1 files changed, 0 insertions, 43 deletions
diff --git a/kernel/Documentation/devicetree/bindings/video/sharp,ls037v7dw01.txt b/kernel/Documentation/devicetree/bindings/video/sharp,ls037v7dw01.txt
deleted file mode 100644
index 0cc8981e9..000000000
--- a/kernel/Documentation/devicetree/bindings/video/sharp,ls037v7dw01.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-SHARP LS037V7DW01 TFT-LCD panel
-===================================
-
-Required properties:
-- compatible: "sharp,ls037v7dw01"
-
-Optional properties:
-- label: a symbolic name for the panel
-- enable-gpios: a GPIO spec for the optional enable pin.
-  This pin is the INI pin as specified in the LS037V7DW01.pdf file.
-- reset-gpios: a GPIO spec for the optional reset pin.
-  This pin is the RESB pin as specified in the LS037V7DW01.pdf file.
-- mode-gpios: a GPIO
-  ordered MO, LR, and UD as specified in the LS037V7DW01.pdf file.
-
-Required nodes:
-- Video port for DPI input
-
-This panel can have zero to five GPIOs to configure to change configuration
-between QVGA and VGA mode and the scan direction. As these pins can be also
-configured with external pulls, all the GPIOs are considered optional with holes
-in the array.
-
-Example
--------
-
-Example when connected to a omap2+ based device:
-
-lcd0: display {
-	compatible = "sharp,ls037v7dw01";
-	power-supply = <&lcd_3v3>;
-	enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;	/* gpio152, lcd INI */
-	reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd RESB */
-	mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH	/* gpio154, lcd MO */
-		      &gpio1 2 GPIO_ACTIVE_HIGH		/* gpio2, lcd LR */
-		      &gpio1 3 GPIO_ACTIVE_HIGH>;	/* gpio3, lcd UD */
-
-	port {
-		lcd_in: endpoint {
-			remote-endpoint = <&dpi_out>;
-		};
-	};
-};