summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/net/ethernet/marvell/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/net/ethernet/marvell/Kconfig')
-rw-r--r--kernel/drivers/net/ethernet/marvell/Kconfig143
1 files changed, 143 insertions, 0 deletions
diff --git a/kernel/drivers/net/ethernet/marvell/Kconfig b/kernel/drivers/net/ethernet/marvell/Kconfig
new file mode 100644
index 000000000..d323a695d
--- /dev/null
+++ b/kernel/drivers/net/ethernet/marvell/Kconfig
@@ -0,0 +1,143 @@
+#
+# Marvell device configuration
+#
+
+config NET_VENDOR_MARVELL
+ bool "Marvell devices"
+ default y
+ depends on PCI || CPU_PXA168 || MV64X60 || PPC32 || PLAT_ORION || INET
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Marvell devices. If you say Y, you will be
+ asked for your specific card in the following questions.
+
+if NET_VENDOR_MARVELL
+
+config MV643XX_ETH
+ tristate "Marvell Discovery (643XX) and Orion ethernet support"
+ depends on (MV64X60 || PPC32 || PLAT_ORION) && INET
+ select PHYLIB
+ select MVMDIO
+ ---help---
+ This driver supports the gigabit ethernet MACs in the
+ Marvell Discovery PPC/MIPS chipset family (MV643XX) and
+ in the Marvell Orion ARM SoC family.
+
+ Some boards that use the Discovery chipset are the Momenco
+ Ocelot C and Jaguar ATX and Pegasos II.
+
+config MVMDIO
+ tristate "Marvell MDIO interface support"
+ depends on HAS_IOMEM
+ select PHYLIB
+ ---help---
+ This driver supports the MDIO interface found in the network
+ interface units of the Marvell EBU SoCs (Kirkwood, Orion5x,
+ Dove, Armada 370 and Armada XP).
+
+ This driver is used by the MV643XX_ETH and MVNETA drivers.
+
+config MVNETA
+ tristate "Marvell Armada 370/38x/XP network interface support"
+ depends on PLAT_ORION
+ select MVMDIO
+ ---help---
+ This driver supports the network interface units in the
+ Marvell ARMADA XP, ARMADA 370 and ARMADA 38x SoC family.
+
+ Note that this driver is distinct from the mv643xx_eth
+ driver, which should be used for the older Marvell SoCs
+ (Dove, Orion, Discovery, Kirkwood).
+
+config MVPP2
+ tristate "Marvell Armada 375 network interface support"
+ depends on MACH_ARMADA_375
+ select MVMDIO
+ ---help---
+ This driver supports the network interface units in the
+ Marvell ARMADA 375 SoC.
+
+config PXA168_ETH
+ tristate "Marvell pxa168 ethernet support"
+ depends on HAS_IOMEM && HAS_DMA
+ depends on CPU_PXA168 || ARCH_BERLIN || COMPILE_TEST
+ select PHYLIB
+ ---help---
+ This driver supports the pxa168 Ethernet ports.
+
+ To compile this driver as a module, choose M here. The module
+ will be called pxa168_eth.
+
+config SKGE
+ tristate "Marvell Yukon Gigabit Ethernet support"
+ depends on PCI
+ select CRC32
+ ---help---
+ This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
+ and related Gigabit Ethernet adapters. It is a new smaller driver
+ with better performance and more complete ethtool support.
+
+ It does not support the link failover and network management
+ features that "portable" vendor supplied sk98lin driver does.
+
+ This driver supports adapters based on the original Yukon chipset:
+ Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
+ Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
+
+ It does not support the newer Yukon2 chipset: a separate driver,
+ sky2, is provided for these adapters.
+
+ To compile this driver as a module, choose M here: the module
+ will be called skge. This is recommended.
+
+config SKGE_DEBUG
+ bool "Debugging interface"
+ depends on SKGE && DEBUG_FS
+ ---help---
+ This option adds the ability to dump driver state for debugging.
+ The file /sys/kernel/debug/skge/ethX displays the state of the internal
+ transmit and receive rings.
+
+ If unsure, say N.
+
+config SKGE_GENESIS
+ bool "Support for older SysKonnect Genesis boards"
+ depends on SKGE
+ ---help---
+ This enables support for the older and uncommon SysKonnect Genesis
+ chips, which support MII via an external transceiver, instead of
+ an internal one. Disabling this option will save some memory
+ by making code smaller. If unsure say Y.
+
+config SKY2
+ tristate "Marvell Yukon 2 support"
+ depends on PCI
+ select CRC32
+ ---help---
+ This driver supports Gigabit Ethernet adapters based on the
+ Marvell Yukon 2 chipset:
+ Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
+ 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
+
+ There is companion driver for the older Marvell Yukon and
+ SysKonnect Genesis based adapters: skge.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sky2. This is recommended.
+
+config SKY2_DEBUG
+ bool "Debugging interface"
+ depends on SKY2 && DEBUG_FS
+ ---help---
+ This option adds the ability to dump driver state for debugging.
+ The file /sys/kernel/debug/sky2/ethX displays the state of the internal
+ transmit and receive rings.
+
+ If unsure, say N.
+
+endif # NET_VENDOR_MARVELL