summaryrefslogtreecommitdiffstats
path: root/kernel/arch/arm/mach-iop32x/iq31244.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/arm/mach-iop32x/iq31244.c')
-rw-r--r--kernel/arch/arm/mach-iop32x/iq31244.c333
1 files changed, 333 insertions, 0 deletions
diff --git a/kernel/arch/arm/mach-iop32x/iq31244.c b/kernel/arch/arm/mach-iop32x/iq31244.c
new file mode 100644
index 000000000..0e1392b20
--- /dev/null
+++ b/kernel/arch/arm/mach-iop32x/iq31244.c
@@ -0,0 +1,333 @@
+/*
+ * arch/arm/mach-iop32x/iq31244.c
+ *
+ * Board support code for the Intel EP80219 and IQ31244 platforms.
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ * Copyright 2003 (c) MontaVista, Software, Inc.
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
+#include <linux/string.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <asm/cputype.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <mach/time.h>
+#include "gpio-iop32x.h"
+
+/*
+ * Until March of 2007 iq31244 platforms and ep80219 platforms shared the
+ * same machine id, and the processor type was used to select board type.
+ * However this assumption breaks for an iq80219 board which is an iop219
+ * processor on an iq31244 board. The force_ep80219 flag has been added
+ * for old boot loaders using the iq31244 machine id for an ep80219 platform.
+ */
+static int force_ep80219;
+
+static int is_80219(void)
+{
+ return !!((read_cpuid_id() & 0xffffffe0) == 0x69052e20);
+}
+
+static int is_ep80219(void)
+{
+ if (machine_is_ep80219() || force_ep80219)
+ return 1;
+ else
+ return 0;
+}
+
+
+/*
+ * EP80219/IQ31244 timer tick configuration.
+ */
+static void __init iq31244_timer_init(void)
+{
+ if (is_ep80219()) {
+ /* 33.333 MHz crystal. */
+ iop_init_time(200000000);
+ } else {
+ /* 33.000 MHz crystal. */
+ iop_init_time(198000000);
+ }
+}
+
+
+/*
+ * IQ31244 I/O.
+ */
+static struct map_desc iq31244_io_desc[] __initdata = {
+ { /* on-board devices */
+ .virtual = IQ31244_UART,
+ .pfn = __phys_to_pfn(IQ31244_UART),
+ .length = 0x00100000,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init iq31244_map_io(void)
+{
+ iop3xx_map_io();
+ iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc));
+}
+
+
+/*
+ * EP80219/IQ31244 PCI.
+ */
+static int __init
+ep80219_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ if (slot == 0) {
+ /* CFlash */
+ irq = IRQ_IOP32X_XINT1;
+ } else if (slot == 1) {
+ /* 82551 Pro 100 */
+ irq = IRQ_IOP32X_XINT0;
+ } else if (slot == 2) {
+ /* PCI-X Slot */
+ irq = IRQ_IOP32X_XINT3;
+ } else if (slot == 3) {
+ /* SATA */
+ irq = IRQ_IOP32X_XINT2;
+ } else {
+ printk(KERN_ERR "ep80219_pci_map_irq() called for unknown "
+ "device PCI:%d:%d:%d\n", dev->bus->number,
+ PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+ irq = -1;
+ }
+
+ return irq;
+}
+
+static struct hw_pci ep80219_pci __initdata = {
+ .nr_controllers = 1,
+ .ops = &iop3xx_ops,
+ .setup = iop3xx_pci_setup,
+ .preinit = iop3xx_pci_preinit,
+ .map_irq = ep80219_pci_map_irq,
+};
+
+static int __init
+iq31244_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ if (slot == 0) {
+ /* CFlash */
+ irq = IRQ_IOP32X_XINT1;
+ } else if (slot == 1) {
+ /* SATA */
+ irq = IRQ_IOP32X_XINT2;
+ } else if (slot == 2) {
+ /* PCI-X Slot */
+ irq = IRQ_IOP32X_XINT3;
+ } else if (slot == 3) {
+ /* 82546 GigE */
+ irq = IRQ_IOP32X_XINT0;
+ } else {
+ printk(KERN_ERR "iq31244_pci_map_irq called for unknown "
+ "device PCI:%d:%d:%d\n", dev->bus->number,
+ PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+ irq = -1;
+ }
+
+ return irq;
+}
+
+static struct hw_pci iq31244_pci __initdata = {
+ .nr_controllers = 1,
+ .ops = &iop3xx_ops,
+ .setup = iop3xx_pci_setup,
+ .preinit = iop3xx_pci_preinit,
+ .map_irq = iq31244_pci_map_irq,
+};
+
+static int __init iq31244_pci_init(void)
+{
+ if (is_ep80219())
+ pci_common_init(&ep80219_pci);
+ else if (machine_is_iq31244()) {
+ if (is_80219()) {
+ printk("note: iq31244 board type has been selected\n");
+ printk("note: to select ep80219 operation:\n");
+ printk("\t1/ specify \"force_ep80219\" on the kernel"
+ " command line\n");
+ printk("\t2/ update boot loader to pass"
+ " the ep80219 id: %d\n", MACH_TYPE_EP80219);
+ }
+ pci_common_init(&iq31244_pci);
+ }
+
+ return 0;
+}
+
+subsys_initcall(iq31244_pci_init);
+
+
+/*
+ * IQ31244 machine initialisation.
+ */
+static struct physmap_flash_data iq31244_flash_data = {
+ .width = 2,
+};
+
+static struct resource iq31244_flash_resource = {
+ .start = 0xf0000000,
+ .end = 0xf07fffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device iq31244_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &iq31244_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &iq31244_flash_resource,
+};
+
+static struct plat_serial8250_port iq31244_serial_port[] = {
+ {
+ .mapbase = IQ31244_UART,
+ .membase = (char *)IQ31244_UART,
+ .irq = IRQ_IOP32X_XINT1,
+ .flags = UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 0,
+ .uartclk = 1843200,
+ },
+ { },
+};
+
+static struct resource iq31244_uart_resource = {
+ .start = IQ31244_UART,
+ .end = IQ31244_UART + 7,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device iq31244_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = iq31244_serial_port,
+ },
+ .num_resources = 1,
+ .resource = &iq31244_uart_resource,
+};
+
+/*
+ * This function will send a SHUTDOWN_COMPLETE message to the PIC
+ * controller over I2C. We are not using the i2c subsystem since
+ * we are going to power off and it may be removed
+ */
+void ep80219_power_off(void)
+{
+ /*
+ * Send the Address byte w/ the start condition
+ */
+ *IOP3XX_IDBR1 = 0x60;
+ *IOP3XX_ICR1 = 0xE9;
+ mdelay(1);
+
+ /*
+ * Send the START_MSG byte w/ no start or stop condition
+ */
+ *IOP3XX_IDBR1 = 0x0F;
+ *IOP3XX_ICR1 = 0xE8;
+ mdelay(1);
+
+ /*
+ * Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or
+ * stop condition
+ */
+ *IOP3XX_IDBR1 = 0x03;
+ *IOP3XX_ICR1 = 0xE8;
+ mdelay(1);
+
+ /*
+ * Send an ignored byte w/ stop condition
+ */
+ *IOP3XX_IDBR1 = 0x00;
+ *IOP3XX_ICR1 = 0xEA;
+
+ while (1)
+ ;
+}
+
+static void __init iq31244_init_machine(void)
+{
+ register_iop32x_gpio();
+ platform_device_register(&iop3xx_i2c0_device);
+ platform_device_register(&iop3xx_i2c1_device);
+ platform_device_register(&iq31244_flash_device);
+ platform_device_register(&iq31244_serial_device);
+ platform_device_register(&iop3xx_dma_0_channel);
+ platform_device_register(&iop3xx_dma_1_channel);
+
+ if (is_ep80219())
+ pm_power_off = ep80219_power_off;
+
+ if (!is_80219())
+ platform_device_register(&iop3xx_aau_channel);
+}
+
+static int __init force_ep80219_setup(char *str)
+{
+ force_ep80219 = 1;
+ return 1;
+}
+
+__setup("force_ep80219", force_ep80219_setup);
+
+MACHINE_START(IQ31244, "Intel IQ31244")
+ /* Maintainer: Intel Corp. */
+ .atag_offset = 0x100,
+ .map_io = iq31244_map_io,
+ .init_irq = iop32x_init_irq,
+ .init_time = iq31244_timer_init,
+ .init_machine = iq31244_init_machine,
+ .restart = iop3xx_restart,
+MACHINE_END
+
+/* There should have been an ep80219 machine identifier from the beginning.
+ * Boot roms older than March 2007 do not know the ep80219 machine id. Pass
+ * "force_ep80219" on the kernel command line, otherwise iq31244 operation
+ * will be selected.
+ */
+MACHINE_START(EP80219, "Intel EP80219")
+ /* Maintainer: Intel Corp. */
+ .atag_offset = 0x100,
+ .map_io = iq31244_map_io,
+ .init_irq = iop32x_init_irq,
+ .init_time = iq31244_timer_init,
+ .init_machine = iq31244_init_machine,
+ .restart = iop3xx_restart,
+MACHINE_END