+ memset(sky2->rx_le, 0, RX_LE_BYTES);
+
+ for (i = 0; i < sky2->rx_pending; i++) {
+ struct rx_ring_info *re = sky2->rx_ring + i;
+
+ if (re->skb) {
+ sky2_rx_unmap_skb(sky2->hw->pdev, re);
+ kfree_skb(re->skb);
+ re->skb = NULL;
+ }
+ }
+}
+
+/* Basic MII support */
+static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct mii_ioctl_data *data = if_mii(ifr);
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ int err = -EOPNOTSUPP;
+
+ if (!netif_running(dev))
+ return -ENODEV; /* Phy still in reset */
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ data->phy_id = PHY_ADDR_MARV;
+
+ /* fallthru */
+ case SIOCGMIIREG: {
+ u16 val = 0;
+
+ spin_lock_bh(&sky2->phy_lock);
+ err = __gm_phy_read(hw, sky2->port, data->reg_num & 0x1f, &val);
+ spin_unlock_bh(&sky2->phy_lock);
+
+ data->val_out = val;
+ break;
+ }
+
+ case SIOCSMIIREG:
+ spin_lock_bh(&sky2->phy_lock);
+ err = gm_phy_write(hw, sky2->port, data->reg_num & 0x1f,
+ data->val_in);
+ spin_unlock_bh(&sky2->phy_lock);
+ break;
+ }
+ return err;
+}
+
+#define SKY2_VLAN_OFFLOADS (NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO)
+
+static void sky2_vlan_mode(struct net_device *dev, netdev_features_t features)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ u16 port = sky2->port;
+
+ if (features & NETIF_F_HW_VLAN_CTAG_RX)
+ sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
+ RX_VLAN_STRIP_ON);
+ else
+ sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
+ RX_VLAN_STRIP_OFF);
+
+ if (features & NETIF_F_HW_VLAN_CTAG_TX) {
+ sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
+ TX_VLAN_TAG_ON);
+
+ dev->vlan_features |= SKY2_VLAN_OFFLOADS;
+ } else {
+ sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
+ TX_VLAN_TAG_OFF);
+
+ /* Can't do transmit offload of vlan without hw vlan */
+ dev->vlan_features &= ~SKY2_VLAN_OFFLOADS;
+ }
+}
+
+/* Amount of required worst case padding in rx buffer */
+static inline unsigned sky2_rx_pad(const struct sky2_hw *hw)
+{
+ return (hw->flags & SKY2_HW_RAM_BUFFER) ? 8 : 2;
+}
+
+/*
+ * Allocate an skb for receiving. If the MTU is large enough
+ * make the skb non-linear with a fragment list of pages.
+ */
+static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2, gfp_t gfp)
+{
+ struct sk_buff *skb;
+ int i;
+
+ skb = __netdev_alloc_skb(sky2->netdev,
+ sky2->rx_data_size + sky2_rx_pad(sky2->hw),
+ gfp);
+ if (!skb)
+ goto nomem;
+
+ if (sky2->hw->flags & SKY2_HW_RAM_BUFFER) {
+ unsigned char *start;
+ /*
+ * Workaround for a bug in FIFO that cause hang
+ * if the FIFO if the receive buffer is not 64 byte aligned.
+ * The buffer returned from netdev_alloc_skb is
+ * aligned except if slab debugging is enabled.
+ */
+ start = PTR_ALIGN(skb->data, 8);
+ skb_reserve(skb, start - skb->data);
+ } else
+ skb_reserve(skb, NET_IP_ALIGN);
+
+ for (i = 0; i < sky2->rx_nfrags; i++) {
+ struct page *page = alloc_page(gfp);
+
+ if (!page)
+ goto free_partial;
+ skb_fill_page_desc(skb, i, page, 0, PAGE_SIZE);
+ }
+
+ return skb;
+free_partial:
+ kfree_skb(skb);
+nomem:
+ return NULL;
+}
+
+static inline void sky2_rx_update(struct sky2_port *sky2, unsigned rxq)
+{
+ sky2_put_idx(sky2->hw, rxq, sky2->rx_put);
+}
+
+static int sky2_alloc_rx_skbs(struct sky2_port *sky2)
+{
+ struct sky2_hw *hw = sky2->hw;
+ unsigned i;
+
+ sky2->rx_data_size = sky2_get_rx_data_size(sky2);
+
+ /* Fill Rx ring */
+ for (i = 0; i < sky2->rx_pending; i++) {
+ struct rx_ring_info *re = sky2->rx_ring + i;
+
+ re->skb = sky2_rx_alloc(sky2, GFP_KERNEL);
+ if (!re->skb)
+ return -ENOMEM;
+
+ if (sky2_rx_map_skb(hw->pdev, re, sky2->rx_data_size)) {
+ dev_kfree_skb(re->skb);
+ re->skb = NULL;
+ return -ENOMEM;
+ }
+ }
+ return 0;
+}
+
+/*
+ * Setup receiver buffer pool.
+ * Normal case this ends up creating one list element for skb
+ * in the receive ring. Worst case if using large MTU and each
+ * allocation falls on a different 64 bit region, that results
+ * in 6 list elements per ring entry.
+ * One element is used for checksum enable/disable, and one
+ * extra to avoid wrap.
+ */
+static void sky2_rx_start(struct sky2_port *sky2)
+{
+ struct sky2_hw *hw = sky2->hw;
+ struct rx_ring_info *re;
+ unsigned rxq = rxqaddr[sky2->port];
+ unsigned i, thresh;
+
+ sky2->rx_put = sky2->rx_next = 0;
+ sky2_qset(hw, rxq);
+
+ /* On PCI express lowering the watermark gives better performance */
+ if (pci_is_pcie(hw->pdev))
+ sky2_write32(hw, Q_ADDR(rxq, Q_WM), BMU_WM_PEX);
+
+ /* These chips have no ram buffer?
+ * MAC Rx RAM Read is controlled by hardware */
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
+ hw->chip_rev > CHIP_REV_YU_EC_U_A0)
+ sky2_write32(hw, Q_ADDR(rxq, Q_TEST), F_M_RX_RAM_DIS);
+
+ sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
+
+ if (!(hw->flags & SKY2_HW_NEW_LE))
+ rx_set_checksum(sky2);
+
+ if (!(hw->flags & SKY2_HW_RSS_BROKEN))
+ rx_set_rss(sky2->netdev, sky2->netdev->features);
+
+ /* submit Rx ring */
+ for (i = 0; i < sky2->rx_pending; i++) {
+ re = sky2->rx_ring + i;
+ sky2_rx_submit(sky2, re);
+ }
+
+ /*
+ * The receiver hangs if it receives frames larger than the
+ * packet buffer. As a workaround, truncate oversize frames, but
+ * the register is limited to 9 bits, so if you do frames > 2052
+ * you better get the MTU right!
+ */
+ thresh = sky2_get_rx_threshold(sky2);
+ if (thresh > 0x1ff)
+ sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF);
+ else {
+ sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), thresh);
+ sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
+ }
+
+ /* Tell chip about available buffers */
+ sky2_rx_update(sky2, rxq);
+
+ if (hw->chip_id == CHIP_ID_YUKON_EX ||
+ hw->chip_id == CHIP_ID_YUKON_SUPR) {
+ /*
+ * Disable flushing of non ASF packets;
+ * must be done after initializing the BMUs;
+ * drivers without ASF support should do this too, otherwise
+ * it may happen that they cannot run on ASF devices;
+ * remember that the MAC FIFO isn't reset during initialization.
+ */
+ sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_MACSEC_FLUSH_OFF);
+ }
+
+ if (hw->chip_id >= CHIP_ID_YUKON_SUPR) {
+ /* Enable RX Home Address & Routing Header checksum fix */
+ sky2_write16(hw, SK_REG(sky2->port, RX_GMF_FL_CTRL),
+ RX_IPV6_SA_MOB_ENA | RX_IPV6_DA_MOB_ENA);
+
+ /* Enable TX Home Address & Routing Header checksum fix */
+ sky2_write32(hw, Q_ADDR(txqaddr[sky2->port], Q_TEST),
+ TBMU_TEST_HOME_ADD_FIX_EN | TBMU_TEST_ROUTING_ADD_FIX_EN);
+ }
+}
+
+static int sky2_alloc_buffers(struct sky2_port *sky2)
+{
+ struct sky2_hw *hw = sky2->hw;
+
+ /* must be power of 2 */
+ sky2->tx_le = pci_alloc_consistent(hw->pdev,
+ sky2->tx_ring_size *
+ sizeof(struct sky2_tx_le),
+ &sky2->tx_le_map);
+ if (!sky2->tx_le)
+ goto nomem;
+
+ sky2->tx_ring = kcalloc(sky2->tx_ring_size, sizeof(struct tx_ring_info),
+ GFP_KERNEL);
+ if (!sky2->tx_ring)
+ goto nomem;
+
+ sky2->rx_le = pci_zalloc_consistent(hw->pdev, RX_LE_BYTES,
+ &sky2->rx_le_map);
+ if (!sky2->rx_le)
+ goto nomem;
+
+ sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct rx_ring_info),
+ GFP_KERNEL);
+ if (!sky2->rx_ring)
+ goto nomem;
+
+ return sky2_alloc_rx_skbs(sky2);
+nomem:
+ return -ENOMEM;
+}
+
+static void sky2_free_buffers(struct sky2_port *sky2)
+{
+ struct sky2_hw *hw = sky2->hw;
+
+ sky2_rx_clean(sky2);
+
+ if (sky2->rx_le) {
+ pci_free_consistent(hw->pdev, RX_LE_BYTES,
+ sky2->rx_le, sky2->rx_le_map);
+ sky2->rx_le = NULL;
+ }
+ if (sky2->tx_le) {
+ pci_free_consistent(hw->pdev,
+ sky2->tx_ring_size * sizeof(struct sky2_tx_le),
+ sky2->tx_le, sky2->tx_le_map);
+ sky2->tx_le = NULL;
+ }
+ kfree(sky2->tx_ring);
+ kfree(sky2->rx_ring);
+
+ sky2->tx_ring = NULL;
+ sky2->rx_ring = NULL;
+}
+
+static void sky2_hw_up(struct sky2_port *sky2)
+{
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ u32 ramsize;
+ int cap;
+ struct net_device *otherdev = hw->dev[sky2->port^1];
+
+ tx_init(sky2);
+
+ /*
+ * On dual port PCI-X card, there is an problem where status
+ * can be received out of order due to split transactions
+ */
+ if (otherdev && netif_running(otherdev) &&
+ (cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) {
+ u16 cmd;
+
+ cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
+ cmd &= ~PCI_X_CMD_MAX_SPLIT;
+ sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
+ }
+
+ sky2_mac_init(hw, port);
+
+ /* Register is number of 4K blocks on internal RAM buffer. */
+ ramsize = sky2_read8(hw, B2_E_0) * 4;
+ if (ramsize > 0) {
+ u32 rxspace;
+
+ netdev_dbg(sky2->netdev, "ram buffer %dK\n", ramsize);
+ if (ramsize < 16)
+ rxspace = ramsize / 2;
+ else
+ rxspace = 8 + (2*(ramsize - 16))/3;
+
+ sky2_ramset(hw, rxqaddr[port], 0, rxspace);
+ sky2_ramset(hw, txqaddr[port], rxspace, ramsize - rxspace);
+
+ /* Make sure SyncQ is disabled */
+ sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL),
+ RB_RST_SET);
+ }
+
+ sky2_qset(hw, txqaddr[port]);
+
+ /* This is copied from sk98lin 10.0.5.3; no one tells me about erratta's */
+ if (hw->chip_id == CHIP_ID_YUKON_EX && hw->chip_rev == CHIP_REV_YU_EX_B0)
+ sky2_write32(hw, Q_ADDR(txqaddr[port], Q_TEST), F_TX_CHK_AUTO_OFF);
+
+ /* Set almost empty threshold */
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
+ hw->chip_rev == CHIP_REV_YU_EC_U_A0)
+ sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), ECU_TXFF_LEV);
+
+ sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
+ sky2->tx_ring_size - 1);
+
+ sky2_vlan_mode(sky2->netdev, sky2->netdev->features);
+ netdev_update_features(sky2->netdev);
+
+ sky2_rx_start(sky2);
+}
+
+/* Setup device IRQ and enable napi to process */
+static int sky2_setup_irq(struct sky2_hw *hw, const char *name)
+{
+ struct pci_dev *pdev = hw->pdev;
+ int err;
+
+ err = request_irq(pdev->irq, sky2_intr,
+ (hw->flags & SKY2_HW_USE_MSI) ? 0 : IRQF_SHARED,
+ name, hw);
+ if (err)
+ dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
+ else {
+ hw->flags |= SKY2_HW_IRQ_SETUP;
+
+ napi_enable(&hw->napi);
+ sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
+ sky2_read32(hw, B0_IMSK);
+ }
+
+ return err;
+}
+
+
+/* Bring up network interface. */
+static int sky2_open(struct net_device *dev)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ u32 imask;
+ int err;
+
+ netif_carrier_off(dev);
+
+ err = sky2_alloc_buffers(sky2);
+ if (err)
+ goto err_out;
+
+ /* With single port, IRQ is setup when device is brought up */
+ if (hw->ports == 1 && (err = sky2_setup_irq(hw, dev->name)))
+ goto err_out;
+
+ sky2_hw_up(sky2);
+
+ /* Enable interrupts from phy/mac for port */
+ imask = sky2_read32(hw, B0_IMSK);
+
+ if (hw->chip_id == CHIP_ID_YUKON_OPT ||
+ hw->chip_id == CHIP_ID_YUKON_PRM ||
+ hw->chip_id == CHIP_ID_YUKON_OP_2)
+ imask |= Y2_IS_PHY_QLNK; /* enable PHY Quick Link */
+
+ imask |= portirq_msk[port];
+ sky2_write32(hw, B0_IMSK, imask);
+ sky2_read32(hw, B0_IMSK);
+
+ netif_info(sky2, ifup, dev, "enabling interface\n");
+
+ return 0;
+
+err_out:
+ sky2_free_buffers(sky2);
+ return err;
+}
+
+/* Modular subtraction in ring */
+static inline int tx_inuse(const struct sky2_port *sky2)
+{
+ return (sky2->tx_prod - sky2->tx_cons) & (sky2->tx_ring_size - 1);
+}
+
+/* Number of list elements available for next tx */
+static inline int tx_avail(const struct sky2_port *sky2)
+{
+ return sky2->tx_pending - tx_inuse(sky2);
+}
+
+/* Estimate of number of transmit list elements required */
+static unsigned tx_le_req(const struct sk_buff *skb)
+{
+ unsigned count;
+
+ count = (skb_shinfo(skb)->nr_frags + 1)
+ * (sizeof(dma_addr_t) / sizeof(u32));
+
+ if (skb_is_gso(skb))
+ ++count;
+ else if (sizeof(dma_addr_t) == sizeof(u32))
+ ++count; /* possible vlan */
+
+ if (skb->ip_summed == CHECKSUM_PARTIAL)
+ ++count;
+
+ return count;
+}
+
+static void sky2_tx_unmap(struct pci_dev *pdev, struct tx_ring_info *re)
+{
+ if (re->flags & TX_MAP_SINGLE)
+ pci_unmap_single(pdev, dma_unmap_addr(re, mapaddr),
+ dma_unmap_len(re, maplen),
+ PCI_DMA_TODEVICE);
+ else if (re->flags & TX_MAP_PAGE)
+ pci_unmap_page(pdev, dma_unmap_addr(re, mapaddr),
+ dma_unmap_len(re, maplen),
+ PCI_DMA_TODEVICE);
+ re->flags = 0;
+}
+
+/*
+ * Put one packet in ring for transmit.
+ * A single packet can generate multiple list elements, and
+ * the number of ring elements will probably be less than the number
+ * of list elements used.
+ */
+static netdev_tx_t sky2_xmit_frame(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ struct sky2_tx_le *le = NULL;
+ struct tx_ring_info *re;
+ unsigned i, len;
+ dma_addr_t mapping;
+ u32 upper;
+ u16 slot;
+ u16 mss;
+ u8 ctrl;
+
+ if (unlikely(tx_avail(sky2) < tx_le_req(skb)))
+ return NETDEV_TX_BUSY;
+
+ len = skb_headlen(skb);
+ mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE);
+
+ if (pci_dma_mapping_error(hw->pdev, mapping))
+ goto mapping_error;
+
+ slot = sky2->tx_prod;
+ netif_printk(sky2, tx_queued, KERN_DEBUG, dev,
+ "tx queued, slot %u, len %d\n", slot, skb->len);
+
+ /* Send high bits if needed */
+ upper = upper_32_bits(mapping);
+ if (upper != sky2->tx_last_upper) {
+ le = get_tx_le(sky2, &slot);
+ le->addr = cpu_to_le32(upper);
+ sky2->tx_last_upper = upper;
+ le->opcode = OP_ADDR64 | HW_OWNER;
+ }
+
+ /* Check for TCP Segmentation Offload */
+ mss = skb_shinfo(skb)->gso_size;
+ if (mss != 0) {
+
+ if (!(hw->flags & SKY2_HW_NEW_LE))
+ mss += ETH_HLEN + ip_hdrlen(skb) + tcp_hdrlen(skb);
+
+ if (mss != sky2->tx_last_mss) {
+ le = get_tx_le(sky2, &slot);
+ le->addr = cpu_to_le32(mss);
+
+ if (hw->flags & SKY2_HW_NEW_LE)
+ le->opcode = OP_MSS | HW_OWNER;
+ else
+ le->opcode = OP_LRGLEN | HW_OWNER;
+ sky2->tx_last_mss = mss;
+ }
+ }
+
+ ctrl = 0;
+
+ /* Add VLAN tag, can piggyback on LRGLEN or ADDR64 */
+ if (skb_vlan_tag_present(skb)) {
+ if (!le) {
+ le = get_tx_le(sky2, &slot);
+ le->addr = 0;
+ le->opcode = OP_VLAN|HW_OWNER;
+ } else
+ le->opcode |= OP_VLAN;
+ le->length = cpu_to_be16(skb_vlan_tag_get(skb));
+ ctrl |= INS_VLAN;
+ }
+
+ /* Handle TCP checksum offload */
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ /* On Yukon EX (some versions) encoding change. */
+ if (hw->flags & SKY2_HW_AUTO_TX_SUM)
+ ctrl |= CALSUM; /* auto checksum */
+ else {
+ const unsigned offset = skb_transport_offset(skb);
+ u32 tcpsum;
+
+ tcpsum = offset << 16; /* sum start */
+ tcpsum |= offset + skb->csum_offset; /* sum write */
+
+ ctrl |= CALSUM | WR_SUM | INIT_SUM | LOCK_SUM;
+ if (ip_hdr(skb)->protocol == IPPROTO_UDP)
+ ctrl |= UDPTCP;
+
+ if (tcpsum != sky2->tx_tcpsum) {
+ sky2->tx_tcpsum = tcpsum;
+
+ le = get_tx_le(sky2, &slot);
+ le->addr = cpu_to_le32(tcpsum);
+ le->length = 0; /* initial checksum value */
+ le->ctrl = 1; /* one packet */
+ le->opcode = OP_TCPLISW | HW_OWNER;
+ }
+ }
+ }
+
+ re = sky2->tx_ring + slot;
+ re->flags = TX_MAP_SINGLE;
+ dma_unmap_addr_set(re, mapaddr, mapping);
+ dma_unmap_len_set(re, maplen, len);
+
+ le = get_tx_le(sky2, &slot);
+ le->addr = cpu_to_le32(lower_32_bits(mapping));
+ le->length = cpu_to_le16(len);
+ le->ctrl = ctrl;
+ le->opcode = mss ? (OP_LARGESEND | HW_OWNER) : (OP_PACKET | HW_OWNER);
+
+
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+ const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+
+ mapping = skb_frag_dma_map(&hw->pdev->dev, frag, 0,
+ skb_frag_size(frag), DMA_TO_DEVICE);
+
+ if (dma_mapping_error(&hw->pdev->dev, mapping))
+ goto mapping_unwind;
+
+ upper = upper_32_bits(mapping);
+ if (upper != sky2->tx_last_upper) {
+ le = get_tx_le(sky2, &slot);
+ le->addr = cpu_to_le32(upper);
+ sky2->tx_last_upper = upper;
+ le->opcode = OP_ADDR64 | HW_OWNER;
+ }
+
+ re = sky2->tx_ring + slot;
+ re->flags = TX_MAP_PAGE;
+ dma_unmap_addr_set(re, mapaddr, mapping);
+ dma_unmap_len_set(re, maplen, skb_frag_size(frag));
+
+ le = get_tx_le(sky2, &slot);
+ le->addr = cpu_to_le32(lower_32_bits(mapping));
+ le->length = cpu_to_le16(skb_frag_size(frag));
+ le->ctrl = ctrl;
+ le->opcode = OP_BUFFER | HW_OWNER;
+ }
+
+ re->skb = skb;
+ le->ctrl |= EOP;
+
+ sky2->tx_prod = slot;
+
+ if (tx_avail(sky2) <= MAX_SKB_TX_LE)
+ netif_stop_queue(dev);
+
+ netdev_sent_queue(dev, skb->len);
+ sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod);
+
+ return NETDEV_TX_OK;
+
+mapping_unwind:
+ for (i = sky2->tx_prod; i != slot; i = RING_NEXT(i, sky2->tx_ring_size)) {
+ re = sky2->tx_ring + i;
+
+ sky2_tx_unmap(hw->pdev, re);
+ }
+
+mapping_error:
+ if (net_ratelimit())
+ dev_warn(&hw->pdev->dev, "%s: tx mapping error\n", dev->name);
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+}
+
+/*
+ * Free ring elements from starting at tx_cons until "done"
+ *
+ * NB:
+ * 1. The hardware will tell us about partial completion of multi-part
+ * buffers so make sure not to free skb to early.
+ * 2. This may run in parallel start_xmit because the it only
+ * looks at the tail of the queue of FIFO (tx_cons), not
+ * the head (tx_prod)
+ */
+static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
+{
+ struct net_device *dev = sky2->netdev;
+ u16 idx;
+ unsigned int bytes_compl = 0, pkts_compl = 0;
+
+ BUG_ON(done >= sky2->tx_ring_size);
+
+ for (idx = sky2->tx_cons; idx != done;
+ idx = RING_NEXT(idx, sky2->tx_ring_size)) {
+ struct tx_ring_info *re = sky2->tx_ring + idx;
+ struct sk_buff *skb = re->skb;
+
+ sky2_tx_unmap(sky2->hw->pdev, re);
+
+ if (skb) {
+ netif_printk(sky2, tx_done, KERN_DEBUG, dev,
+ "tx done %u\n", idx);
+
+ pkts_compl++;
+ bytes_compl += skb->len;
+
+ re->skb = NULL;
+ dev_kfree_skb_any(skb);
+
+ sky2->tx_next = RING_NEXT(idx, sky2->tx_ring_size);
+ }
+ }
+
+ sky2->tx_cons = idx;
+ smp_mb();
+
+ netdev_completed_queue(dev, pkts_compl, bytes_compl);
+
+ u64_stats_update_begin(&sky2->tx_stats.syncp);
+ sky2->tx_stats.packets += pkts_compl;
+ sky2->tx_stats.bytes += bytes_compl;
+ u64_stats_update_end(&sky2->tx_stats.syncp);
+}
+
+static void sky2_tx_reset(struct sky2_hw *hw, unsigned port)
+{
+ /* Disable Force Sync bit and Enable Alloc bit */
+ sky2_write8(hw, SK_REG(port, TXA_CTRL),
+ TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
+
+ /* Stop Interval Timer and Limit Counter of Tx Arbiter */
+ sky2_write32(hw, SK_REG(port, TXA_ITI_INI), 0L);
+ sky2_write32(hw, SK_REG(port, TXA_LIM_INI), 0L);
+
+ /* Reset the PCI FIFO of the async Tx queue */
+ sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR),
+ BMU_RST_SET | BMU_FIFO_RST);
+
+ /* Reset the Tx prefetch units */
+ sky2_write32(hw, Y2_QADDR(txqaddr[port], PREF_UNIT_CTRL),
+ PREF_UNIT_RST_SET);
+
+ sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET);
+ sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
+
+ sky2_read32(hw, B0_CTST);
+}
+
+static void sky2_hw_down(struct sky2_port *sky2)
+{
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ u16 ctrl;
+
+ /* Force flow control off */
+ sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
+
+ /* Stop transmitter */
+ sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP);
+ sky2_read32(hw, Q_ADDR(txqaddr[port], Q_CSR));
+
+ sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL),
+ RB_RST_SET | RB_DIS_OP_MD);
+
+ ctrl = gma_read16(hw, port, GM_GP_CTRL);
+ ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA);
+ gma_write16(hw, port, GM_GP_CTRL, ctrl);
+
+ sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
+
+ /* Workaround shared GMAC reset */
+ if (!(hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0 &&
+ port == 0 && hw->dev[1] && netif_running(hw->dev[1])))
+ sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET);
+
+ sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
+
+ /* Force any delayed status interrupt and NAPI */
+ sky2_write32(hw, STAT_LEV_TIMER_CNT, 0);
+ sky2_write32(hw, STAT_TX_TIMER_CNT, 0);
+ sky2_write32(hw, STAT_ISR_TIMER_CNT, 0);
+ sky2_read8(hw, STAT_ISR_TIMER_CTRL);
+
+ sky2_rx_stop(sky2);
+
+ spin_lock_bh(&sky2->phy_lock);
+ sky2_phy_power_down(hw, port);
+ spin_unlock_bh(&sky2->phy_lock);
+
+ sky2_tx_reset(hw, port);
+
+ /* Free any pending frames stuck in HW queue */
+ sky2_tx_complete(sky2, sky2->tx_prod);
+}
+
+/* Network shutdown */
+static int sky2_close(struct net_device *dev)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+
+ /* Never really got started! */
+ if (!sky2->tx_le)
+ return 0;
+
+ netif_info(sky2, ifdown, dev, "disabling interface\n");
+
+ if (hw->ports == 1) {
+ sky2_write32(hw, B0_IMSK, 0);
+ sky2_read32(hw, B0_IMSK);
+
+ napi_disable(&hw->napi);
+ free_irq(hw->pdev->irq, hw);
+ hw->flags &= ~SKY2_HW_IRQ_SETUP;
+ } else {
+ u32 imask;
+
+ /* Disable port IRQ */
+ imask = sky2_read32(hw, B0_IMSK);
+ imask &= ~portirq_msk[sky2->port];
+ sky2_write32(hw, B0_IMSK, imask);
+ sky2_read32(hw, B0_IMSK);
+
+ synchronize_irq(hw->pdev->irq);
+ napi_synchronize(&hw->napi);
+ }
+
+ sky2_hw_down(sky2);
+
+ sky2_free_buffers(sky2);
+
+ return 0;
+}
+
+static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux)
+{
+ if (hw->flags & SKY2_HW_FIBRE_PHY)
+ return SPEED_1000;
+
+ if (!(hw->flags & SKY2_HW_GIGABIT)) {
+ if (aux & PHY_M_PS_SPEED_100)
+ return SPEED_100;
+ else
+ return SPEED_10;
+ }
+
+ switch (aux & PHY_M_PS_SPEED_MSK) {
+ case PHY_M_PS_SPEED_1000:
+ return SPEED_1000;
+ case PHY_M_PS_SPEED_100:
+ return SPEED_100;
+ default:
+ return SPEED_10;
+ }
+}
+
+static void sky2_link_up(struct sky2_port *sky2)
+{
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ static const char *fc_name[] = {
+ [FC_NONE] = "none",
+ [FC_TX] = "tx",
+ [FC_RX] = "rx",
+ [FC_BOTH] = "both",
+ };
+
+ sky2_set_ipg(sky2);
+
+ sky2_enable_rx_tx(sky2);
+
+ gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
+
+ netif_carrier_on(sky2->netdev);
+
+ mod_timer(&hw->watchdog_timer, jiffies + 1);
+
+ /* Turn on link LED */
+ sky2_write8(hw, SK_REG(port, LNK_LED_REG),
+ LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
+
+ netif_info(sky2, link, sky2->netdev,
+ "Link is up at %d Mbps, %s duplex, flow control %s\n",
+ sky2->speed,
+ sky2->duplex == DUPLEX_FULL ? "full" : "half",
+ fc_name[sky2->flow_status]);
+}
+
+static void sky2_link_down(struct sky2_port *sky2)
+{
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ u16 reg;
+
+ gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
+
+ reg = gma_read16(hw, port, GM_GP_CTRL);
+ reg &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
+ gma_write16(hw, port, GM_GP_CTRL, reg);
+
+ netif_carrier_off(sky2->netdev);
+
+ /* Turn off link LED */
+ sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
+
+ netif_info(sky2, link, sky2->netdev, "Link is down\n");
+
+ sky2_phy_init(hw, port);
+}
+
+static enum flow_control sky2_flow(int rx, int tx)
+{
+ if (rx)
+ return tx ? FC_BOTH : FC_RX;
+ else
+ return tx ? FC_TX : FC_NONE;
+}
+
+static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
+{
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ u16 advert, lpa;
+
+ advert = gm_phy_read(hw, port, PHY_MARV_AUNE_ADV);
+ lpa = gm_phy_read(hw, port, PHY_MARV_AUNE_LP);
+ if (lpa & PHY_M_AN_RF) {
+ netdev_err(sky2->netdev, "remote fault\n");
+ return -1;
+ }
+
+ if (!(aux & PHY_M_PS_SPDUP_RES)) {
+ netdev_err(sky2->netdev, "speed/duplex mismatch\n");
+ return -1;
+ }
+
+ sky2->speed = sky2_phy_speed(hw, aux);
+ sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
+
+ /* Since the pause result bits seem to in different positions on
+ * different chips. look at registers.
+ */
+ if (hw->flags & SKY2_HW_FIBRE_PHY) {
+ /* Shift for bits in fiber PHY */
+ advert &= ~(ADVERTISE_PAUSE_CAP|ADVERTISE_PAUSE_ASYM);
+ lpa &= ~(LPA_PAUSE_CAP|LPA_PAUSE_ASYM);
+
+ if (advert & ADVERTISE_1000XPAUSE)
+ advert |= ADVERTISE_PAUSE_CAP;
+ if (advert & ADVERTISE_1000XPSE_ASYM)
+ advert |= ADVERTISE_PAUSE_ASYM;
+ if (lpa & LPA_1000XPAUSE)
+ lpa |= LPA_PAUSE_CAP;
+ if (lpa & LPA_1000XPAUSE_ASYM)
+ lpa |= LPA_PAUSE_ASYM;
+ }
+
+ sky2->flow_status = FC_NONE;
+ if (advert & ADVERTISE_PAUSE_CAP) {
+ if (lpa & LPA_PAUSE_CAP)
+ sky2->flow_status = FC_BOTH;
+ else if (advert & ADVERTISE_PAUSE_ASYM)
+ sky2->flow_status = FC_RX;
+ } else if (advert & ADVERTISE_PAUSE_ASYM) {
+ if ((lpa & LPA_PAUSE_CAP) && (lpa & LPA_PAUSE_ASYM))
+ sky2->flow_status = FC_TX;
+ }
+
+ if (sky2->duplex == DUPLEX_HALF && sky2->speed < SPEED_1000 &&
+ !(hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX))
+ sky2->flow_status = FC_NONE;
+
+ if (sky2->flow_status & FC_TX)
+ sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
+ else
+ sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
+
+ return 0;
+}
+
+/* Interrupt from PHY */
+static void sky2_phy_intr(struct sky2_hw *hw, unsigned port)
+{
+ struct net_device *dev = hw->dev[port];
+ struct sky2_port *sky2 = netdev_priv(dev);
+ u16 istatus, phystat;
+
+ if (!netif_running(dev))
+ return;
+
+ spin_lock(&sky2->phy_lock);
+ istatus = gm_phy_read(hw, port, PHY_MARV_INT_STAT);
+ phystat = gm_phy_read(hw, port, PHY_MARV_PHY_STAT);
+
+ netif_info(sky2, intr, sky2->netdev, "phy interrupt status 0x%x 0x%x\n",
+ istatus, phystat);
+
+ if (istatus & PHY_M_IS_AN_COMPL) {
+ if (sky2_autoneg_done(sky2, phystat) == 0 &&
+ !netif_carrier_ok(dev))
+ sky2_link_up(sky2);
+ goto out;
+ }
+
+ if (istatus & PHY_M_IS_LSP_CHANGE)
+ sky2->speed = sky2_phy_speed(hw, phystat);
+
+ if (istatus & PHY_M_IS_DUP_CHANGE)
+ sky2->duplex =
+ (phystat & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
+
+ if (istatus & PHY_M_IS_LST_CHANGE) {
+ if (phystat & PHY_M_PS_LINK_UP)
+ sky2_link_up(sky2);
+ else
+ sky2_link_down(sky2);
+ }
+out:
+ spin_unlock(&sky2->phy_lock);
+}
+
+/* Special quick link interrupt (Yukon-2 Optima only) */
+static void sky2_qlink_intr(struct sky2_hw *hw)
+{
+ struct sky2_port *sky2 = netdev_priv(hw->dev[0]);
+ u32 imask;
+ u16 phy;
+
+ /* disable irq */
+ imask = sky2_read32(hw, B0_IMSK);
+ imask &= ~Y2_IS_PHY_QLNK;
+ sky2_write32(hw, B0_IMSK, imask);
+
+ /* reset PHY Link Detect */
+ phy = sky2_pci_read16(hw, PSM_CONFIG_REG4);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+ sky2_pci_write16(hw, PSM_CONFIG_REG4, phy | 1);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+
+ sky2_link_up(sky2);
+}
+
+/* Transmit timeout is only called if we are running, carrier is up
+ * and tx queue is full (stopped).
+ */
+static void sky2_tx_timeout(struct net_device *dev)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+
+ netif_err(sky2, timer, dev, "tx timeout\n");
+
+ netdev_printk(KERN_DEBUG, dev, "transmit ring %u .. %u report=%u done=%u\n",
+ sky2->tx_cons, sky2->tx_prod,
+ sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
+ sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE)));
+
+ /* can't restart safely under softirq */
+ schedule_work(&hw->restart_work);
+}
+
+static int sky2_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ int err;
+ u16 ctl, mode;
+ u32 imask;
+
+ /* MTU size outside the spec */
+ if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
+ return -EINVAL;
+
+ /* MTU > 1500 on yukon FE and FE+ not allowed */
+ if (new_mtu > ETH_DATA_LEN &&
+ (hw->chip_id == CHIP_ID_YUKON_FE ||
+ hw->chip_id == CHIP_ID_YUKON_FE_P))
+ return -EINVAL;
+
+ if (!netif_running(dev)) {
+ dev->mtu = new_mtu;
+ netdev_update_features(dev);
+ return 0;
+ }
+
+ imask = sky2_read32(hw, B0_IMSK);
+ sky2_write32(hw, B0_IMSK, 0);
+ sky2_read32(hw, B0_IMSK);
+
+ dev->trans_start = jiffies; /* prevent tx timeout */
+ napi_disable(&hw->napi);
+ netif_tx_disable(dev);
+
+ synchronize_irq(hw->pdev->irq);
+
+ if (!(hw->flags & SKY2_HW_RAM_BUFFER))
+ sky2_set_tx_stfwd(hw, port);
+
+ ctl = gma_read16(hw, port, GM_GP_CTRL);
+ gma_write16(hw, port, GM_GP_CTRL, ctl & ~GM_GPCR_RX_ENA);
+ sky2_rx_stop(sky2);
+ sky2_rx_clean(sky2);
+
+ dev->mtu = new_mtu;
+ netdev_update_features(dev);
+
+ mode = DATA_BLIND_VAL(DATA_BLIND_DEF) | GM_SMOD_VLAN_ENA;
+ if (sky2->speed > SPEED_100)
+ mode |= IPG_DATA_VAL(IPG_DATA_DEF_1000);
+ else
+ mode |= IPG_DATA_VAL(IPG_DATA_DEF_10_100);
+
+ if (dev->mtu > ETH_DATA_LEN)
+ mode |= GM_SMOD_JUMBO_ENA;
+
+ gma_write16(hw, port, GM_SERIAL_MODE, mode);
+
+ sky2_write8(hw, RB_ADDR(rxqaddr[port], RB_CTRL), RB_ENA_OP_MD);
+
+ err = sky2_alloc_rx_skbs(sky2);
+ if (!err)
+ sky2_rx_start(sky2);
+ else
+ sky2_rx_clean(sky2);
+ sky2_write32(hw, B0_IMSK, imask);
+
+ sky2_read32(hw, B0_Y2_SP_LISR);
+ napi_enable(&hw->napi);
+
+ if (err)
+ dev_close(dev);
+ else {
+ gma_write16(hw, port, GM_GP_CTRL, ctl);
+
+ netif_wake_queue(dev);
+ }
+
+ return err;
+}
+
+static inline bool needs_copy(const struct rx_ring_info *re,
+ unsigned length)
+{
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+ /* Some architectures need the IP header to be aligned */
+ if (!IS_ALIGNED(re->data_addr + ETH_HLEN, sizeof(u32)))
+ return true;
+#endif
+ return length < copybreak;
+}
+
+/* For small just reuse existing skb for next receive */
+static struct sk_buff *receive_copy(struct sky2_port *sky2,
+ const struct rx_ring_info *re,
+ unsigned length)
+{
+ struct sk_buff *skb;
+
+ skb = netdev_alloc_skb_ip_align(sky2->netdev, length);
+ if (likely(skb)) {
+ pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->data_addr,
+ length, PCI_DMA_FROMDEVICE);
+ skb_copy_from_linear_data(re->skb, skb->data, length);
+ skb->ip_summed = re->skb->ip_summed;
+ skb->csum = re->skb->csum;
+ skb_copy_hash(skb, re->skb);
+ skb->vlan_proto = re->skb->vlan_proto;
+ skb->vlan_tci = re->skb->vlan_tci;
+
+ pci_dma_sync_single_for_device(sky2->hw->pdev, re->data_addr,
+ length, PCI_DMA_FROMDEVICE);
+ re->skb->vlan_proto = 0;
+ re->skb->vlan_tci = 0;
+ skb_clear_hash(re->skb);
+ re->skb->ip_summed = CHECKSUM_NONE;
+ skb_put(skb, length);
+ }
+ return skb;
+}
+
+/* Adjust length of skb with fragments to match received data */
+static void skb_put_frags(struct sk_buff *skb, unsigned int hdr_space,
+ unsigned int length)
+{
+ int i, num_frags;
+ unsigned int size;
+
+ /* put header into skb */
+ size = min(length, hdr_space);
+ skb->tail += size;
+ skb->len += size;
+ length -= size;
+
+ num_frags = skb_shinfo(skb)->nr_frags;
+ for (i = 0; i < num_frags; i++) {
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+
+ if (length == 0) {
+ /* don't need this page */
+ __skb_frag_unref(frag);
+ --skb_shinfo(skb)->nr_frags;
+ } else {
+ size = min(length, (unsigned) PAGE_SIZE);
+
+ skb_frag_size_set(frag, size);
+ skb->data_len += size;
+ skb->truesize += PAGE_SIZE;
+ skb->len += size;
+ length -= size;
+ }
+ }
+}
+
+/* Normal packet - take skb from ring element and put in a new one */
+static struct sk_buff *receive_new(struct sky2_port *sky2,
+ struct rx_ring_info *re,
+ unsigned int length)
+{
+ struct sk_buff *skb;
+ struct rx_ring_info nre;
+ unsigned hdr_space = sky2->rx_data_size;
+
+ nre.skb = sky2_rx_alloc(sky2, GFP_ATOMIC);
+ if (unlikely(!nre.skb))
+ goto nobuf;
+
+ if (sky2_rx_map_skb(sky2->hw->pdev, &nre, hdr_space))
+ goto nomap;
+
+ skb = re->skb;
+ sky2_rx_unmap_skb(sky2->hw->pdev, re);
+ prefetch(skb->data);
+ *re = nre;
+
+ if (skb_shinfo(skb)->nr_frags)
+ skb_put_frags(skb, hdr_space, length);
+ else
+ skb_put(skb, length);
+ return skb;
+
+nomap:
+ dev_kfree_skb(nre.skb);
+nobuf:
+ return NULL;
+}
+
+/*
+ * Receive one packet.
+ * For larger packets, get new buffer.
+ */
+static struct sk_buff *sky2_receive(struct net_device *dev,
+ u16 length, u32 status)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct rx_ring_info *re = sky2->rx_ring + sky2->rx_next;
+ struct sk_buff *skb = NULL;
+ u16 count = (status & GMR_FS_LEN) >> 16;
+
+ netif_printk(sky2, rx_status, KERN_DEBUG, dev,
+ "rx slot %u status 0x%x len %d\n",
+ sky2->rx_next, status, length);
+
+ sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending;
+ prefetch(sky2->rx_ring + sky2->rx_next);
+
+ if (skb_vlan_tag_present(re->skb))
+ count -= VLAN_HLEN; /* Account for vlan tag */
+
+ /* This chip has hardware problems that generates bogus status.
+ * So do only marginal checking and expect higher level protocols
+ * to handle crap frames.
+ */
+ if (sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
+ sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0 &&
+ length != count)
+ goto okay;
+
+ if (status & GMR_FS_ANY_ERR)
+ goto error;
+
+ if (!(status & GMR_FS_RX_OK))
+ goto resubmit;
+
+ /* if length reported by DMA does not match PHY, packet was truncated */
+ if (length != count)
+ goto error;
+
+okay:
+ if (needs_copy(re, length))
+ skb = receive_copy(sky2, re, length);
+ else
+ skb = receive_new(sky2, re, length);
+
+ dev->stats.rx_dropped += (skb == NULL);
+
+resubmit:
+ sky2_rx_submit(sky2, re);
+
+ return skb;
+
+error:
+ ++dev->stats.rx_errors;
+
+ if (net_ratelimit())
+ netif_info(sky2, rx_err, dev,
+ "rx error, status 0x%x length %d\n", status, length);
+
+ goto resubmit;
+}
+
+/* Transmit complete */
+static inline void sky2_tx_done(struct net_device *dev, u16 last)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ if (netif_running(dev)) {
+ sky2_tx_complete(sky2, last);
+
+ /* Wake unless it's detached, and called e.g. from sky2_close() */
+ if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
+ netif_wake_queue(dev);
+ }
+}
+
+static inline void sky2_skb_rx(const struct sky2_port *sky2,
+ struct sk_buff *skb)
+{
+ if (skb->ip_summed == CHECKSUM_NONE)
+ netif_receive_skb(skb);
+ else
+ napi_gro_receive(&sky2->hw->napi, skb);
+}
+
+static inline void sky2_rx_done(struct sky2_hw *hw, unsigned port,
+ unsigned packets, unsigned bytes)
+{
+ struct net_device *dev = hw->dev[port];
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ if (packets == 0)
+ return;
+
+ u64_stats_update_begin(&sky2->rx_stats.syncp);
+ sky2->rx_stats.packets += packets;
+ sky2->rx_stats.bytes += bytes;
+ u64_stats_update_end(&sky2->rx_stats.syncp);
+
+ dev->last_rx = jiffies;
+ sky2_rx_update(netdev_priv(dev), rxqaddr[port]);
+}
+
+static void sky2_rx_checksum(struct sky2_port *sky2, u32 status)
+{
+ /* If this happens then driver assuming wrong format for chip type */
+ BUG_ON(sky2->hw->flags & SKY2_HW_NEW_LE);
+
+ /* Both checksum counters are programmed to start at
+ * the same offset, so unless there is a problem they
+ * should match. This failure is an early indication that
+ * hardware receive checksumming won't work.
+ */
+ if (likely((u16)(status >> 16) == (u16)status)) {
+ struct sk_buff *skb = sky2->rx_ring[sky2->rx_next].skb;
+ skb->ip_summed = CHECKSUM_COMPLETE;
+ skb->csum = le16_to_cpu(status);
+ } else {
+ dev_notice(&sky2->hw->pdev->dev,
+ "%s: receive checksum problem (status = %#x)\n",
+ sky2->netdev->name, status);
+
+ /* Disable checksum offload
+ * It will be reenabled on next ndo_set_features, but if it's
+ * really broken, will get disabled again
+ */
+ sky2->netdev->features &= ~NETIF_F_RXCSUM;
+ sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
+ BMU_DIS_RX_CHKSUM);
+ }
+}
+
+static void sky2_rx_tag(struct sky2_port *sky2, u16 length)
+{
+ struct sk_buff *skb;
+
+ skb = sky2->rx_ring[sky2->rx_next].skb;
+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), be16_to_cpu(length));
+}
+
+static void sky2_rx_hash(struct sky2_port *sky2, u32 status)
+{
+ struct sk_buff *skb;
+
+ skb = sky2->rx_ring[sky2->rx_next].skb;
+ skb_set_hash(skb, le32_to_cpu(status), PKT_HASH_TYPE_L3);
+}
+
+/* Process status response ring */
+static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
+{
+ int work_done = 0;
+ unsigned int total_bytes[2] = { 0 };
+ unsigned int total_packets[2] = { 0 };
+
+ if (to_do <= 0)
+ return work_done;
+
+ rmb();
+ do {
+ struct sky2_port *sky2;
+ struct sky2_status_le *le = hw->st_le + hw->st_idx;
+ unsigned port;
+ struct net_device *dev;
+ struct sk_buff *skb;
+ u32 status;
+ u16 length;
+ u8 opcode = le->opcode;
+
+ if (!(opcode & HW_OWNER))
+ break;
+
+ hw->st_idx = RING_NEXT(hw->st_idx, hw->st_size);
+
+ port = le->css & CSS_LINK_BIT;
+ dev = hw->dev[port];
+ sky2 = netdev_priv(dev);
+ length = le16_to_cpu(le->length);
+ status = le32_to_cpu(le->status);
+
+ le->opcode = 0;
+ switch (opcode & ~HW_OWNER) {
+ case OP_RXSTAT:
+ total_packets[port]++;
+ total_bytes[port] += length;
+
+ skb = sky2_receive(dev, length, status);
+ if (!skb)
+ break;
+
+ /* This chip reports checksum status differently */
+ if (hw->flags & SKY2_HW_NEW_LE) {
+ if ((dev->features & NETIF_F_RXCSUM) &&
+ (le->css & (CSS_ISIPV4 | CSS_ISIPV6)) &&
+ (le->css & CSS_TCPUDPCSOK))
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ else
+ skb->ip_summed = CHECKSUM_NONE;
+ }
+
+ skb->protocol = eth_type_trans(skb, dev);
+ sky2_skb_rx(sky2, skb);
+
+ /* Stop after net poll weight */
+ if (++work_done >= to_do)
+ goto exit_loop;
+ break;
+
+ case OP_RXVLAN:
+ sky2_rx_tag(sky2, length);
+ break;
+
+ case OP_RXCHKSVLAN:
+ sky2_rx_tag(sky2, length);
+ /* fall through */
+ case OP_RXCHKS:
+ if (likely(dev->features & NETIF_F_RXCSUM))
+ sky2_rx_checksum(sky2, status);
+ break;
+
+ case OP_RSS_HASH:
+ sky2_rx_hash(sky2, status);
+ break;
+
+ case OP_TXINDEXLE:
+ /* TX index reports status for both ports */
+ sky2_tx_done(hw->dev[0], status & 0xfff);
+ if (hw->dev[1])
+ sky2_tx_done(hw->dev[1],
+ ((status >> 24) & 0xff)
+ | (u16)(length & 0xf) << 8);
+ break;
+
+ default:
+ if (net_ratelimit())
+ pr_warn("unknown status opcode 0x%x\n", opcode);
+ }
+ } while (hw->st_idx != idx);
+
+ /* Fully processed status ring so clear irq */
+ sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
+
+exit_loop:
+ sky2_rx_done(hw, 0, total_packets[0], total_bytes[0]);
+ sky2_rx_done(hw, 1, total_packets[1], total_bytes[1]);
+
+ return work_done;
+}
+
+static void sky2_hw_error(struct sky2_hw *hw, unsigned port, u32 status)
+{
+ struct net_device *dev = hw->dev[port];
+
+ if (net_ratelimit())
+ netdev_info(dev, "hw error interrupt status 0x%x\n", status);
+
+ if (status & Y2_IS_PAR_RD1) {
+ if (net_ratelimit())
+ netdev_err(dev, "ram data read parity error\n");
+ /* Clear IRQ */
+ sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_RD_PERR);
+ }
+
+ if (status & Y2_IS_PAR_WR1) {
+ if (net_ratelimit())
+ netdev_err(dev, "ram data write parity error\n");
+
+ sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_WR_PERR);
+ }
+
+ if (status & Y2_IS_PAR_MAC1) {
+ if (net_ratelimit())
+ netdev_err(dev, "MAC parity error\n");
+ sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_PE);
+ }
+
+ if (status & Y2_IS_PAR_RX1) {
+ if (net_ratelimit())
+ netdev_err(dev, "RX parity error\n");
+ sky2_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), BMU_CLR_IRQ_PAR);
+ }
+
+ if (status & Y2_IS_TCP_TXA1) {
+ if (net_ratelimit())
+ netdev_err(dev, "TCP segmentation error\n");
+ sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_CLR_IRQ_TCP);
+ }
+}
+
+static void sky2_hw_intr(struct sky2_hw *hw)
+{
+ struct pci_dev *pdev = hw->pdev;
+ u32 status = sky2_read32(hw, B0_HWE_ISRC);
+ u32 hwmsk = sky2_read32(hw, B0_HWE_IMSK);
+
+ status &= hwmsk;
+
+ if (status & Y2_IS_TIST_OV)
+ sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
+
+ if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
+ u16 pci_err;
+
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+ pci_err = sky2_pci_read16(hw, PCI_STATUS);
+ if (net_ratelimit())
+ dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
+ pci_err);
+
+ sky2_pci_write16(hw, PCI_STATUS,
+ pci_err | PCI_STATUS_ERROR_BITS);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+ }
+
+ if (status & Y2_IS_PCI_EXP) {
+ /* PCI-Express uncorrectable Error occurred */
+ u32 err;
+
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+ err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
+ sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
+ 0xfffffffful);
+ if (net_ratelimit())
+ dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
+
+ sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+ }
+
+ if (status & Y2_HWE_L1_MASK)
+ sky2_hw_error(hw, 0, status);
+ status >>= 8;
+ if (status & Y2_HWE_L1_MASK)
+ sky2_hw_error(hw, 1, status);
+}
+
+static void sky2_mac_intr(struct sky2_hw *hw, unsigned port)
+{
+ struct net_device *dev = hw->dev[port];
+ struct sky2_port *sky2 = netdev_priv(dev);
+ u8 status = sky2_read8(hw, SK_REG(port, GMAC_IRQ_SRC));
+
+ netif_info(sky2, intr, dev, "mac interrupt status 0x%x\n", status);
+
+ if (status & GM_IS_RX_CO_OV)
+ gma_read16(hw, port, GM_RX_IRQ_SRC);
+
+ if (status & GM_IS_TX_CO_OV)
+ gma_read16(hw, port, GM_TX_IRQ_SRC);
+
+ if (status & GM_IS_RX_FF_OR) {
+ ++dev->stats.rx_fifo_errors;
+ sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_CLI_RX_FO);
+ }
+
+ if (status & GM_IS_TX_FF_UR) {
+ ++dev->stats.tx_fifo_errors;
+ sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_FU);
+ }
+}
+
+/* This should never happen it is a bug. */
+static void sky2_le_error(struct sky2_hw *hw, unsigned port, u16 q)
+{
+ struct net_device *dev = hw->dev[port];
+ u16 idx = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_GET_IDX));
+
+ dev_err(&hw->pdev->dev, "%s: descriptor error q=%#x get=%u put=%u\n",
+ dev->name, (unsigned) q, (unsigned) idx,
+ (unsigned) sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX)));
+
+ sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_IRQ_CHK);
+}
+
+static int sky2_rx_hung(struct net_device *dev)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ unsigned rxq = rxqaddr[port];
+ u32 mac_rp = sky2_read32(hw, SK_REG(port, RX_GMF_RP));
+ u8 mac_lev = sky2_read8(hw, SK_REG(port, RX_GMF_RLEV));
+ u8 fifo_rp = sky2_read8(hw, Q_ADDR(rxq, Q_RP));
+ u8 fifo_lev = sky2_read8(hw, Q_ADDR(rxq, Q_RL));
+
+ /* If idle and MAC or PCI is stuck */
+ if (sky2->check.last == dev->last_rx &&
+ ((mac_rp == sky2->check.mac_rp &&
+ mac_lev != 0 && mac_lev >= sky2->check.mac_lev) ||
+ /* Check if the PCI RX hang */
+ (fifo_rp == sky2->check.fifo_rp &&
+ fifo_lev != 0 && fifo_lev >= sky2->check.fifo_lev))) {
+ netdev_printk(KERN_DEBUG, dev,
+ "hung mac %d:%d fifo %d (%d:%d)\n",
+ mac_lev, mac_rp, fifo_lev,
+ fifo_rp, sky2_read8(hw, Q_ADDR(rxq, Q_WP)));
+ return 1;
+ } else {
+ sky2->check.last = dev->last_rx;
+ sky2->check.mac_rp = mac_rp;
+ sky2->check.mac_lev = mac_lev;
+ sky2->check.fifo_rp = fifo_rp;
+ sky2->check.fifo_lev = fifo_lev;
+ return 0;
+ }
+}
+
+static void sky2_watchdog(unsigned long arg)
+{
+ struct sky2_hw *hw = (struct sky2_hw *) arg;
+
+ /* Check for lost IRQ once a second */
+ if (sky2_read32(hw, B0_ISRC)) {
+ napi_schedule(&hw->napi);
+ } else {
+ int i, active = 0;
+
+ for (i = 0; i < hw->ports; i++) {
+ struct net_device *dev = hw->dev[i];
+ if (!netif_running(dev))
+ continue;
+ ++active;
+
+ /* For chips with Rx FIFO, check if stuck */
+ if ((hw->flags & SKY2_HW_RAM_BUFFER) &&
+ sky2_rx_hung(dev)) {
+ netdev_info(dev, "receiver hang detected\n");
+ schedule_work(&hw->restart_work);
+ return;
+ }
+ }
+
+ if (active == 0)
+ return;
+ }
+
+ mod_timer(&hw->watchdog_timer, round_jiffies(jiffies + HZ));
+}
+
+/* Hardware/software error handling */
+static void sky2_err_intr(struct sky2_hw *hw, u32 status)
+{
+ if (net_ratelimit())
+ dev_warn(&hw->pdev->dev, "error interrupt status=%#x\n", status);
+
+ if (status & Y2_IS_HW_ERR)
+ sky2_hw_intr(hw);
+
+ if (status & Y2_IS_IRQ_MAC1)
+ sky2_mac_intr(hw, 0);
+
+ if (status & Y2_IS_IRQ_MAC2)
+ sky2_mac_intr(hw, 1);
+
+ if (status & Y2_IS_CHK_RX1)
+ sky2_le_error(hw, 0, Q_R1);
+
+ if (status & Y2_IS_CHK_RX2)
+ sky2_le_error(hw, 1, Q_R2);
+
+ if (status & Y2_IS_CHK_TXA1)
+ sky2_le_error(hw, 0, Q_XA1);
+
+ if (status & Y2_IS_CHK_TXA2)
+ sky2_le_error(hw, 1, Q_XA2);
+}
+
+static int sky2_poll(struct napi_struct *napi, int work_limit)
+{
+ struct sky2_hw *hw = container_of(napi, struct sky2_hw, napi);
+ u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
+ int work_done = 0;
+ u16 idx;
+
+ if (unlikely(status & Y2_IS_ERROR))
+ sky2_err_intr(hw, status);
+
+ if (status & Y2_IS_IRQ_PHY1)
+ sky2_phy_intr(hw, 0);
+
+ if (status & Y2_IS_IRQ_PHY2)
+ sky2_phy_intr(hw, 1);
+
+ if (status & Y2_IS_PHY_QLNK)
+ sky2_qlink_intr(hw);
+
+ while ((idx = sky2_read16(hw, STAT_PUT_IDX)) != hw->st_idx) {
+ work_done += sky2_status_intr(hw, work_limit - work_done, idx);
+
+ if (work_done >= work_limit)
+ goto done;
+ }
+
+ napi_complete(napi);
+ sky2_read32(hw, B0_Y2_SP_LISR);
+done:
+
+ return work_done;
+}
+
+static irqreturn_t sky2_intr(int irq, void *dev_id)
+{
+ struct sky2_hw *hw = dev_id;
+ u32 status;
+
+ /* Reading this mask interrupts as side effect */
+ status = sky2_read32(hw, B0_Y2_SP_ISRC2);
+ if (status == 0 || status == ~0) {
+ sky2_write32(hw, B0_Y2_SP_ICR, 2);
+ return IRQ_NONE;
+ }
+
+ prefetch(&hw->st_le[hw->st_idx]);
+
+ napi_schedule(&hw->napi);
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void sky2_netpoll(struct net_device *dev)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ napi_schedule(&sky2->hw->napi);
+}
+#endif
+
+/* Chip internal frequency for clock calculations */
+static u32 sky2_mhz(const struct sky2_hw *hw)
+{
+ switch (hw->chip_id) {
+ case CHIP_ID_YUKON_EC:
+ case CHIP_ID_YUKON_EC_U:
+ case CHIP_ID_YUKON_EX:
+ case CHIP_ID_YUKON_SUPR:
+ case CHIP_ID_YUKON_UL_2:
+ case CHIP_ID_YUKON_OPT:
+ case CHIP_ID_YUKON_PRM:
+ case CHIP_ID_YUKON_OP_2:
+ return 125;
+
+ case CHIP_ID_YUKON_FE:
+ return 100;
+
+ case CHIP_ID_YUKON_FE_P:
+ return 50;
+
+ case CHIP_ID_YUKON_XL:
+ return 156;
+
+ default:
+ BUG();
+ }
+}
+
+static inline u32 sky2_us2clk(const struct sky2_hw *hw, u32 us)
+{
+ return sky2_mhz(hw) * us;
+}
+
+static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk)
+{
+ return clk / sky2_mhz(hw);
+}
+
+
+static int sky2_init(struct sky2_hw *hw)
+{
+ u8 t8;
+
+ /* Enable all clocks and check for bad PCI access */
+ sky2_pci_write32(hw, PCI_DEV_REG3, 0);
+
+ sky2_write8(hw, B0_CTST, CS_RST_CLR);
+
+ hw->chip_id = sky2_read8(hw, B2_CHIP_ID);
+ hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4;
+
+ switch (hw->chip_id) {
+ case CHIP_ID_YUKON_XL:
+ hw->flags = SKY2_HW_GIGABIT | SKY2_HW_NEWER_PHY;
+ if (hw->chip_rev < CHIP_REV_YU_XL_A2)
+ hw->flags |= SKY2_HW_RSS_BROKEN;
+ break;
+
+ case CHIP_ID_YUKON_EC_U:
+ hw->flags = SKY2_HW_GIGABIT
+ | SKY2_HW_NEWER_PHY
+ | SKY2_HW_ADV_POWER_CTL;
+ break;
+
+ case CHIP_ID_YUKON_EX:
+ hw->flags = SKY2_HW_GIGABIT
+ | SKY2_HW_NEWER_PHY
+ | SKY2_HW_NEW_LE
+ | SKY2_HW_ADV_POWER_CTL
+ | SKY2_HW_RSS_CHKSUM;
+
+ /* New transmit checksum */
+ if (hw->chip_rev != CHIP_REV_YU_EX_B0)
+ hw->flags |= SKY2_HW_AUTO_TX_SUM;
+ break;
+
+ case CHIP_ID_YUKON_EC:
+ /* This rev is really old, and requires untested workarounds */
+ if (hw->chip_rev == CHIP_REV_YU_EC_A1) {
+ dev_err(&hw->pdev->dev, "unsupported revision Yukon-EC rev A1\n");
+ return -EOPNOTSUPP;
+ }
+ hw->flags = SKY2_HW_GIGABIT | SKY2_HW_RSS_BROKEN;
+ break;
+
+ case CHIP_ID_YUKON_FE:
+ hw->flags = SKY2_HW_RSS_BROKEN;
+ break;
+
+ case CHIP_ID_YUKON_FE_P:
+ hw->flags = SKY2_HW_NEWER_PHY
+ | SKY2_HW_NEW_LE
+ | SKY2_HW_AUTO_TX_SUM
+ | SKY2_HW_ADV_POWER_CTL;
+
+ /* The workaround for status conflicts VLAN tag detection. */
+ if (hw->chip_rev == CHIP_REV_YU_FE2_A0)
+ hw->flags |= SKY2_HW_VLAN_BROKEN | SKY2_HW_RSS_CHKSUM;
+ break;
+
+ case CHIP_ID_YUKON_SUPR:
+ hw->flags = SKY2_HW_GIGABIT
+ | SKY2_HW_NEWER_PHY
+ | SKY2_HW_NEW_LE
+ | SKY2_HW_AUTO_TX_SUM
+ | SKY2_HW_ADV_POWER_CTL;
+
+ if (hw->chip_rev == CHIP_REV_YU_SU_A0)
+ hw->flags |= SKY2_HW_RSS_CHKSUM;
+ break;
+
+ case CHIP_ID_YUKON_UL_2:
+ hw->flags = SKY2_HW_GIGABIT
+ | SKY2_HW_ADV_POWER_CTL;
+ break;
+
+ case CHIP_ID_YUKON_OPT:
+ case CHIP_ID_YUKON_PRM:
+ case CHIP_ID_YUKON_OP_2:
+ hw->flags = SKY2_HW_GIGABIT
+ | SKY2_HW_NEW_LE
+ | SKY2_HW_ADV_POWER_CTL;
+ break;
+
+ default:
+ dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n",
+ hw->chip_id);
+ return -EOPNOTSUPP;
+ }
+
+ hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
+ if (hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P')
+ hw->flags |= SKY2_HW_FIBRE_PHY;
+
+ hw->ports = 1;
+ t8 = sky2_read8(hw, B2_Y2_HW_RES);
+ if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
+ if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC))
+ ++hw->ports;
+ }
+
+ if (sky2_read8(hw, B2_E_0))
+ hw->flags |= SKY2_HW_RAM_BUFFER;
+
+ return 0;
+}
+
+static void sky2_reset(struct sky2_hw *hw)
+{
+ struct pci_dev *pdev = hw->pdev;
+ u16 status;
+ int i;
+ u32 hwe_mask = Y2_HWE_ALL_MASK;
+
+ /* disable ASF */
+ if (hw->chip_id == CHIP_ID_YUKON_EX
+ || hw->chip_id == CHIP_ID_YUKON_SUPR) {
+ sky2_write32(hw, CPU_WDOG, 0);
+ status = sky2_read16(hw, HCU_CCSR);
+ status &= ~(HCU_CCSR_AHB_RST | HCU_CCSR_CPU_RST_MODE |
+ HCU_CCSR_UC_STATE_MSK);
+ /*
+ * CPU clock divider shouldn't be used because
+ * - ASF firmware may malfunction
+ * - Yukon-Supreme: Parallel FLASH doesn't support divided clocks
+ */
+ status &= ~HCU_CCSR_CPU_CLK_DIVIDE_MSK;
+ sky2_write16(hw, HCU_CCSR, status);
+ sky2_write32(hw, CPU_WDOG, 0);
+ } else
+ sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
+ sky2_write16(hw, B0_CTST, Y2_ASF_DISABLE);
+
+ /* do a SW reset */
+ sky2_write8(hw, B0_CTST, CS_RST_SET);
+ sky2_write8(hw, B0_CTST, CS_RST_CLR);
+
+ /* allow writes to PCI config */
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+
+ /* clear PCI errors, if any */
+ status = sky2_pci_read16(hw, PCI_STATUS);
+ status |= PCI_STATUS_ERROR_BITS;
+ sky2_pci_write16(hw, PCI_STATUS, status);
+
+ sky2_write8(hw, B0_CTST, CS_MRST_CLR);
+
+ if (pci_is_pcie(pdev)) {
+ sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
+ 0xfffffffful);
+
+ /* If error bit is stuck on ignore it */
+ if (sky2_read32(hw, B0_HWE_ISRC) & Y2_IS_PCI_EXP)
+ dev_info(&pdev->dev, "ignoring stuck error report bit\n");
+ else
+ hwe_mask |= Y2_IS_PCI_EXP;
+ }
+
+ sky2_power_on(hw);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+
+ for (i = 0; i < hw->ports; i++) {
+ sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
+ sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
+
+ if (hw->chip_id == CHIP_ID_YUKON_EX ||
+ hw->chip_id == CHIP_ID_YUKON_SUPR)
+ sky2_write16(hw, SK_REG(i, GMAC_CTRL),
+ GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON
+ | GMC_BYP_RETR_ON);
+
+ }
+
+ if (hw->chip_id == CHIP_ID_YUKON_SUPR && hw->chip_rev > CHIP_REV_YU_SU_B0) {
+ /* enable MACSec clock gating */
+ sky2_pci_write32(hw, PCI_DEV_REG3, P_CLK_MACSEC_DIS);
+ }
+
+ if (hw->chip_id == CHIP_ID_YUKON_OPT ||
+ hw->chip_id == CHIP_ID_YUKON_PRM ||
+ hw->chip_id == CHIP_ID_YUKON_OP_2) {
+ u16 reg;
+
+ if (hw->chip_id == CHIP_ID_YUKON_OPT && hw->chip_rev == 0) {
+ /* disable PCI-E PHY power down (set PHY reg 0x80, bit 7 */
+ sky2_write32(hw, Y2_PEX_PHY_DATA, (0x80UL << 16) | (1 << 7));
+
+ /* set PHY Link Detect Timer to 1.1 second (11x 100ms) */
+ reg = 10;
+
+ /* re-enable PEX PM in PEX PHY debug reg. 8 (clear bit 12) */
+ sky2_write32(hw, Y2_PEX_PHY_DATA, PEX_DB_ACCESS | (0x08UL << 16));
+ } else {
+ /* set PHY Link Detect Timer to 0.4 second (4x 100ms) */
+ reg = 3;
+ }
+
+ reg <<= PSM_CONFIG_REG4_TIMER_PHY_LINK_DETECT_BASE;
+ reg |= PSM_CONFIG_REG4_RST_PHY_LINK_DETECT;
+
+ /* reset PHY Link Detect */
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+ sky2_pci_write16(hw, PSM_CONFIG_REG4, reg);
+
+ /* check if PSMv2 was running before */
+ reg = sky2_pci_read16(hw, PSM_CONFIG_REG3);
+ if (reg & PCI_EXP_LNKCTL_ASPMC)
+ /* restore the PCIe Link Control register */
+ sky2_pci_write16(hw, pdev->pcie_cap + PCI_EXP_LNKCTL,
+ reg);
+
+ if (hw->chip_id == CHIP_ID_YUKON_PRM &&
+ hw->chip_rev == CHIP_REV_YU_PRM_A0) {
+ /* change PHY Interrupt polarity to low active */
+ reg = sky2_read16(hw, GPHY_CTRL);
+ sky2_write16(hw, GPHY_CTRL, reg | GPC_INTPOL);
+
+ /* adapt HW for low active PHY Interrupt */
+ reg = sky2_read16(hw, Y2_CFG_SPC + PCI_LDO_CTRL);
+ sky2_write16(hw, Y2_CFG_SPC + PCI_LDO_CTRL, reg | PHY_M_UNDOC1);
+ }
+
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+
+ /* re-enable PEX PM in PEX PHY debug reg. 8 (clear bit 12) */
+ sky2_write32(hw, Y2_PEX_PHY_DATA, PEX_DB_ACCESS | (0x08UL << 16));
+ }
+
+ /* Clear I2C IRQ noise */
+ sky2_write32(hw, B2_I2C_IRQ, 1);
+
+ /* turn off hardware timer (unused) */
+ sky2_write8(hw, B2_TI_CTRL, TIM_STOP);
+ sky2_write8(hw, B2_TI_CTRL, TIM_CLR_IRQ);
+
+ /* Turn off descriptor polling */
+ sky2_write32(hw, B28_DPT_CTRL, DPT_STOP);
+
+ /* Turn off receive timestamp */
+ sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_STOP);
+ sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
+
+ /* enable the Tx Arbiters */
+ for (i = 0; i < hw->ports; i++)
+ sky2_write8(hw, SK_REG(i, TXA_CTRL), TXA_ENA_ARB);
+
+ /* Initialize ram interface */
+ for (i = 0; i < hw->ports; i++) {
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_CTRL), RI_RST_CLR);
+
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R1), SK_RI_TO_53);
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA1), SK_RI_TO_53);
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS1), SK_RI_TO_53);
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R1), SK_RI_TO_53);
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA1), SK_RI_TO_53);
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS1), SK_RI_TO_53);
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R2), SK_RI_TO_53);
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA2), SK_RI_TO_53);
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS2), SK_RI_TO_53);
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R2), SK_RI_TO_53);
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA2), SK_RI_TO_53);
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS2), SK_RI_TO_53);
+ }
+
+ sky2_write32(hw, B0_HWE_IMSK, hwe_mask);
+
+ for (i = 0; i < hw->ports; i++)
+ sky2_gmac_reset(hw, i);
+
+ memset(hw->st_le, 0, hw->st_size * sizeof(struct sky2_status_le));
+ hw->st_idx = 0;
+
+ sky2_write32(hw, STAT_CTRL, SC_STAT_RST_SET);
+ sky2_write32(hw, STAT_CTRL, SC_STAT_RST_CLR);
+
+ sky2_write32(hw, STAT_LIST_ADDR_LO, hw->st_dma);
+ sky2_write32(hw, STAT_LIST_ADDR_HI, (u64) hw->st_dma >> 32);
+
+ /* Set the list last index */
+ sky2_write16(hw, STAT_LAST_IDX, hw->st_size - 1);
+
+ sky2_write16(hw, STAT_TX_IDX_TH, 10);
+ sky2_write8(hw, STAT_FIFO_WM, 16);
+
+ /* set Status-FIFO ISR watermark */
+ if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0)
+ sky2_write8(hw, STAT_FIFO_ISR_WM, 4);
+ else
+ sky2_write8(hw, STAT_FIFO_ISR_WM, 16);
+
+ sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000));
+ sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 20));
+ sky2_write32(hw, STAT_LEV_TIMER_INI, sky2_us2clk(hw, 100));
+
+ /* enable status unit */
+ sky2_write32(hw, STAT_CTRL, SC_STAT_OP_ON);
+
+ sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
+ sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
+ sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
+}
+
+/* Take device down (offline).
+ * Equivalent to doing dev_stop() but this does not
+ * inform upper layers of the transition.
+ */
+static void sky2_detach(struct net_device *dev)
+{
+ if (netif_running(dev)) {
+ netif_tx_lock(dev);
+ netif_device_detach(dev); /* stop txq */
+ netif_tx_unlock(dev);
+ sky2_close(dev);
+ }
+}
+
+/* Bring device back after doing sky2_detach */
+static int sky2_reattach(struct net_device *dev)
+{
+ int err = 0;
+
+ if (netif_running(dev)) {
+ err = sky2_open(dev);
+ if (err) {
+ netdev_info(dev, "could not restart %d\n", err);
+ dev_close(dev);
+ } else {
+ netif_device_attach(dev);
+ sky2_set_multicast(dev);
+ }
+ }
+
+ return err;
+}
+
+static void sky2_all_down(struct sky2_hw *hw)
+{
+ int i;
+
+ if (hw->flags & SKY2_HW_IRQ_SETUP) {
+ sky2_write32(hw, B0_IMSK, 0);
+ sky2_read32(hw, B0_IMSK);
+
+ synchronize_irq(hw->pdev->irq);
+ napi_disable(&hw->napi);
+ }
+
+ for (i = 0; i < hw->ports; i++) {
+ struct net_device *dev = hw->dev[i];
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ if (!netif_running(dev))
+ continue;
+
+ netif_carrier_off(dev);
+ netif_tx_disable(dev);
+ sky2_hw_down(sky2);
+ }
+}
+
+static void sky2_all_up(struct sky2_hw *hw)
+{
+ u32 imask = Y2_IS_BASE;
+ int i;
+
+ for (i = 0; i < hw->ports; i++) {
+ struct net_device *dev = hw->dev[i];
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ if (!netif_running(dev))
+ continue;
+
+ sky2_hw_up(sky2);
+ sky2_set_multicast(dev);
+ imask |= portirq_msk[i];
+ netif_wake_queue(dev);
+ }
+
+ if (hw->flags & SKY2_HW_IRQ_SETUP) {
+ sky2_write32(hw, B0_IMSK, imask);
+ sky2_read32(hw, B0_IMSK);
+ sky2_read32(hw, B0_Y2_SP_LISR);
+ napi_enable(&hw->napi);
+ }
+}
+
+static void sky2_restart(struct work_struct *work)
+{
+ struct sky2_hw *hw = container_of(work, struct sky2_hw, restart_work);
+
+ rtnl_lock();
+
+ sky2_all_down(hw);
+ sky2_reset(hw);
+ sky2_all_up(hw);
+
+ rtnl_unlock();
+}
+
+static inline u8 sky2_wol_supported(const struct sky2_hw *hw)
+{
+ return sky2_is_copper(hw) ? (WAKE_PHY | WAKE_MAGIC) : 0;
+}
+
+static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ const struct sky2_port *sky2 = netdev_priv(dev);
+
+ wol->supported = sky2_wol_supported(sky2->hw);
+ wol->wolopts = sky2->wol;
+}
+
+static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ bool enable_wakeup = false;
+ int i;
+
+ if ((wol->wolopts & ~sky2_wol_supported(sky2->hw)) ||
+ !device_can_wakeup(&hw->pdev->dev))
+ return -EOPNOTSUPP;
+
+ sky2->wol = wol->wolopts;
+
+ for (i = 0; i < hw->ports; i++) {
+ struct net_device *dev = hw->dev[i];
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ if (sky2->wol)
+ enable_wakeup = true;
+ }
+ device_set_wakeup_enable(&hw->pdev->dev, enable_wakeup);
+
+ return 0;
+}
+
+static u32 sky2_supported_modes(const struct sky2_hw *hw)
+{
+ if (sky2_is_copper(hw)) {
+ u32 modes = SUPPORTED_10baseT_Half
+ | SUPPORTED_10baseT_Full
+ | SUPPORTED_100baseT_Half
+ | SUPPORTED_100baseT_Full;
+
+ if (hw->flags & SKY2_HW_GIGABIT)
+ modes |= SUPPORTED_1000baseT_Half
+ | SUPPORTED_1000baseT_Full;
+ return modes;
+ } else
+ return SUPPORTED_1000baseT_Half
+ | SUPPORTED_1000baseT_Full;
+}
+
+static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+
+ ecmd->transceiver = XCVR_INTERNAL;
+ ecmd->supported = sky2_supported_modes(hw);
+ ecmd->phy_address = PHY_ADDR_MARV;
+ if (sky2_is_copper(hw)) {
+ ecmd->port = PORT_TP;
+ ethtool_cmd_speed_set(ecmd, sky2->speed);
+ ecmd->supported |= SUPPORTED_Autoneg | SUPPORTED_TP;
+ } else {
+ ethtool_cmd_speed_set(ecmd, SPEED_1000);
+ ecmd->port = PORT_FIBRE;
+ ecmd->supported |= SUPPORTED_Autoneg | SUPPORTED_FIBRE;
+ }
+
+ ecmd->advertising = sky2->advertising;
+ ecmd->autoneg = (sky2->flags & SKY2_FLAG_AUTO_SPEED)
+ ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+ ecmd->duplex = sky2->duplex;
+ return 0;
+}
+
+static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ const struct sky2_hw *hw = sky2->hw;
+ u32 supported = sky2_supported_modes(hw);
+
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ if (ecmd->advertising & ~supported)
+ return -EINVAL;
+
+ if (sky2_is_copper(hw))
+ sky2->advertising = ecmd->advertising |
+ ADVERTISED_TP |
+ ADVERTISED_Autoneg;
+ else
+ sky2->advertising = ecmd->advertising |
+ ADVERTISED_FIBRE |
+ ADVERTISED_Autoneg;
+
+ sky2->flags |= SKY2_FLAG_AUTO_SPEED;
+ sky2->duplex = -1;
+ sky2->speed = -1;
+ } else {
+ u32 setting;
+ u32 speed = ethtool_cmd_speed(ecmd);
+
+ switch (speed) {
+ case SPEED_1000:
+ if (ecmd->duplex == DUPLEX_FULL)
+ setting = SUPPORTED_1000baseT_Full;
+ else if (ecmd->duplex == DUPLEX_HALF)
+ setting = SUPPORTED_1000baseT_Half;
+ else
+ return -EINVAL;
+ break;
+ case SPEED_100:
+ if (ecmd->duplex == DUPLEX_FULL)
+ setting = SUPPORTED_100baseT_Full;
+ else if (ecmd->duplex == DUPLEX_HALF)
+ setting = SUPPORTED_100baseT_Half;
+ else
+ return -EINVAL;
+ break;
+
+ case SPEED_10:
+ if (ecmd->duplex == DUPLEX_FULL)
+ setting = SUPPORTED_10baseT_Full;
+ else if (ecmd->duplex == DUPLEX_HALF)
+ setting = SUPPORTED_10baseT_Half;
+ else
+ return -EINVAL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if ((setting & supported) == 0)
+ return -EINVAL;
+
+ sky2->speed = speed;
+ sky2->duplex = ecmd->duplex;
+ sky2->flags &= ~SKY2_FLAG_AUTO_SPEED;
+ }
+
+ if (netif_running(dev)) {
+ sky2_phy_reinit(sky2);
+ sky2_set_multicast(dev);
+ }
+
+ return 0;
+}
+
+static void sky2_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
+ strlcpy(info->version, DRV_VERSION, sizeof(info->version));
+ strlcpy(info->bus_info, pci_name(sky2->hw->pdev),
+ sizeof(info->bus_info));
+}
+
+static const struct sky2_stat {
+ char name[ETH_GSTRING_LEN];
+ u16 offset;
+} sky2_stats[] = {
+ { "tx_bytes", GM_TXO_OK_HI },
+ { "rx_bytes", GM_RXO_OK_HI },
+ { "tx_broadcast", GM_TXF_BC_OK },
+ { "rx_broadcast", GM_RXF_BC_OK },
+ { "tx_multicast", GM_TXF_MC_OK },
+ { "rx_multicast", GM_RXF_MC_OK },
+ { "tx_unicast", GM_TXF_UC_OK },
+ { "rx_unicast", GM_RXF_UC_OK },
+ { "tx_mac_pause", GM_TXF_MPAUSE },
+ { "rx_mac_pause", GM_RXF_MPAUSE },
+ { "collisions", GM_TXF_COL },
+ { "late_collision",GM_TXF_LAT_COL },
+ { "aborted", GM_TXF_ABO_COL },
+ { "single_collisions", GM_TXF_SNG_COL },
+ { "multi_collisions", GM_TXF_MUL_COL },
+
+ { "rx_short", GM_RXF_SHT },
+ { "rx_runt", GM_RXE_FRAG },
+ { "rx_64_byte_packets", GM_RXF_64B },
+ { "rx_65_to_127_byte_packets", GM_RXF_127B },
+ { "rx_128_to_255_byte_packets", GM_RXF_255B },
+ { "rx_256_to_511_byte_packets", GM_RXF_511B },
+ { "rx_512_to_1023_byte_packets", GM_RXF_1023B },
+ { "rx_1024_to_1518_byte_packets", GM_RXF_1518B },
+ { "rx_1518_to_max_byte_packets", GM_RXF_MAX_SZ },
+ { "rx_too_long", GM_RXF_LNG_ERR },
+ { "rx_fifo_overflow", GM_RXE_FIFO_OV },
+ { "rx_jabber", GM_RXF_JAB_PKT },
+ { "rx_fcs_error", GM_RXF_FCS_ERR },
+
+ { "tx_64_byte_packets", GM_TXF_64B },
+ { "tx_65_to_127_byte_packets", GM_TXF_127B },
+ { "tx_128_to_255_byte_packets", GM_TXF_255B },
+ { "tx_256_to_511_byte_packets", GM_TXF_511B },
+ { "tx_512_to_1023_byte_packets", GM_TXF_1023B },
+ { "tx_1024_to_1518_byte_packets", GM_TXF_1518B },
+ { "tx_1519_to_max_byte_packets", GM_TXF_MAX_SZ },
+ { "tx_fifo_underrun", GM_TXE_FIFO_UR },
+};
+
+static u32 sky2_get_msglevel(struct net_device *netdev)
+{
+ struct sky2_port *sky2 = netdev_priv(netdev);
+ return sky2->msg_enable;
+}
+
+static int sky2_nway_reset(struct net_device *dev)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ if (!netif_running(dev) || !(sky2->flags & SKY2_FLAG_AUTO_SPEED))
+ return -EINVAL;
+
+ sky2_phy_reinit(sky2);
+ sky2_set_multicast(dev);
+
+ return 0;
+}
+
+static void sky2_phy_stats(struct sky2_port *sky2, u64 * data, unsigned count)
+{
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ int i;
+
+ data[0] = get_stats64(hw, port, GM_TXO_OK_LO);
+ data[1] = get_stats64(hw, port, GM_RXO_OK_LO);
+
+ for (i = 2; i < count; i++)
+ data[i] = get_stats32(hw, port, sky2_stats[i].offset);
+}
+
+static void sky2_set_msglevel(struct net_device *netdev, u32 value)
+{
+ struct sky2_port *sky2 = netdev_priv(netdev);
+ sky2->msg_enable = value;
+}
+
+static int sky2_get_sset_count(struct net_device *dev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return ARRAY_SIZE(sky2_stats);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void sky2_get_ethtool_stats(struct net_device *dev,
+ struct ethtool_stats *stats, u64 * data)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ sky2_phy_stats(sky2, data, ARRAY_SIZE(sky2_stats));
+}
+
+static void sky2_get_strings(struct net_device *dev, u32 stringset, u8 * data)
+{
+ int i;
+
+ switch (stringset) {
+ case ETH_SS_STATS:
+ for (i = 0; i < ARRAY_SIZE(sky2_stats); i++)
+ memcpy(data + i * ETH_GSTRING_LEN,
+ sky2_stats[i].name, ETH_GSTRING_LEN);
+ break;
+ }
+}
+
+static int sky2_set_mac_address(struct net_device *dev, void *p)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ const struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
+ memcpy_toio(hw->regs + B2_MAC_1 + port * 8,
+ dev->dev_addr, ETH_ALEN);
+ memcpy_toio(hw->regs + B2_MAC_2 + port * 8,
+ dev->dev_addr, ETH_ALEN);
+
+ /* virtual address for data */
+ gma_set_addr(hw, port, GM_SRC_ADDR_2L, dev->dev_addr);
+
+ /* physical address: used for pause frames */
+ gma_set_addr(hw, port, GM_SRC_ADDR_1L, dev->dev_addr);
+
+ return 0;
+}
+
+static inline void sky2_add_filter(u8 filter[8], const u8 *addr)
+{
+ u32 bit;
+
+ bit = ether_crc(ETH_ALEN, addr) & 63;
+ filter[bit >> 3] |= 1 << (bit & 7);
+}
+
+static void sky2_set_multicast(struct net_device *dev)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ struct netdev_hw_addr *ha;
+ u16 reg;
+ u8 filter[8];
+ int rx_pause;
+ static const u8 pause_mc_addr[ETH_ALEN] = { 0x1, 0x80, 0xc2, 0x0, 0x0, 0x1 };
+
+ rx_pause = (sky2->flow_status == FC_RX || sky2->flow_status == FC_BOTH);
+ memset(filter, 0, sizeof(filter));
+
+ reg = gma_read16(hw, port, GM_RX_CTRL);
+ reg |= GM_RXCR_UCF_ENA;
+
+ if (dev->flags & IFF_PROMISC) /* promiscuous */
+ reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
+ else if (dev->flags & IFF_ALLMULTI)
+ memset(filter, 0xff, sizeof(filter));
+ else if (netdev_mc_empty(dev) && !rx_pause)
+ reg &= ~GM_RXCR_MCF_ENA;
+ else {
+ reg |= GM_RXCR_MCF_ENA;
+
+ if (rx_pause)
+ sky2_add_filter(filter, pause_mc_addr);
+
+ netdev_for_each_mc_addr(ha, dev)
+ sky2_add_filter(filter, ha->addr);
+ }
+
+ gma_write16(hw, port, GM_MC_ADDR_H1,
+ (u16) filter[0] | ((u16) filter[1] << 8));
+ gma_write16(hw, port, GM_MC_ADDR_H2,
+ (u16) filter[2] | ((u16) filter[3] << 8));
+ gma_write16(hw, port, GM_MC_ADDR_H3,
+ (u16) filter[4] | ((u16) filter[5] << 8));
+ gma_write16(hw, port, GM_MC_ADDR_H4,
+ (u16) filter[6] | ((u16) filter[7] << 8));
+
+ gma_write16(hw, port, GM_RX_CTRL, reg);
+}
+
+static struct rtnl_link_stats64 *sky2_get_stats(struct net_device *dev,
+ struct rtnl_link_stats64 *stats)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ unsigned int start;
+ u64 _bytes, _packets;
+
+ do {
+ start = u64_stats_fetch_begin_irq(&sky2->rx_stats.syncp);
+ _bytes = sky2->rx_stats.bytes;
+ _packets = sky2->rx_stats.packets;
+ } while (u64_stats_fetch_retry_irq(&sky2->rx_stats.syncp, start));
+
+ stats->rx_packets = _packets;
+ stats->rx_bytes = _bytes;
+
+ do {
+ start = u64_stats_fetch_begin_irq(&sky2->tx_stats.syncp);
+ _bytes = sky2->tx_stats.bytes;
+ _packets = sky2->tx_stats.packets;
+ } while (u64_stats_fetch_retry_irq(&sky2->tx_stats.syncp, start));
+
+ stats->tx_packets = _packets;
+ stats->tx_bytes = _bytes;
+
+ stats->multicast = get_stats32(hw, port, GM_RXF_MC_OK)
+ + get_stats32(hw, port, GM_RXF_BC_OK);
+
+ stats->collisions = get_stats32(hw, port, GM_TXF_COL);
+
+ stats->rx_length_errors = get_stats32(hw, port, GM_RXF_LNG_ERR);
+ stats->rx_crc_errors = get_stats32(hw, port, GM_RXF_FCS_ERR);
+ stats->rx_frame_errors = get_stats32(hw, port, GM_RXF_SHT)
+ + get_stats32(hw, port, GM_RXE_FRAG);
+ stats->rx_over_errors = get_stats32(hw, port, GM_RXE_FIFO_OV);
+
+ stats->rx_dropped = dev->stats.rx_dropped;
+ stats->rx_fifo_errors = dev->stats.rx_fifo_errors;
+ stats->tx_fifo_errors = dev->stats.tx_fifo_errors;
+
+ return stats;
+}
+
+/* Can have one global because blinking is controlled by
+ * ethtool and that is always under RTNL mutex
+ */
+static void sky2_led(struct sky2_port *sky2, enum led_mode mode)
+{
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+
+ spin_lock_bh(&sky2->phy_lock);
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
+ hw->chip_id == CHIP_ID_YUKON_EX ||
+ hw->chip_id == CHIP_ID_YUKON_SUPR) {
+ u16 pg;
+ pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
+
+ switch (mode) {
+ case MO_LED_OFF:
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+ PHY_M_LEDC_LOS_CTRL(8) |
+ PHY_M_LEDC_INIT_CTRL(8) |
+ PHY_M_LEDC_STA1_CTRL(8) |
+ PHY_M_LEDC_STA0_CTRL(8));
+ break;
+ case MO_LED_ON:
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+ PHY_M_LEDC_LOS_CTRL(9) |
+ PHY_M_LEDC_INIT_CTRL(9) |
+ PHY_M_LEDC_STA1_CTRL(9) |
+ PHY_M_LEDC_STA0_CTRL(9));
+ break;
+ case MO_LED_BLINK:
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+ PHY_M_LEDC_LOS_CTRL(0xa) |
+ PHY_M_LEDC_INIT_CTRL(0xa) |
+ PHY_M_LEDC_STA1_CTRL(0xa) |
+ PHY_M_LEDC_STA0_CTRL(0xa));
+ break;
+ case MO_LED_NORM:
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+ PHY_M_LEDC_LOS_CTRL(1) |
+ PHY_M_LEDC_INIT_CTRL(8) |
+ PHY_M_LEDC_STA1_CTRL(7) |
+ PHY_M_LEDC_STA0_CTRL(7));
+ }
+
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
+ } else
+ gm_phy_write(hw, port, PHY_MARV_LED_OVER,
+ PHY_M_LED_MO_DUP(mode) |
+ PHY_M_LED_MO_10(mode) |
+ PHY_M_LED_MO_100(mode) |
+ PHY_M_LED_MO_1000(mode) |
+ PHY_M_LED_MO_RX(mode) |
+ PHY_M_LED_MO_TX(mode));
+
+ spin_unlock_bh(&sky2->phy_lock);
+}
+
+/* blink LED's for finding board */
+static int sky2_set_phys_id(struct net_device *dev,
+ enum ethtool_phys_id_state state)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ return 1; /* cycle on/off once per second */
+ case ETHTOOL_ID_INACTIVE:
+ sky2_led(sky2, MO_LED_NORM);
+ break;
+ case ETHTOOL_ID_ON:
+ sky2_led(sky2, MO_LED_ON);
+ break;
+ case ETHTOOL_ID_OFF:
+ sky2_led(sky2, MO_LED_OFF);
+ break;
+ }
+
+ return 0;
+}
+
+static void sky2_get_pauseparam(struct net_device *dev,
+ struct ethtool_pauseparam *ecmd)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ switch (sky2->flow_mode) {
+ case FC_NONE:
+ ecmd->tx_pause = ecmd->rx_pause = 0;
+ break;
+ case FC_TX:
+ ecmd->tx_pause = 1, ecmd->rx_pause = 0;
+ break;
+ case FC_RX:
+ ecmd->tx_pause = 0, ecmd->rx_pause = 1;
+ break;
+ case FC_BOTH:
+ ecmd->tx_pause = ecmd->rx_pause = 1;
+ }
+
+ ecmd->autoneg = (sky2->flags & SKY2_FLAG_AUTO_PAUSE)
+ ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+}
+
+static int sky2_set_pauseparam(struct net_device *dev,
+ struct ethtool_pauseparam *ecmd)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ if (ecmd->autoneg == AUTONEG_ENABLE)
+ sky2->flags |= SKY2_FLAG_AUTO_PAUSE;
+ else
+ sky2->flags &= ~SKY2_FLAG_AUTO_PAUSE;
+
+ sky2->flow_mode = sky2_flow(ecmd->rx_pause, ecmd->tx_pause);
+
+ if (netif_running(dev))
+ sky2_phy_reinit(sky2);
+
+ return 0;
+}
+
+static int sky2_get_coalesce(struct net_device *dev,
+ struct ethtool_coalesce *ecmd)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+
+ if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_STOP)
+ ecmd->tx_coalesce_usecs = 0;
+ else {
+ u32 clks = sky2_read32(hw, STAT_TX_TIMER_INI);
+ ecmd->tx_coalesce_usecs = sky2_clk2us(hw, clks);
+ }
+ ecmd->tx_max_coalesced_frames = sky2_read16(hw, STAT_TX_IDX_TH);
+
+ if (sky2_read8(hw, STAT_LEV_TIMER_CTRL) == TIM_STOP)
+ ecmd->rx_coalesce_usecs = 0;
+ else {
+ u32 clks = sky2_read32(hw, STAT_LEV_TIMER_INI);
+ ecmd->rx_coalesce_usecs = sky2_clk2us(hw, clks);
+ }
+ ecmd->rx_max_coalesced_frames = sky2_read8(hw, STAT_FIFO_WM);
+
+ if (sky2_read8(hw, STAT_ISR_TIMER_CTRL) == TIM_STOP)
+ ecmd->rx_coalesce_usecs_irq = 0;
+ else {
+ u32 clks = sky2_read32(hw, STAT_ISR_TIMER_INI);
+ ecmd->rx_coalesce_usecs_irq = sky2_clk2us(hw, clks);
+ }
+
+ ecmd->rx_max_coalesced_frames_irq = sky2_read8(hw, STAT_FIFO_ISR_WM);
+
+ return 0;
+}
+
+/* Note: this affect both ports */
+static int sky2_set_coalesce(struct net_device *dev,
+ struct ethtool_coalesce *ecmd)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ const u32 tmax = sky2_clk2us(hw, 0x0ffffff);
+
+ if (ecmd->tx_coalesce_usecs > tmax ||
+ ecmd->rx_coalesce_usecs > tmax ||
+ ecmd->rx_coalesce_usecs_irq > tmax)
+ return -EINVAL;
+
+ if (ecmd->tx_max_coalesced_frames >= sky2->tx_ring_size-1)
+ return -EINVAL;
+ if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING)
+ return -EINVAL;
+ if (ecmd->rx_max_coalesced_frames_irq > RX_MAX_PENDING)
+ return -EINVAL;
+
+ if (ecmd->tx_coalesce_usecs == 0)
+ sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
+ else {
+ sky2_write32(hw, STAT_TX_TIMER_INI,
+ sky2_us2clk(hw, ecmd->tx_coalesce_usecs));
+ sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
+ }
+ sky2_write16(hw, STAT_TX_IDX_TH, ecmd->tx_max_coalesced_frames);
+
+ if (ecmd->rx_coalesce_usecs == 0)
+ sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_STOP);
+ else {
+ sky2_write32(hw, STAT_LEV_TIMER_INI,
+ sky2_us2clk(hw, ecmd->rx_coalesce_usecs));
+ sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
+ }
+ sky2_write8(hw, STAT_FIFO_WM, ecmd->rx_max_coalesced_frames);
+
+ if (ecmd->rx_coalesce_usecs_irq == 0)
+ sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_STOP);
+ else {
+ sky2_write32(hw, STAT_ISR_TIMER_INI,
+ sky2_us2clk(hw, ecmd->rx_coalesce_usecs_irq));
+ sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
+ }
+ sky2_write8(hw, STAT_FIFO_ISR_WM, ecmd->rx_max_coalesced_frames_irq);
+ return 0;
+}
+
+/*
+ * Hardware is limited to min of 128 and max of 2048 for ring size
+ * and rounded up to next power of two
+ * to avoid division in modulus calclation
+ */
+static unsigned long roundup_ring_size(unsigned long pending)
+{
+ return max(128ul, roundup_pow_of_two(pending+1));
+}
+
+static void sky2_get_ringparam(struct net_device *dev,
+ struct ethtool_ringparam *ering)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ ering->rx_max_pending = RX_MAX_PENDING;
+ ering->tx_max_pending = TX_MAX_PENDING;
+
+ ering->rx_pending = sky2->rx_pending;
+ ering->tx_pending = sky2->tx_pending;
+}
+
+static int sky2_set_ringparam(struct net_device *dev,
+ struct ethtool_ringparam *ering)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ if (ering->rx_pending > RX_MAX_PENDING ||
+ ering->rx_pending < 8 ||
+ ering->tx_pending < TX_MIN_PENDING ||
+ ering->tx_pending > TX_MAX_PENDING)
+ return -EINVAL;
+
+ sky2_detach(dev);
+
+ sky2->rx_pending = ering->rx_pending;
+ sky2->tx_pending = ering->tx_pending;
+ sky2->tx_ring_size = roundup_ring_size(sky2->tx_pending);
+
+ return sky2_reattach(dev);
+}
+
+static int sky2_get_regs_len(struct net_device *dev)
+{
+ return 0x4000;
+}
+
+static int sky2_reg_access_ok(struct sky2_hw *hw, unsigned int b)
+{
+ /* This complicated switch statement is to make sure and
+ * only access regions that are unreserved.
+ * Some blocks are only valid on dual port cards.
+ */
+ switch (b) {
+ /* second port */
+ case 5: /* Tx Arbiter 2 */
+ case 9: /* RX2 */
+ case 14 ... 15: /* TX2 */
+ case 17: case 19: /* Ram Buffer 2 */
+ case 22 ... 23: /* Tx Ram Buffer 2 */
+ case 25: /* Rx MAC Fifo 1 */
+ case 27: /* Tx MAC Fifo 2 */
+ case 31: /* GPHY 2 */
+ case 40 ... 47: /* Pattern Ram 2 */
+ case 52: case 54: /* TCP Segmentation 2 */
+ case 112 ... 116: /* GMAC 2 */
+ return hw->ports > 1;
+
+ case 0: /* Control */
+ case 2: /* Mac address */
+ case 4: /* Tx Arbiter 1 */
+ case 7: /* PCI express reg */
+ case 8: /* RX1 */
+ case 12 ... 13: /* TX1 */
+ case 16: case 18:/* Rx Ram Buffer 1 */
+ case 20 ... 21: /* Tx Ram Buffer 1 */
+ case 24: /* Rx MAC Fifo 1 */
+ case 26: /* Tx MAC Fifo 1 */
+ case 28 ... 29: /* Descriptor and status unit */
+ case 30: /* GPHY 1*/
+ case 32 ... 39: /* Pattern Ram 1 */
+ case 48: case 50: /* TCP Segmentation 1 */
+ case 56 ... 60: /* PCI space */
+ case 80 ... 84: /* GMAC 1 */
+ return 1;
+
+ default:
+ return 0;
+ }
+}
+
+/*
+ * Returns copy of control register region
+ * Note: ethtool_get_regs always provides full size (16k) buffer
+ */
+static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs,
+ void *p)
+{
+ const struct sky2_port *sky2 = netdev_priv(dev);
+ const void __iomem *io = sky2->hw->regs;
+ unsigned int b;
+
+ regs->version = 1;
+
+ for (b = 0; b < 128; b++) {
+ /* skip poisonous diagnostic ram region in block 3 */
+ if (b == 3)
+ memcpy_fromio(p + 0x10, io + 0x10, 128 - 0x10);
+ else if (sky2_reg_access_ok(sky2->hw, b))
+ memcpy_fromio(p, io, 128);
+ else
+ memset(p, 0, 128);
+
+ p += 128;
+ io += 128;
+ }
+}
+
+static int sky2_get_eeprom_len(struct net_device *dev)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ u16 reg2;
+
+ reg2 = sky2_pci_read16(hw, PCI_DEV_REG2);
+ return 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
+}
+
+static int sky2_vpd_wait(const struct sky2_hw *hw, int cap, u16 busy)
+{
+ unsigned long start = jiffies;
+
+ while ( (sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F) == busy) {
+ /* Can take up to 10.6 ms for write */
+ if (time_after(jiffies, start + HZ/4)) {
+ dev_err(&hw->pdev->dev, "VPD cycle timed out\n");
+ return -ETIMEDOUT;
+ }
+ mdelay(1);
+ }
+
+ return 0;
+}
+
+static int sky2_vpd_read(struct sky2_hw *hw, int cap, void *data,
+ u16 offset, size_t length)
+{
+ int rc = 0;
+
+ while (length > 0) {
+ u32 val;
+
+ sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset);
+ rc = sky2_vpd_wait(hw, cap, 0);
+ if (rc)
+ break;
+
+ val = sky2_pci_read32(hw, cap + PCI_VPD_DATA);
+
+ memcpy(data, &val, min(sizeof(val), length));
+ offset += sizeof(u32);
+ data += sizeof(u32);
+ length -= sizeof(u32);
+ }
+
+ return rc;
+}
+
+static int sky2_vpd_write(struct sky2_hw *hw, int cap, const void *data,
+ u16 offset, unsigned int length)
+{
+ unsigned int i;
+ int rc = 0;
+
+ for (i = 0; i < length; i += sizeof(u32)) {
+ u32 val = *(u32 *)(data + i);
+
+ sky2_pci_write32(hw, cap + PCI_VPD_DATA, val);
+ sky2_pci_write32(hw, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F);
+
+ rc = sky2_vpd_wait(hw, cap, PCI_VPD_ADDR_F);
+ if (rc)
+ break;
+ }
+ return rc;
+}
+
+static int sky2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
+ u8 *data)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD);
+
+ if (!cap)
+ return -EINVAL;
+
+ eeprom->magic = SKY2_EEPROM_MAGIC;
+
+ return sky2_vpd_read(sky2->hw, cap, data, eeprom->offset, eeprom->len);
+}
+
+static int sky2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
+ u8 *data)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD);
+
+ if (!cap)
+ return -EINVAL;
+
+ if (eeprom->magic != SKY2_EEPROM_MAGIC)
+ return -EINVAL;
+
+ /* Partial writes not supported */
+ if ((eeprom->offset & 3) || (eeprom->len & 3))
+ return -EINVAL;
+
+ return sky2_vpd_write(sky2->hw, cap, data, eeprom->offset, eeprom->len);
+}
+
+static netdev_features_t sky2_fix_features(struct net_device *dev,
+ netdev_features_t features)
+{
+ const struct sky2_port *sky2 = netdev_priv(dev);
+ const struct sky2_hw *hw = sky2->hw;
+
+ /* In order to do Jumbo packets on these chips, need to turn off the
+ * transmit store/forward. Therefore checksum offload won't work.
+ */
+ if (dev->mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_EC_U) {
+ netdev_info(dev, "checksum offload not possible with jumbo frames\n");
+ features &= ~(NETIF_F_TSO|NETIF_F_SG|NETIF_F_ALL_CSUM);
+ }
+
+ /* Some hardware requires receive checksum for RSS to work. */
+ if ( (features & NETIF_F_RXHASH) &&
+ !(features & NETIF_F_RXCSUM) &&
+ (sky2->hw->flags & SKY2_HW_RSS_CHKSUM)) {
+ netdev_info(dev, "receive hashing forces receive checksum\n");
+ features |= NETIF_F_RXCSUM;
+ }
+
+ return features;
+}
+
+static int sky2_set_features(struct net_device *dev, netdev_features_t features)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ netdev_features_t changed = dev->features ^ features;
+
+ if ((changed & NETIF_F_RXCSUM) &&
+ !(sky2->hw->flags & SKY2_HW_NEW_LE)) {
+ sky2_write32(sky2->hw,
+ Q_ADDR(rxqaddr[sky2->port], Q_CSR),
+ (features & NETIF_F_RXCSUM)
+ ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
+ }
+
+ if (changed & NETIF_F_RXHASH)
+ rx_set_rss(dev, features);
+
+ if (changed & (NETIF_F_HW_VLAN_CTAG_TX|NETIF_F_HW_VLAN_CTAG_RX))
+ sky2_vlan_mode(dev, features);
+
+ return 0;
+}
+
+static const struct ethtool_ops sky2_ethtool_ops = {
+ .get_settings = sky2_get_settings,
+ .set_settings = sky2_set_settings,
+ .get_drvinfo = sky2_get_drvinfo,
+ .get_wol = sky2_get_wol,
+ .set_wol = sky2_set_wol,
+ .get_msglevel = sky2_get_msglevel,
+ .set_msglevel = sky2_set_msglevel,
+ .nway_reset = sky2_nway_reset,
+ .get_regs_len = sky2_get_regs_len,
+ .get_regs = sky2_get_regs,
+ .get_link = ethtool_op_get_link,
+ .get_eeprom_len = sky2_get_eeprom_len,
+ .get_eeprom = sky2_get_eeprom,
+ .set_eeprom = sky2_set_eeprom,
+ .get_strings = sky2_get_strings,
+ .get_coalesce = sky2_get_coalesce,
+ .set_coalesce = sky2_set_coalesce,
+ .get_ringparam = sky2_get_ringparam,
+ .set_ringparam = sky2_set_ringparam,
+ .get_pauseparam = sky2_get_pauseparam,
+ .set_pauseparam = sky2_set_pauseparam,
+ .set_phys_id = sky2_set_phys_id,
+ .get_sset_count = sky2_get_sset_count,
+ .get_ethtool_stats = sky2_get_ethtool_stats,
+};
+
+#ifdef CONFIG_SKY2_DEBUG
+
+static struct dentry *sky2_debug;
+
+
+/*
+ * Read and parse the first part of Vital Product Data
+ */
+#define VPD_SIZE 128
+#define VPD_MAGIC 0x82
+
+static const struct vpd_tag {
+ char tag[2];
+ char *label;
+} vpd_tags[] = {
+ { "PN", "Part Number" },
+ { "EC", "Engineering Level" },
+ { "MN", "Manufacturer" },
+ { "SN", "Serial Number" },
+ { "YA", "Asset Tag" },
+ { "VL", "First Error Log Message" },
+ { "VF", "Second Error Log Message" },
+ { "VB", "Boot Agent ROM Configuration" },
+ { "VE", "EFI UNDI Configuration" },
+};
+
+static void sky2_show_vpd(struct seq_file *seq, struct sky2_hw *hw)
+{
+ size_t vpd_size;
+ loff_t offs;
+ u8 len;
+ unsigned char *buf;
+ u16 reg2;
+
+ reg2 = sky2_pci_read16(hw, PCI_DEV_REG2);
+ vpd_size = 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
+
+ seq_printf(seq, "%s Product Data\n", pci_name(hw->pdev));
+ buf = kmalloc(vpd_size, GFP_KERNEL);
+ if (!buf) {
+ seq_puts(seq, "no memory!\n");
+ return;
+ }
+
+ if (pci_read_vpd(hw->pdev, 0, vpd_size, buf) < 0) {
+ seq_puts(seq, "VPD read failed\n");
+ goto out;
+ }
+
+ if (buf[0] != VPD_MAGIC) {
+ seq_printf(seq, "VPD tag mismatch: %#x\n", buf[0]);
+ goto out;
+ }
+ len = buf[1];
+ if (len == 0 || len > vpd_size - 4) {
+ seq_printf(seq, "Invalid id length: %d\n", len);
+ goto out;
+ }
+
+ seq_printf(seq, "%.*s\n", len, buf + 3);
+ offs = len + 3;
+
+ while (offs < vpd_size - 4) {
+ int i;
+
+ if (!memcmp("RW", buf + offs, 2)) /* end marker */
+ break;
+ len = buf[offs + 2];
+ if (offs + len + 3 >= vpd_size)
+ break;
+
+ for (i = 0; i < ARRAY_SIZE(vpd_tags); i++) {
+ if (!memcmp(vpd_tags[i].tag, buf + offs, 2)) {
+ seq_printf(seq, " %s: %.*s\n",
+ vpd_tags[i].label, len, buf + offs + 3);
+ break;
+ }
+ }
+ offs += len + 3;
+ }
+out:
+ kfree(buf);
+}
+
+static int sky2_debug_show(struct seq_file *seq, void *v)
+{
+ struct net_device *dev = seq->private;
+ const struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ unsigned idx, last;
+ int sop;
+
+ sky2_show_vpd(seq, hw);
+
+ seq_printf(seq, "\nIRQ src=%x mask=%x control=%x\n",
+ sky2_read32(hw, B0_ISRC),
+ sky2_read32(hw, B0_IMSK),
+ sky2_read32(hw, B0_Y2_SP_ICR));
+
+ if (!netif_running(dev)) {
+ seq_printf(seq, "network not running\n");
+ return 0;
+ }
+
+ napi_disable(&hw->napi);
+ last = sky2_read16(hw, STAT_PUT_IDX);
+
+ seq_printf(seq, "Status ring %u\n", hw->st_size);
+ if (hw->st_idx == last)
+ seq_puts(seq, "Status ring (empty)\n");
+ else {
+ seq_puts(seq, "Status ring\n");
+ for (idx = hw->st_idx; idx != last && idx < hw->st_size;
+ idx = RING_NEXT(idx, hw->st_size)) {
+ const struct sky2_status_le *le = hw->st_le + idx;
+ seq_printf(seq, "[%d] %#x %d %#x\n",
+ idx, le->opcode, le->length, le->status);
+ }
+ seq_puts(seq, "\n");
+ }
+
+ seq_printf(seq, "Tx ring pending=%u...%u report=%d done=%d\n",
+ sky2->tx_cons, sky2->tx_prod,
+ sky2_read16(hw, port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
+ sky2_read16(hw, Q_ADDR(txqaddr[port], Q_DONE)));
+
+ /* Dump contents of tx ring */
+ sop = 1;
+ for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < sky2->tx_ring_size;
+ idx = RING_NEXT(idx, sky2->tx_ring_size)) {
+ const struct sky2_tx_le *le = sky2->tx_le + idx;
+ u32 a = le32_to_cpu(le->addr);
+
+ if (sop)
+ seq_printf(seq, "%u:", idx);
+ sop = 0;
+
+ switch (le->opcode & ~HW_OWNER) {
+ case OP_ADDR64:
+ seq_printf(seq, " %#x:", a);
+ break;
+ case OP_LRGLEN:
+ seq_printf(seq, " mtu=%d", a);
+ break;
+ case OP_VLAN:
+ seq_printf(seq, " vlan=%d", be16_to_cpu(le->length));
+ break;
+ case OP_TCPLISW:
+ seq_printf(seq, " csum=%#x", a);
+ break;
+ case OP_LARGESEND:
+ seq_printf(seq, " tso=%#x(%d)", a, le16_to_cpu(le->length));
+ break;
+ case OP_PACKET:
+ seq_printf(seq, " %#x(%d)", a, le16_to_cpu(le->length));
+ break;
+ case OP_BUFFER:
+ seq_printf(seq, " frag=%#x(%d)", a, le16_to_cpu(le->length));
+ break;
+ default:
+ seq_printf(seq, " op=%#x,%#x(%d)", le->opcode,
+ a, le16_to_cpu(le->length));
+ }
+
+ if (le->ctrl & EOP) {
+ seq_putc(seq, '\n');
+ sop = 1;
+ }
+ }
+
+ seq_printf(seq, "\nRx ring hw get=%d put=%d last=%d\n",
+ sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_GET_IDX)),
+ sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_PUT_IDX)),
+ sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_LAST_IDX)));
+
+ sky2_read32(hw, B0_Y2_SP_LISR);
+ napi_enable(&hw->napi);
+ return 0;
+}
+
+static int sky2_debug_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, sky2_debug_show, inode->i_private);
+}
+
+static const struct file_operations sky2_debug_fops = {
+ .owner = THIS_MODULE,
+ .open = sky2_debug_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+/*
+ * Use network device events to create/remove/rename
+ * debugfs file entries
+ */
+static int sky2_device_event(struct notifier_block *unused,
+ unsigned long event, void *ptr)
+{
+ struct net_device *dev = netdev_notifier_info_to_dev(ptr);
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ if (dev->netdev_ops->ndo_open != sky2_open || !sky2_debug)
+ return NOTIFY_DONE;
+
+ switch (event) {
+ case NETDEV_CHANGENAME:
+ if (sky2->debugfs) {
+ sky2->debugfs = debugfs_rename(sky2_debug, sky2->debugfs,
+ sky2_debug, dev->name);
+ }
+ break;
+
+ case NETDEV_GOING_DOWN:
+ if (sky2->debugfs) {
+ netdev_printk(KERN_DEBUG, dev, "remove debugfs\n");
+ debugfs_remove(sky2->debugfs);
+ sky2->debugfs = NULL;
+ }
+ break;
+
+ case NETDEV_UP:
+ sky2->debugfs = debugfs_create_file(dev->name, S_IRUGO,
+ sky2_debug, dev,
+ &sky2_debug_fops);
+ if (IS_ERR(sky2->debugfs))
+ sky2->debugfs = NULL;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block sky2_notifier = {
+ .notifier_call = sky2_device_event,
+};
+
+
+static __init void sky2_debug_init(void)
+{
+ struct dentry *ent;
+
+ ent = debugfs_create_dir("sky2", NULL);
+ if (!ent || IS_ERR(ent))
+ return;
+
+ sky2_debug = ent;
+ register_netdevice_notifier(&sky2_notifier);
+}
+
+static __exit void sky2_debug_cleanup(void)
+{
+ if (sky2_debug) {
+ unregister_netdevice_notifier(&sky2_notifier);
+ debugfs_remove(sky2_debug);
+ sky2_debug = NULL;
+ }
+}
+
+#else
+#define sky2_debug_init()
+#define sky2_debug_cleanup()
+#endif
+
+/* Two copies of network device operations to handle special case of
+ not allowing netpoll on second port */
+static const struct net_device_ops sky2_netdev_ops[2] = {
+ {
+ .ndo_open = sky2_open,
+ .ndo_stop = sky2_close,
+ .ndo_start_xmit = sky2_xmit_frame,
+ .ndo_do_ioctl = sky2_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = sky2_set_mac_address,
+ .ndo_set_rx_mode = sky2_set_multicast,
+ .ndo_change_mtu = sky2_change_mtu,
+ .ndo_fix_features = sky2_fix_features,
+ .ndo_set_features = sky2_set_features,
+ .ndo_tx_timeout = sky2_tx_timeout,
+ .ndo_get_stats64 = sky2_get_stats,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = sky2_netpoll,
+#endif
+ },
+ {
+ .ndo_open = sky2_open,
+ .ndo_stop = sky2_close,
+ .ndo_start_xmit = sky2_xmit_frame,
+ .ndo_do_ioctl = sky2_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = sky2_set_mac_address,
+ .ndo_set_rx_mode = sky2_set_multicast,
+ .ndo_change_mtu = sky2_change_mtu,
+ .ndo_fix_features = sky2_fix_features,
+ .ndo_set_features = sky2_set_features,
+ .ndo_tx_timeout = sky2_tx_timeout,
+ .ndo_get_stats64 = sky2_get_stats,
+ },
+};
+
+/* Initialize network device */
+static struct net_device *sky2_init_netdev(struct sky2_hw *hw, unsigned port,
+ int highmem, int wol)
+{
+ struct sky2_port *sky2;
+ struct net_device *dev = alloc_etherdev(sizeof(*sky2));
+ const void *iap;
+
+ if (!dev)
+ return NULL;
+
+ SET_NETDEV_DEV(dev, &hw->pdev->dev);
+ dev->irq = hw->pdev->irq;
+ dev->ethtool_ops = &sky2_ethtool_ops;
+ dev->watchdog_timeo = TX_WATCHDOG;
+ dev->netdev_ops = &sky2_netdev_ops[port];
+
+ sky2 = netdev_priv(dev);
+ sky2->netdev = dev;
+ sky2->hw = hw;
+ sky2->msg_enable = netif_msg_init(debug, default_msg);
+
+ u64_stats_init(&sky2->tx_stats.syncp);
+ u64_stats_init(&sky2->rx_stats.syncp);
+
+ /* Auto speed and flow control */
+ sky2->flags = SKY2_FLAG_AUTO_SPEED | SKY2_FLAG_AUTO_PAUSE;
+ if (hw->chip_id != CHIP_ID_YUKON_XL)
+ dev->hw_features |= NETIF_F_RXCSUM;
+
+ sky2->flow_mode = FC_BOTH;
+
+ sky2->duplex = -1;
+ sky2->speed = -1;
+ sky2->advertising = sky2_supported_modes(hw);
+ sky2->wol = wol;
+
+ spin_lock_init(&sky2->phy_lock);
+
+ sky2->tx_pending = TX_DEF_PENDING;
+ sky2->tx_ring_size = roundup_ring_size(TX_DEF_PENDING);
+ sky2->rx_pending = RX_DEF_PENDING;
+
+ hw->dev[port] = dev;
+
+ sky2->port = port;
+
+ dev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO;
+
+ if (highmem)
+ dev->features |= NETIF_F_HIGHDMA;
+
+ /* Enable receive hashing unless hardware is known broken */
+ if (!(hw->flags & SKY2_HW_RSS_BROKEN))
+ dev->hw_features |= NETIF_F_RXHASH;
+
+ if (!(hw->flags & SKY2_HW_VLAN_BROKEN)) {
+ dev->hw_features |= NETIF_F_HW_VLAN_CTAG_TX |
+ NETIF_F_HW_VLAN_CTAG_RX;
+ dev->vlan_features |= SKY2_VLAN_OFFLOADS;
+ }
+
+ dev->features |= dev->hw_features;
+
+ /* try to get mac address in the following order:
+ * 1) from device tree data
+ * 2) from internal registers set by bootloader
+ */
+ iap = of_get_mac_address(hw->pdev->dev.of_node);
+ if (iap)
+ memcpy(dev->dev_addr, iap, ETH_ALEN);
+ else
+ memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8,
+ ETH_ALEN);
+
+ return dev;
+}
+
+static void sky2_show_addr(struct net_device *dev)
+{
+ const struct sky2_port *sky2 = netdev_priv(dev);
+
+ netif_info(sky2, probe, dev, "addr %pM\n", dev->dev_addr);
+}
+
+/* Handle software interrupt used during MSI test */
+static irqreturn_t sky2_test_intr(int irq, void *dev_id)
+{
+ struct sky2_hw *hw = dev_id;
+ u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
+
+ if (status == 0)
+ return IRQ_NONE;
+
+ if (status & Y2_IS_IRQ_SW) {
+ hw->flags |= SKY2_HW_USE_MSI;
+ wake_up(&hw->msi_wait);
+ sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
+ }
+ sky2_write32(hw, B0_Y2_SP_ICR, 2);
+
+ return IRQ_HANDLED;
+}
+
+/* Test interrupt path by forcing a a software IRQ */
+static int sky2_test_msi(struct sky2_hw *hw)
+{
+ struct pci_dev *pdev = hw->pdev;
+ int err;
+
+ init_waitqueue_head(&hw->msi_wait);
+
+ err = request_irq(pdev->irq, sky2_test_intr, 0, DRV_NAME, hw);
+ if (err) {
+ dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
+ return err;
+ }
+
+ sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
+
+ sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ);
+ sky2_read8(hw, B0_CTST);
+
+ wait_event_timeout(hw->msi_wait, (hw->flags & SKY2_HW_USE_MSI), HZ/10);
+
+ if (!(hw->flags & SKY2_HW_USE_MSI)) {
+ /* MSI test failed, go back to INTx mode */
+ dev_info(&pdev->dev, "No interrupt generated using MSI, "
+ "switching to INTx mode.\n");
+
+ err = -EOPNOTSUPP;
+ sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
+ }
+
+ sky2_write32(hw, B0_IMSK, 0);
+ sky2_read32(hw, B0_IMSK);
+
+ free_irq(pdev->irq, hw);
+
+ return err;
+}
+
+/* This driver supports yukon2 chipset only */
+static const char *sky2_name(u8 chipid, char *buf, int sz)
+{
+ const char *name[] = {
+ "XL", /* 0xb3 */
+ "EC Ultra", /* 0xb4 */
+ "Extreme", /* 0xb5 */
+ "EC", /* 0xb6 */
+ "FE", /* 0xb7 */
+ "FE+", /* 0xb8 */
+ "Supreme", /* 0xb9 */
+ "UL 2", /* 0xba */
+ "Unknown", /* 0xbb */
+ "Optima", /* 0xbc */
+ "OptimaEEE", /* 0xbd */
+ "Optima 2", /* 0xbe */
+ };
+
+ if (chipid >= CHIP_ID_YUKON_XL && chipid <= CHIP_ID_YUKON_OP_2)
+ strncpy(buf, name[chipid - CHIP_ID_YUKON_XL], sz);
+ else
+ snprintf(buf, sz, "(chip %#x)", chipid);
+ return buf;
+}
+
+static int sky2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct net_device *dev, *dev1;
+ struct sky2_hw *hw;
+ int err, using_dac = 0, wol_default;
+ u32 reg;
+ char buf1[16];
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "cannot enable PCI device\n");
+ goto err_out;
+ }
+
+ /* Get configuration information
+ * Note: only regular PCI config access once to test for HW issues
+ * other PCI access through shared memory for speed and to
+ * avoid MMCONFIG problems.
+ */
+ err = pci_read_config_dword(pdev, PCI_DEV_REG2, &reg);
+ if (err) {
+ dev_err(&pdev->dev, "PCI read config failed\n");
+ goto err_out_disable;
+ }
+
+ if (~reg == 0) {
+ dev_err(&pdev->dev, "PCI configuration read error\n");
+ err = -EIO;
+ goto err_out_disable;
+ }
+
+ err = pci_request_regions(pdev, DRV_NAME);
+ if (err) {
+ dev_err(&pdev->dev, "cannot obtain PCI resources\n");
+ goto err_out_disable;
+ }
+
+ pci_set_master(pdev);
+
+ if (sizeof(dma_addr_t) > sizeof(u32) &&
+ !(err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))) {
+ using_dac = 1;
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (err < 0) {
+ dev_err(&pdev->dev, "unable to obtain 64 bit DMA "
+ "for consistent allocations\n");
+ goto err_out_free_regions;
+ }
+ } else {
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
+ dev_err(&pdev->dev, "no usable DMA configuration\n");
+ goto err_out_free_regions;
+ }
+ }
+
+
+#ifdef __BIG_ENDIAN
+ /* The sk98lin vendor driver uses hardware byte swapping but
+ * this driver uses software swapping.
+ */
+ reg &= ~PCI_REV_DESC;
+ err = pci_write_config_dword(pdev, PCI_DEV_REG2, reg);
+ if (err) {
+ dev_err(&pdev->dev, "PCI write config failed\n");
+ goto err_out_free_regions;
+ }
+#endif
+
+ wol_default = device_may_wakeup(&pdev->dev) ? WAKE_MAGIC : 0;
+
+ err = -ENOMEM;
+
+ hw = kzalloc(sizeof(*hw) + strlen(DRV_NAME "@pci:")
+ + strlen(pci_name(pdev)) + 1, GFP_KERNEL);
+ if (!hw)
+ goto err_out_free_regions;
+
+ hw->pdev = pdev;
+ sprintf(hw->irq_name, DRV_NAME "@pci:%s", pci_name(pdev));
+
+ hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
+ if (!hw->regs) {
+ dev_err(&pdev->dev, "cannot map device registers\n");
+ goto err_out_free_hw;
+ }
+
+ err = sky2_init(hw);
+ if (err)
+ goto err_out_iounmap;
+
+ /* ring for status responses */
+ hw->st_size = hw->ports * roundup_pow_of_two(3*RX_MAX_PENDING + TX_MAX_PENDING);
+ hw->st_le = pci_alloc_consistent(pdev, hw->st_size * sizeof(struct sky2_status_le),
+ &hw->st_dma);
+ if (!hw->st_le) {
+ err = -ENOMEM;
+ goto err_out_reset;
+ }
+
+ dev_info(&pdev->dev, "Yukon-2 %s chip revision %d\n",
+ sky2_name(hw->chip_id, buf1, sizeof(buf1)), hw->chip_rev);
+
+ sky2_reset(hw);
+
+ dev = sky2_init_netdev(hw, 0, using_dac, wol_default);
+ if (!dev) {
+ err = -ENOMEM;
+ goto err_out_free_pci;
+ }
+
+ if (!disable_msi && pci_enable_msi(pdev) == 0) {
+ err = sky2_test_msi(hw);
+ if (err) {
+ pci_disable_msi(pdev);
+ if (err != -EOPNOTSUPP)
+ goto err_out_free_netdev;
+ }
+ }
+
+ netif_napi_add(dev, &hw->napi, sky2_poll, NAPI_WEIGHT);
+
+ err = register_netdev(dev);
+ if (err) {
+ dev_err(&pdev->dev, "cannot register net device\n");
+ goto err_out_free_netdev;
+ }
+
+ netif_carrier_off(dev);
+
+ sky2_show_addr(dev);
+
+ if (hw->ports > 1) {
+ dev1 = sky2_init_netdev(hw, 1, using_dac, wol_default);
+ if (!dev1) {
+ err = -ENOMEM;
+ goto err_out_unregister;
+ }
+
+ err = register_netdev(dev1);
+ if (err) {
+ dev_err(&pdev->dev, "cannot register second net device\n");
+ goto err_out_free_dev1;
+ }
+
+ err = sky2_setup_irq(hw, hw->irq_name);
+ if (err)
+ goto err_out_unregister_dev1;
+
+ sky2_show_addr(dev1);
+ }
+
+ setup_timer(&hw->watchdog_timer, sky2_watchdog, (unsigned long) hw);
+ INIT_WORK(&hw->restart_work, sky2_restart);
+
+ pci_set_drvdata(pdev, hw);
+ pdev->d3_delay = 150;
+
+ return 0;
+
+err_out_unregister_dev1:
+ unregister_netdev(dev1);
+err_out_free_dev1:
+ free_netdev(dev1);
+err_out_unregister:
+ unregister_netdev(dev);
+err_out_free_netdev:
+ if (hw->flags & SKY2_HW_USE_MSI)
+ pci_disable_msi(pdev);
+ free_netdev(dev);
+err_out_free_pci:
+ pci_free_consistent(pdev, hw->st_size * sizeof(struct sky2_status_le),
+ hw->st_le, hw->st_dma);
+err_out_reset:
+ sky2_write8(hw, B0_CTST, CS_RST_SET);
+err_out_iounmap:
+ iounmap(hw->regs);
+err_out_free_hw:
+ kfree(hw);
+err_out_free_regions:
+ pci_release_regions(pdev);
+err_out_disable:
+ pci_disable_device(pdev);
+err_out:
+ return err;
+}
+
+static void sky2_remove(struct pci_dev *pdev)
+{
+ struct sky2_hw *hw = pci_get_drvdata(pdev);
+ int i;
+
+ if (!hw)
+ return;
+
+ del_timer_sync(&hw->watchdog_timer);
+ cancel_work_sync(&hw->restart_work);
+
+ for (i = hw->ports-1; i >= 0; --i)
+ unregister_netdev(hw->dev[i]);
+
+ sky2_write32(hw, B0_IMSK, 0);
+ sky2_read32(hw, B0_IMSK);
+
+ sky2_power_aux(hw);
+
+ sky2_write8(hw, B0_CTST, CS_RST_SET);
+ sky2_read8(hw, B0_CTST);
+
+ if (hw->ports > 1) {
+ napi_disable(&hw->napi);
+ free_irq(pdev->irq, hw);
+ }
+
+ if (hw->flags & SKY2_HW_USE_MSI)
+ pci_disable_msi(pdev);
+ pci_free_consistent(pdev, hw->st_size * sizeof(struct sky2_status_le),
+ hw->st_le, hw->st_dma);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+
+ for (i = hw->ports-1; i >= 0; --i)
+ free_netdev(hw->dev[i]);
+
+ iounmap(hw->regs);
+ kfree(hw);
+}
+
+static int sky2_suspend(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct sky2_hw *hw = pci_get_drvdata(pdev);
+ int i;
+
+ if (!hw)
+ return 0;
+
+ del_timer_sync(&hw->watchdog_timer);
+ cancel_work_sync(&hw->restart_work);
+
+ rtnl_lock();
+
+ sky2_all_down(hw);
+ for (i = 0; i < hw->ports; i++) {
+ struct net_device *dev = hw->dev[i];
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ if (sky2->wol)
+ sky2_wol_init(sky2);
+ }
+
+ sky2_power_aux(hw);
+ rtnl_unlock();
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sky2_resume(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct sky2_hw *hw = pci_get_drvdata(pdev);
+ int err;
+
+ if (!hw)
+ return 0;
+
+ /* Re-enable all clocks */
+ err = pci_write_config_dword(pdev, PCI_DEV_REG3, 0);
+ if (err) {
+ dev_err(&pdev->dev, "PCI write config failed\n");
+ goto out;
+ }
+
+ rtnl_lock();
+ sky2_reset(hw);
+ sky2_all_up(hw);
+ rtnl_unlock();
+
+ return 0;
+out:
+
+ dev_err(&pdev->dev, "resume failed (%d)\n", err);
+ pci_disable_device(pdev);
+ return err;
+}
+
+static SIMPLE_DEV_PM_OPS(sky2_pm_ops, sky2_suspend, sky2_resume);
+#define SKY2_PM_OPS (&sky2_pm_ops)
+
+#else
+
+#define SKY2_PM_OPS NULL
+#endif
+
+static void sky2_shutdown(struct pci_dev *pdev)
+{
+ sky2_suspend(&pdev->dev);
+ pci_wake_from_d3(pdev, device_may_wakeup(&pdev->dev));
+ pci_set_power_state(pdev, PCI_D3hot);
+}
+
+static struct pci_driver sky2_driver = {
+ .name = DRV_NAME,
+ .id_table = sky2_id_table,
+ .probe = sky2_probe,
+ .remove = sky2_remove,
+ .shutdown = sky2_shutdown,
+ .driver.pm = SKY2_PM_OPS,
+};
+
+static int __init sky2_init_module(void)
+{
+ pr_info("driver version " DRV_VERSION "\n");
+
+ sky2_debug_init();
+ return pci_register_driver(&sky2_driver);
+}
+
+static void __exit sky2_cleanup_module(void)
+{
+ pci_unregister_driver(&sky2_driver);
+ sky2_debug_cleanup();
+}
+
+module_init(sky2_init_module);
+module_exit(sky2_cleanup_module);
+
+MODULE_DESCRIPTION("Marvell Yukon 2 Gigabit Ethernet driver");
+MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);