diff options
Diffstat (limited to 'kernel/arch/arm/mach-orion5x/ts78xx-setup.c')
-rw-r--r-- | kernel/arch/arm/mach-orion5x/ts78xx-setup.c | 624 |
1 files changed, 624 insertions, 0 deletions
diff --git a/kernel/arch/arm/mach-orion5x/ts78xx-setup.c b/kernel/arch/arm/mach-orion5x/ts78xx-setup.c new file mode 100644 index 000000000..1b704d35c --- /dev/null +++ b/kernel/arch/arm/mach-orion5x/ts78xx-setup.c @@ -0,0 +1,624 @@ +/* + * arch/arm/mach-orion5x/ts78xx-setup.c + * + * Maintainer: Alexander Clouter <alex@digriz.org.uk> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sysfs.h> +#include <linux/platform_device.h> +#include <linux/mv643xx_eth.h> +#include <linux/ata_platform.h> +#include <linux/m48t86.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/timeriomem-rng.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <mach/orion5x.h> +#include "common.h" +#include "mpp.h" +#include "ts78xx-fpga.h" + +/***************************************************************************** + * TS-78xx Info + ****************************************************************************/ + +/* + * FPGA - lives where the PCI bus would be at ORION5X_PCI_MEM_PHYS_BASE + */ +#define TS78XX_FPGA_REGS_PHYS_BASE 0xe8000000 +#define TS78XX_FPGA_REGS_VIRT_BASE IOMEM(0xff900000) +#define TS78XX_FPGA_REGS_SIZE SZ_1M + +static struct ts78xx_fpga_data ts78xx_fpga = { + .id = 0, + .state = 1, +/* .supports = ... - populated by ts78xx_fpga_supports() */ +}; + +/***************************************************************************** + * I/O Address Mapping + ****************************************************************************/ +static struct map_desc ts78xx_io_desc[] __initdata = { + { + .virtual = (unsigned long)TS78XX_FPGA_REGS_VIRT_BASE, + .pfn = __phys_to_pfn(TS78XX_FPGA_REGS_PHYS_BASE), + .length = TS78XX_FPGA_REGS_SIZE, + .type = MT_DEVICE, + }, +}; + +static void __init ts78xx_map_io(void) +{ + orion5x_map_io(); + iotable_init(ts78xx_io_desc, ARRAY_SIZE(ts78xx_io_desc)); +} + +/***************************************************************************** + * Ethernet + ****************************************************************************/ +static struct mv643xx_eth_platform_data ts78xx_eth_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +/***************************************************************************** + * SATA + ****************************************************************************/ +static struct mv_sata_platform_data ts78xx_sata_data = { + .n_ports = 2, +}; + +/***************************************************************************** + * RTC M48T86 - nicked^Wborrowed from arch/arm/mach-ep93xx/ts72xx.c + ****************************************************************************/ +#define TS_RTC_CTRL (TS78XX_FPGA_REGS_VIRT_BASE + 0x808) +#define TS_RTC_DATA (TS78XX_FPGA_REGS_VIRT_BASE + 0x80c) + +static unsigned char ts78xx_ts_rtc_readbyte(unsigned long addr) +{ + writeb(addr, TS_RTC_CTRL); + return readb(TS_RTC_DATA); +} + +static void ts78xx_ts_rtc_writebyte(unsigned char value, unsigned long addr) +{ + writeb(addr, TS_RTC_CTRL); + writeb(value, TS_RTC_DATA); +} + +static struct m48t86_ops ts78xx_ts_rtc_ops = { + .readbyte = ts78xx_ts_rtc_readbyte, + .writebyte = ts78xx_ts_rtc_writebyte, +}; + +static struct platform_device ts78xx_ts_rtc_device = { + .name = "rtc-m48t86", + .id = -1, + .dev = { + .platform_data = &ts78xx_ts_rtc_ops, + }, + .num_resources = 0, +}; + +/* + * TS uses some of the user storage space on the RTC chip so see if it is + * present; as it's an optional feature at purchase time and not all boards + * will have it present + * + * I've used the method TS use in their rtc7800.c example for the detection + * + * TODO: track down a guinea pig without an RTC to see if we can work out a + * better RTC detection routine + */ +static int ts78xx_ts_rtc_load(void) +{ + int rc; + unsigned char tmp_rtc0, tmp_rtc1; + + tmp_rtc0 = ts78xx_ts_rtc_readbyte(126); + tmp_rtc1 = ts78xx_ts_rtc_readbyte(127); + + ts78xx_ts_rtc_writebyte(0x00, 126); + ts78xx_ts_rtc_writebyte(0x55, 127); + if (ts78xx_ts_rtc_readbyte(127) == 0x55) { + ts78xx_ts_rtc_writebyte(0xaa, 127); + if (ts78xx_ts_rtc_readbyte(127) == 0xaa + && ts78xx_ts_rtc_readbyte(126) == 0x00) { + ts78xx_ts_rtc_writebyte(tmp_rtc0, 126); + ts78xx_ts_rtc_writebyte(tmp_rtc1, 127); + + if (ts78xx_fpga.supports.ts_rtc.init == 0) { + rc = platform_device_register(&ts78xx_ts_rtc_device); + if (!rc) + ts78xx_fpga.supports.ts_rtc.init = 1; + } else + rc = platform_device_add(&ts78xx_ts_rtc_device); + + if (rc) + pr_info("RTC could not be registered: %d\n", + rc); + return rc; + } + } + + pr_info("RTC not found\n"); + return -ENODEV; +}; + +static void ts78xx_ts_rtc_unload(void) +{ + platform_device_del(&ts78xx_ts_rtc_device); +} + +/***************************************************************************** + * NAND Flash + ****************************************************************************/ +#define TS_NAND_CTRL (TS78XX_FPGA_REGS_VIRT_BASE + 0x800) /* VIRT */ +#define TS_NAND_DATA (TS78XX_FPGA_REGS_PHYS_BASE + 0x804) /* PHYS */ + +/* + * hardware specific access to control-lines + * + * ctrl: + * NAND_NCE: bit 0 -> bit 2 + * NAND_CLE: bit 1 -> bit 1 + * NAND_ALE: bit 2 -> bit 0 + */ +static void ts78xx_ts_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + unsigned char bits; + + bits = (ctrl & NAND_NCE) << 2; + bits |= ctrl & NAND_CLE; + bits |= (ctrl & NAND_ALE) >> 2; + + writeb((readb(TS_NAND_CTRL) & ~0x7) | bits, TS_NAND_CTRL); + } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W); +} + +static int ts78xx_ts_nand_dev_ready(struct mtd_info *mtd) +{ + return readb(TS_NAND_CTRL) & 0x20; +} + +static void ts78xx_ts_nand_write_buf(struct mtd_info *mtd, + const uint8_t *buf, int len) +{ + struct nand_chip *chip = mtd->priv; + void __iomem *io_base = chip->IO_ADDR_W; + unsigned long off = ((unsigned long)buf & 3); + int sz; + + if (off) { + sz = min_t(int, 4 - off, len); + writesb(io_base, buf, sz); + buf += sz; + len -= sz; + } + + sz = len >> 2; + if (sz) { + u32 *buf32 = (u32 *)buf; + writesl(io_base, buf32, sz); + buf += sz << 2; + len -= sz << 2; + } + + if (len) + writesb(io_base, buf, len); +} + +static void ts78xx_ts_nand_read_buf(struct mtd_info *mtd, + uint8_t *buf, int len) +{ + struct nand_chip *chip = mtd->priv; + void __iomem *io_base = chip->IO_ADDR_R; + unsigned long off = ((unsigned long)buf & 3); + int sz; + + if (off) { + sz = min_t(int, 4 - off, len); + readsb(io_base, buf, sz); + buf += sz; + len -= sz; + } + + sz = len >> 2; + if (sz) { + u32 *buf32 = (u32 *)buf; + readsl(io_base, buf32, sz); + buf += sz << 2; + len -= sz << 2; + } + + if (len) + readsb(io_base, buf, len); +} + +static struct mtd_partition ts78xx_ts_nand_parts[] = { + { + .name = "mbr", + .offset = 0, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + }, { + .name = "initrd", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + }, { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct platform_nand_data ts78xx_ts_nand_data = { + .chip = { + .nr_chips = 1, + .partitions = ts78xx_ts_nand_parts, + .nr_partitions = ARRAY_SIZE(ts78xx_ts_nand_parts), + .chip_delay = 15, + .bbt_options = NAND_BBT_USE_FLASH, + }, + .ctrl = { + /* + * The HW ECC offloading functions, used to give about a 9% + * performance increase for 'dd if=/dev/mtdblockX' and 5% for + * nanddump. This all however was changed by git commit + * e6cf5df1838c28bb060ac45b5585e48e71bbc740 so now there is + * no performance advantage to be had so we no longer bother + */ + .cmd_ctrl = ts78xx_ts_nand_cmd_ctrl, + .dev_ready = ts78xx_ts_nand_dev_ready, + .write_buf = ts78xx_ts_nand_write_buf, + .read_buf = ts78xx_ts_nand_read_buf, + }, +}; + +static struct resource ts78xx_ts_nand_resources + = DEFINE_RES_MEM(TS_NAND_DATA, 4); + +static struct platform_device ts78xx_ts_nand_device = { + .name = "gen_nand", + .id = -1, + .dev = { + .platform_data = &ts78xx_ts_nand_data, + }, + .resource = &ts78xx_ts_nand_resources, + .num_resources = 1, +}; + +static int ts78xx_ts_nand_load(void) +{ + int rc; + + if (ts78xx_fpga.supports.ts_nand.init == 0) { + rc = platform_device_register(&ts78xx_ts_nand_device); + if (!rc) + ts78xx_fpga.supports.ts_nand.init = 1; + } else + rc = platform_device_add(&ts78xx_ts_nand_device); + + if (rc) + pr_info("NAND could not be registered: %d\n", rc); + return rc; +}; + +static void ts78xx_ts_nand_unload(void) +{ + platform_device_del(&ts78xx_ts_nand_device); +} + +/***************************************************************************** + * HW RNG + ****************************************************************************/ +#define TS_RNG_DATA (TS78XX_FPGA_REGS_PHYS_BASE | 0x044) + +static struct resource ts78xx_ts_rng_resource + = DEFINE_RES_MEM(TS_RNG_DATA, 4); + +static struct timeriomem_rng_data ts78xx_ts_rng_data = { + .period = 1000000, /* one second */ +}; + +static struct platform_device ts78xx_ts_rng_device = { + .name = "timeriomem_rng", + .id = -1, + .dev = { + .platform_data = &ts78xx_ts_rng_data, + }, + .resource = &ts78xx_ts_rng_resource, + .num_resources = 1, +}; + +static int ts78xx_ts_rng_load(void) +{ + int rc; + + if (ts78xx_fpga.supports.ts_rng.init == 0) { + rc = platform_device_register(&ts78xx_ts_rng_device); + if (!rc) + ts78xx_fpga.supports.ts_rng.init = 1; + } else + rc = platform_device_add(&ts78xx_ts_rng_device); + + if (rc) + pr_info("RNG could not be registered: %d\n", rc); + return rc; +}; + +static void ts78xx_ts_rng_unload(void) +{ + platform_device_del(&ts78xx_ts_rng_device); +} + +/***************************************************************************** + * FPGA 'hotplug' support code + ****************************************************************************/ +static void ts78xx_fpga_devices_zero_init(void) +{ + ts78xx_fpga.supports.ts_rtc.init = 0; + ts78xx_fpga.supports.ts_nand.init = 0; + ts78xx_fpga.supports.ts_rng.init = 0; +} + +static void ts78xx_fpga_supports(void) +{ + /* TODO: put this 'table' into ts78xx-fpga.h */ + switch (ts78xx_fpga.id) { + case TS7800_REV_1: + case TS7800_REV_2: + case TS7800_REV_3: + case TS7800_REV_4: + case TS7800_REV_5: + case TS7800_REV_6: + case TS7800_REV_7: + case TS7800_REV_8: + case TS7800_REV_9: + ts78xx_fpga.supports.ts_rtc.present = 1; + ts78xx_fpga.supports.ts_nand.present = 1; + ts78xx_fpga.supports.ts_rng.present = 1; + break; + default: + /* enable devices if magic matches */ + switch ((ts78xx_fpga.id >> 8) & 0xffffff) { + case TS7800_FPGA_MAGIC: + pr_warn("unrecognised FPGA revision 0x%.2x\n", + ts78xx_fpga.id & 0xff); + ts78xx_fpga.supports.ts_rtc.present = 1; + ts78xx_fpga.supports.ts_nand.present = 1; + ts78xx_fpga.supports.ts_rng.present = 1; + break; + default: + ts78xx_fpga.supports.ts_rtc.present = 0; + ts78xx_fpga.supports.ts_nand.present = 0; + ts78xx_fpga.supports.ts_rng.present = 0; + } + } +} + +static int ts78xx_fpga_load_devices(void) +{ + int tmp, ret = 0; + + if (ts78xx_fpga.supports.ts_rtc.present == 1) { + tmp = ts78xx_ts_rtc_load(); + if (tmp) + ts78xx_fpga.supports.ts_rtc.present = 0; + ret |= tmp; + } + if (ts78xx_fpga.supports.ts_nand.present == 1) { + tmp = ts78xx_ts_nand_load(); + if (tmp) + ts78xx_fpga.supports.ts_nand.present = 0; + ret |= tmp; + } + if (ts78xx_fpga.supports.ts_rng.present == 1) { + tmp = ts78xx_ts_rng_load(); + if (tmp) + ts78xx_fpga.supports.ts_rng.present = 0; + ret |= tmp; + } + + return ret; +} + +static int ts78xx_fpga_unload_devices(void) +{ + int ret = 0; + + if (ts78xx_fpga.supports.ts_rtc.present == 1) + ts78xx_ts_rtc_unload(); + if (ts78xx_fpga.supports.ts_nand.present == 1) + ts78xx_ts_nand_unload(); + if (ts78xx_fpga.supports.ts_rng.present == 1) + ts78xx_ts_rng_unload(); + + return ret; +} + +static int ts78xx_fpga_load(void) +{ + ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE); + + pr_info("FPGA magic=0x%.6x, rev=0x%.2x\n", + (ts78xx_fpga.id >> 8) & 0xffffff, + ts78xx_fpga.id & 0xff); + + ts78xx_fpga_supports(); + + if (ts78xx_fpga_load_devices()) { + ts78xx_fpga.state = -1; + return -EBUSY; + } + + return 0; +}; + +static int ts78xx_fpga_unload(void) +{ + unsigned int fpga_id; + + fpga_id = readl(TS78XX_FPGA_REGS_VIRT_BASE); + + /* + * There does not seem to be a feasible way to block access to the GPIO + * pins from userspace (/dev/mem). This if clause should hopefully warn + * those foolish enough not to follow 'policy' :) + * + * UrJTAG SVN since r1381 can be used to reprogram the FPGA + */ + if (ts78xx_fpga.id != fpga_id) { + pr_err("FPGA magic/rev mismatch\n" + "TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n", + (ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff, + (fpga_id >> 8) & 0xffffff, fpga_id & 0xff); + ts78xx_fpga.state = -1; + return -EBUSY; + } + + if (ts78xx_fpga_unload_devices()) { + ts78xx_fpga.state = -1; + return -EBUSY; + } + + return 0; +}; + +static ssize_t ts78xx_fpga_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + if (ts78xx_fpga.state < 0) + return sprintf(buf, "borked\n"); + + return sprintf(buf, "%s\n", (ts78xx_fpga.state) ? "online" : "offline"); +} + +static ssize_t ts78xx_fpga_store(struct kobject *kobj, + struct kobj_attribute *attr, const char *buf, size_t n) +{ + int value, ret; + + if (ts78xx_fpga.state < 0) { + pr_err("FPGA borked, you must powercycle ASAP\n"); + return -EBUSY; + } + + if (strncmp(buf, "online", sizeof("online") - 1) == 0) + value = 1; + else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0) + value = 0; + else + return -EINVAL; + + if (ts78xx_fpga.state == value) + return n; + + ret = (ts78xx_fpga.state == 0) + ? ts78xx_fpga_load() + : ts78xx_fpga_unload(); + + if (!(ret < 0)) + ts78xx_fpga.state = value; + + return n; +} + +static struct kobj_attribute ts78xx_fpga_attr = + __ATTR(ts78xx_fpga, 0644, ts78xx_fpga_show, ts78xx_fpga_store); + +/***************************************************************************** + * General Setup + ****************************************************************************/ +static unsigned int ts78xx_mpp_modes[] __initdata = { + MPP0_UNUSED, + MPP1_GPIO, /* JTAG Clock */ + MPP2_GPIO, /* JTAG Data In */ + MPP3_GPIO, /* Lat ECP2 256 FPGA - PB2B */ + MPP4_GPIO, /* JTAG Data Out */ + MPP5_GPIO, /* JTAG TMS */ + MPP6_GPIO, /* Lat ECP2 256 FPGA - PB31A_CLK4+ */ + MPP7_GPIO, /* Lat ECP2 256 FPGA - PB22B */ + MPP8_UNUSED, + MPP9_UNUSED, + MPP10_UNUSED, + MPP11_UNUSED, + MPP12_UNUSED, + MPP13_UNUSED, + MPP14_UNUSED, + MPP15_UNUSED, + MPP16_UART, + MPP17_UART, + MPP18_UART, + MPP19_UART, + /* + * MPP[20] PCI Clock Out 1 + * MPP[21] PCI Clock Out 0 + * MPP[22] Unused + * MPP[23] Unused + * MPP[24] Unused + * MPP[25] Unused + */ + 0, +}; + +static void __init ts78xx_init(void) +{ + int ret; + + /* + * Setup basic Orion functions. Need to be called early. + */ + orion5x_init(); + + orion5x_mpp_conf(ts78xx_mpp_modes); + + /* + * Configure peripherals. + */ + orion5x_ehci0_init(); + orion5x_ehci1_init(); + orion5x_eth_init(&ts78xx_eth_data); + orion5x_sata_init(&ts78xx_sata_data); + orion5x_uart0_init(); + orion5x_uart1_init(); + orion5x_xor_init(); + + /* FPGA init */ + ts78xx_fpga_devices_zero_init(); + ret = ts78xx_fpga_load(); + ret = sysfs_create_file(firmware_kobj, &ts78xx_fpga_attr.attr); + if (ret) + pr_err("sysfs_create_file failed: %d\n", ret); +} + +MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC") + /* Maintainer: Alexander Clouter <alex@digriz.org.uk> */ + .atag_offset = 0x100, + .init_machine = ts78xx_init, + .map_io = ts78xx_map_io, + .init_early = orion5x_init_early, + .init_irq = orion5x_init_irq, + .init_time = orion5x_timer_init, + .restart = orion5x_restart, +MACHINE_END |