summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/acpi/acpica/exprep.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/acpi/acpica/exprep.c')
-rw-r--r--kernel/drivers/acpi/acpica/exprep.c630
1 files changed, 630 insertions, 0 deletions
diff --git a/kernel/drivers/acpi/acpica/exprep.c b/kernel/drivers/acpi/acpica/exprep.c
new file mode 100644
index 000000000..4c2836dc8
--- /dev/null
+++ b/kernel/drivers/acpi/acpica/exprep.c
@@ -0,0 +1,630 @@
+/******************************************************************************
+ *
+ * Module Name: exprep - ACPI AML (p-code) execution - field prep utilities
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2015, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acinterp.h"
+#include "amlcode.h"
+#include "acnamesp.h"
+#include "acdispat.h"
+
+#define _COMPONENT ACPI_EXECUTER
+ACPI_MODULE_NAME("exprep")
+
+/* Local prototypes */
+static u32
+acpi_ex_decode_field_access(union acpi_operand_object *obj_desc,
+ u8 field_flags, u32 * return_byte_alignment);
+
+#ifdef ACPI_UNDER_DEVELOPMENT
+
+static u32
+acpi_ex_generate_access(u32 field_bit_offset,
+ u32 field_bit_length, u32 region_length);
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_generate_access
+ *
+ * PARAMETERS: field_bit_offset - Start of field within parent region/buffer
+ * field_bit_length - Length of field in bits
+ * region_length - Length of parent in bytes
+ *
+ * RETURN: Field granularity (8, 16, 32 or 64) and
+ * byte_alignment (1, 2, 3, or 4)
+ *
+ * DESCRIPTION: Generate an optimal access width for fields defined with the
+ * any_acc keyword.
+ *
+ * NOTE: Need to have the region_length in order to check for boundary
+ * conditions (end-of-region). However, the region_length is a deferred
+ * operation. Therefore, to complete this implementation, the generation
+ * of this access width must be deferred until the region length has
+ * been evaluated.
+ *
+ ******************************************************************************/
+
+static u32
+acpi_ex_generate_access(u32 field_bit_offset,
+ u32 field_bit_length, u32 region_length)
+{
+ u32 field_byte_length;
+ u32 field_byte_offset;
+ u32 field_byte_end_offset;
+ u32 access_byte_width;
+ u32 field_start_offset;
+ u32 field_end_offset;
+ u32 minimum_access_width = 0xFFFFFFFF;
+ u32 minimum_accesses = 0xFFFFFFFF;
+ u32 accesses;
+
+ ACPI_FUNCTION_TRACE(ex_generate_access);
+
+ /* Round Field start offset and length to "minimal" byte boundaries */
+
+ field_byte_offset = ACPI_DIV_8(ACPI_ROUND_DOWN(field_bit_offset, 8));
+ field_byte_end_offset = ACPI_DIV_8(ACPI_ROUND_UP(field_bit_length +
+ field_bit_offset, 8));
+ field_byte_length = field_byte_end_offset - field_byte_offset;
+
+ ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+ "Bit length %u, Bit offset %u\n",
+ field_bit_length, field_bit_offset));
+
+ ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+ "Byte Length %u, Byte Offset %u, End Offset %u\n",
+ field_byte_length, field_byte_offset,
+ field_byte_end_offset));
+
+ /*
+ * Iterative search for the maximum access width that is both aligned
+ * and does not go beyond the end of the region
+ *
+ * Start at byte_acc and work upwards to qword_acc max. (1,2,4,8 bytes)
+ */
+ for (access_byte_width = 1; access_byte_width <= 8;
+ access_byte_width <<= 1) {
+ /*
+ * 1) Round end offset up to next access boundary and make sure that
+ * this does not go beyond the end of the parent region.
+ * 2) When the Access width is greater than the field_byte_length, we
+ * are done. (This does not optimize for the perfectly aligned
+ * case yet).
+ */
+ if (ACPI_ROUND_UP(field_byte_end_offset, access_byte_width) <=
+ region_length) {
+ field_start_offset =
+ ACPI_ROUND_DOWN(field_byte_offset,
+ access_byte_width) /
+ access_byte_width;
+
+ field_end_offset =
+ ACPI_ROUND_UP((field_byte_length +
+ field_byte_offset),
+ access_byte_width) /
+ access_byte_width;
+
+ accesses = field_end_offset - field_start_offset;
+
+ ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+ "AccessWidth %u end is within region\n",
+ access_byte_width));
+
+ ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+ "Field Start %u, Field End %u -- requires %u accesses\n",
+ field_start_offset, field_end_offset,
+ accesses));
+
+ /* Single access is optimal */
+
+ if (accesses <= 1) {
+ ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+ "Entire field can be accessed with one operation of size %u\n",
+ access_byte_width));
+ return_VALUE(access_byte_width);
+ }
+
+ /*
+ * Fits in the region, but requires more than one read/write.
+ * try the next wider access on next iteration
+ */
+ if (accesses < minimum_accesses) {
+ minimum_accesses = accesses;
+ minimum_access_width = access_byte_width;
+ }
+ } else {
+ ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+ "AccessWidth %u end is NOT within region\n",
+ access_byte_width));
+ if (access_byte_width == 1) {
+ ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+ "Field goes beyond end-of-region!\n"));
+
+ /* Field does not fit in the region at all */
+
+ return_VALUE(0);
+ }
+
+ /*
+ * This width goes beyond the end-of-region, back off to
+ * previous access
+ */
+ ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+ "Backing off to previous optimal access width of %u\n",
+ minimum_access_width));
+ return_VALUE(minimum_access_width);
+ }
+ }
+
+ /*
+ * Could not read/write field with one operation,
+ * just use max access width
+ */
+ ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+ "Cannot access field in one operation, using width 8\n"));
+ return_VALUE(8);
+}
+#endif /* ACPI_UNDER_DEVELOPMENT */
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_decode_field_access
+ *
+ * PARAMETERS: obj_desc - Field object
+ * field_flags - Encoded fieldflags (contains access bits)
+ * return_byte_alignment - Where the byte alignment is returned
+ *
+ * RETURN: Field granularity (8, 16, 32 or 64) and
+ * byte_alignment (1, 2, 3, or 4)
+ *
+ * DESCRIPTION: Decode the access_type bits of a field definition.
+ *
+ ******************************************************************************/
+
+static u32
+acpi_ex_decode_field_access(union acpi_operand_object *obj_desc,
+ u8 field_flags, u32 * return_byte_alignment)
+{
+ u32 access;
+ u32 byte_alignment;
+ u32 bit_length;
+
+ ACPI_FUNCTION_TRACE(ex_decode_field_access);
+
+ access = (field_flags & AML_FIELD_ACCESS_TYPE_MASK);
+
+ switch (access) {
+ case AML_FIELD_ACCESS_ANY:
+
+#ifdef ACPI_UNDER_DEVELOPMENT
+ byte_alignment =
+ acpi_ex_generate_access(obj_desc->common_field.
+ start_field_bit_offset,
+ obj_desc->common_field.bit_length,
+ 0xFFFFFFFF
+ /* Temp until we pass region_length as parameter */
+ );
+ bit_length = byte_alignment * 8;
+#endif
+
+ byte_alignment = 1;
+ bit_length = 8;
+ break;
+
+ case AML_FIELD_ACCESS_BYTE:
+ case AML_FIELD_ACCESS_BUFFER: /* ACPI 2.0 (SMBus Buffer) */
+
+ byte_alignment = 1;
+ bit_length = 8;
+ break;
+
+ case AML_FIELD_ACCESS_WORD:
+
+ byte_alignment = 2;
+ bit_length = 16;
+ break;
+
+ case AML_FIELD_ACCESS_DWORD:
+
+ byte_alignment = 4;
+ bit_length = 32;
+ break;
+
+ case AML_FIELD_ACCESS_QWORD: /* ACPI 2.0 */
+
+ byte_alignment = 8;
+ bit_length = 64;
+ break;
+
+ default:
+
+ /* Invalid field access type */
+
+ ACPI_ERROR((AE_INFO, "Unknown field access type 0x%X", access));
+ return_UINT32(0);
+ }
+
+ if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) {
+ /*
+ * buffer_field access can be on any byte boundary, so the
+ * byte_alignment is always 1 byte -- regardless of any byte_alignment
+ * implied by the field access type.
+ */
+ byte_alignment = 1;
+ }
+
+ *return_byte_alignment = byte_alignment;
+ return_UINT32(bit_length);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_prep_common_field_object
+ *
+ * PARAMETERS: obj_desc - The field object
+ * field_flags - Access, lock_rule, and update_rule.
+ * The format of a field_flag is described
+ * in the ACPI specification
+ * field_attribute - Special attributes (not used)
+ * field_bit_position - Field start position
+ * field_bit_length - Field length in number of bits
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Initialize the areas of the field object that are common
+ * to the various types of fields. Note: This is very "sensitive"
+ * code because we are solving the general case for field
+ * alignment.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_prep_common_field_object(union acpi_operand_object *obj_desc,
+ u8 field_flags,
+ u8 field_attribute,
+ u32 field_bit_position, u32 field_bit_length)
+{
+ u32 access_bit_width;
+ u32 byte_alignment;
+ u32 nearest_byte_address;
+
+ ACPI_FUNCTION_TRACE(ex_prep_common_field_object);
+
+ /*
+ * Note: the structure being initialized is the
+ * ACPI_COMMON_FIELD_INFO; No structure fields outside of the common
+ * area are initialized by this procedure.
+ */
+ obj_desc->common_field.field_flags = field_flags;
+ obj_desc->common_field.attribute = field_attribute;
+ obj_desc->common_field.bit_length = field_bit_length;
+
+ /*
+ * Decode the access type so we can compute offsets. The access type gives
+ * two pieces of information - the width of each field access and the
+ * necessary byte_alignment (address granularity) of the access.
+ *
+ * For any_acc, the access_bit_width is the largest width that is both
+ * necessary and possible in an attempt to access the whole field in one
+ * I/O operation. However, for any_acc, the byte_alignment is always one
+ * byte.
+ *
+ * For all Buffer Fields, the byte_alignment is always one byte.
+ *
+ * For all other access types (Byte, Word, Dword, Qword), the Bitwidth is
+ * the same (equivalent) as the byte_alignment.
+ */
+ access_bit_width = acpi_ex_decode_field_access(obj_desc, field_flags,
+ &byte_alignment);
+ if (!access_bit_width) {
+ return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
+ }
+
+ /* Setup width (access granularity) fields (values are: 1, 2, 4, 8) */
+
+ obj_desc->common_field.access_byte_width = (u8)
+ ACPI_DIV_8(access_bit_width);
+
+ /*
+ * base_byte_offset is the address of the start of the field within the
+ * region. It is the byte address of the first *datum* (field-width data
+ * unit) of the field. (i.e., the first datum that contains at least the
+ * first *bit* of the field.)
+ *
+ * Note: byte_alignment is always either equal to the access_bit_width or 8
+ * (Byte access), and it defines the addressing granularity of the parent
+ * region or buffer.
+ */
+ nearest_byte_address =
+ ACPI_ROUND_BITS_DOWN_TO_BYTES(field_bit_position);
+ obj_desc->common_field.base_byte_offset = (u32)
+ ACPI_ROUND_DOWN(nearest_byte_address, byte_alignment);
+
+ /*
+ * start_field_bit_offset is the offset of the first bit of the field within
+ * a field datum.
+ */
+ obj_desc->common_field.start_field_bit_offset = (u8)
+ (field_bit_position -
+ ACPI_MUL_8(obj_desc->common_field.base_byte_offset));
+
+ return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_prep_field_value
+ *
+ * PARAMETERS: info - Contains all field creation info
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Construct an object of type union acpi_operand_object with a
+ * subtype of def_field and connect it to the parent Node.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info)
+{
+ union acpi_operand_object *obj_desc;
+ union acpi_operand_object *second_desc = NULL;
+ acpi_status status;
+ u32 access_byte_width;
+ u32 type;
+
+ ACPI_FUNCTION_TRACE(ex_prep_field_value);
+
+ /* Parameter validation */
+
+ if (info->field_type != ACPI_TYPE_LOCAL_INDEX_FIELD) {
+ if (!info->region_node) {
+ ACPI_ERROR((AE_INFO, "Null RegionNode"));
+ return_ACPI_STATUS(AE_AML_NO_OPERAND);
+ }
+
+ type = acpi_ns_get_type(info->region_node);
+ if (type != ACPI_TYPE_REGION) {
+ ACPI_ERROR((AE_INFO,
+ "Needed Region, found type 0x%X (%s)", type,
+ acpi_ut_get_type_name(type)));
+
+ return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
+ }
+ }
+
+ /* Allocate a new field object */
+
+ obj_desc = acpi_ut_create_internal_object(info->field_type);
+ if (!obj_desc) {
+ return_ACPI_STATUS(AE_NO_MEMORY);
+ }
+
+ /* Initialize areas of the object that are common to all fields */
+
+ obj_desc->common_field.node = info->field_node;
+ status = acpi_ex_prep_common_field_object(obj_desc,
+ info->field_flags,
+ info->attribute,
+ info->field_bit_position,
+ info->field_bit_length);
+ if (ACPI_FAILURE(status)) {
+ acpi_ut_delete_object_desc(obj_desc);
+ return_ACPI_STATUS(status);
+ }
+
+ /* Initialize areas of the object that are specific to the field type */
+
+ switch (info->field_type) {
+ case ACPI_TYPE_LOCAL_REGION_FIELD:
+
+ obj_desc->field.region_obj =
+ acpi_ns_get_attached_object(info->region_node);
+
+ /* Fields specific to generic_serial_bus fields */
+
+ obj_desc->field.access_length = info->access_length;
+
+ if (info->connection_node) {
+ second_desc = info->connection_node->object;
+ if (!(second_desc->common.flags & AOPOBJ_DATA_VALID)) {
+ status =
+ acpi_ds_get_buffer_arguments(second_desc);
+ if (ACPI_FAILURE(status)) {
+ acpi_ut_delete_object_desc(obj_desc);
+ return_ACPI_STATUS(status);
+ }
+ }
+
+ obj_desc->field.resource_buffer =
+ second_desc->buffer.pointer;
+ obj_desc->field.resource_length =
+ (u16)second_desc->buffer.length;
+ } else if (info->resource_buffer) {
+ obj_desc->field.resource_buffer = info->resource_buffer;
+ obj_desc->field.resource_length = info->resource_length;
+ }
+
+ obj_desc->field.pin_number_index = info->pin_number_index;
+
+ /* Allow full data read from EC address space */
+
+ if ((obj_desc->field.region_obj->region.space_id ==
+ ACPI_ADR_SPACE_EC)
+ && (obj_desc->common_field.bit_length > 8)) {
+ access_byte_width =
+ ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->common_field.
+ bit_length);
+
+ /* Maximum byte width supported is 255 */
+
+ if (access_byte_width < 256) {
+ obj_desc->common_field.access_byte_width =
+ (u8)access_byte_width;
+ }
+ }
+ /* An additional reference for the container */
+
+ acpi_ut_add_reference(obj_desc->field.region_obj);
+
+ ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+ "RegionField: BitOff %X, Off %X, Gran %X, Region %p\n",
+ obj_desc->field.start_field_bit_offset,
+ obj_desc->field.base_byte_offset,
+ obj_desc->field.access_byte_width,
+ obj_desc->field.region_obj));
+ break;
+
+ case ACPI_TYPE_LOCAL_BANK_FIELD:
+
+ obj_desc->bank_field.value = info->bank_value;
+ obj_desc->bank_field.region_obj =
+ acpi_ns_get_attached_object(info->region_node);
+ obj_desc->bank_field.bank_obj =
+ acpi_ns_get_attached_object(info->register_node);
+
+ /* An additional reference for the attached objects */
+
+ acpi_ut_add_reference(obj_desc->bank_field.region_obj);
+ acpi_ut_add_reference(obj_desc->bank_field.bank_obj);
+
+ ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+ "Bank Field: BitOff %X, Off %X, Gran %X, Region %p, BankReg %p\n",
+ obj_desc->bank_field.start_field_bit_offset,
+ obj_desc->bank_field.base_byte_offset,
+ obj_desc->field.access_byte_width,
+ obj_desc->bank_field.region_obj,
+ obj_desc->bank_field.bank_obj));
+
+ /*
+ * Remember location in AML stream of the field unit
+ * opcode and operands -- since the bank_value
+ * operands must be evaluated.
+ */
+ second_desc = obj_desc->common.next_object;
+ second_desc->extra.aml_start =
+ ACPI_CAST_PTR(union acpi_parse_object,
+ info->data_register_node)->named.data;
+ second_desc->extra.aml_length =
+ ACPI_CAST_PTR(union acpi_parse_object,
+ info->data_register_node)->named.length;
+
+ break;
+
+ case ACPI_TYPE_LOCAL_INDEX_FIELD:
+
+ /* Get the Index and Data registers */
+
+ obj_desc->index_field.index_obj =
+ acpi_ns_get_attached_object(info->register_node);
+ obj_desc->index_field.data_obj =
+ acpi_ns_get_attached_object(info->data_register_node);
+
+ if (!obj_desc->index_field.data_obj
+ || !obj_desc->index_field.index_obj) {
+ ACPI_ERROR((AE_INFO,
+ "Null Index Object during field prep"));
+ acpi_ut_delete_object_desc(obj_desc);
+ return_ACPI_STATUS(AE_AML_INTERNAL);
+ }
+
+ /* An additional reference for the attached objects */
+
+ acpi_ut_add_reference(obj_desc->index_field.data_obj);
+ acpi_ut_add_reference(obj_desc->index_field.index_obj);
+
+ /*
+ * April 2006: Changed to match MS behavior
+ *
+ * The value written to the Index register is the byte offset of the
+ * target field in units of the granularity of the index_field
+ *
+ * Previously, the value was calculated as an index in terms of the
+ * width of the Data register, as below:
+ *
+ * obj_desc->index_field.Value = (u32)
+ * (Info->field_bit_position / ACPI_MUL_8 (
+ * obj_desc->Field.access_byte_width));
+ *
+ * February 2006: Tried value as a byte offset:
+ * obj_desc->index_field.Value = (u32)
+ * ACPI_DIV_8 (Info->field_bit_position);
+ */
+ obj_desc->index_field.value =
+ (u32) ACPI_ROUND_DOWN(ACPI_DIV_8(info->field_bit_position),
+ obj_desc->index_field.
+ access_byte_width);
+
+ ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+ "IndexField: BitOff %X, Off %X, Value %X, Gran %X, Index %p, Data %p\n",
+ obj_desc->index_field.start_field_bit_offset,
+ obj_desc->index_field.base_byte_offset,
+ obj_desc->index_field.value,
+ obj_desc->field.access_byte_width,
+ obj_desc->index_field.index_obj,
+ obj_desc->index_field.data_obj));
+ break;
+
+ default:
+
+ /* No other types should get here */
+
+ break;
+ }
+
+ /*
+ * Store the constructed descriptor (obj_desc) into the parent Node,
+ * preserving the current type of that named_obj.
+ */
+ status = acpi_ns_attach_object(info->field_node, obj_desc,
+ acpi_ns_get_type(info->field_node));
+
+ ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+ "Set NamedObj %p [%4.4s], ObjDesc %p\n",
+ info->field_node,
+ acpi_ut_get_node_name(info->field_node), obj_desc));
+
+ /* Remove local reference to the object */
+
+ acpi_ut_remove_reference(obj_desc);
+ return_ACPI_STATUS(status);
+}