diff options
Diffstat (limited to 'kernel/arch/x86/ia32')
| -rw-r--r-- | kernel/arch/x86/ia32/Makefile | 2 | ||||
| -rw-r--r-- | kernel/arch/x86/ia32/ia32_signal.c | 118 | ||||
| -rw-r--r-- | kernel/arch/x86/ia32/ia32entry.S | 611 |
3 files changed, 14 insertions, 717 deletions
diff --git a/kernel/arch/x86/ia32/Makefile b/kernel/arch/x86/ia32/Makefile index bb635c641..cd4339bae 100644 --- a/kernel/arch/x86/ia32/Makefile +++ b/kernel/arch/x86/ia32/Makefile @@ -2,7 +2,7 @@ # Makefile for the ia32 kernel emulation subsystem. # -obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_signal.o +obj-$(CONFIG_IA32_EMULATION) := sys_ia32.o ia32_signal.o obj-$(CONFIG_IA32_AOUT) += ia32_aout.o diff --git a/kernel/arch/x86/ia32/ia32_signal.c b/kernel/arch/x86/ia32/ia32_signal.c index c81d35e6c..0552884da 100644 --- a/kernel/arch/x86/ia32/ia32_signal.c +++ b/kernel/arch/x86/ia32/ia32_signal.c @@ -21,12 +21,12 @@ #include <linux/binfmts.h> #include <asm/ucontext.h> #include <asm/uaccess.h> -#include <asm/i387.h> -#include <asm/fpu-internal.h> +#include <asm/fpu/internal.h> +#include <asm/fpu/signal.h> #include <asm/ptrace.h> #include <asm/ia32_unistd.h> #include <asm/user32.h> -#include <asm/sigcontext32.h> +#include <uapi/asm/sigcontext.h> #include <asm/proto.h> #include <asm/vdso.h> #include <asm/sigframe.h> @@ -34,99 +34,6 @@ #include <asm/sys_ia32.h> #include <asm/smap.h> -int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from) -{ - int err = 0; - bool ia32 = test_thread_flag(TIF_IA32); - - if (!access_ok(VERIFY_WRITE, to, sizeof(compat_siginfo_t))) - return -EFAULT; - - put_user_try { - /* If you change siginfo_t structure, please make sure that - this code is fixed accordingly. - It should never copy any pad contained in the structure - to avoid security leaks, but must copy the generic - 3 ints plus the relevant union member. */ - put_user_ex(from->si_signo, &to->si_signo); - put_user_ex(from->si_errno, &to->si_errno); - put_user_ex((short)from->si_code, &to->si_code); - - if (from->si_code < 0) { - put_user_ex(from->si_pid, &to->si_pid); - put_user_ex(from->si_uid, &to->si_uid); - put_user_ex(ptr_to_compat(from->si_ptr), &to->si_ptr); - } else { - /* - * First 32bits of unions are always present: - * si_pid === si_band === si_tid === si_addr(LS half) - */ - put_user_ex(from->_sifields._pad[0], - &to->_sifields._pad[0]); - switch (from->si_code >> 16) { - case __SI_FAULT >> 16: - break; - case __SI_SYS >> 16: - put_user_ex(from->si_syscall, &to->si_syscall); - put_user_ex(from->si_arch, &to->si_arch); - break; - case __SI_CHLD >> 16: - if (ia32) { - put_user_ex(from->si_utime, &to->si_utime); - put_user_ex(from->si_stime, &to->si_stime); - } else { - put_user_ex(from->si_utime, &to->_sifields._sigchld_x32._utime); - put_user_ex(from->si_stime, &to->_sifields._sigchld_x32._stime); - } - put_user_ex(from->si_status, &to->si_status); - /* FALL THROUGH */ - default: - case __SI_KILL >> 16: - put_user_ex(from->si_uid, &to->si_uid); - break; - case __SI_POLL >> 16: - put_user_ex(from->si_fd, &to->si_fd); - break; - case __SI_TIMER >> 16: - put_user_ex(from->si_overrun, &to->si_overrun); - put_user_ex(ptr_to_compat(from->si_ptr), - &to->si_ptr); - break; - /* This is not generated by the kernel as of now. */ - case __SI_RT >> 16: - case __SI_MESGQ >> 16: - put_user_ex(from->si_uid, &to->si_uid); - put_user_ex(from->si_int, &to->si_int); - break; - } - } - } put_user_catch(err); - - return err; -} - -int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from) -{ - int err = 0; - u32 ptr32; - - if (!access_ok(VERIFY_READ, from, sizeof(compat_siginfo_t))) - return -EFAULT; - - get_user_try { - get_user_ex(to->si_signo, &from->si_signo); - get_user_ex(to->si_errno, &from->si_errno); - get_user_ex(to->si_code, &from->si_code); - - get_user_ex(to->si_pid, &from->si_pid); - get_user_ex(to->si_uid, &from->si_uid); - get_user_ex(ptr32, &from->si_ptr); - to->si_ptr = compat_ptr(ptr32); - } get_user_catch(err); - - return err; -} - /* * Do a signal return; undo the signal stack. */ @@ -161,7 +68,7 @@ int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from) } static int ia32_restore_sigcontext(struct pt_regs *regs, - struct sigcontext_ia32 __user *sc) + struct sigcontext_32 __user *sc) { unsigned int tmpflags, err = 0; void __user *buf; @@ -198,7 +105,7 @@ static int ia32_restore_sigcontext(struct pt_regs *regs, buf = compat_ptr(tmp); } get_user_catch(err); - err |= restore_xstate_sig(buf, 1); + err |= fpu__restore_sig(buf, 1); force_iret(); @@ -263,7 +170,7 @@ badframe: * Set up a signal frame. */ -static int ia32_setup_sigcontext(struct sigcontext_ia32 __user *sc, +static int ia32_setup_sigcontext(struct sigcontext_32 __user *sc, void __user *fpstate, struct pt_regs *regs, unsigned int mask) { @@ -308,6 +215,7 @@ static void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs, size_t frame_size, void __user **fpstate) { + struct fpu *fpu = ¤t->thread.fpu; unsigned long sp; /* Default to using normal stack */ @@ -322,12 +230,12 @@ static void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs, ksig->ka.sa.sa_restorer) sp = (unsigned long) ksig->ka.sa.sa_restorer; - if (used_math()) { + if (fpu->fpstate_active) { unsigned long fx_aligned, math_size; - sp = alloc_mathframe(sp, 1, &fx_aligned, &math_size); - *fpstate = (struct _fpstate_ia32 __user *) sp; - if (save_xstate_sig(*fpstate, (void __user *)fx_aligned, + sp = fpu__alloc_mathframe(sp, 1, &fx_aligned, &math_size); + *fpstate = (struct _fpstate_32 __user *) sp; + if (copy_fpstate_to_sigframe(*fpstate, (void __user *)fx_aligned, math_size) < 0) return (void __user *) -1L; } @@ -381,7 +289,7 @@ int ia32_setup_frame(int sig, struct ksignal *ksig, /* Return stub is in 32bit vsyscall page */ if (current->mm->context.vdso) restorer = current->mm->context.vdso + - selected_vdso32->sym___kernel_sigreturn; + vdso_image_32.sym___kernel_sigreturn; else restorer = &frame->retcode; } @@ -460,7 +368,7 @@ int ia32_setup_rt_frame(int sig, struct ksignal *ksig, restorer = ksig->ka.sa.sa_restorer; else restorer = current->mm->context.vdso + - selected_vdso32->sym___kernel_rt_sigreturn; + vdso_image_32.sym___kernel_rt_sigreturn; put_user_ex(ptr_to_compat(restorer), &frame->pretcode); /* diff --git a/kernel/arch/x86/ia32/ia32entry.S b/kernel/arch/x86/ia32/ia32entry.S deleted file mode 100644 index 72bf2680f..000000000 --- a/kernel/arch/x86/ia32/ia32entry.S +++ /dev/null @@ -1,611 +0,0 @@ -/* - * Compatibility mode system call entry point for x86-64. - * - * Copyright 2000-2002 Andi Kleen, SuSE Labs. - */ - -#include <asm/dwarf2.h> -#include <asm/calling.h> -#include <asm/asm-offsets.h> -#include <asm/current.h> -#include <asm/errno.h> -#include <asm/ia32_unistd.h> -#include <asm/thread_info.h> -#include <asm/segment.h> -#include <asm/irqflags.h> -#include <asm/asm.h> -#include <asm/smap.h> -#include <linux/linkage.h> -#include <linux/err.h> - -/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */ -#include <linux/elf-em.h> -#define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE) -#define __AUDIT_ARCH_LE 0x40000000 - -#ifndef CONFIG_AUDITSYSCALL -#define sysexit_audit ia32_ret_from_sys_call -#define sysretl_audit ia32_ret_from_sys_call -#endif - - .section .entry.text, "ax" - - /* clobbers %rax */ - .macro CLEAR_RREGS _r9=rax - xorl %eax,%eax - movq %rax,R11(%rsp) - movq %rax,R10(%rsp) - movq %\_r9,R9(%rsp) - movq %rax,R8(%rsp) - .endm - - /* - * Reload arg registers from stack in case ptrace changed them. - * We don't reload %eax because syscall_trace_enter() returned - * the %rax value we should see. Instead, we just truncate that - * value to 32 bits again as we did on entry from user mode. - * If it's a new value set by user_regset during entry tracing, - * this matches the normal truncation of the user-mode value. - * If it's -1 to make us punt the syscall, then (u32)-1 is still - * an appropriately invalid value. - */ - .macro LOAD_ARGS32 _r9=0 - .if \_r9 - movl R9(%rsp),%r9d - .endif - movl RCX(%rsp),%ecx - movl RDX(%rsp),%edx - movl RSI(%rsp),%esi - movl RDI(%rsp),%edi - movl %eax,%eax /* zero extension */ - .endm - - .macro CFI_STARTPROC32 simple - CFI_STARTPROC \simple - CFI_UNDEFINED r8 - CFI_UNDEFINED r9 - CFI_UNDEFINED r10 - CFI_UNDEFINED r11 - CFI_UNDEFINED r12 - CFI_UNDEFINED r13 - CFI_UNDEFINED r14 - CFI_UNDEFINED r15 - .endm - -#ifdef CONFIG_PARAVIRT -ENTRY(native_usergs_sysret32) - swapgs - sysretl -ENDPROC(native_usergs_sysret32) - -ENTRY(native_irq_enable_sysexit) - swapgs - sti - sysexit -ENDPROC(native_irq_enable_sysexit) -#endif - -/* - * 32bit SYSENTER instruction entry. - * - * SYSENTER loads ss, rsp, cs, and rip from previously programmed MSRs. - * IF and VM in rflags are cleared (IOW: interrupts are off). - * SYSENTER does not save anything on the stack, - * and does not save old rip (!!!) and rflags. - * - * Arguments: - * eax system call number - * ebx arg1 - * ecx arg2 - * edx arg3 - * esi arg4 - * edi arg5 - * ebp user stack - * 0(%ebp) arg6 - * - * This is purely a fast path. For anything complicated we use the int 0x80 - * path below. We set up a complete hardware stack frame to share code - * with the int 0x80 path. - */ -ENTRY(ia32_sysenter_target) - CFI_STARTPROC32 simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA rsp,0 - CFI_REGISTER rsp,rbp - - /* - * Interrupts are off on entry. - * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON, - * it is too small to ever cause noticeable irq latency. - */ - SWAPGS_UNSAFE_STACK - movq PER_CPU_VAR(cpu_tss + TSS_sp0), %rsp - ENABLE_INTERRUPTS(CLBR_NONE) - - /* Zero-extending 32-bit regs, do not remove */ - movl %ebp, %ebp - movl %eax, %eax - - movl ASM_THREAD_INFO(TI_sysenter_return, %rsp, 0), %r10d - CFI_REGISTER rip,r10 - - /* Construct struct pt_regs on stack */ - pushq_cfi $__USER32_DS /* pt_regs->ss */ - pushq_cfi %rbp /* pt_regs->sp */ - CFI_REL_OFFSET rsp,0 - pushfq_cfi /* pt_regs->flags */ - pushq_cfi $__USER32_CS /* pt_regs->cs */ - pushq_cfi %r10 /* pt_regs->ip = thread_info->sysenter_return */ - CFI_REL_OFFSET rip,0 - pushq_cfi_reg rax /* pt_regs->orig_ax */ - pushq_cfi_reg rdi /* pt_regs->di */ - pushq_cfi_reg rsi /* pt_regs->si */ - pushq_cfi_reg rdx /* pt_regs->dx */ - pushq_cfi_reg rcx /* pt_regs->cx */ - pushq_cfi_reg rax /* pt_regs->ax */ - cld - sub $(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */ - CFI_ADJUST_CFA_OFFSET 10*8 - - /* - * no need to do an access_ok check here because rbp has been - * 32bit zero extended - */ - ASM_STAC -1: movl (%rbp),%ebp - _ASM_EXTABLE(1b,ia32_badarg) - ASM_CLAC - - /* - * Sysenter doesn't filter flags, so we need to clear NT - * ourselves. To save a few cycles, we can check whether - * NT was set instead of doing an unconditional popfq. - */ - testl $X86_EFLAGS_NT,EFLAGS(%rsp) - jnz sysenter_fix_flags -sysenter_flags_fixed: - - orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS) - testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS) - CFI_REMEMBER_STATE - jnz sysenter_tracesys - cmpq $(IA32_NR_syscalls-1),%rax - ja ia32_badsys -sysenter_do_call: - /* 32bit syscall -> 64bit C ABI argument conversion */ - movl %edi,%r8d /* arg5 */ - movl %ebp,%r9d /* arg6 */ - xchg %ecx,%esi /* rsi:arg2, rcx:arg4 */ - movl %ebx,%edi /* arg1 */ - movl %edx,%edx /* arg3 (zero extension) */ -sysenter_dispatch: - call *ia32_sys_call_table(,%rax,8) - movq %rax,RAX(%rsp) - DISABLE_INTERRUPTS(CLBR_NONE) - TRACE_IRQS_OFF - testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS) - jnz sysexit_audit -sysexit_from_sys_call: - /* - * NB: SYSEXIT is not obviously safe for 64-bit kernels -- an - * NMI between STI and SYSEXIT has poorly specified behavior, - * and and NMI followed by an IRQ with usergs is fatal. So - * we just pretend we're using SYSEXIT but we really use - * SYSRETL instead. - * - * This code path is still called 'sysexit' because it pairs - * with 'sysenter' and it uses the SYSENTER calling convention. - */ - andl $~TS_COMPAT,ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS) - movl RIP(%rsp),%ecx /* User %eip */ - CFI_REGISTER rip,rcx - RESTORE_RSI_RDI - xorl %edx,%edx /* avoid info leaks */ - xorq %r8,%r8 - xorq %r9,%r9 - xorq %r10,%r10 - movl EFLAGS(%rsp),%r11d /* User eflags */ - /*CFI_RESTORE rflags*/ - TRACE_IRQS_ON - - /* - * SYSRETL works even on Intel CPUs. Use it in preference to SYSEXIT, - * since it avoids a dicey window with interrupts enabled. - */ - movl RSP(%rsp),%esp - - /* - * USERGS_SYSRET32 does: - * gsbase = user's gs base - * eip = ecx - * rflags = r11 - * cs = __USER32_CS - * ss = __USER_DS - * - * The prologue set RIP(%rsp) to VDSO32_SYSENTER_RETURN, which does: - * - * pop %ebp - * pop %edx - * pop %ecx - * - * Therefore, we invoke SYSRETL with EDX and R8-R10 zeroed to - * avoid info leaks. R11 ends up with VDSO32_SYSENTER_RETURN's - * address (already known to user code), and R12-R15 are - * callee-saved and therefore don't contain any interesting - * kernel data. - */ - USERGS_SYSRET32 - - CFI_RESTORE_STATE - -#ifdef CONFIG_AUDITSYSCALL - .macro auditsys_entry_common - movl %esi,%r8d /* 5th arg: 4th syscall arg */ - movl %ecx,%r9d /*swap with edx*/ - movl %edx,%ecx /* 4th arg: 3rd syscall arg */ - movl %r9d,%edx /* 3rd arg: 2nd syscall arg */ - movl %ebx,%esi /* 2nd arg: 1st syscall arg */ - movl %eax,%edi /* 1st arg: syscall number */ - call __audit_syscall_entry - movl RAX(%rsp),%eax /* reload syscall number */ - cmpq $(IA32_NR_syscalls-1),%rax - ja ia32_badsys - movl %ebx,%edi /* reload 1st syscall arg */ - movl RCX(%rsp),%esi /* reload 2nd syscall arg */ - movl RDX(%rsp),%edx /* reload 3rd syscall arg */ - movl RSI(%rsp),%ecx /* reload 4th syscall arg */ - movl RDI(%rsp),%r8d /* reload 5th syscall arg */ - .endm - - .macro auditsys_exit exit - testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS) - jnz ia32_ret_from_sys_call - TRACE_IRQS_ON - ENABLE_INTERRUPTS(CLBR_NONE) - movl %eax,%esi /* second arg, syscall return value */ - cmpl $-MAX_ERRNO,%eax /* is it an error ? */ - jbe 1f - movslq %eax, %rsi /* if error sign extend to 64 bits */ -1: setbe %al /* 1 if error, 0 if not */ - movzbl %al,%edi /* zero-extend that into %edi */ - call __audit_syscall_exit - movq RAX(%rsp),%rax /* reload syscall return value */ - movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi - DISABLE_INTERRUPTS(CLBR_NONE) - TRACE_IRQS_OFF - testl %edi, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS) - jz \exit - CLEAR_RREGS - jmp int_with_check - .endm - -sysenter_auditsys: - auditsys_entry_common - movl %ebp,%r9d /* reload 6th syscall arg */ - jmp sysenter_dispatch - -sysexit_audit: - auditsys_exit sysexit_from_sys_call -#endif - -sysenter_fix_flags: - pushq_cfi $(X86_EFLAGS_IF|X86_EFLAGS_FIXED) - popfq_cfi - jmp sysenter_flags_fixed - -sysenter_tracesys: -#ifdef CONFIG_AUDITSYSCALL - testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS) - jz sysenter_auditsys -#endif - SAVE_EXTRA_REGS - CLEAR_RREGS - movq $-ENOSYS,RAX(%rsp)/* ptrace can change this for a bad syscall */ - movq %rsp,%rdi /* &pt_regs -> arg1 */ - call syscall_trace_enter - LOAD_ARGS32 /* reload args from stack in case ptrace changed it */ - RESTORE_EXTRA_REGS - cmpq $(IA32_NR_syscalls-1),%rax - ja int_ret_from_sys_call /* sysenter_tracesys has set RAX(%rsp) */ - jmp sysenter_do_call - CFI_ENDPROC -ENDPROC(ia32_sysenter_target) - -/* - * 32bit SYSCALL instruction entry. - * - * 32bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11, - * then loads new ss, cs, and rip from previously programmed MSRs. - * rflags gets masked by a value from another MSR (so CLD and CLAC - * are not needed). SYSCALL does not save anything on the stack - * and does not change rsp. - * - * Note: rflags saving+masking-with-MSR happens only in Long mode - * (in legacy 32bit mode, IF, RF and VM bits are cleared and that's it). - * Don't get confused: rflags saving+masking depends on Long Mode Active bit - * (EFER.LMA=1), NOT on bitness of userspace where SYSCALL executes - * or target CS descriptor's L bit (SYSCALL does not read segment descriptors). - * - * Arguments: - * eax system call number - * ecx return address - * ebx arg1 - * ebp arg2 (note: not saved in the stack frame, should not be touched) - * edx arg3 - * esi arg4 - * edi arg5 - * esp user stack - * 0(%esp) arg6 - * - * This is purely a fast path. For anything complicated we use the int 0x80 - * path below. We set up a complete hardware stack frame to share code - * with the int 0x80 path. - */ -ENTRY(ia32_cstar_target) - CFI_STARTPROC32 simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA rsp,0 - CFI_REGISTER rip,rcx - /*CFI_REGISTER rflags,r11*/ - - /* - * Interrupts are off on entry. - * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON, - * it is too small to ever cause noticeable irq latency. - */ - SWAPGS_UNSAFE_STACK - movl %esp,%r8d - CFI_REGISTER rsp,r8 - movq PER_CPU_VAR(kernel_stack),%rsp - ENABLE_INTERRUPTS(CLBR_NONE) - - /* Zero-extending 32-bit regs, do not remove */ - movl %eax,%eax - - /* Construct struct pt_regs on stack */ - pushq_cfi $__USER32_DS /* pt_regs->ss */ - pushq_cfi %r8 /* pt_regs->sp */ - CFI_REL_OFFSET rsp,0 - pushq_cfi %r11 /* pt_regs->flags */ - pushq_cfi $__USER32_CS /* pt_regs->cs */ - pushq_cfi %rcx /* pt_regs->ip */ - CFI_REL_OFFSET rip,0 - pushq_cfi_reg rax /* pt_regs->orig_ax */ - pushq_cfi_reg rdi /* pt_regs->di */ - pushq_cfi_reg rsi /* pt_regs->si */ - pushq_cfi_reg rdx /* pt_regs->dx */ - pushq_cfi_reg rbp /* pt_regs->cx */ - movl %ebp,%ecx - pushq_cfi_reg rax /* pt_regs->ax */ - sub $(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */ - CFI_ADJUST_CFA_OFFSET 10*8 - - /* - * no need to do an access_ok check here because r8 has been - * 32bit zero extended - */ - ASM_STAC -1: movl (%r8),%r9d - _ASM_EXTABLE(1b,ia32_badarg) - ASM_CLAC - orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS) - testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS) - CFI_REMEMBER_STATE - jnz cstar_tracesys - cmpq $IA32_NR_syscalls-1,%rax - ja ia32_badsys -cstar_do_call: - /* 32bit syscall -> 64bit C ABI argument conversion */ - movl %edi,%r8d /* arg5 */ - /* r9 already loaded */ /* arg6 */ - xchg %ecx,%esi /* rsi:arg2, rcx:arg4 */ - movl %ebx,%edi /* arg1 */ - movl %edx,%edx /* arg3 (zero extension) */ -cstar_dispatch: - call *ia32_sys_call_table(,%rax,8) - movq %rax,RAX(%rsp) - DISABLE_INTERRUPTS(CLBR_NONE) - TRACE_IRQS_OFF - testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS) - jnz sysretl_audit -sysretl_from_sys_call: - andl $~TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS) - RESTORE_RSI_RDI_RDX - movl RIP(%rsp),%ecx - CFI_REGISTER rip,rcx - movl EFLAGS(%rsp),%r11d - /*CFI_REGISTER rflags,r11*/ - xorq %r10,%r10 - xorq %r9,%r9 - xorq %r8,%r8 - TRACE_IRQS_ON - movl RSP(%rsp),%esp - CFI_RESTORE rsp - /* - * 64bit->32bit SYSRET restores eip from ecx, - * eflags from r11 (but RF and VM bits are forced to 0), - * cs and ss are loaded from MSRs. - * (Note: 32bit->32bit SYSRET is different: since r11 - * does not exist, it merely sets eflags.IF=1). - * - * NB: On AMD CPUs with the X86_BUG_SYSRET_SS_ATTRS bug, the ss - * descriptor is not reinitialized. This means that we must - * avoid SYSRET with SS == NULL, which could happen if we schedule, - * exit the kernel, and re-enter using an interrupt vector. (All - * interrupt entries on x86_64 set SS to NULL.) We prevent that - * from happening by reloading SS in __switch_to. - */ - USERGS_SYSRET32 - -#ifdef CONFIG_AUDITSYSCALL -cstar_auditsys: - CFI_RESTORE_STATE - movl %r9d,R9(%rsp) /* register to be clobbered by call */ - auditsys_entry_common - movl R9(%rsp),%r9d /* reload 6th syscall arg */ - jmp cstar_dispatch - -sysretl_audit: - auditsys_exit sysretl_from_sys_call -#endif - -cstar_tracesys: -#ifdef CONFIG_AUDITSYSCALL - testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS) - jz cstar_auditsys -#endif - xchgl %r9d,%ebp - SAVE_EXTRA_REGS - CLEAR_RREGS r9 - movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */ - movq %rsp,%rdi /* &pt_regs -> arg1 */ - call syscall_trace_enter - LOAD_ARGS32 1 /* reload args from stack in case ptrace changed it */ - RESTORE_EXTRA_REGS - xchgl %ebp,%r9d - cmpq $(IA32_NR_syscalls-1),%rax - ja int_ret_from_sys_call /* cstar_tracesys has set RAX(%rsp) */ - jmp cstar_do_call -END(ia32_cstar_target) - -ia32_badarg: - ASM_CLAC - movq $-EFAULT,%rax - jmp ia32_sysret - CFI_ENDPROC - -/* - * Emulated IA32 system calls via int 0x80. - * - * Arguments: - * eax system call number - * ebx arg1 - * ecx arg2 - * edx arg3 - * esi arg4 - * edi arg5 - * ebp arg6 (note: not saved in the stack frame, should not be touched) - * - * Notes: - * Uses the same stack frame as the x86-64 version. - * All registers except eax must be saved (but ptrace may violate that). - * Arguments are zero extended. For system calls that want sign extension and - * take long arguments a wrapper is needed. Most calls can just be called - * directly. - * Assumes it is only called from user space and entered with interrupts off. - */ - -ENTRY(ia32_syscall) - CFI_STARTPROC32 simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA rsp,5*8 - /*CFI_REL_OFFSET ss,4*8 */ - CFI_REL_OFFSET rsp,3*8 - /*CFI_REL_OFFSET rflags,2*8 */ - /*CFI_REL_OFFSET cs,1*8 */ - CFI_REL_OFFSET rip,0*8 - - /* - * Interrupts are off on entry. - * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON, - * it is too small to ever cause noticeable irq latency. - */ - PARAVIRT_ADJUST_EXCEPTION_FRAME - SWAPGS - ENABLE_INTERRUPTS(CLBR_NONE) - - /* Zero-extending 32-bit regs, do not remove */ - movl %eax,%eax - - /* Construct struct pt_regs on stack (iret frame is already on stack) */ - pushq_cfi_reg rax /* pt_regs->orig_ax */ - pushq_cfi_reg rdi /* pt_regs->di */ - pushq_cfi_reg rsi /* pt_regs->si */ - pushq_cfi_reg rdx /* pt_regs->dx */ - pushq_cfi_reg rcx /* pt_regs->cx */ - pushq_cfi_reg rax /* pt_regs->ax */ - cld - sub $(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */ - CFI_ADJUST_CFA_OFFSET 10*8 - - orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS) - testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS) - jnz ia32_tracesys - cmpq $(IA32_NR_syscalls-1),%rax - ja ia32_badsys -ia32_do_call: - /* 32bit syscall -> 64bit C ABI argument conversion */ - movl %edi,%r8d /* arg5 */ - movl %ebp,%r9d /* arg6 */ - xchg %ecx,%esi /* rsi:arg2, rcx:arg4 */ - movl %ebx,%edi /* arg1 */ - movl %edx,%edx /* arg3 (zero extension) */ - call *ia32_sys_call_table(,%rax,8) # xxx: rip relative -ia32_sysret: - movq %rax,RAX(%rsp) -ia32_ret_from_sys_call: - CLEAR_RREGS - jmp int_ret_from_sys_call - -ia32_tracesys: - SAVE_EXTRA_REGS - CLEAR_RREGS - movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */ - movq %rsp,%rdi /* &pt_regs -> arg1 */ - call syscall_trace_enter - LOAD_ARGS32 /* reload args from stack in case ptrace changed it */ - RESTORE_EXTRA_REGS - cmpq $(IA32_NR_syscalls-1),%rax - ja int_ret_from_sys_call /* ia32_tracesys has set RAX(%rsp) */ - jmp ia32_do_call -END(ia32_syscall) - -ia32_badsys: - movq $0,ORIG_RAX(%rsp) - movq $-ENOSYS,%rax - jmp ia32_sysret - - CFI_ENDPROC - - .macro PTREGSCALL label, func - ALIGN -GLOBAL(\label) - leaq \func(%rip),%rax - jmp ia32_ptregs_common - .endm - - CFI_STARTPROC32 - - PTREGSCALL stub32_rt_sigreturn, sys32_rt_sigreturn - PTREGSCALL stub32_sigreturn, sys32_sigreturn - PTREGSCALL stub32_fork, sys_fork - PTREGSCALL stub32_vfork, sys_vfork - - ALIGN -GLOBAL(stub32_clone) - leaq sys_clone(%rip),%rax - mov %r8, %rcx - jmp ia32_ptregs_common - - ALIGN -ia32_ptregs_common: - CFI_ENDPROC - CFI_STARTPROC32 simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA rsp,SIZEOF_PTREGS - CFI_REL_OFFSET rax,RAX - CFI_REL_OFFSET rcx,RCX - CFI_REL_OFFSET rdx,RDX - CFI_REL_OFFSET rsi,RSI - CFI_REL_OFFSET rdi,RDI - CFI_REL_OFFSET rip,RIP -/* CFI_REL_OFFSET cs,CS*/ -/* CFI_REL_OFFSET rflags,EFLAGS*/ - CFI_REL_OFFSET rsp,RSP -/* CFI_REL_OFFSET ss,SS*/ - SAVE_EXTRA_REGS 8 - call *%rax - RESTORE_EXTRA_REGS 8 - ret - CFI_ENDPROC -END(ia32_ptregs_common) |