summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/ata/pata_at91.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/ata/pata_at91.c')
-rw-r--r--kernel/drivers/ata/pata_at91.c456
1 files changed, 456 insertions, 0 deletions
diff --git a/kernel/drivers/ata/pata_at91.c b/kernel/drivers/ata/pata_at91.c
new file mode 100644
index 000000000..9e85937d3
--- /dev/null
+++ b/kernel/drivers/ata/pata_at91.c
@@ -0,0 +1,456 @@
+/*
+ * PATA driver for AT91SAM9260 Static Memory Controller
+ * with CompactFlash interface in True IDE mode
+ *
+ * Copyright (C) 2009 Matyukevich Sergey
+ * 2011 Igor Plyatov
+ *
+ * Based on:
+ * * generic platform driver by Paul Mundt: drivers/ata/pata_platform.c
+ * * pata_at32 driver by Kristoffer Nyborg Gregertsen
+ * * at91_ide driver by Stanislaw Gruszka
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/blkdev.h>
+#include <linux/gfp.h>
+#include <scsi/scsi_host.h>
+#include <linux/ata.h>
+#include <linux/clk.h>
+#include <linux/libata.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/platform_data/atmel.h>
+
+#include <mach/at91sam9_smc.h>
+#include <asm/gpio.h>
+
+#define DRV_NAME "pata_at91"
+#define DRV_VERSION "0.3"
+
+#define CF_IDE_OFFSET 0x00c00000
+#define CF_ALT_IDE_OFFSET 0x00e00000
+#define CF_IDE_RES_SIZE 0x08
+#define CS_PULSE_MAXIMUM 319
+#define ER_SMC_CALC 1
+#define ER_SMC_RECALC 2
+
+struct at91_ide_info {
+ unsigned long mode;
+ unsigned int cs;
+ struct clk *mck;
+ void __iomem *ide_addr;
+ void __iomem *alt_addr;
+};
+
+/**
+ * struct smc_range - range of valid values for SMC register.
+ */
+struct smc_range {
+ int min;
+ int max;
+};
+
+/**
+ * adjust_smc_value - adjust value for one of SMC registers.
+ * @value: adjusted value
+ * @range: array of SMC ranges with valid values
+ * @size: SMC ranges array size
+ *
+ * This returns the difference between input and output value or negative
+ * in case of invalid input value.
+ * If negative returned, then output value = maximal possible from ranges.
+ */
+static int adjust_smc_value(int *value, struct smc_range *range, int size)
+{
+ int maximum = (range + size - 1)->max;
+ int remainder;
+
+ do {
+ if (*value < range->min) {
+ remainder = range->min - *value;
+ *value = range->min; /* nearest valid value */
+ return remainder;
+ } else if ((range->min <= *value) && (*value <= range->max))
+ return 0;
+
+ range++;
+ } while (--size);
+ *value = maximum;
+
+ return -1; /* invalid value */
+}
+
+/**
+ * calc_smc_vals - calculate SMC register values
+ * @dev: ATA device
+ * @setup: SMC_SETUP register value
+ * @pulse: SMC_PULSE register value
+ * @cycle: SMC_CYCLE register value
+ *
+ * This returns negative in case of invalid values for SMC registers:
+ * -ER_SMC_RECALC - recalculation required for SMC values,
+ * -ER_SMC_CALC - calculation failed (invalid input values).
+ *
+ * SMC use special coding scheme, see "Coding and Range of Timing
+ * Parameters" table from AT91SAM9 datasheets.
+ *
+ * SMC_SETUP = 128*setup[5] + setup[4:0]
+ * SMC_PULSE = 256*pulse[6] + pulse[5:0]
+ * SMC_CYCLE = 256*cycle[8:7] + cycle[6:0]
+ */
+static int calc_smc_vals(struct device *dev,
+ int *setup, int *pulse, int *cycle, int *cs_pulse)
+{
+ int ret_val;
+ int err = 0;
+ struct smc_range range_setup[] = { /* SMC_SETUP valid values */
+ {.min = 0, .max = 31}, /* first range */
+ {.min = 128, .max = 159} /* second range */
+ };
+ struct smc_range range_pulse[] = { /* SMC_PULSE valid values */
+ {.min = 0, .max = 63}, /* first range */
+ {.min = 256, .max = 319} /* second range */
+ };
+ struct smc_range range_cycle[] = { /* SMC_CYCLE valid values */
+ {.min = 0, .max = 127}, /* first range */
+ {.min = 256, .max = 383}, /* second range */
+ {.min = 512, .max = 639}, /* third range */
+ {.min = 768, .max = 895} /* fourth range */
+ };
+
+ ret_val = adjust_smc_value(setup, range_setup, ARRAY_SIZE(range_setup));
+ if (ret_val < 0)
+ dev_warn(dev, "maximal SMC Setup value\n");
+ else
+ *cycle += ret_val;
+
+ ret_val = adjust_smc_value(pulse, range_pulse, ARRAY_SIZE(range_pulse));
+ if (ret_val < 0)
+ dev_warn(dev, "maximal SMC Pulse value\n");
+ else
+ *cycle += ret_val;
+
+ ret_val = adjust_smc_value(cycle, range_cycle, ARRAY_SIZE(range_cycle));
+ if (ret_val < 0)
+ dev_warn(dev, "maximal SMC Cycle value\n");
+
+ *cs_pulse = *cycle;
+ if (*cs_pulse > CS_PULSE_MAXIMUM) {
+ dev_err(dev, "unable to calculate valid SMC settings\n");
+ return -ER_SMC_CALC;
+ }
+
+ ret_val = adjust_smc_value(cs_pulse, range_pulse,
+ ARRAY_SIZE(range_pulse));
+ if (ret_val < 0) {
+ dev_warn(dev, "maximal SMC CS Pulse value\n");
+ } else if (ret_val != 0) {
+ *cycle = *cs_pulse;
+ dev_warn(dev, "SMC Cycle extended\n");
+ err = -ER_SMC_RECALC;
+ }
+
+ return err;
+}
+
+/**
+ * to_smc_format - convert values into SMC format
+ * @setup: SETUP value of SMC Setup Register
+ * @pulse: PULSE value of SMC Pulse Register
+ * @cycle: CYCLE value of SMC Cycle Register
+ * @cs_pulse: NCS_PULSE value of SMC Pulse Register
+ */
+static void to_smc_format(int *setup, int *pulse, int *cycle, int *cs_pulse)
+{
+ *setup = (*setup & 0x1f) | ((*setup & 0x80) >> 2);
+ *pulse = (*pulse & 0x3f) | ((*pulse & 0x100) >> 2);
+ *cycle = (*cycle & 0x7f) | ((*cycle & 0x300) >> 1);
+ *cs_pulse = (*cs_pulse & 0x3f) | ((*cs_pulse & 0x100) >> 2);
+}
+
+static unsigned long calc_mck_cycles(unsigned long ns, unsigned long mck_hz)
+{
+ unsigned long mul;
+
+ /*
+ * cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] =
+ * x * (f / 1_000_000_000) =
+ * x * ((f * 65536) / 1_000_000_000) / 65536 =
+ * x * (((f / 10_000) * 65536) / 100_000) / 65536 =
+ */
+
+ mul = (mck_hz / 10000) << 16;
+ mul /= 100000;
+
+ return (ns * mul + 65536) >> 16; /* rounding */
+}
+
+/**
+ * set_smc_timing - SMC timings setup.
+ * @dev: device
+ * @info: AT91 IDE info
+ * @ata: ATA timings
+ *
+ * Its assumed that write timings are same as read timings,
+ * cs_setup = 0 and cs_pulse = cycle.
+ */
+static void set_smc_timing(struct device *dev, struct ata_device *adev,
+ struct at91_ide_info *info, const struct ata_timing *ata)
+{
+ int ret = 0;
+ int use_iordy;
+ struct sam9_smc_config smc;
+ unsigned int t6z; /* data tristate time in ns */
+ unsigned int cycle; /* SMC Cycle width in MCK ticks */
+ unsigned int setup; /* SMC Setup width in MCK ticks */
+ unsigned int pulse; /* CFIOR and CFIOW pulse width in MCK ticks */
+ unsigned int cs_pulse; /* CS4 or CS5 pulse width in MCK ticks*/
+ unsigned int tdf_cycles; /* SMC TDF MCK ticks */
+ unsigned long mck_hz; /* MCK frequency in Hz */
+
+ t6z = (ata->mode < XFER_PIO_5) ? 30 : 20;
+ mck_hz = clk_get_rate(info->mck);
+ cycle = calc_mck_cycles(ata->cyc8b, mck_hz);
+ setup = calc_mck_cycles(ata->setup, mck_hz);
+ pulse = calc_mck_cycles(ata->act8b, mck_hz);
+ tdf_cycles = calc_mck_cycles(t6z, mck_hz);
+
+ do {
+ ret = calc_smc_vals(dev, &setup, &pulse, &cycle, &cs_pulse);
+ } while (ret == -ER_SMC_RECALC);
+
+ if (ret == -ER_SMC_CALC)
+ dev_err(dev, "Interface may not operate correctly\n");
+
+ dev_dbg(dev, "SMC Setup=%u, Pulse=%u, Cycle=%u, CS Pulse=%u\n",
+ setup, pulse, cycle, cs_pulse);
+ to_smc_format(&setup, &pulse, &cycle, &cs_pulse);
+ /* disable or enable waiting for IORDY signal */
+ use_iordy = ata_pio_need_iordy(adev);
+ if (use_iordy)
+ info->mode |= AT91_SMC_EXNWMODE_READY;
+
+ if (tdf_cycles > 15) {
+ tdf_cycles = 15;
+ dev_warn(dev, "maximal SMC TDF Cycles value\n");
+ }
+
+ dev_dbg(dev, "Use IORDY=%u, TDF Cycles=%u\n", use_iordy, tdf_cycles);
+
+ /* SMC Setup Register */
+ smc.nwe_setup = smc.nrd_setup = setup;
+ smc.ncs_write_setup = smc.ncs_read_setup = 0;
+ /* SMC Pulse Register */
+ smc.nwe_pulse = smc.nrd_pulse = pulse;
+ smc.ncs_write_pulse = smc.ncs_read_pulse = cs_pulse;
+ /* SMC Cycle Register */
+ smc.write_cycle = smc.read_cycle = cycle;
+ /* SMC Mode Register*/
+ smc.tdf_cycles = tdf_cycles;
+ smc.mode = info->mode;
+
+ sam9_smc_configure(0, info->cs, &smc);
+}
+
+static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct at91_ide_info *info = ap->host->private_data;
+ struct ata_timing timing;
+ int ret;
+
+ /* Compute ATA timing and set it to SMC */
+ ret = ata_timing_compute(adev, adev->pio_mode, &timing, 1000, 0);
+ if (ret) {
+ dev_warn(ap->dev, "Failed to compute ATA timing %d, "
+ "set PIO_0 timing\n", ret);
+ timing = *ata_timing_find_mode(XFER_PIO_0);
+ }
+ set_smc_timing(ap->dev, adev, info, &timing);
+}
+
+static unsigned int pata_at91_data_xfer_noirq(struct ata_device *dev,
+ unsigned char *buf, unsigned int buflen, int rw)
+{
+ struct at91_ide_info *info = dev->link->ap->host->private_data;
+ unsigned int consumed;
+ unsigned long flags;
+ struct sam9_smc_config smc;
+
+ local_irq_save(flags);
+ sam9_smc_read_mode(0, info->cs, &smc);
+
+ /* set 16bit mode before writing data */
+ smc.mode = (smc.mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_16;
+ sam9_smc_write_mode(0, info->cs, &smc);
+
+ consumed = ata_sff_data_xfer(dev, buf, buflen, rw);
+
+ /* restore 8bit mode after data is written */
+ smc.mode = (smc.mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_8;
+ sam9_smc_write_mode(0, info->cs, &smc);
+
+ local_irq_restore(flags);
+ return consumed;
+}
+
+static struct scsi_host_template pata_at91_sht = {
+ ATA_PIO_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations pata_at91_port_ops = {
+ .inherits = &ata_sff_port_ops,
+
+ .sff_data_xfer = pata_at91_data_xfer_noirq,
+ .set_piomode = pata_at91_set_piomode,
+ .cable_detect = ata_cable_40wire,
+};
+
+static int pata_at91_probe(struct platform_device *pdev)
+{
+ struct at91_cf_data *board = dev_get_platdata(&pdev->dev);
+ struct device *dev = &pdev->dev;
+ struct at91_ide_info *info;
+ struct resource *mem_res;
+ struct ata_host *host;
+ struct ata_port *ap;
+
+ int irq_flags = 0;
+ int irq = 0;
+ int ret;
+
+ /* get platform resources: IO/CTL memories and irq/rst pins */
+
+ if (pdev->num_resources != 1) {
+ dev_err(&pdev->dev, "invalid number of resources\n");
+ return -EINVAL;
+ }
+
+ mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ if (!mem_res) {
+ dev_err(dev, "failed to get mem resource\n");
+ return -EINVAL;
+ }
+
+ irq = board->irq_pin;
+
+ /* init ata host */
+
+ host = ata_host_alloc(dev, 1);
+
+ if (!host)
+ return -ENOMEM;
+
+ ap = host->ports[0];
+ ap->ops = &pata_at91_port_ops;
+ ap->flags |= ATA_FLAG_SLAVE_POSS;
+ ap->pio_mask = ATA_PIO4;
+
+ if (!gpio_is_valid(irq)) {
+ ap->flags |= ATA_FLAG_PIO_POLLING;
+ ata_port_desc(ap, "no IRQ, using PIO polling");
+ }
+
+ info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+
+ if (!info) {
+ dev_err(dev, "failed to allocate memory for private data\n");
+ return -ENOMEM;
+ }
+
+ info->mck = clk_get(NULL, "mck");
+
+ if (IS_ERR(info->mck)) {
+ dev_err(dev, "failed to get access to mck clock\n");
+ return -ENODEV;
+ }
+
+ info->cs = board->chipselect;
+ info->mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_READY | AT91_SMC_BAT_SELECT |
+ AT91_SMC_DBW_8 | AT91_SMC_TDF_(0);
+
+ info->ide_addr = devm_ioremap(dev,
+ mem_res->start + CF_IDE_OFFSET, CF_IDE_RES_SIZE);
+
+ if (!info->ide_addr) {
+ dev_err(dev, "failed to map IO base\n");
+ ret = -ENOMEM;
+ goto err_put;
+ }
+
+ info->alt_addr = devm_ioremap(dev,
+ mem_res->start + CF_ALT_IDE_OFFSET, CF_IDE_RES_SIZE);
+
+ if (!info->alt_addr) {
+ dev_err(dev, "failed to map CTL base\n");
+ ret = -ENOMEM;
+ goto err_put;
+ }
+
+ ap->ioaddr.cmd_addr = info->ide_addr;
+ ap->ioaddr.ctl_addr = info->alt_addr + 0x06;
+ ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
+
+ ata_sff_std_ports(&ap->ioaddr);
+
+ ata_port_desc(ap, "mmio cmd 0x%llx ctl 0x%llx",
+ (unsigned long long)mem_res->start + CF_IDE_OFFSET,
+ (unsigned long long)mem_res->start + CF_ALT_IDE_OFFSET);
+
+ host->private_data = info;
+
+ ret = ata_host_activate(host, gpio_is_valid(irq) ? gpio_to_irq(irq) : 0,
+ gpio_is_valid(irq) ? ata_sff_interrupt : NULL,
+ irq_flags, &pata_at91_sht);
+ if (ret)
+ goto err_put;
+
+ return 0;
+
+err_put:
+ clk_put(info->mck);
+ return ret;
+}
+
+static int pata_at91_remove(struct platform_device *pdev)
+{
+ struct ata_host *host = platform_get_drvdata(pdev);
+ struct at91_ide_info *info;
+
+ if (!host)
+ return 0;
+ info = host->private_data;
+
+ ata_host_detach(host);
+
+ if (!info)
+ return 0;
+
+ clk_put(info->mck);
+
+ return 0;
+}
+
+static struct platform_driver pata_at91_driver = {
+ .probe = pata_at91_probe,
+ .remove = pata_at91_remove,
+ .driver = {
+ .name = DRV_NAME,
+ },
+};
+
+module_platform_driver(pata_at91_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Driver for CF in True IDE mode on AT91SAM9260 SoC");
+MODULE_AUTHOR("Matyukevich Sergey");
+MODULE_VERSION(DRV_VERSION);
+