summaryrefslogtreecommitdiffstats
path: root/kernel/arch/m68k/Kconfig.cpu
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/m68k/Kconfig.cpu')
-rw-r--r--kernel/arch/m68k/Kconfig.cpu490
1 files changed, 490 insertions, 0 deletions
diff --git a/kernel/arch/m68k/Kconfig.cpu b/kernel/arch/m68k/Kconfig.cpu
new file mode 100644
index 000000000..33013dfcd
--- /dev/null
+++ b/kernel/arch/m68k/Kconfig.cpu
@@ -0,0 +1,490 @@
+comment "Processor Type"
+
+choice
+ prompt "CPU family support"
+ default M68KCLASSIC if MMU
+ default COLDFIRE if !MMU
+ help
+ The Freescale (was Motorola) M68K family of processors implements
+ the full 68000 processor instruction set.
+ The Freescale ColdFire family of processors is a modern derivative
+ of the 68000 processor family. They are mainly targeted at embedded
+ applications, and are all System-On-Chip (SOC) devices, as opposed
+ to stand alone CPUs. They implement a subset of the original 68000
+ processor instruction set.
+ If you anticipate running this kernel on a computer with a classic
+ MC68xxx processor, select M68KCLASSIC.
+ If you anticipate running this kernel on a computer with a ColdFire
+ processor, select COLDFIRE.
+
+config M68KCLASSIC
+ bool "Classic M68K CPU family support"
+
+config COLDFIRE
+ bool "Coldfire CPU family support"
+ select ARCH_REQUIRE_GPIOLIB
+ select ARCH_HAVE_CUSTOM_GPIO_H
+ select CPU_HAS_NO_BITFIELDS
+ select CPU_HAS_NO_MULDIV64
+ select GENERIC_CSUM
+ select HAVE_CLK
+
+endchoice
+
+if M68KCLASSIC
+
+config M68000
+ bool "MC68000"
+ depends on !MMU
+ select CPU_HAS_NO_BITFIELDS
+ select CPU_HAS_NO_MULDIV64
+ select CPU_HAS_NO_UNALIGNED
+ select GENERIC_CSUM
+ help
+ The Freescale (was Motorola) 68000 CPU is the first generation of
+ the well known M68K family of processors. The CPU core as well as
+ being available as a stand alone CPU was also used in many
+ System-On-Chip devices (eg 68328, 68302, etc). It does not contain
+ a paging MMU.
+
+config MCPU32
+ bool
+ select CPU_HAS_NO_BITFIELDS
+ select CPU_HAS_NO_UNALIGNED
+ help
+ The Freescale (was then Motorola) CPU32 is a CPU core that is
+ based on the 68020 processor. For the most part it is used in
+ System-On-Chip parts, and does not contain a paging MMU.
+
+config M68020
+ bool "68020 support"
+ depends on MMU
+ select CPU_HAS_ADDRESS_SPACES
+ help
+ If you anticipate running this kernel on a computer with a MC68020
+ processor, say Y. Otherwise, say N. Note that the 68020 requires a
+ 68851 MMU (Memory Management Unit) to run Linux/m68k, except on the
+ Sun 3, which provides its own version.
+
+config M68030
+ bool "68030 support"
+ depends on MMU && !MMU_SUN3
+ select CPU_HAS_ADDRESS_SPACES
+ help
+ If you anticipate running this kernel on a computer with a MC68030
+ processor, say Y. Otherwise, say N. Note that a MC68EC030 will not
+ work, as it does not include an MMU (Memory Management Unit).
+
+config M68040
+ bool "68040 support"
+ depends on MMU && !MMU_SUN3
+ select CPU_HAS_ADDRESS_SPACES
+ help
+ If you anticipate running this kernel on a computer with a MC68LC040
+ or MC68040 processor, say Y. Otherwise, say N. Note that an
+ MC68EC040 will not work, as it does not include an MMU (Memory
+ Management Unit).
+
+config M68060
+ bool "68060 support"
+ depends on MMU && !MMU_SUN3
+ select CPU_HAS_ADDRESS_SPACES
+ help
+ If you anticipate running this kernel on a computer with a MC68060
+ processor, say Y. Otherwise, say N.
+
+config M68328
+ bool "MC68328"
+ depends on !MMU
+ select M68000
+ help
+ Motorola 68328 processor support.
+
+config M68EZ328
+ bool "MC68EZ328"
+ depends on !MMU
+ select M68000
+ help
+ Motorola 68EX328 processor support.
+
+config M68VZ328
+ bool "MC68VZ328"
+ depends on !MMU
+ select M68000
+ help
+ Motorola 68VZ328 processor support.
+
+config M68360
+ bool "MC68360"
+ depends on !MMU
+ select MCPU32
+ help
+ Motorola 68360 processor support.
+
+endif # M68KCLASSIC
+
+if COLDFIRE
+
+config M5206
+ bool "MCF5206"
+ depends on !MMU
+ select COLDFIRE_SW_A7
+ select HAVE_MBAR
+ help
+ Motorola ColdFire 5206 processor support.
+
+config M5206e
+ bool "MCF5206e"
+ depends on !MMU
+ select COLDFIRE_SW_A7
+ select HAVE_MBAR
+ help
+ Motorola ColdFire 5206e processor support.
+
+config M520x
+ bool "MCF520x"
+ depends on !MMU
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CACHE_SPLIT
+ help
+ Freescale Coldfire 5207/5208 processor support.
+
+config M523x
+ bool "MCF523x"
+ depends on !MMU
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CACHE_SPLIT
+ select HAVE_IPSBAR
+ help
+ Freescale Coldfire 5230/1/2/4/5 processor support
+
+config M5249
+ bool "MCF5249"
+ depends on !MMU
+ select COLDFIRE_SW_A7
+ select HAVE_MBAR
+ help
+ Motorola ColdFire 5249 processor support.
+
+config M525x
+ bool "MCF525x"
+ depends on !MMU
+ select COLDFIRE_SW_A7
+ select HAVE_MBAR
+ help
+ Freescale (Motorola) Coldfire 5251/5253 processor support.
+
+config M527x
+ bool
+
+config M5271
+ bool "MCF5271"
+ depends on !MMU
+ select M527x
+ select HAVE_CACHE_SPLIT
+ select HAVE_IPSBAR
+ select GENERIC_CLOCKEVENTS
+ help
+ Freescale (Motorola) ColdFire 5270/5271 processor support.
+
+config M5272
+ bool "MCF5272"
+ depends on !MMU
+ select COLDFIRE_SW_A7
+ select HAVE_MBAR
+ help
+ Motorola ColdFire 5272 processor support.
+
+config M5275
+ bool "MCF5275"
+ depends on !MMU
+ select M527x
+ select HAVE_CACHE_SPLIT
+ select HAVE_IPSBAR
+ select GENERIC_CLOCKEVENTS
+ help
+ Freescale (Motorola) ColdFire 5274/5275 processor support.
+
+config M528x
+ bool "MCF528x"
+ depends on !MMU
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CACHE_SPLIT
+ select HAVE_IPSBAR
+ help
+ Motorola ColdFire 5280/5282 processor support.
+
+config M5307
+ bool "MCF5307"
+ depends on !MMU
+ select COLDFIRE_SW_A7
+ select HAVE_CACHE_CB
+ select HAVE_MBAR
+ help
+ Motorola ColdFire 5307 processor support.
+
+config M53xx
+ bool
+
+config M532x
+ bool "MCF532x"
+ depends on !MMU
+ select M53xx
+ select HAVE_CACHE_CB
+ help
+ Freescale (Motorola) ColdFire 532x processor support.
+
+config M537x
+ bool "MCF537x"
+ depends on !MMU
+ select M53xx
+ select HAVE_CACHE_CB
+ help
+ Freescale ColdFire 537x processor support.
+
+config M5407
+ bool "MCF5407"
+ depends on !MMU
+ select COLDFIRE_SW_A7
+ select HAVE_CACHE_CB
+ select HAVE_MBAR
+ help
+ Motorola ColdFire 5407 processor support.
+
+config M54xx
+ bool
+
+config M547x
+ bool "MCF547x"
+ select M54xx
+ select MMU_COLDFIRE if MMU
+ select HAVE_CACHE_CB
+ select HAVE_MBAR
+ help
+ Freescale ColdFire 5470/5471/5472/5473/5474/5475 processor support.
+
+config M548x
+ bool "MCF548x"
+ select MMU_COLDFIRE if MMU
+ select M54xx
+ select HAVE_CACHE_CB
+ select HAVE_MBAR
+ help
+ Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support.
+
+config M5441x
+ bool "MCF5441x"
+ depends on !MMU
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CACHE_CB
+ help
+ Freescale Coldfire 54410/54415/54416/54417/54418 processor support.
+
+endif # COLDFIRE
+
+
+comment "Processor Specific Options"
+
+config M68KFPU_EMU
+ bool "Math emulation support"
+ depends on MMU
+ help
+ At some point in the future, this will cause floating-point math
+ instructions to be emulated by the kernel on machines that lack a
+ floating-point math coprocessor. Thrill-seekers and chronically
+ sleep-deprived psychotic hacker types can say Y now, everyone else
+ should probably wait a while.
+
+config M68KFPU_EMU_EXTRAPREC
+ bool "Math emulation extra precision"
+ depends on M68KFPU_EMU
+ help
+ The fpu uses normally a few bit more during calculations for
+ correct rounding, the emulator can (often) do the same but this
+ extra calculation can cost quite some time, so you can disable
+ it here. The emulator will then "only" calculate with a 64 bit
+ mantissa and round slightly incorrect, what is more than enough
+ for normal usage.
+
+config M68KFPU_EMU_ONLY
+ bool "Math emulation only kernel"
+ depends on M68KFPU_EMU
+ help
+ This option prevents any floating-point instructions from being
+ compiled into the kernel, thereby the kernel doesn't save any
+ floating point context anymore during task switches, so this
+ kernel will only be usable on machines without a floating-point
+ math coprocessor. This makes the kernel a bit faster as no tests
+ needs to be executed whether a floating-point instruction in the
+ kernel should be executed or not.
+
+config ADVANCED
+ bool "Advanced configuration options"
+ depends on MMU
+ ---help---
+ This gives you access to some advanced options for the CPU. The
+ defaults should be fine for most users, but these options may make
+ it possible for you to improve performance somewhat if you know what
+ you are doing.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about these options.
+
+ Most users should say N to this question.
+
+config RMW_INSNS
+ bool "Use read-modify-write instructions"
+ depends on ADVANCED
+ ---help---
+ This allows to use certain instructions that work with indivisible
+ read-modify-write bus cycles. While this is faster than the
+ workaround of disabling interrupts, it can conflict with DMA
+ ( = direct memory access) on many Amiga systems, and it is also said
+ to destabilize other machines. It is very likely that this will
+ cause serious problems on any Amiga or Atari Medusa if set. The only
+ configuration where it should work are 68030-based Ataris, where it
+ apparently improves performance. But you've been warned! Unless you
+ really know what you are doing, say N. Try Y only if you're quite
+ adventurous.
+
+config SINGLE_MEMORY_CHUNK
+ bool "Use one physical chunk of memory only" if ADVANCED && !SUN3
+ depends on MMU
+ default y if SUN3
+ select NEED_MULTIPLE_NODES
+ help
+ Ignore all but the first contiguous chunk of physical memory for VM
+ purposes. This will save a few bytes kernel size and may speed up
+ some operations. Say N if not sure.
+
+config ARCH_DISCONTIGMEM_ENABLE
+ def_bool MMU && !SINGLE_MEMORY_CHUNK
+
+config 060_WRITETHROUGH
+ bool "Use write-through caching for 68060 supervisor accesses"
+ depends on ADVANCED && M68060
+ ---help---
+ The 68060 generally uses copyback caching of recently accessed data.
+ Copyback caching means that memory writes will be held in an on-chip
+ cache and only written back to memory some time later. Saying Y
+ here will force supervisor (kernel) accesses to use writethrough
+ caching. Writethrough caching means that data is written to memory
+ straight away, so that cache and memory data always agree.
+ Writethrough caching is less efficient, but is needed for some
+ drivers on 68060 based systems where the 68060 bus snooping signal
+ is hardwired on. The 53c710 SCSI driver is known to suffer from
+ this problem.
+
+config M68K_L2_CACHE
+ bool
+ depends on MAC
+ default y
+
+config NODES_SHIFT
+ int
+ default "3"
+ depends on !SINGLE_MEMORY_CHUNK
+
+config CPU_HAS_NO_BITFIELDS
+ bool
+
+config CPU_HAS_NO_MULDIV64
+ bool
+
+config CPU_HAS_NO_UNALIGNED
+ bool
+
+config CPU_HAS_ADDRESS_SPACES
+ bool
+
+config FPU
+ bool
+
+config COLDFIRE_SW_A7
+ bool
+
+config HAVE_CACHE_SPLIT
+ bool
+
+config HAVE_CACHE_CB
+ bool
+
+config HAVE_MBAR
+ bool
+
+config HAVE_IPSBAR
+ bool
+
+config CLOCK_SET
+ bool "Enable setting the CPU clock frequency"
+ depends on COLDFIRE
+ default n
+ help
+ On some CPU's you do not need to know what the core CPU clock
+ frequency is. On these you can disable clock setting. On some
+ traditional 68K parts, and on all ColdFire parts you need to set
+ the appropriate CPU clock frequency. On these devices many of the
+ onboard peripherals derive their timing from the master CPU clock
+ frequency.
+
+config CLOCK_FREQ
+ int "Set the core clock frequency"
+ default "66666666"
+ depends on CLOCK_SET
+ help
+ Define the CPU clock frequency in use. This is the core clock
+ frequency, it may or may not be the same as the external clock
+ crystal fitted to your board. Some processors have an internal
+ PLL and can have their frequency programmed at run time, others
+ use internal dividers. In general the kernel won't setup a PLL
+ if it is fitted (there are some exceptions). This value will be
+ specific to the exact CPU that you are using.
+
+config OLDMASK
+ bool "Old mask 5307 (1H55J) silicon"
+ depends on M5307
+ help
+ Build support for the older revision ColdFire 5307 silicon.
+ Specifically this is the 1H55J mask revision.
+
+if HAVE_CACHE_SPLIT
+choice
+ prompt "Split Cache Configuration"
+ default CACHE_I
+
+config CACHE_I
+ bool "Instruction"
+ help
+ Use all of the ColdFire CPU cache memory as an instruction cache.
+
+config CACHE_D
+ bool "Data"
+ help
+ Use all of the ColdFire CPU cache memory as a data cache.
+
+config CACHE_BOTH
+ bool "Both"
+ help
+ Split the ColdFire CPU cache, and use half as an instruction cache
+ and half as a data cache.
+endchoice
+endif
+
+if HAVE_CACHE_CB
+choice
+ prompt "Data cache mode"
+ default CACHE_WRITETHRU
+
+config CACHE_WRITETHRU
+ bool "Write-through"
+ help
+ The ColdFire CPU cache is set into Write-through mode.
+
+config CACHE_COPYBACK
+ bool "Copy-back"
+ help
+ The ColdFire CPU cache is set into Copy-back mode.
+endchoice
+endif
+