summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/net/dsa/mv88e6131.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/net/dsa/mv88e6131.c')
-rw-r--r--kernel/drivers/net/dsa/mv88e6131.c216
1 files changed, 37 insertions, 179 deletions
diff --git a/kernel/drivers/net/dsa/mv88e6131.c b/kernel/drivers/net/dsa/mv88e6131.c
index e54824fa0..a92ca651c 100644
--- a/kernel/drivers/net/dsa/mv88e6131.c
+++ b/kernel/drivers/net/dsa/mv88e6131.c
@@ -17,213 +17,78 @@
#include <net/dsa.h>
#include "mv88e6xxx.h"
+static const struct mv88e6xxx_switch_id mv88e6131_table[] = {
+ { PORT_SWITCH_ID_6085, "Marvell 88E6085" },
+ { PORT_SWITCH_ID_6095, "Marvell 88E6095/88E6095F" },
+ { PORT_SWITCH_ID_6131, "Marvell 88E6131" },
+ { PORT_SWITCH_ID_6131_B2, "Marvell 88E6131 (B2)" },
+ { PORT_SWITCH_ID_6185, "Marvell 88E6185" },
+};
+
static char *mv88e6131_probe(struct device *host_dev, int sw_addr)
{
- struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
- int ret;
-
- if (bus == NULL)
- return NULL;
-
- ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), PORT_SWITCH_ID);
- if (ret >= 0) {
- int ret_masked = ret & 0xfff0;
-
- if (ret_masked == PORT_SWITCH_ID_6085)
- return "Marvell 88E6085";
- if (ret_masked == PORT_SWITCH_ID_6095)
- return "Marvell 88E6095/88E6095F";
- if (ret == PORT_SWITCH_ID_6131_B2)
- return "Marvell 88E6131 (B2)";
- if (ret_masked == PORT_SWITCH_ID_6131)
- return "Marvell 88E6131";
- }
-
- return NULL;
+ return mv88e6xxx_lookup_name(host_dev, sw_addr, mv88e6131_table,
+ ARRAY_SIZE(mv88e6131_table));
}
static int mv88e6131_setup_global(struct dsa_switch *ds)
{
+ u32 upstream_port = dsa_upstream_port(ds);
int ret;
- int i;
+ u32 reg;
+
+ ret = mv88e6xxx_setup_global(ds);
+ if (ret)
+ return ret;
/* Enable the PHY polling unit, don't discard packets with
* excessive collisions, use a weighted fair queueing scheme
* to arbitrate between packet queues, set the maximum frame
* size to 1632, and mask all interrupt sources.
*/
- REG_WRITE(REG_GLOBAL, 0x04, 0x4400);
-
- /* Set the default address aging time to 5 minutes, and
- * enable address learn messages to be sent to all message
- * ports.
- */
- REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
-
- /* Configure the priority mapping registers. */
- ret = mv88e6xxx_config_prio(ds);
- if (ret < 0)
- return ret;
+ REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL,
+ GLOBAL_CONTROL_PPU_ENABLE | GLOBAL_CONTROL_MAX_FRAME_1632);
/* Set the VLAN ethertype to 0x8100. */
- REG_WRITE(REG_GLOBAL, 0x19, 0x8100);
+ REG_WRITE(REG_GLOBAL, GLOBAL_CORE_TAG_TYPE, 0x8100);
/* Disable ARP mirroring, and configure the upstream port as
* the port to which ingress and egress monitor frames are to
* be sent.
*/
- REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1100) | 0x00f0);
+ reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT |
+ upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT |
+ GLOBAL_MONITOR_CONTROL_ARP_DISABLED;
+ REG_WRITE(REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
/* Disable cascade port functionality unless this device
* is used in a cascade configuration, and set the switch's
* DSA device number.
*/
if (ds->dst->pd->nr_chips > 1)
- REG_WRITE(REG_GLOBAL, 0x1c, 0xf000 | (ds->index & 0x1f));
+ REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL_2,
+ GLOBAL_CONTROL_2_MULTIPLE_CASCADE |
+ (ds->index & 0x1f));
else
- REG_WRITE(REG_GLOBAL, 0x1c, 0xe000 | (ds->index & 0x1f));
-
- /* Send all frames with destination addresses matching
- * 01:80:c2:00:00:0x to the CPU port.
- */
- REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
-
- /* Ignore removed tag data on doubly tagged packets, disable
- * flow control messages, force flow control priority to the
- * highest, and send all special multicast frames to the CPU
- * port at the highest priority.
- */
- REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
-
- /* Program the DSA routing table. */
- for (i = 0; i < 32; i++) {
- int nexthop;
-
- nexthop = 0x1f;
- if (ds->pd->rtable &&
- i != ds->index && i < ds->dst->pd->nr_chips)
- nexthop = ds->pd->rtable[i] & 0x1f;
-
- REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
- }
-
- /* Clear all trunk masks. */
- for (i = 0; i < 8; i++)
- REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0x7ff);
-
- /* Clear all trunk mappings. */
- for (i = 0; i < 16; i++)
- REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
+ REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL_2,
+ GLOBAL_CONTROL_2_NO_CASCADE |
+ (ds->index & 0x1f));
/* Force the priority of IGMP/MLD snoop frames and ARP frames
* to the highest setting.
*/
- REG_WRITE(REG_GLOBAL2, 0x0f, 0x00ff);
+ REG_WRITE(REG_GLOBAL2, GLOBAL2_PRIO_OVERRIDE,
+ GLOBAL2_PRIO_OVERRIDE_FORCE_SNOOP |
+ 7 << GLOBAL2_PRIO_OVERRIDE_SNOOP_SHIFT |
+ GLOBAL2_PRIO_OVERRIDE_FORCE_ARP |
+ 7 << GLOBAL2_PRIO_OVERRIDE_ARP_SHIFT);
return 0;
}
-static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
-{
- struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
- int addr = REG_PORT(p);
- u16 val;
-
- /* MAC Forcing register: don't force link, speed, duplex
- * or flow control state to any particular values on physical
- * ports, but force the CPU port and all DSA ports to 1000 Mb/s
- * (100 Mb/s on 6085) full duplex.
- */
- if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
- if (ps->id == PORT_SWITCH_ID_6085)
- REG_WRITE(addr, 0x01, 0x003d); /* 100 Mb/s */
- else
- REG_WRITE(addr, 0x01, 0x003e); /* 1000 Mb/s */
- else
- REG_WRITE(addr, 0x01, 0x0003);
-
- /* Port Control: disable Core Tag, disable Drop-on-Lock,
- * transmit frames unmodified, disable Header mode,
- * enable IGMP/MLD snoop, disable DoubleTag, disable VLAN
- * tunneling, determine priority by looking at 802.1p and
- * IP priority fields (IP prio has precedence), and set STP
- * state to Forwarding.
- *
- * If this is the upstream port for this switch, enable
- * forwarding of unknown unicasts, and enable DSA tagging
- * mode.
- *
- * If this is the link to another switch, use DSA tagging
- * mode, but do not enable forwarding of unknown unicasts.
- */
- val = 0x0433;
- if (p == dsa_upstream_port(ds)) {
- val |= 0x0104;
- /* On 6085, unknown multicast forward is controlled
- * here rather than in Port Control 2 register.
- */
- if (ps->id == PORT_SWITCH_ID_6085)
- val |= 0x0008;
- }
- if (ds->dsa_port_mask & (1 << p))
- val |= 0x0100;
- REG_WRITE(addr, 0x04, val);
-
- /* Port Control 2: don't force a good FCS, don't use
- * VLAN-based, source address-based or destination
- * address-based priority overrides, don't let the switch
- * add or strip 802.1q tags, don't discard tagged or
- * untagged frames on this port, do a destination address
- * lookup on received packets as usual, don't send a copy
- * of all transmitted/received frames on this port to the
- * CPU, and configure the upstream port number.
- *
- * If this is the upstream port for this switch, enable
- * forwarding of unknown multicast addresses.
- */
- if (ps->id == PORT_SWITCH_ID_6085)
- /* on 6085, bits 3:0 are reserved, bit 6 control ARP
- * mirroring, and multicast forward is handled in
- * Port Control register.
- */
- REG_WRITE(addr, 0x08, 0x0080);
- else {
- val = 0x0080 | dsa_upstream_port(ds);
- if (p == dsa_upstream_port(ds))
- val |= 0x0040;
- REG_WRITE(addr, 0x08, val);
- }
-
- /* Rate Control: disable ingress rate limiting. */
- REG_WRITE(addr, 0x09, 0x0000);
-
- /* Rate Control 2: disable egress rate limiting. */
- REG_WRITE(addr, 0x0a, 0x0000);
-
- /* Port Association Vector: when learning source addresses
- * of packets, add the address to the address database using
- * a port bitmap that has only the bit for this port set and
- * the other bits clear.
- */
- REG_WRITE(addr, 0x0b, 1 << p);
-
- /* Tag Remap: use an identity 802.1p prio -> switch prio
- * mapping.
- */
- REG_WRITE(addr, 0x18, 0x3210);
-
- /* Tag Remap 2: use an identity 802.1p prio -> switch prio
- * mapping.
- */
- REG_WRITE(addr, 0x19, 0x7654);
-
- return mv88e6xxx_setup_port_common(ds, p);
-}
-
static int mv88e6131_setup(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
- int i;
int ret;
ret = mv88e6xxx_setup_common(ds);
@@ -234,6 +99,7 @@ static int mv88e6131_setup(struct dsa_switch *ds)
switch (ps->id) {
case PORT_SWITCH_ID_6085:
+ case PORT_SWITCH_ID_6185:
ps->num_ports = 10;
break;
case PORT_SWITCH_ID_6095:
@@ -251,19 +117,11 @@ static int mv88e6131_setup(struct dsa_switch *ds)
if (ret < 0)
return ret;
- /* @@@ initialise vtu and atu */
-
ret = mv88e6131_setup_global(ds);
if (ret < 0)
return ret;
- for (i = 0; i < ps->num_ports; i++) {
- ret = mv88e6131_setup_port(ds, i);
- if (ret < 0)
- return ret;
- }
-
- return 0;
+ return mv88e6xxx_setup_ports(ds);
}
static int mv88e6131_port_to_phy_addr(struct dsa_switch *ds, int port)
@@ -307,10 +165,10 @@ struct dsa_switch_driver mv88e6131_switch_driver = {
.set_addr = mv88e6xxx_set_addr_direct,
.phy_read = mv88e6131_phy_read,
.phy_write = mv88e6131_phy_write,
- .poll_link = mv88e6xxx_poll_link,
.get_strings = mv88e6xxx_get_strings,
.get_ethtool_stats = mv88e6xxx_get_ethtool_stats,
.get_sset_count = mv88e6xxx_get_sset_count,
+ .adjust_link = mv88e6xxx_adjust_link,
};
MODULE_ALIAS("platform:mv88e6085");