summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/input/misc/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/input/misc/Kconfig')
-rw-r--r--kernel/drivers/input/misc/Kconfig789
1 files changed, 789 insertions, 0 deletions
diff --git a/kernel/drivers/input/misc/Kconfig b/kernel/drivers/input/misc/Kconfig
new file mode 100644
index 000000000..4436ab1b9
--- /dev/null
+++ b/kernel/drivers/input/misc/Kconfig
@@ -0,0 +1,789 @@
+#
+# Input misc drivers configuration
+#
+menuconfig INPUT_MISC
+ bool "Miscellaneous devices"
+ help
+ Say Y here, and a list of miscellaneous input drivers will be displayed.
+ Everything that didn't fit into the other categories is here. This option
+ doesn't affect the kernel.
+
+ If unsure, say Y.
+
+if INPUT_MISC
+
+config INPUT_88PM860X_ONKEY
+ tristate "88PM860x ONKEY support"
+ depends on MFD_88PM860X
+ help
+ Support the ONKEY of Marvell 88PM860x PMICs as an input device
+ reporting power button status.
+
+ To compile this driver as a module, choose M here: the module
+ will be called 88pm860x_onkey.
+
+config INPUT_88PM80X_ONKEY
+ tristate "88PM80x ONKEY support"
+ depends on MFD_88PM800
+ help
+ Support the ONKEY of Marvell 88PM80x PMICs as an input device
+ reporting power button status.
+
+ To compile this driver as a module, choose M here: the module
+ will be called 88pm80x_onkey.
+
+config INPUT_AB8500_PONKEY
+ tristate "AB8500 Pon (PowerOn) Key"
+ depends on AB8500_CORE
+ help
+ Say Y here to use the PowerOn Key for ST-Ericsson's AB8500
+ Mix-Sig PMIC.
+
+ To compile this driver as a module, choose M here: the module
+ will be called ab8500-ponkey.
+
+config INPUT_AD714X
+ tristate "Analog Devices AD714x Capacitance Touch Sensor"
+ help
+ Say Y here if you want to support an AD7142/3/7/8/7A touch sensor.
+
+ You should select a bus connection too.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad714x.
+
+config INPUT_AD714X_I2C
+ tristate "support I2C bus connection"
+ depends on INPUT_AD714X && I2C
+ default y
+ help
+ Say Y here if you have AD7142/AD7147 hooked to an I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad714x-i2c.
+
+config INPUT_AD714X_SPI
+ tristate "support SPI bus connection"
+ depends on INPUT_AD714X && SPI
+ default y
+ help
+ Say Y here if you have AD7142/AD7147 hooked to a SPI bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad714x-spi.
+
+config INPUT_ARIZONA_HAPTICS
+ tristate "Arizona haptics support"
+ depends on MFD_ARIZONA && SND_SOC
+ select INPUT_FF_MEMLESS
+ help
+ Say Y to enable support for the haptics module in Arizona CODECs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called arizona-haptics.
+
+config INPUT_BMA150
+ tristate "BMA150/SMB380 acceleration sensor support"
+ depends on I2C
+ select INPUT_POLLDEV
+ help
+ Say Y here if you have Bosch Sensortec's BMA150 or SMB380
+ acceleration sensor hooked to an I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bma150.
+
+config INPUT_E3X0_BUTTON
+ tristate "NI Ettus Research USRP E3x0 Button support."
+ default n
+ help
+ Say Y here to enable support for the NI Ettus Research
+ USRP E3x0 Button.
+
+ To compile this driver as a module, choose M here: the
+ module will be called e3x0_button.
+
+config INPUT_PCSPKR
+ tristate "PC Speaker support"
+ depends on PCSPKR_PLATFORM
+ help
+ Say Y here if you want the standard PC Speaker to be used for
+ bells and whistles.
+
+ If unsure, say Y.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pcspkr.
+
+config INPUT_PM8941_PWRKEY
+ tristate "Qualcomm PM8941 power key support"
+ depends on MFD_SPMI_PMIC
+ help
+ Say Y here if you want support for the power key usually found
+ on boards using a Qualcomm PM8941 compatible PMIC.
+
+ If unsure, say Y.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pm8941-pwrkey.
+
+config INPUT_PM8XXX_VIBRATOR
+ tristate "Qualcomm PM8XXX vibrator support"
+ depends on MFD_PM8XXX
+ select INPUT_FF_MEMLESS
+ help
+ This option enables device driver support for the vibrator
+ on Qualcomm PM8xxx chip. This driver supports ff-memless interface
+ from input framework.
+
+ To compile this driver as module, choose M here: the
+ module will be called pm8xxx-vibrator.
+
+config INPUT_PMIC8XXX_PWRKEY
+ tristate "PMIC8XXX power key support"
+ depends on MFD_PM8XXX
+ help
+ Say Y here if you want support for the PMIC8XXX power key.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pmic8xxx-pwrkey.
+
+config INPUT_SPARCSPKR
+ tristate "SPARC Speaker support"
+ depends on PCI && SPARC64
+ help
+ Say Y here if you want the standard Speaker on Sparc PCI systems
+ to be used for bells and whistles.
+
+ If unsure, say Y.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sparcspkr.
+
+config INPUT_M68K_BEEP
+ tristate "M68k Beeper support"
+ depends on M68K
+
+config INPUT_MAX77693_HAPTIC
+ tristate "MAXIM MAX77693 haptic controller support"
+ depends on MFD_MAX77693 && PWM
+ select INPUT_FF_MEMLESS
+ help
+ This option enables support for the haptic controller on
+ MAXIM MAX77693 chip.
+
+ To compile this driver as module, choose M here: the
+ module will be called max77693-haptic.
+
+config INPUT_MAX77843_HAPTIC
+ tristate "MAXIM MAX77843 haptic controller support"
+ depends on MFD_MAX77843 && REGULATOR
+ select INPUT_FF_MEMLESS
+ help
+ This option enables support for the haptic controller on
+ MAXIM MAX77843 chip. The driver supports ff-memless interface
+ from input framework.
+
+ To compile this driver as module, choose M here: the
+ module will be called max77843-haptic.
+
+config INPUT_MAX8925_ONKEY
+ tristate "MAX8925 ONKEY support"
+ depends on MFD_MAX8925
+ help
+ Support the ONKEY of MAX8925 PMICs as an input device
+ reporting power button status.
+
+ To compile this driver as a module, choose M here: the module
+ will be called max8925_onkey.
+
+config INPUT_MAX8997_HAPTIC
+ tristate "MAXIM MAX8997 haptic controller support"
+ depends on PWM && MFD_MAX8997
+ select INPUT_FF_MEMLESS
+ help
+ This option enables device driver support for the haptic controller
+ on MAXIM MAX8997 chip. This driver supports ff-memless interface
+ from input framework.
+
+ To compile this driver as module, choose M here: the
+ module will be called max8997-haptic.
+
+config INPUT_MC13783_PWRBUTTON
+ tristate "MC13783 ON buttons"
+ depends on MFD_MC13XXX
+ help
+ Support the ON buttons of MC13783 PMIC as an input device
+ reporting power button status.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mc13783-pwrbutton.
+
+config INPUT_MMA8450
+ tristate "MMA8450 - Freescale's 3-Axis, 8/12-bit Digital Accelerometer"
+ depends on I2C
+ select INPUT_POLLDEV
+ help
+ Say Y here if you want to support Freescale's MMA8450 Accelerometer
+ through I2C interface.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mma8450.
+
+config INPUT_MPU3050
+ tristate "MPU3050 Triaxial gyroscope sensor"
+ depends on I2C
+ help
+ Say Y here if you want to support InvenSense MPU3050
+ connected via an I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mpu3050.
+
+config INPUT_APANEL
+ tristate "Fujitsu Lifebook Application Panel buttons"
+ depends on X86 && I2C && LEDS_CLASS
+ select INPUT_POLLDEV
+ select CHECK_SIGNATURE
+ help
+ Say Y here for support of the Application Panel buttons, used on
+ Fujitsu Lifebook. These are attached to the mainboard through
+ an SMBus interface managed by the I2C Intel ICH (i801) driver,
+ which you should also build for this kernel.
+
+ To compile this driver as a module, choose M here: the module will
+ be called apanel.
+
+config INPUT_GP2A
+ tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver"
+ depends on I2C
+ depends on GPIOLIB
+ help
+ Say Y here if you have a Sharp GP2AP002A00F proximity/als combo-chip
+ hooked to an I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gp2ap002a00f.
+
+config INPUT_GPIO_BEEPER
+ tristate "Generic GPIO Beeper support"
+ depends on GPIOLIB
+ help
+ Say Y here if you have a beeper connected to a GPIO pin.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gpio-beeper.
+
+config INPUT_GPIO_TILT_POLLED
+ tristate "Polled GPIO tilt switch"
+ depends on GPIOLIB
+ select INPUT_POLLDEV
+ help
+ This driver implements support for tilt switches connected
+ to GPIO pins that are not capable of generating interrupts.
+
+ The list of gpios to use and the mapping of their states
+ to specific angles is done via platform data.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gpio_tilt_polled.
+
+config INPUT_IXP4XX_BEEPER
+ tristate "IXP4XX Beeper support"
+ depends on ARCH_IXP4XX
+ help
+ If you say yes here, you can connect a beeper to the
+ ixp4xx gpio pins. This is used by the LinkSys NSLU2.
+
+ If unsure, say Y.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ixp4xx-beeper.
+
+config INPUT_COBALT_BTNS
+ tristate "Cobalt button interface"
+ depends on MIPS_COBALT
+ select INPUT_POLLDEV
+ help
+ Say Y here if you want to support MIPS Cobalt button interface.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cobalt_btns.
+
+config INPUT_WISTRON_BTNS
+ tristate "x86 Wistron laptop button interface"
+ depends on X86_32
+ select INPUT_POLLDEV
+ select INPUT_SPARSEKMAP
+ select NEW_LEDS
+ select LEDS_CLASS
+ select CHECK_SIGNATURE
+ help
+ Say Y here for support of Wistron laptop button interfaces, used on
+ laptops of various brands, including Acer and Fujitsu-Siemens. If
+ available, mail and wifi LEDs will be controllable via /sys/class/leds.
+
+ To compile this driver as a module, choose M here: the module will
+ be called wistron_btns.
+
+config INPUT_ATLAS_BTNS
+ tristate "x86 Atlas button interface"
+ depends on X86 && ACPI
+ help
+ Say Y here for support of Atlas wallmount touchscreen buttons.
+ The events will show up as scancodes F1 through F9 via evdev.
+
+ To compile this driver as a module, choose M here: the module will
+ be called atlas_btns.
+
+config INPUT_ATI_REMOTE2
+ tristate "ATI / Philips USB RF remote control"
+ depends on USB_ARCH_HAS_HCD
+ select USB
+ help
+ Say Y here if you want to use an ATI or Philips USB RF remote control.
+ These are RF remotes with USB receivers.
+ ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards
+ and is also available as a separate product.
+ This driver provides mouse pointer, left and right mouse buttons,
+ and maps all the other remote buttons to keypress events.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ati_remote2.
+
+config INPUT_KEYSPAN_REMOTE
+ tristate "Keyspan DMR USB remote control"
+ depends on USB_ARCH_HAS_HCD
+ select USB
+ help
+ Say Y here if you want to use a Keyspan DMR USB remote control.
+ Currently only the UIA-11 type of receiver has been tested. The tag
+ on the receiver that connects to the USB port should have a P/N that
+ will tell you what type of DMR you have. The UIA-10 type is not
+ supported at this time. This driver maps all buttons to keypress
+ events.
+
+ To compile this driver as a module, choose M here: the module will
+ be called keyspan_remote.
+
+config INPUT_KXTJ9
+ tristate "Kionix KXTJ9 tri-axis digital accelerometer"
+ depends on I2C
+ help
+ Say Y here to enable support for the Kionix KXTJ9 digital tri-axis
+ accelerometer.
+
+ To compile this driver as a module, choose M here: the module will
+ be called kxtj9.
+
+config INPUT_KXTJ9_POLLED_MODE
+ bool "Enable polling mode support"
+ depends on INPUT_KXTJ9
+ select INPUT_POLLDEV
+ help
+ Say Y here if you need accelerometer to work in polling mode.
+
+config INPUT_POWERMATE
+ tristate "Griffin PowerMate and Contour Jog support"
+ depends on USB_ARCH_HAS_HCD
+ select USB
+ help
+ Say Y here if you want to use Griffin PowerMate or Contour Jog devices.
+ These are aluminum dials which can measure clockwise and anticlockwise
+ rotation. The dial also acts as a pushbutton. The base contains an LED
+ which can be instructed to pulse or to switch to a particular intensity.
+
+ You can download userspace tools from
+ <http://sowerbutts.com/powermate/>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called powermate.
+
+config INPUT_YEALINK
+ tristate "Yealink usb-p1k voip phone"
+ depends on USB_ARCH_HAS_HCD
+ select USB
+ help
+ Say Y here if you want to enable keyboard and LCD functions of the
+ Yealink usb-p1k usb phones. The audio part is enabled by the generic
+ usb sound driver, so you might want to enable that as well.
+
+ For information about how to use these additional functions, see
+ <file:Documentation/input/yealink.txt>.
+
+ To compile this driver as a module, choose M here: the module will be
+ called yealink.
+
+config INPUT_CM109
+ tristate "C-Media CM109 USB I/O Controller"
+ depends on USB_ARCH_HAS_HCD
+ select USB
+ help
+ Say Y here if you want to enable keyboard and buzzer functions of the
+ C-Media CM109 usb phones. The audio part is enabled by the generic
+ usb sound driver, so you might want to enable that as well.
+
+ To compile this driver as a module, choose M here: the module will be
+ called cm109.
+
+config INPUT_REGULATOR_HAPTIC
+ tristate "Regulator haptics support"
+ depends on REGULATOR
+ select INPUT_FF_MEMLESS
+ help
+ This option enables device driver support for the haptic controlled
+ by a regulator. This driver supports ff-memless interface
+ from input framework.
+
+ To compile this driver as a module, choose M here: the
+ module will be called regulator-haptic.
+
+config INPUT_RETU_PWRBUTTON
+ tristate "Retu Power button Driver"
+ depends on MFD_RETU
+ help
+ Say Y here if you want to enable power key reporting via the
+ Retu chips found in Nokia Internet Tablets (770, N800, N810).
+
+ To compile this driver as a module, choose M here. The module will
+ be called retu-pwrbutton.
+
+config INPUT_TPS65218_PWRBUTTON
+ tristate "TPS65218 Power button driver"
+ depends on MFD_TPS65218
+ help
+ Say Y here if you want to enable power buttong reporting for
+ the TPS65218 Power Management IC device.
+
+ To compile this driver as a module, choose M here. The module will
+ be called tps65218-pwrbutton.
+
+config INPUT_AXP20X_PEK
+ tristate "X-Powers AXP20X power button driver"
+ depends on MFD_AXP20X
+ help
+ Say Y here if you want to enable power key reporting via the
+ AXP20X PMIC.
+
+ To compile this driver as a module, choose M here. The module will
+ be called axp20x-pek.
+
+
+config INPUT_TWL4030_PWRBUTTON
+ tristate "TWL4030 Power button Driver"
+ depends on TWL4030_CORE
+ help
+ Say Y here if you want to enable power key reporting via the
+ TWL4030 family of chips.
+
+ To compile this driver as a module, choose M here. The module will
+ be called twl4030_pwrbutton.
+
+config INPUT_TWL4030_VIBRA
+ tristate "Support for TWL4030 Vibrator"
+ depends on TWL4030_CORE
+ select MFD_TWL4030_AUDIO
+ select INPUT_FF_MEMLESS
+ help
+ This option enables support for TWL4030 Vibrator Driver.
+
+ To compile this driver as a module, choose M here. The module will
+ be called twl4030_vibra.
+
+config INPUT_TWL6040_VIBRA
+ tristate "Support for TWL6040 Vibrator"
+ depends on TWL6040_CORE
+ select INPUT_FF_MEMLESS
+ help
+ This option enables support for TWL6040 Vibrator Driver.
+
+ To compile this driver as a module, choose M here. The module will
+ be called twl6040_vibra.
+
+config INPUT_UINPUT
+ tristate "User level driver support"
+ help
+ Say Y here if you want to support user level drivers for input
+ subsystem accessible under char device 10:223 - /dev/input/uinput.
+
+ To compile this driver as a module, choose M here: the
+ module will be called uinput.
+
+config INPUT_SGI_BTNS
+ tristate "SGI Indy/O2 volume button interface"
+ depends on SGI_IP22 || SGI_IP32
+ select INPUT_POLLDEV
+ help
+ Say Y here if you want to support SGI Indy/O2 volume button interface.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sgi_btns.
+
+config HP_SDC_RTC
+ tristate "HP SDC Real Time Clock"
+ depends on (GSC || HP300) && SERIO
+ select HP_SDC
+ help
+ Say Y here if you want to support the built-in real time clock
+ of the HP SDC controller.
+
+config INPUT_PALMAS_PWRBUTTON
+ tristate "Palmas Power button Driver"
+ depends on MFD_PALMAS
+ help
+ Say Y here if you want to enable power key reporting via the
+ Palmas family of PMICs.
+
+ To compile this driver as a module, choose M here. The module will
+ be called palmas_pwrbutton.
+
+config INPUT_PCF50633_PMU
+ tristate "PCF50633 PMU events"
+ depends on MFD_PCF50633
+ help
+ Say Y to include support for delivering PMU events via input
+ layer on NXP PCF50633.
+
+config INPUT_PCF8574
+ tristate "PCF8574 Keypad input device"
+ depends on I2C
+ help
+ Say Y here if you want to support a keypad connected via I2C
+ with a PCF8574.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pcf8574_keypad.
+
+config INPUT_PWM_BEEPER
+ tristate "PWM beeper support"
+ depends on PWM
+ help
+ Say Y here to get support for PWM based beeper devices.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the module will be
+ called pwm-beeper.
+
+config INPUT_GPIO_ROTARY_ENCODER
+ tristate "Rotary encoders connected to GPIO pins"
+ depends on GPIOLIB
+ help
+ Say Y here to add support for rotary encoders connected to GPIO lines.
+ Check file:Documentation/input/rotary-encoder.txt for more
+ information.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rotary_encoder.
+
+config INPUT_RB532_BUTTON
+ tristate "Mikrotik Routerboard 532 button interface"
+ depends on MIKROTIK_RB532
+ depends on GPIOLIB
+ select INPUT_POLLDEV
+ help
+ Say Y here if you want support for the S1 button built into
+ Mikrotik's Routerboard 532.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rb532_button.
+
+config INPUT_DA9052_ONKEY
+ tristate "Dialog DA9052/DA9053 Onkey"
+ depends on PMIC_DA9052
+ help
+ Support the ONKEY of Dialog DA9052 PMICs as an input device
+ reporting power button status.
+
+ To compile this driver as a module, choose M here: the
+ module will be called da9052_onkey.
+
+config INPUT_DA9055_ONKEY
+ tristate "Dialog Semiconductor DA9055 ONKEY"
+ depends on MFD_DA9055
+ help
+ Support the ONKEY of DA9055 PMICs as an input device
+ reporting power button status.
+
+ To compile this driver as a module, choose M here: the module
+ will be called da9055_onkey.
+
+config INPUT_DM355EVM
+ tristate "TI DaVinci DM355 EVM Keypad and IR Remote"
+ depends on MFD_DM355EVM_MSP
+ select INPUT_SPARSEKMAP
+ help
+ Supports the pushbuttons and IR remote used with
+ the DM355 EVM board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dm355evm_keys.
+
+config INPUT_BFIN_ROTARY
+ tristate "Blackfin Rotary support"
+ depends on BF54x || BF52x
+ help
+ Say Y here if you want to use the Blackfin Rotary.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bfin-rotary.
+
+config INPUT_WM831X_ON
+ tristate "WM831X ON pin"
+ depends on MFD_WM831X
+ help
+ Support the ON pin of WM831X PMICs as an input device
+ reporting power button status.
+
+ To compile this driver as a module, choose M here: the module
+ will be called wm831x_on.
+
+config INPUT_PCAP
+ tristate "Motorola EZX PCAP misc input events"
+ depends on EZX_PCAP
+ help
+ Say Y here if you want to use Power key and Headphone button
+ on Motorola EZX phones.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pcap_keys.
+
+config INPUT_ADXL34X
+ tristate "Analog Devices ADXL34x Three-Axis Digital Accelerometer"
+ default n
+ help
+ Say Y here if you have a Accelerometer interface using the
+ ADXL345/6 controller, and your board-specific initialization
+ code includes that in its table of devices.
+
+ This driver can use either I2C or SPI communication to the
+ ADXL345/6 controller. Select the appropriate method for
+ your system.
+
+ If unsure, say N (but it's safe to say "Y").
+
+ To compile this driver as a module, choose M here: the
+ module will be called adxl34x.
+
+config INPUT_ADXL34X_I2C
+ tristate "support I2C bus connection"
+ depends on INPUT_ADXL34X && I2C
+ default y
+ help
+ Say Y here if you have ADXL345/6 hooked to an I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adxl34x-i2c.
+
+config INPUT_ADXL34X_SPI
+ tristate "support SPI bus connection"
+ depends on INPUT_ADXL34X && SPI
+ default y
+ help
+ Say Y here if you have ADXL345/6 hooked to a SPI bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adxl34x-spi.
+
+config INPUT_IMS_PCU
+ tristate "IMS Passenger Control Unit driver"
+ depends on USB
+ depends on LEDS_CLASS
+ help
+ Say Y here if you have system with IMS Rave Passenger Control Unit.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ims_pcu.
+
+config INPUT_CMA3000
+ tristate "VTI CMA3000 Tri-axis accelerometer"
+ help
+ Say Y here if you want to use VTI CMA3000_D0x Accelerometer
+ driver
+
+ This driver currently only supports I2C interface to the
+ controller. Also select the I2C method.
+
+ If unsure, say N
+
+ To compile this driver as a module, choose M here: the
+ module will be called cma3000_d0x.
+
+config INPUT_CMA3000_I2C
+ tristate "Support I2C bus connection"
+ depends on INPUT_CMA3000 && I2C
+ help
+ Say Y here if you want to use VTI CMA3000_D0x Accelerometer
+ through I2C interface.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cma3000_d0x_i2c.
+
+config INPUT_XEN_KBDDEV_FRONTEND
+ tristate "Xen virtual keyboard and mouse support"
+ depends on XEN
+ default y
+ select XEN_XENBUS_FRONTEND
+ help
+ This driver implements the front-end of the Xen virtual
+ keyboard and mouse device driver. It communicates with a back-end
+ in another domain.
+
+ To compile this driver as a module, choose M here: the
+ module will be called xen-kbdfront.
+
+config INPUT_SIRFSOC_ONKEY
+ bool "CSR SiRFSoC power on/off/suspend key support"
+ depends on ARCH_SIRF && OF
+ default y
+ help
+ Say Y here if you want to support for the SiRFSoC power on/off/suspend key
+ in Linux, after you press the onkey, system will suspend.
+
+ If unsure, say N.
+
+config INPUT_IDEAPAD_SLIDEBAR
+ tristate "IdeaPad Laptop Slidebar"
+ depends on INPUT
+ depends on SERIO_I8042
+ help
+ Say Y here if you have an IdeaPad laptop with a slidebar.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ideapad_slidebar.
+
+config INPUT_SOC_BUTTON_ARRAY
+ tristate "Windows-compatible SoC Button Array"
+ depends on KEYBOARD_GPIO
+ help
+ Say Y here if you have a SoC-based tablet that originally
+ runs Windows 8.
+
+ To compile this driver as a module, choose M here: the
+ module will be called soc_button_array.
+
+config INPUT_DRV260X_HAPTICS
+ tristate "TI DRV260X haptics support"
+ depends on INPUT && I2C && GPIOLIB
+ select INPUT_FF_MEMLESS
+ select REGMAP_I2C
+ help
+ Say Y to enable support for the TI DRV260X haptics driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called drv260x-haptics.
+
+config INPUT_DRV2667_HAPTICS
+ tristate "TI DRV2667 haptics support"
+ depends on INPUT && I2C
+ select INPUT_FF_MEMLESS
+ select REGMAP_I2C
+ help
+ Say Y to enable support for the TI DRV2667 haptics driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called drv260x-haptics.
+
+endif