summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/char/tpm/tpm_infineon.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/char/tpm/tpm_infineon.c')
-rw-r--r--kernel/drivers/char/tpm/tpm_infineon.c629
1 files changed, 629 insertions, 0 deletions
diff --git a/kernel/drivers/char/tpm/tpm_infineon.c b/kernel/drivers/char/tpm/tpm_infineon.c
new file mode 100644
index 000000000..6c488e635
--- /dev/null
+++ b/kernel/drivers/char/tpm/tpm_infineon.c
@@ -0,0 +1,629 @@
+/*
+ * Description:
+ * Device Driver for the Infineon Technologies
+ * SLD 9630 TT 1.1 and SLB 9635 TT 1.2 Trusted Platform Module
+ * Specifications at www.trustedcomputinggroup.org
+ *
+ * Copyright (C) 2005, Marcel Selhorst <tpmdd@selhorst.net>
+ * Sirrix AG - security technologies <tpmdd@sirrix.com> and
+ * Applied Data Security Group, Ruhr-University Bochum, Germany
+ * Project-Homepage: http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include <linux/init.h>
+#include <linux/pnp.h>
+#include "tpm.h"
+
+/* Infineon specific definitions */
+/* maximum number of WTX-packages */
+#define TPM_MAX_WTX_PACKAGES 50
+/* msleep-Time for WTX-packages */
+#define TPM_WTX_MSLEEP_TIME 20
+/* msleep-Time --> Interval to check status register */
+#define TPM_MSLEEP_TIME 3
+/* gives number of max. msleep()-calls before throwing timeout */
+#define TPM_MAX_TRIES 5000
+#define TPM_INFINEON_DEV_VEN_VALUE 0x15D1
+
+#define TPM_INF_IO_PORT 0x0
+#define TPM_INF_IO_MEM 0x1
+
+#define TPM_INF_ADDR 0x0
+#define TPM_INF_DATA 0x1
+
+struct tpm_inf_dev {
+ int iotype;
+
+ void __iomem *mem_base; /* MMIO ioremap'd addr */
+ unsigned long map_base; /* phys MMIO base */
+ unsigned long map_size; /* MMIO region size */
+ unsigned int index_off; /* index register offset */
+
+ unsigned int data_regs; /* Data registers */
+ unsigned int data_size;
+
+ unsigned int config_port; /* IO Port config index reg */
+ unsigned int config_size;
+};
+
+static struct tpm_inf_dev tpm_dev;
+
+static inline void tpm_data_out(unsigned char data, unsigned char offset)
+{
+ if (tpm_dev.iotype == TPM_INF_IO_PORT)
+ outb(data, tpm_dev.data_regs + offset);
+ else
+ writeb(data, tpm_dev.mem_base + tpm_dev.data_regs + offset);
+}
+
+static inline unsigned char tpm_data_in(unsigned char offset)
+{
+ if (tpm_dev.iotype == TPM_INF_IO_PORT)
+ return inb(tpm_dev.data_regs + offset);
+ else
+ return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset);
+}
+
+static inline void tpm_config_out(unsigned char data, unsigned char offset)
+{
+ if (tpm_dev.iotype == TPM_INF_IO_PORT)
+ outb(data, tpm_dev.config_port + offset);
+ else
+ writeb(data, tpm_dev.mem_base + tpm_dev.index_off + offset);
+}
+
+static inline unsigned char tpm_config_in(unsigned char offset)
+{
+ if (tpm_dev.iotype == TPM_INF_IO_PORT)
+ return inb(tpm_dev.config_port + offset);
+ else
+ return readb(tpm_dev.mem_base + tpm_dev.index_off + offset);
+}
+
+/* TPM header definitions */
+enum infineon_tpm_header {
+ TPM_VL_VER = 0x01,
+ TPM_VL_CHANNEL_CONTROL = 0x07,
+ TPM_VL_CHANNEL_PERSONALISATION = 0x0A,
+ TPM_VL_CHANNEL_TPM = 0x0B,
+ TPM_VL_CONTROL = 0x00,
+ TPM_INF_NAK = 0x15,
+ TPM_CTRL_WTX = 0x10,
+ TPM_CTRL_WTX_ABORT = 0x18,
+ TPM_CTRL_WTX_ABORT_ACK = 0x18,
+ TPM_CTRL_ERROR = 0x20,
+ TPM_CTRL_CHAININGACK = 0x40,
+ TPM_CTRL_CHAINING = 0x80,
+ TPM_CTRL_DATA = 0x04,
+ TPM_CTRL_DATA_CHA = 0x84,
+ TPM_CTRL_DATA_CHA_ACK = 0xC4
+};
+
+enum infineon_tpm_register {
+ WRFIFO = 0x00,
+ RDFIFO = 0x01,
+ STAT = 0x02,
+ CMD = 0x03
+};
+
+enum infineon_tpm_command_bits {
+ CMD_DIS = 0x00,
+ CMD_LP = 0x01,
+ CMD_RES = 0x02,
+ CMD_IRQC = 0x06
+};
+
+enum infineon_tpm_status_bits {
+ STAT_XFE = 0x00,
+ STAT_LPA = 0x01,
+ STAT_FOK = 0x02,
+ STAT_TOK = 0x03,
+ STAT_IRQA = 0x06,
+ STAT_RDA = 0x07
+};
+
+/* some outgoing values */
+enum infineon_tpm_values {
+ CHIP_ID1 = 0x20,
+ CHIP_ID2 = 0x21,
+ TPM_DAR = 0x30,
+ RESET_LP_IRQC_DISABLE = 0x41,
+ ENABLE_REGISTER_PAIR = 0x55,
+ IOLIMH = 0x60,
+ IOLIML = 0x61,
+ DISABLE_REGISTER_PAIR = 0xAA,
+ IDVENL = 0xF1,
+ IDVENH = 0xF2,
+ IDPDL = 0xF3,
+ IDPDH = 0xF4
+};
+
+static int number_of_wtx;
+
+static int empty_fifo(struct tpm_chip *chip, int clear_wrfifo)
+{
+ int status;
+ int check = 0;
+ int i;
+
+ if (clear_wrfifo) {
+ for (i = 0; i < 4096; i++) {
+ status = tpm_data_in(WRFIFO);
+ if (status == 0xff) {
+ if (check == 5)
+ break;
+ else
+ check++;
+ }
+ }
+ }
+ /* Note: The values which are currently in the FIFO of the TPM
+ are thrown away since there is no usage for them. Usually,
+ this has nothing to say, since the TPM will give its answer
+ immediately or will be aborted anyway, so the data here is
+ usually garbage and useless.
+ We have to clean this, because the next communication with
+ the TPM would be rubbish, if there is still some old data
+ in the Read FIFO.
+ */
+ i = 0;
+ do {
+ status = tpm_data_in(RDFIFO);
+ status = tpm_data_in(STAT);
+ i++;
+ if (i == TPM_MAX_TRIES)
+ return -EIO;
+ } while ((status & (1 << STAT_RDA)) != 0);
+ return 0;
+}
+
+static int wait(struct tpm_chip *chip, int wait_for_bit)
+{
+ int status;
+ int i;
+ for (i = 0; i < TPM_MAX_TRIES; i++) {
+ status = tpm_data_in(STAT);
+ /* check the status-register if wait_for_bit is set */
+ if (status & 1 << wait_for_bit)
+ break;
+ msleep(TPM_MSLEEP_TIME);
+ }
+ if (i == TPM_MAX_TRIES) { /* timeout occurs */
+ if (wait_for_bit == STAT_XFE)
+ dev_err(chip->pdev, "Timeout in wait(STAT_XFE)\n");
+ if (wait_for_bit == STAT_RDA)
+ dev_err(chip->pdev, "Timeout in wait(STAT_RDA)\n");
+ return -EIO;
+ }
+ return 0;
+};
+
+static void wait_and_send(struct tpm_chip *chip, u8 sendbyte)
+{
+ wait(chip, STAT_XFE);
+ tpm_data_out(sendbyte, WRFIFO);
+}
+
+ /* Note: WTX means Waiting-Time-Extension. Whenever the TPM needs more
+ calculation time, it sends a WTX-package, which has to be acknowledged
+ or aborted. This usually occurs if you are hammering the TPM with key
+ creation. Set the maximum number of WTX-packages in the definitions
+ above, if the number is reached, the waiting-time will be denied
+ and the TPM command has to be resend.
+ */
+
+static void tpm_wtx(struct tpm_chip *chip)
+{
+ number_of_wtx++;
+ dev_info(chip->pdev, "Granting WTX (%02d / %02d)\n",
+ number_of_wtx, TPM_MAX_WTX_PACKAGES);
+ wait_and_send(chip, TPM_VL_VER);
+ wait_and_send(chip, TPM_CTRL_WTX);
+ wait_and_send(chip, 0x00);
+ wait_and_send(chip, 0x00);
+ msleep(TPM_WTX_MSLEEP_TIME);
+}
+
+static void tpm_wtx_abort(struct tpm_chip *chip)
+{
+ dev_info(chip->pdev, "Aborting WTX\n");
+ wait_and_send(chip, TPM_VL_VER);
+ wait_and_send(chip, TPM_CTRL_WTX_ABORT);
+ wait_and_send(chip, 0x00);
+ wait_and_send(chip, 0x00);
+ number_of_wtx = 0;
+ msleep(TPM_WTX_MSLEEP_TIME);
+}
+
+static int tpm_inf_recv(struct tpm_chip *chip, u8 * buf, size_t count)
+{
+ int i;
+ int ret;
+ u32 size = 0;
+ number_of_wtx = 0;
+
+recv_begin:
+ /* start receiving header */
+ for (i = 0; i < 4; i++) {
+ ret = wait(chip, STAT_RDA);
+ if (ret)
+ return -EIO;
+ buf[i] = tpm_data_in(RDFIFO);
+ }
+
+ if (buf[0] != TPM_VL_VER) {
+ dev_err(chip->pdev,
+ "Wrong transport protocol implementation!\n");
+ return -EIO;
+ }
+
+ if (buf[1] == TPM_CTRL_DATA) {
+ /* size of the data received */
+ size = ((buf[2] << 8) | buf[3]);
+
+ for (i = 0; i < size; i++) {
+ wait(chip, STAT_RDA);
+ buf[i] = tpm_data_in(RDFIFO);
+ }
+
+ if ((size == 0x6D00) && (buf[1] == 0x80)) {
+ dev_err(chip->pdev, "Error handling on vendor layer!\n");
+ return -EIO;
+ }
+
+ for (i = 0; i < size; i++)
+ buf[i] = buf[i + 6];
+
+ size = size - 6;
+ return size;
+ }
+
+ if (buf[1] == TPM_CTRL_WTX) {
+ dev_info(chip->pdev, "WTX-package received\n");
+ if (number_of_wtx < TPM_MAX_WTX_PACKAGES) {
+ tpm_wtx(chip);
+ goto recv_begin;
+ } else {
+ tpm_wtx_abort(chip);
+ goto recv_begin;
+ }
+ }
+
+ if (buf[1] == TPM_CTRL_WTX_ABORT_ACK) {
+ dev_info(chip->pdev, "WTX-abort acknowledged\n");
+ return size;
+ }
+
+ if (buf[1] == TPM_CTRL_ERROR) {
+ dev_err(chip->pdev, "ERROR-package received:\n");
+ if (buf[4] == TPM_INF_NAK)
+ dev_err(chip->pdev,
+ "-> Negative acknowledgement"
+ " - retransmit command!\n");
+ return -EIO;
+ }
+ return -EIO;
+}
+
+static int tpm_inf_send(struct tpm_chip *chip, u8 * buf, size_t count)
+{
+ int i;
+ int ret;
+ u8 count_high, count_low, count_4, count_3, count_2, count_1;
+
+ /* Disabling Reset, LP and IRQC */
+ tpm_data_out(RESET_LP_IRQC_DISABLE, CMD);
+
+ ret = empty_fifo(chip, 1);
+ if (ret) {
+ dev_err(chip->pdev, "Timeout while clearing FIFO\n");
+ return -EIO;
+ }
+
+ ret = wait(chip, STAT_XFE);
+ if (ret)
+ return -EIO;
+
+ count_4 = (count & 0xff000000) >> 24;
+ count_3 = (count & 0x00ff0000) >> 16;
+ count_2 = (count & 0x0000ff00) >> 8;
+ count_1 = (count & 0x000000ff);
+ count_high = ((count + 6) & 0xffffff00) >> 8;
+ count_low = ((count + 6) & 0x000000ff);
+
+ /* Sending Header */
+ wait_and_send(chip, TPM_VL_VER);
+ wait_and_send(chip, TPM_CTRL_DATA);
+ wait_and_send(chip, count_high);
+ wait_and_send(chip, count_low);
+
+ /* Sending Data Header */
+ wait_and_send(chip, TPM_VL_VER);
+ wait_and_send(chip, TPM_VL_CHANNEL_TPM);
+ wait_and_send(chip, count_4);
+ wait_and_send(chip, count_3);
+ wait_and_send(chip, count_2);
+ wait_and_send(chip, count_1);
+
+ /* Sending Data */
+ for (i = 0; i < count; i++) {
+ wait_and_send(chip, buf[i]);
+ }
+ return count;
+}
+
+static void tpm_inf_cancel(struct tpm_chip *chip)
+{
+ /*
+ Since we are using the legacy mode to communicate
+ with the TPM, we have no cancel functions, but have
+ a workaround for interrupting the TPM through WTX.
+ */
+}
+
+static u8 tpm_inf_status(struct tpm_chip *chip)
+{
+ return tpm_data_in(STAT);
+}
+
+static const struct tpm_class_ops tpm_inf = {
+ .recv = tpm_inf_recv,
+ .send = tpm_inf_send,
+ .cancel = tpm_inf_cancel,
+ .status = tpm_inf_status,
+ .req_complete_mask = 0,
+ .req_complete_val = 0,
+};
+
+static const struct pnp_device_id tpm_inf_pnp_tbl[] = {
+ /* Infineon TPMs */
+ {"IFX0101", 0},
+ {"IFX0102", 0},
+ {"", 0}
+};
+
+MODULE_DEVICE_TABLE(pnp, tpm_inf_pnp_tbl);
+
+static int tpm_inf_pnp_probe(struct pnp_dev *dev,
+ const struct pnp_device_id *dev_id)
+{
+ int rc = 0;
+ u8 iol, ioh;
+ int vendorid[2];
+ int version[2];
+ int productid[2];
+ char chipname[20];
+ struct tpm_chip *chip;
+
+ /* read IO-ports through PnP */
+ if (pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) &&
+ !(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED)) {
+
+ tpm_dev.iotype = TPM_INF_IO_PORT;
+
+ tpm_dev.config_port = pnp_port_start(dev, 0);
+ tpm_dev.config_size = pnp_port_len(dev, 0);
+ tpm_dev.data_regs = pnp_port_start(dev, 1);
+ tpm_dev.data_size = pnp_port_len(dev, 1);
+ if ((tpm_dev.data_size < 4) || (tpm_dev.config_size < 2)) {
+ rc = -EINVAL;
+ goto err_last;
+ }
+ dev_info(&dev->dev, "Found %s with ID %s\n",
+ dev->name, dev_id->id);
+ if (!((tpm_dev.data_regs >> 8) & 0xff)) {
+ rc = -EINVAL;
+ goto err_last;
+ }
+ /* publish my base address and request region */
+ if (request_region(tpm_dev.data_regs, tpm_dev.data_size,
+ "tpm_infineon0") == NULL) {
+ rc = -EINVAL;
+ goto err_last;
+ }
+ if (request_region(tpm_dev.config_port, tpm_dev.config_size,
+ "tpm_infineon0") == NULL) {
+ release_region(tpm_dev.data_regs, tpm_dev.data_size);
+ rc = -EINVAL;
+ goto err_last;
+ }
+ } else if (pnp_mem_valid(dev, 0) &&
+ !(pnp_mem_flags(dev, 0) & IORESOURCE_DISABLED)) {
+
+ tpm_dev.iotype = TPM_INF_IO_MEM;
+
+ tpm_dev.map_base = pnp_mem_start(dev, 0);
+ tpm_dev.map_size = pnp_mem_len(dev, 0);
+
+ dev_info(&dev->dev, "Found %s with ID %s\n",
+ dev->name, dev_id->id);
+
+ /* publish my base address and request region */
+ if (request_mem_region(tpm_dev.map_base, tpm_dev.map_size,
+ "tpm_infineon0") == NULL) {
+ rc = -EINVAL;
+ goto err_last;
+ }
+
+ tpm_dev.mem_base = ioremap(tpm_dev.map_base, tpm_dev.map_size);
+ if (tpm_dev.mem_base == NULL) {
+ release_mem_region(tpm_dev.map_base, tpm_dev.map_size);
+ rc = -EINVAL;
+ goto err_last;
+ }
+
+ /*
+ * The only known MMIO based Infineon TPM system provides
+ * a single large mem region with the device config
+ * registers at the default TPM_ADDR. The data registers
+ * seem like they could be placed anywhere within the MMIO
+ * region, but lets just put them at zero offset.
+ */
+ tpm_dev.index_off = TPM_ADDR;
+ tpm_dev.data_regs = 0x0;
+ } else {
+ rc = -EINVAL;
+ goto err_last;
+ }
+
+ /* query chip for its vendor, its version number a.s.o. */
+ tpm_config_out(ENABLE_REGISTER_PAIR, TPM_INF_ADDR);
+ tpm_config_out(IDVENL, TPM_INF_ADDR);
+ vendorid[1] = tpm_config_in(TPM_INF_DATA);
+ tpm_config_out(IDVENH, TPM_INF_ADDR);
+ vendorid[0] = tpm_config_in(TPM_INF_DATA);
+ tpm_config_out(IDPDL, TPM_INF_ADDR);
+ productid[1] = tpm_config_in(TPM_INF_DATA);
+ tpm_config_out(IDPDH, TPM_INF_ADDR);
+ productid[0] = tpm_config_in(TPM_INF_DATA);
+ tpm_config_out(CHIP_ID1, TPM_INF_ADDR);
+ version[1] = tpm_config_in(TPM_INF_DATA);
+ tpm_config_out(CHIP_ID2, TPM_INF_ADDR);
+ version[0] = tpm_config_in(TPM_INF_DATA);
+
+ switch ((productid[0] << 8) | productid[1]) {
+ case 6:
+ snprintf(chipname, sizeof(chipname), " (SLD 9630 TT 1.1)");
+ break;
+ case 11:
+ snprintf(chipname, sizeof(chipname), " (SLB 9635 TT 1.2)");
+ break;
+ default:
+ snprintf(chipname, sizeof(chipname), " (unknown chip)");
+ break;
+ }
+
+ if ((vendorid[0] << 8 | vendorid[1]) == (TPM_INFINEON_DEV_VEN_VALUE)) {
+
+ /* configure TPM with IO-ports */
+ tpm_config_out(IOLIMH, TPM_INF_ADDR);
+ tpm_config_out((tpm_dev.data_regs >> 8) & 0xff, TPM_INF_DATA);
+ tpm_config_out(IOLIML, TPM_INF_ADDR);
+ tpm_config_out((tpm_dev.data_regs & 0xff), TPM_INF_DATA);
+
+ /* control if IO-ports are set correctly */
+ tpm_config_out(IOLIMH, TPM_INF_ADDR);
+ ioh = tpm_config_in(TPM_INF_DATA);
+ tpm_config_out(IOLIML, TPM_INF_ADDR);
+ iol = tpm_config_in(TPM_INF_DATA);
+
+ if ((ioh << 8 | iol) != tpm_dev.data_regs) {
+ dev_err(&dev->dev,
+ "Could not set IO-data registers to 0x%x\n",
+ tpm_dev.data_regs);
+ rc = -EIO;
+ goto err_release_region;
+ }
+
+ /* activate register */
+ tpm_config_out(TPM_DAR, TPM_INF_ADDR);
+ tpm_config_out(0x01, TPM_INF_DATA);
+ tpm_config_out(DISABLE_REGISTER_PAIR, TPM_INF_ADDR);
+
+ /* disable RESET, LP and IRQC */
+ tpm_data_out(RESET_LP_IRQC_DISABLE, CMD);
+
+ /* Finally, we're done, print some infos */
+ dev_info(&dev->dev, "TPM found: "
+ "config base 0x%lx, "
+ "data base 0x%lx, "
+ "chip version 0x%02x%02x, "
+ "vendor id 0x%x%x (Infineon), "
+ "product id 0x%02x%02x"
+ "%s\n",
+ tpm_dev.iotype == TPM_INF_IO_PORT ?
+ tpm_dev.config_port :
+ tpm_dev.map_base + tpm_dev.index_off,
+ tpm_dev.iotype == TPM_INF_IO_PORT ?
+ tpm_dev.data_regs :
+ tpm_dev.map_base + tpm_dev.data_regs,
+ version[0], version[1],
+ vendorid[0], vendorid[1],
+ productid[0], productid[1], chipname);
+
+ chip = tpmm_chip_alloc(&dev->dev, &tpm_inf);
+ if (IS_ERR(chip)) {
+ rc = PTR_ERR(chip);
+ goto err_release_region;
+ }
+
+ rc = tpm_chip_register(chip);
+ if (rc)
+ goto err_release_region;
+
+ return 0;
+ } else {
+ rc = -ENODEV;
+ goto err_release_region;
+ }
+
+err_release_region:
+ if (tpm_dev.iotype == TPM_INF_IO_PORT) {
+ release_region(tpm_dev.data_regs, tpm_dev.data_size);
+ release_region(tpm_dev.config_port, tpm_dev.config_size);
+ } else {
+ iounmap(tpm_dev.mem_base);
+ release_mem_region(tpm_dev.map_base, tpm_dev.map_size);
+ }
+
+err_last:
+ return rc;
+}
+
+static void tpm_inf_pnp_remove(struct pnp_dev *dev)
+{
+ struct tpm_chip *chip = pnp_get_drvdata(dev);
+
+ tpm_chip_unregister(chip);
+
+ if (tpm_dev.iotype == TPM_INF_IO_PORT) {
+ release_region(tpm_dev.data_regs, tpm_dev.data_size);
+ release_region(tpm_dev.config_port,
+ tpm_dev.config_size);
+ } else {
+ iounmap(tpm_dev.mem_base);
+ release_mem_region(tpm_dev.map_base, tpm_dev.map_size);
+ }
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tpm_inf_resume(struct device *dev)
+{
+ /* Re-configure TPM after suspending */
+ tpm_config_out(ENABLE_REGISTER_PAIR, TPM_INF_ADDR);
+ tpm_config_out(IOLIMH, TPM_INF_ADDR);
+ tpm_config_out((tpm_dev.data_regs >> 8) & 0xff, TPM_INF_DATA);
+ tpm_config_out(IOLIML, TPM_INF_ADDR);
+ tpm_config_out((tpm_dev.data_regs & 0xff), TPM_INF_DATA);
+ /* activate register */
+ tpm_config_out(TPM_DAR, TPM_INF_ADDR);
+ tpm_config_out(0x01, TPM_INF_DATA);
+ tpm_config_out(DISABLE_REGISTER_PAIR, TPM_INF_ADDR);
+ /* disable RESET, LP and IRQC */
+ tpm_data_out(RESET_LP_IRQC_DISABLE, CMD);
+ return tpm_pm_resume(dev);
+}
+#endif
+static SIMPLE_DEV_PM_OPS(tpm_inf_pm, tpm_pm_suspend, tpm_inf_resume);
+
+static struct pnp_driver tpm_inf_pnp_driver = {
+ .name = "tpm_inf_pnp",
+ .id_table = tpm_inf_pnp_tbl,
+ .probe = tpm_inf_pnp_probe,
+ .remove = tpm_inf_pnp_remove,
+ .driver = {
+ .pm = &tpm_inf_pm,
+ }
+};
+
+module_pnp_driver(tpm_inf_pnp_driver);
+
+MODULE_AUTHOR("Marcel Selhorst <tpmdd@sirrix.com>");
+MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2");
+MODULE_VERSION("1.9.2");
+MODULE_LICENSE("GPL");