summaryrefslogtreecommitdiffstats
path: root/kernel/arch/ia64/sn/pci/tioce_provider.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/ia64/sn/pci/tioce_provider.c')
-rw-r--r--kernel/arch/ia64/sn/pci/tioce_provider.c1062
1 files changed, 1062 insertions, 0 deletions
diff --git a/kernel/arch/ia64/sn/pci/tioce_provider.c b/kernel/arch/ia64/sn/pci/tioce_provider.c
new file mode 100644
index 000000000..46d3df4b0
--- /dev/null
+++ b/kernel/arch/ia64/sn/pci/tioce_provider.c
@@ -0,0 +1,1062 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003-2006 Silicon Graphics, Inc. All Rights Reserved.
+ */
+
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <asm/sn/sn_sal.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/io.h>
+#include <asm/sn/pcidev.h>
+#include <asm/sn/pcibus_provider_defs.h>
+#include <asm/sn/tioce_provider.h>
+
+/*
+ * 1/26/2006
+ *
+ * WAR for SGI PV 944642. For revA TIOCE, need to use the following recipe
+ * (taken from the above PV) before and after accessing tioce internal MMR's
+ * to avoid tioce lockups.
+ *
+ * The recipe as taken from the PV:
+ *
+ * if(mmr address < 0x45000) {
+ * if(mmr address == 0 or 0x80)
+ * mmr wrt or read address 0xc0
+ * else if(mmr address == 0x148 or 0x200)
+ * mmr wrt or read address 0x28
+ * else
+ * mmr wrt or read address 0x158
+ *
+ * do desired mmr access (rd or wrt)
+ *
+ * if(mmr address == 0x100)
+ * mmr wrt or read address 0x38
+ * mmr wrt or read address 0xb050
+ * } else
+ * do desired mmr access
+ *
+ * According to hw, we can use reads instead of writes to the above address
+ *
+ * Note this WAR can only to be used for accessing internal MMR's in the
+ * TIOCE Coretalk Address Range 0x0 - 0x07ff_ffff. This includes the
+ * "Local CE Registers and Memories" and "PCI Compatible Config Space" address
+ * spaces from table 2-1 of the "CE Programmer's Reference Overview" document.
+ *
+ * All registers defined in struct tioce will meet that criteria.
+ */
+
+static void inline
+tioce_mmr_war_pre(struct tioce_kernel *kern, void __iomem *mmr_addr)
+{
+ u64 mmr_base;
+ u64 mmr_offset;
+
+ if (kern->ce_common->ce_rev != TIOCE_REV_A)
+ return;
+
+ mmr_base = kern->ce_common->ce_pcibus.bs_base;
+ mmr_offset = (unsigned long)mmr_addr - mmr_base;
+
+ if (mmr_offset < 0x45000) {
+ u64 mmr_war_offset;
+
+ if (mmr_offset == 0 || mmr_offset == 0x80)
+ mmr_war_offset = 0xc0;
+ else if (mmr_offset == 0x148 || mmr_offset == 0x200)
+ mmr_war_offset = 0x28;
+ else
+ mmr_war_offset = 0x158;
+
+ readq_relaxed((void __iomem *)(mmr_base + mmr_war_offset));
+ }
+}
+
+static void inline
+tioce_mmr_war_post(struct tioce_kernel *kern, void __iomem *mmr_addr)
+{
+ u64 mmr_base;
+ u64 mmr_offset;
+
+ if (kern->ce_common->ce_rev != TIOCE_REV_A)
+ return;
+
+ mmr_base = kern->ce_common->ce_pcibus.bs_base;
+ mmr_offset = (unsigned long)mmr_addr - mmr_base;
+
+ if (mmr_offset < 0x45000) {
+ if (mmr_offset == 0x100)
+ readq_relaxed((void __iomem *)(mmr_base + 0x38));
+ readq_relaxed((void __iomem *)(mmr_base + 0xb050));
+ }
+}
+
+/* load mmr contents into a variable */
+#define tioce_mmr_load(kern, mmrp, varp) do {\
+ tioce_mmr_war_pre(kern, mmrp); \
+ *(varp) = readq_relaxed(mmrp); \
+ tioce_mmr_war_post(kern, mmrp); \
+} while (0)
+
+/* store variable contents into mmr */
+#define tioce_mmr_store(kern, mmrp, varp) do {\
+ tioce_mmr_war_pre(kern, mmrp); \
+ writeq(*varp, mmrp); \
+ tioce_mmr_war_post(kern, mmrp); \
+} while (0)
+
+/* store immediate value into mmr */
+#define tioce_mmr_storei(kern, mmrp, val) do {\
+ tioce_mmr_war_pre(kern, mmrp); \
+ writeq(val, mmrp); \
+ tioce_mmr_war_post(kern, mmrp); \
+} while (0)
+
+/* set bits (immediate value) into mmr */
+#define tioce_mmr_seti(kern, mmrp, bits) do {\
+ u64 tmp; \
+ tioce_mmr_load(kern, mmrp, &tmp); \
+ tmp |= (bits); \
+ tioce_mmr_store(kern, mmrp, &tmp); \
+} while (0)
+
+/* clear bits (immediate value) into mmr */
+#define tioce_mmr_clri(kern, mmrp, bits) do { \
+ u64 tmp; \
+ tioce_mmr_load(kern, mmrp, &tmp); \
+ tmp &= ~(bits); \
+ tioce_mmr_store(kern, mmrp, &tmp); \
+} while (0)
+
+/**
+ * Bus address ranges for the 5 flavors of TIOCE DMA
+ */
+
+#define TIOCE_D64_MIN 0x8000000000000000UL
+#define TIOCE_D64_MAX 0xffffffffffffffffUL
+#define TIOCE_D64_ADDR(a) ((a) >= TIOCE_D64_MIN)
+
+#define TIOCE_D32_MIN 0x0000000080000000UL
+#define TIOCE_D32_MAX 0x00000000ffffffffUL
+#define TIOCE_D32_ADDR(a) ((a) >= TIOCE_D32_MIN && (a) <= TIOCE_D32_MAX)
+
+#define TIOCE_M32_MIN 0x0000000000000000UL
+#define TIOCE_M32_MAX 0x000000007fffffffUL
+#define TIOCE_M32_ADDR(a) ((a) >= TIOCE_M32_MIN && (a) <= TIOCE_M32_MAX)
+
+#define TIOCE_M40_MIN 0x0000004000000000UL
+#define TIOCE_M40_MAX 0x0000007fffffffffUL
+#define TIOCE_M40_ADDR(a) ((a) >= TIOCE_M40_MIN && (a) <= TIOCE_M40_MAX)
+
+#define TIOCE_M40S_MIN 0x0000008000000000UL
+#define TIOCE_M40S_MAX 0x000000ffffffffffUL
+#define TIOCE_M40S_ADDR(a) ((a) >= TIOCE_M40S_MIN && (a) <= TIOCE_M40S_MAX)
+
+/*
+ * ATE manipulation macros.
+ */
+
+#define ATE_PAGESHIFT(ps) (__ffs(ps))
+#define ATE_PAGEMASK(ps) ((ps)-1)
+
+#define ATE_PAGE(x, ps) ((x) >> ATE_PAGESHIFT(ps))
+#define ATE_NPAGES(start, len, pagesize) \
+ (ATE_PAGE((start)+(len)-1, pagesize) - ATE_PAGE(start, pagesize) + 1)
+
+#define ATE_VALID(ate) ((ate) & (1UL << 63))
+#define ATE_MAKE(addr, ps, msi) \
+ (((addr) & ~ATE_PAGEMASK(ps)) | (1UL << 63) | ((msi)?(1UL << 62):0))
+
+/*
+ * Flavors of ate-based mapping supported by tioce_alloc_map()
+ */
+
+#define TIOCE_ATE_M32 1
+#define TIOCE_ATE_M40 2
+#define TIOCE_ATE_M40S 3
+
+#define KB(x) ((u64)(x) << 10)
+#define MB(x) ((u64)(x) << 20)
+#define GB(x) ((u64)(x) << 30)
+
+/**
+ * tioce_dma_d64 - create a DMA mapping using 64-bit direct mode
+ * @ct_addr: system coretalk address
+ *
+ * Map @ct_addr into 64-bit CE bus space. No device context is necessary
+ * and no CE mapping are consumed.
+ *
+ * Bits 53:0 come from the coretalk address. The remaining bits are set as
+ * follows:
+ *
+ * 63 - must be 1 to indicate d64 mode to CE hardware
+ * 62 - barrier bit ... controlled with tioce_dma_barrier()
+ * 61 - msi bit ... specified through dma_flags
+ * 60:54 - reserved, MBZ
+ */
+static u64
+tioce_dma_d64(unsigned long ct_addr, int dma_flags)
+{
+ u64 bus_addr;
+
+ bus_addr = ct_addr | (1UL << 63);
+ if (dma_flags & SN_DMA_MSI)
+ bus_addr |= (1UL << 61);
+
+ return bus_addr;
+}
+
+/**
+ * pcidev_to_tioce - return misc ce related pointers given a pci_dev
+ * @pci_dev: pci device context
+ * @base: ptr to store struct tioce_mmr * for the CE holding this device
+ * @kernel: ptr to store struct tioce_kernel * for the CE holding this device
+ * @port: ptr to store the CE port number that this device is on
+ *
+ * Return pointers to various CE-related structures for the CE upstream of
+ * @pci_dev.
+ */
+static inline void
+pcidev_to_tioce(struct pci_dev *pdev, struct tioce __iomem **base,
+ struct tioce_kernel **kernel, int *port)
+{
+ struct pcidev_info *pcidev_info;
+ struct tioce_common *ce_common;
+ struct tioce_kernel *ce_kernel;
+
+ pcidev_info = SN_PCIDEV_INFO(pdev);
+ ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info;
+ ce_kernel = (struct tioce_kernel *)ce_common->ce_kernel_private;
+
+ if (base)
+ *base = (struct tioce __iomem *)ce_common->ce_pcibus.bs_base;
+ if (kernel)
+ *kernel = ce_kernel;
+
+ /*
+ * we use port as a zero-based value internally, even though the
+ * documentation is 1-based.
+ */
+ if (port)
+ *port =
+ (pdev->bus->number < ce_kernel->ce_port1_secondary) ? 0 : 1;
+}
+
+/**
+ * tioce_alloc_map - Given a coretalk address, map it to pcie bus address
+ * space using one of the various ATE-based address modes.
+ * @ce_kern: tioce context
+ * @type: map mode to use
+ * @port: 0-based port that the requesting device is downstream of
+ * @ct_addr: the coretalk address to map
+ * @len: number of bytes to map
+ *
+ * Given the addressing type, set up various parameters that define the
+ * ATE pool to use. Search for a contiguous block of entries to cover the
+ * length, and if enough resources exist, fill in the ATEs and construct a
+ * tioce_dmamap struct to track the mapping.
+ */
+static u64
+tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port,
+ u64 ct_addr, int len, int dma_flags)
+{
+ int i;
+ int j;
+ int first;
+ int last;
+ int entries;
+ int nates;
+ u64 pagesize;
+ int msi_capable, msi_wanted;
+ u64 *ate_shadow;
+ u64 __iomem *ate_reg;
+ u64 addr;
+ struct tioce __iomem *ce_mmr;
+ u64 bus_base;
+ struct tioce_dmamap *map;
+
+ ce_mmr = (struct tioce __iomem *)ce_kern->ce_common->ce_pcibus.bs_base;
+
+ switch (type) {
+ case TIOCE_ATE_M32:
+ /*
+ * The first 64 entries of the ate3240 pool are dedicated to
+ * super-page (TIOCE_ATE_M40S) mode.
+ */
+ first = 64;
+ entries = TIOCE_NUM_M3240_ATES - 64;
+ ate_shadow = ce_kern->ce_ate3240_shadow;
+ ate_reg = ce_mmr->ce_ure_ate3240;
+ pagesize = ce_kern->ce_ate3240_pagesize;
+ bus_base = TIOCE_M32_MIN;
+ msi_capable = 1;
+ break;
+ case TIOCE_ATE_M40:
+ first = 0;
+ entries = TIOCE_NUM_M40_ATES;
+ ate_shadow = ce_kern->ce_ate40_shadow;
+ ate_reg = ce_mmr->ce_ure_ate40;
+ pagesize = MB(64);
+ bus_base = TIOCE_M40_MIN;
+ msi_capable = 0;
+ break;
+ case TIOCE_ATE_M40S:
+ /*
+ * ate3240 entries 0-31 are dedicated to port1 super-page
+ * mappings. ate3240 entries 32-63 are dedicated to port2.
+ */
+ first = port * 32;
+ entries = 32;
+ ate_shadow = ce_kern->ce_ate3240_shadow;
+ ate_reg = ce_mmr->ce_ure_ate3240;
+ pagesize = GB(16);
+ bus_base = TIOCE_M40S_MIN;
+ msi_capable = 0;
+ break;
+ default:
+ return 0;
+ }
+
+ msi_wanted = dma_flags & SN_DMA_MSI;
+ if (msi_wanted && !msi_capable)
+ return 0;
+
+ nates = ATE_NPAGES(ct_addr, len, pagesize);
+ if (nates > entries)
+ return 0;
+
+ last = first + entries - nates;
+ for (i = first; i <= last; i++) {
+ if (ATE_VALID(ate_shadow[i]))
+ continue;
+
+ for (j = i; j < i + nates; j++)
+ if (ATE_VALID(ate_shadow[j]))
+ break;
+
+ if (j >= i + nates)
+ break;
+ }
+
+ if (i > last)
+ return 0;
+
+ map = kzalloc(sizeof(struct tioce_dmamap), GFP_ATOMIC);
+ if (!map)
+ return 0;
+
+ addr = ct_addr;
+ for (j = 0; j < nates; j++) {
+ u64 ate;
+
+ ate = ATE_MAKE(addr, pagesize, msi_wanted);
+ ate_shadow[i + j] = ate;
+ tioce_mmr_storei(ce_kern, &ate_reg[i + j], ate);
+ addr += pagesize;
+ }
+
+ map->refcnt = 1;
+ map->nbytes = nates * pagesize;
+ map->ct_start = ct_addr & ~ATE_PAGEMASK(pagesize);
+ map->pci_start = bus_base + (i * pagesize);
+ map->ate_hw = &ate_reg[i];
+ map->ate_shadow = &ate_shadow[i];
+ map->ate_count = nates;
+
+ list_add(&map->ce_dmamap_list, &ce_kern->ce_dmamap_list);
+
+ return (map->pci_start + (ct_addr - map->ct_start));
+}
+
+/**
+ * tioce_dma_d32 - create a DMA mapping using 32-bit direct mode
+ * @pdev: linux pci_dev representing the function
+ * @paddr: system physical address
+ *
+ * Map @paddr into 32-bit bus space of the CE associated with @pcidev_info.
+ */
+static u64
+tioce_dma_d32(struct pci_dev *pdev, u64 ct_addr, int dma_flags)
+{
+ int dma_ok;
+ int port;
+ struct tioce __iomem *ce_mmr;
+ struct tioce_kernel *ce_kern;
+ u64 ct_upper;
+ u64 ct_lower;
+ dma_addr_t bus_addr;
+
+ if (dma_flags & SN_DMA_MSI)
+ return 0;
+
+ ct_upper = ct_addr & ~0x3fffffffUL;
+ ct_lower = ct_addr & 0x3fffffffUL;
+
+ pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port);
+
+ if (ce_kern->ce_port[port].dirmap_refcnt == 0) {
+ u64 tmp;
+
+ ce_kern->ce_port[port].dirmap_shadow = ct_upper;
+ tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_dir_map[port],
+ ct_upper);
+ tmp = ce_mmr->ce_ure_dir_map[port];
+ dma_ok = 1;
+ } else
+ dma_ok = (ce_kern->ce_port[port].dirmap_shadow == ct_upper);
+
+ if (dma_ok) {
+ ce_kern->ce_port[port].dirmap_refcnt++;
+ bus_addr = TIOCE_D32_MIN + ct_lower;
+ } else
+ bus_addr = 0;
+
+ return bus_addr;
+}
+
+/**
+ * tioce_dma_barrier - swizzle a TIOCE bus address to include or exclude
+ * the barrier bit.
+ * @bus_addr: bus address to swizzle
+ *
+ * Given a TIOCE bus address, set the appropriate bit to indicate barrier
+ * attributes.
+ */
+static u64
+tioce_dma_barrier(u64 bus_addr, int on)
+{
+ u64 barrier_bit;
+
+ /* barrier not supported in M40/M40S mode */
+ if (TIOCE_M40_ADDR(bus_addr) || TIOCE_M40S_ADDR(bus_addr))
+ return bus_addr;
+
+ if (TIOCE_D64_ADDR(bus_addr))
+ barrier_bit = (1UL << 62);
+ else /* must be m32 or d32 */
+ barrier_bit = (1UL << 30);
+
+ return (on) ? (bus_addr | barrier_bit) : (bus_addr & ~barrier_bit);
+}
+
+/**
+ * tioce_dma_unmap - release CE mapping resources
+ * @pdev: linux pci_dev representing the function
+ * @bus_addr: bus address returned by an earlier tioce_dma_map
+ * @dir: mapping direction (unused)
+ *
+ * Locate mapping resources associated with @bus_addr and release them.
+ * For mappings created using the direct modes there are no resources
+ * to release.
+ */
+void
+tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
+{
+ int i;
+ int port;
+ struct tioce_kernel *ce_kern;
+ struct tioce __iomem *ce_mmr;
+ unsigned long flags;
+
+ bus_addr = tioce_dma_barrier(bus_addr, 0);
+ pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port);
+
+ /* nothing to do for D64 */
+
+ if (TIOCE_D64_ADDR(bus_addr))
+ return;
+
+ spin_lock_irqsave(&ce_kern->ce_lock, flags);
+
+ if (TIOCE_D32_ADDR(bus_addr)) {
+ if (--ce_kern->ce_port[port].dirmap_refcnt == 0) {
+ ce_kern->ce_port[port].dirmap_shadow = 0;
+ tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_dir_map[port],
+ 0);
+ }
+ } else {
+ struct tioce_dmamap *map;
+
+ list_for_each_entry(map, &ce_kern->ce_dmamap_list,
+ ce_dmamap_list) {
+ u64 last;
+
+ last = map->pci_start + map->nbytes - 1;
+ if (bus_addr >= map->pci_start && bus_addr <= last)
+ break;
+ }
+
+ if (&map->ce_dmamap_list == &ce_kern->ce_dmamap_list) {
+ printk(KERN_WARNING
+ "%s: %s - no map found for bus_addr 0x%llx\n",
+ __func__, pci_name(pdev), bus_addr);
+ } else if (--map->refcnt == 0) {
+ for (i = 0; i < map->ate_count; i++) {
+ map->ate_shadow[i] = 0;
+ tioce_mmr_storei(ce_kern, &map->ate_hw[i], 0);
+ }
+
+ list_del(&map->ce_dmamap_list);
+ kfree(map);
+ }
+ }
+
+ spin_unlock_irqrestore(&ce_kern->ce_lock, flags);
+}
+
+/**
+ * tioce_do_dma_map - map pages for PCI DMA
+ * @pdev: linux pci_dev representing the function
+ * @paddr: host physical address to map
+ * @byte_count: bytes to map
+ *
+ * This is the main wrapper for mapping host physical pages to CE PCI space.
+ * The mapping mode used is based on the device's dma_mask.
+ */
+static u64
+tioce_do_dma_map(struct pci_dev *pdev, u64 paddr, size_t byte_count,
+ int barrier, int dma_flags)
+{
+ unsigned long flags;
+ u64 ct_addr;
+ u64 mapaddr = 0;
+ struct tioce_kernel *ce_kern;
+ struct tioce_dmamap *map;
+ int port;
+ u64 dma_mask;
+
+ dma_mask = (barrier) ? pdev->dev.coherent_dma_mask : pdev->dma_mask;
+
+ /* cards must be able to address at least 31 bits */
+ if (dma_mask < 0x7fffffffUL)
+ return 0;
+
+ if (SN_DMA_ADDRTYPE(dma_flags) == SN_DMA_ADDR_PHYS)
+ ct_addr = PHYS_TO_TIODMA(paddr);
+ else
+ ct_addr = paddr;
+
+ /*
+ * If the device can generate 64 bit addresses, create a D64 map.
+ */
+ if (dma_mask == ~0UL) {
+ mapaddr = tioce_dma_d64(ct_addr, dma_flags);
+ if (mapaddr)
+ goto dma_map_done;
+ }
+
+ pcidev_to_tioce(pdev, NULL, &ce_kern, &port);
+
+ spin_lock_irqsave(&ce_kern->ce_lock, flags);
+
+ /*
+ * D64 didn't work ... See if we have an existing map that covers
+ * this address range. Must account for devices dma_mask here since
+ * an existing map might have been done in a mode using more pci
+ * address bits than this device can support.
+ */
+ list_for_each_entry(map, &ce_kern->ce_dmamap_list, ce_dmamap_list) {
+ u64 last;
+
+ last = map->ct_start + map->nbytes - 1;
+ if (ct_addr >= map->ct_start &&
+ ct_addr + byte_count - 1 <= last &&
+ map->pci_start <= dma_mask) {
+ map->refcnt++;
+ mapaddr = map->pci_start + (ct_addr - map->ct_start);
+ break;
+ }
+ }
+
+ /*
+ * If we don't have a map yet, and the card can generate 40
+ * bit addresses, try the M40/M40S modes. Note these modes do not
+ * support a barrier bit, so if we need a consistent map these
+ * won't work.
+ */
+ if (!mapaddr && !barrier && dma_mask >= 0xffffffffffUL) {
+ /*
+ * We have two options for 40-bit mappings: 16GB "super" ATEs
+ * and 64MB "regular" ATEs. We'll try both if needed for a
+ * given mapping but which one we try first depends on the
+ * size. For requests >64MB, prefer to use a super page with
+ * regular as the fallback. Otherwise, try in the reverse order.
+ */
+
+ if (byte_count > MB(64)) {
+ mapaddr = tioce_alloc_map(ce_kern, TIOCE_ATE_M40S,
+ port, ct_addr, byte_count,
+ dma_flags);
+ if (!mapaddr)
+ mapaddr =
+ tioce_alloc_map(ce_kern, TIOCE_ATE_M40, -1,
+ ct_addr, byte_count,
+ dma_flags);
+ } else {
+ mapaddr = tioce_alloc_map(ce_kern, TIOCE_ATE_M40, -1,
+ ct_addr, byte_count,
+ dma_flags);
+ if (!mapaddr)
+ mapaddr =
+ tioce_alloc_map(ce_kern, TIOCE_ATE_M40S,
+ port, ct_addr, byte_count,
+ dma_flags);
+ }
+ }
+
+ /*
+ * 32-bit direct is the next mode to try
+ */
+ if (!mapaddr && dma_mask >= 0xffffffffUL)
+ mapaddr = tioce_dma_d32(pdev, ct_addr, dma_flags);
+
+ /*
+ * Last resort, try 32-bit ATE-based map.
+ */
+ if (!mapaddr)
+ mapaddr =
+ tioce_alloc_map(ce_kern, TIOCE_ATE_M32, -1, ct_addr,
+ byte_count, dma_flags);
+
+ spin_unlock_irqrestore(&ce_kern->ce_lock, flags);
+
+dma_map_done:
+ if (mapaddr && barrier)
+ mapaddr = tioce_dma_barrier(mapaddr, 1);
+
+ return mapaddr;
+}
+
+/**
+ * tioce_dma - standard pci dma map interface
+ * @pdev: pci device requesting the map
+ * @paddr: system physical address to map into pci space
+ * @byte_count: # bytes to map
+ *
+ * Simply call tioce_do_dma_map() to create a map with the barrier bit clear
+ * in the address.
+ */
+static u64
+tioce_dma(struct pci_dev *pdev, unsigned long paddr, size_t byte_count, int dma_flags)
+{
+ return tioce_do_dma_map(pdev, paddr, byte_count, 0, dma_flags);
+}
+
+/**
+ * tioce_dma_consistent - consistent pci dma map interface
+ * @pdev: pci device requesting the map
+ * @paddr: system physical address to map into pci space
+ * @byte_count: # bytes to map
+ *
+ * Simply call tioce_do_dma_map() to create a map with the barrier bit set
+ * in the address.
+ */
+static u64
+tioce_dma_consistent(struct pci_dev *pdev, unsigned long paddr, size_t byte_count, int dma_flags)
+{
+ return tioce_do_dma_map(pdev, paddr, byte_count, 1, dma_flags);
+}
+
+/**
+ * tioce_error_intr_handler - SGI TIO CE error interrupt handler
+ * @irq: unused
+ * @arg: pointer to tioce_common struct for the given CE
+ *
+ * Handle a CE error interrupt. Simply a wrapper around a SAL call which
+ * defers processing to the SGI prom.
+ */
+static irqreturn_t
+tioce_error_intr_handler(int irq, void *arg)
+{
+ struct tioce_common *soft = arg;
+ struct ia64_sal_retval ret_stuff;
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+
+ SAL_CALL_NOLOCK(ret_stuff, (u64) SN_SAL_IOIF_ERROR_INTERRUPT,
+ soft->ce_pcibus.bs_persist_segment,
+ soft->ce_pcibus.bs_persist_busnum, 0, 0, 0, 0, 0);
+
+ if (ret_stuff.v0)
+ panic("tioce_error_intr_handler: Fatal TIOCE error");
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * tioce_reserve_m32 - reserve M32 ATEs for the indicated address range
+ * @tioce_kernel: TIOCE context to reserve ATEs for
+ * @base: starting bus address to reserve
+ * @limit: last bus address to reserve
+ *
+ * If base/limit falls within the range of bus space mapped through the
+ * M32 space, reserve the resources corresponding to the range.
+ */
+static void
+tioce_reserve_m32(struct tioce_kernel *ce_kern, u64 base, u64 limit)
+{
+ int ate_index, last_ate, ps;
+ struct tioce __iomem *ce_mmr;
+
+ ce_mmr = (struct tioce __iomem *)ce_kern->ce_common->ce_pcibus.bs_base;
+ ps = ce_kern->ce_ate3240_pagesize;
+ ate_index = ATE_PAGE(base, ps);
+ last_ate = ate_index + ATE_NPAGES(base, limit-base+1, ps) - 1;
+
+ if (ate_index < 64)
+ ate_index = 64;
+
+ if (last_ate >= TIOCE_NUM_M3240_ATES)
+ last_ate = TIOCE_NUM_M3240_ATES - 1;
+
+ while (ate_index <= last_ate) {
+ u64 ate;
+
+ ate = ATE_MAKE(0xdeadbeef, ps, 0);
+ ce_kern->ce_ate3240_shadow[ate_index] = ate;
+ tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_ate3240[ate_index],
+ ate);
+ ate_index++;
+ }
+}
+
+/**
+ * tioce_kern_init - init kernel structures related to a given TIOCE
+ * @tioce_common: ptr to a cached tioce_common struct that originated in prom
+ */
+static struct tioce_kernel *
+tioce_kern_init(struct tioce_common *tioce_common)
+{
+ int i;
+ int ps;
+ int dev;
+ u32 tmp;
+ unsigned int seg, bus;
+ struct tioce __iomem *tioce_mmr;
+ struct tioce_kernel *tioce_kern;
+
+ tioce_kern = kzalloc(sizeof(struct tioce_kernel), GFP_KERNEL);
+ if (!tioce_kern) {
+ return NULL;
+ }
+
+ tioce_kern->ce_common = tioce_common;
+ spin_lock_init(&tioce_kern->ce_lock);
+ INIT_LIST_HEAD(&tioce_kern->ce_dmamap_list);
+ tioce_common->ce_kernel_private = (u64) tioce_kern;
+
+ /*
+ * Determine the secondary bus number of the port2 logical PPB.
+ * This is used to decide whether a given pci device resides on
+ * port1 or port2. Note: We don't have enough plumbing set up
+ * here to use pci_read_config_xxx() so use raw_pci_read().
+ */
+
+ seg = tioce_common->ce_pcibus.bs_persist_segment;
+ bus = tioce_common->ce_pcibus.bs_persist_busnum;
+
+ raw_pci_read(seg, bus, PCI_DEVFN(2, 0), PCI_SECONDARY_BUS, 1,&tmp);
+ tioce_kern->ce_port1_secondary = (u8) tmp;
+
+ /*
+ * Set PMU pagesize to the largest size available, and zero out
+ * the ATEs.
+ */
+
+ tioce_mmr = (struct tioce __iomem *)tioce_common->ce_pcibus.bs_base;
+ tioce_mmr_clri(tioce_kern, &tioce_mmr->ce_ure_page_map,
+ CE_URE_PAGESIZE_MASK);
+ tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_ure_page_map,
+ CE_URE_256K_PAGESIZE);
+ ps = tioce_kern->ce_ate3240_pagesize = KB(256);
+
+ for (i = 0; i < TIOCE_NUM_M40_ATES; i++) {
+ tioce_kern->ce_ate40_shadow[i] = 0;
+ tioce_mmr_storei(tioce_kern, &tioce_mmr->ce_ure_ate40[i], 0);
+ }
+
+ for (i = 0; i < TIOCE_NUM_M3240_ATES; i++) {
+ tioce_kern->ce_ate3240_shadow[i] = 0;
+ tioce_mmr_storei(tioce_kern, &tioce_mmr->ce_ure_ate3240[i], 0);
+ }
+
+ /*
+ * Reserve ATEs corresponding to reserved address ranges. These
+ * include:
+ *
+ * Memory space covered by each PPB mem base/limit register
+ * Memory space covered by each PPB prefetch base/limit register
+ *
+ * These bus ranges are for pio (downstream) traffic only, and so
+ * cannot be used for DMA.
+ */
+
+ for (dev = 1; dev <= 2; dev++) {
+ u64 base, limit;
+
+ /* mem base/limit */
+
+ raw_pci_read(seg, bus, PCI_DEVFN(dev, 0),
+ PCI_MEMORY_BASE, 2, &tmp);
+ base = (u64)tmp << 16;
+
+ raw_pci_read(seg, bus, PCI_DEVFN(dev, 0),
+ PCI_MEMORY_LIMIT, 2, &tmp);
+ limit = (u64)tmp << 16;
+ limit |= 0xfffffUL;
+
+ if (base < limit)
+ tioce_reserve_m32(tioce_kern, base, limit);
+
+ /*
+ * prefetch mem base/limit. The tioce ppb's have 64-bit
+ * decoders, so read the upper portions w/o checking the
+ * attributes.
+ */
+
+ raw_pci_read(seg, bus, PCI_DEVFN(dev, 0),
+ PCI_PREF_MEMORY_BASE, 2, &tmp);
+ base = ((u64)tmp & PCI_PREF_RANGE_MASK) << 16;
+
+ raw_pci_read(seg, bus, PCI_DEVFN(dev, 0),
+ PCI_PREF_BASE_UPPER32, 4, &tmp);
+ base |= (u64)tmp << 32;
+
+ raw_pci_read(seg, bus, PCI_DEVFN(dev, 0),
+ PCI_PREF_MEMORY_LIMIT, 2, &tmp);
+
+ limit = ((u64)tmp & PCI_PREF_RANGE_MASK) << 16;
+ limit |= 0xfffffUL;
+
+ raw_pci_read(seg, bus, PCI_DEVFN(dev, 0),
+ PCI_PREF_LIMIT_UPPER32, 4, &tmp);
+ limit |= (u64)tmp << 32;
+
+ if ((base < limit) && TIOCE_M32_ADDR(base))
+ tioce_reserve_m32(tioce_kern, base, limit);
+ }
+
+ return tioce_kern;
+}
+
+/**
+ * tioce_force_interrupt - implement altix force_interrupt() backend for CE
+ * @sn_irq_info: sn asic irq that we need an interrupt generated for
+ *
+ * Given an sn_irq_info struct, set the proper bit in ce_adm_force_int to
+ * force a secondary interrupt to be generated. This is to work around an
+ * asic issue where there is a small window of opportunity for a legacy device
+ * interrupt to be lost.
+ */
+static void
+tioce_force_interrupt(struct sn_irq_info *sn_irq_info)
+{
+ struct pcidev_info *pcidev_info;
+ struct tioce_common *ce_common;
+ struct tioce_kernel *ce_kern;
+ struct tioce __iomem *ce_mmr;
+ u64 force_int_val;
+
+ if (!sn_irq_info->irq_bridge)
+ return;
+
+ if (sn_irq_info->irq_bridge_type != PCIIO_ASIC_TYPE_TIOCE)
+ return;
+
+ pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
+ if (!pcidev_info)
+ return;
+
+ ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info;
+ ce_mmr = (struct tioce __iomem *)ce_common->ce_pcibus.bs_base;
+ ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private;
+
+ /*
+ * TIOCE Rev A workaround (PV 945826), force an interrupt by writing
+ * the TIO_INTx register directly (1/26/2006)
+ */
+ if (ce_common->ce_rev == TIOCE_REV_A) {
+ u64 int_bit_mask = (1ULL << sn_irq_info->irq_int_bit);
+ u64 status;
+
+ tioce_mmr_load(ce_kern, &ce_mmr->ce_adm_int_status, &status);
+ if (status & int_bit_mask) {
+ u64 force_irq = (1 << 8) | sn_irq_info->irq_irq;
+ u64 ctalk = sn_irq_info->irq_xtalkaddr;
+ u64 nasid, offset;
+
+ nasid = (ctalk & CTALK_NASID_MASK) >> CTALK_NASID_SHFT;
+ offset = (ctalk & CTALK_NODE_OFFSET);
+ HUB_S(TIO_IOSPACE_ADDR(nasid, offset), force_irq);
+ }
+
+ return;
+ }
+
+ /*
+ * irq_int_bit is originally set up by prom, and holds the interrupt
+ * bit shift (not mask) as defined by the bit definitions in the
+ * ce_adm_int mmr. These shifts are not the same for the
+ * ce_adm_force_int register, so do an explicit mapping here to make
+ * things clearer.
+ */
+
+ switch (sn_irq_info->irq_int_bit) {
+ case CE_ADM_INT_PCIE_PORT1_DEV_A_SHFT:
+ force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_A_SHFT;
+ break;
+ case CE_ADM_INT_PCIE_PORT1_DEV_B_SHFT:
+ force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_B_SHFT;
+ break;
+ case CE_ADM_INT_PCIE_PORT1_DEV_C_SHFT:
+ force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_C_SHFT;
+ break;
+ case CE_ADM_INT_PCIE_PORT1_DEV_D_SHFT:
+ force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_D_SHFT;
+ break;
+ case CE_ADM_INT_PCIE_PORT2_DEV_A_SHFT:
+ force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_A_SHFT;
+ break;
+ case CE_ADM_INT_PCIE_PORT2_DEV_B_SHFT:
+ force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_B_SHFT;
+ break;
+ case CE_ADM_INT_PCIE_PORT2_DEV_C_SHFT:
+ force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_C_SHFT;
+ break;
+ case CE_ADM_INT_PCIE_PORT2_DEV_D_SHFT:
+ force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_D_SHFT;
+ break;
+ default:
+ return;
+ }
+ tioce_mmr_storei(ce_kern, &ce_mmr->ce_adm_force_int, force_int_val);
+}
+
+/**
+ * tioce_target_interrupt - implement set_irq_affinity for tioce resident
+ * functions. Note: only applies to line interrupts, not MSI's.
+ *
+ * @sn_irq_info: SN IRQ context
+ *
+ * Given an sn_irq_info, set the associated CE device's interrupt destination
+ * register. Since the interrupt destination registers are on a per-ce-slot
+ * basis, this will retarget line interrupts for all functions downstream of
+ * the slot.
+ */
+static void
+tioce_target_interrupt(struct sn_irq_info *sn_irq_info)
+{
+ struct pcidev_info *pcidev_info;
+ struct tioce_common *ce_common;
+ struct tioce_kernel *ce_kern;
+ struct tioce __iomem *ce_mmr;
+ int bit;
+ u64 vector;
+
+ pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
+ if (!pcidev_info)
+ return;
+
+ ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info;
+ ce_mmr = (struct tioce __iomem *)ce_common->ce_pcibus.bs_base;
+ ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private;
+
+ bit = sn_irq_info->irq_int_bit;
+
+ tioce_mmr_seti(ce_kern, &ce_mmr->ce_adm_int_mask, (1UL << bit));
+ vector = (u64)sn_irq_info->irq_irq << INTR_VECTOR_SHFT;
+ vector |= sn_irq_info->irq_xtalkaddr;
+ tioce_mmr_storei(ce_kern, &ce_mmr->ce_adm_int_dest[bit], vector);
+ tioce_mmr_clri(ce_kern, &ce_mmr->ce_adm_int_mask, (1UL << bit));
+
+ tioce_force_interrupt(sn_irq_info);
+}
+
+/**
+ * tioce_bus_fixup - perform final PCI fixup for a TIO CE bus
+ * @prom_bussoft: Common prom/kernel struct representing the bus
+ *
+ * Replicates the tioce_common pointed to by @prom_bussoft in kernel
+ * space. Allocates and initializes a kernel-only area for a given CE,
+ * and sets up an irq for handling CE error interrupts.
+ *
+ * On successful setup, returns the kernel version of tioce_common back to
+ * the caller.
+ */
+static void *
+tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller)
+{
+ struct tioce_common *tioce_common;
+ struct tioce_kernel *tioce_kern;
+ struct tioce __iomem *tioce_mmr;
+
+ /*
+ * Allocate kernel bus soft and copy from prom.
+ */
+
+ tioce_common = kzalloc(sizeof(struct tioce_common), GFP_KERNEL);
+ if (!tioce_common)
+ return NULL;
+
+ memcpy(tioce_common, prom_bussoft, sizeof(struct tioce_common));
+ tioce_common->ce_pcibus.bs_base = (unsigned long)
+ ioremap(REGION_OFFSET(tioce_common->ce_pcibus.bs_base),
+ sizeof(struct tioce_common));
+
+ tioce_kern = tioce_kern_init(tioce_common);
+ if (tioce_kern == NULL) {
+ kfree(tioce_common);
+ return NULL;
+ }
+
+ /*
+ * Clear out any transient errors before registering the error
+ * interrupt handler.
+ */
+
+ tioce_mmr = (struct tioce __iomem *)tioce_common->ce_pcibus.bs_base;
+ tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_int_status_alias, ~0ULL);
+ tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_error_summary_alias,
+ ~0ULL);
+ tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_dre_comp_err_addr, 0ULL);
+
+ if (request_irq(SGI_PCIASIC_ERROR,
+ tioce_error_intr_handler,
+ IRQF_SHARED, "TIOCE error", (void *)tioce_common))
+ printk(KERN_WARNING
+ "%s: Unable to get irq %d. "
+ "Error interrupts won't be routed for "
+ "TIOCE bus %04x:%02x\n",
+ __func__, SGI_PCIASIC_ERROR,
+ tioce_common->ce_pcibus.bs_persist_segment,
+ tioce_common->ce_pcibus.bs_persist_busnum);
+
+ irq_set_handler(SGI_PCIASIC_ERROR, handle_level_irq);
+ sn_set_err_irq_affinity(SGI_PCIASIC_ERROR);
+ return tioce_common;
+}
+
+static struct sn_pcibus_provider tioce_pci_interfaces = {
+ .dma_map = tioce_dma,
+ .dma_map_consistent = tioce_dma_consistent,
+ .dma_unmap = tioce_dma_unmap,
+ .bus_fixup = tioce_bus_fixup,
+ .force_interrupt = tioce_force_interrupt,
+ .target_interrupt = tioce_target_interrupt
+};
+
+/**
+ * tioce_init_provider - init SN PCI provider ops for TIO CE
+ */
+int
+tioce_init_provider(void)
+{
+ sn_pci_provider[PCIIO_ASIC_TYPE_TIOCE] = &tioce_pci_interfaces;
+ return 0;
+}