diff options
Diffstat (limited to 'kernel/Documentation/devicetree/bindings/pci')
15 files changed, 481 insertions, 13 deletions
diff --git a/kernel/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt b/kernel/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt new file mode 100644 index 000000000..09cd3bc4d --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt @@ -0,0 +1,28 @@ +* Altera PCIe MSI controller + +Required properties: +- compatible: should contain "altr,msi-1.0" +- reg: specifies the physical base address of the controller and + the length of the memory mapped region. +- reg-names: must include the following entries: + "csr": CSR registers + "vector_slave": vectors slave port region +- interrupt-parent: interrupt source phandle. +- interrupts: specifies the interrupt source of the parent interrupt + controller. The format of the interrupt specifier depends on the + parent interrupt controller. +- num-vectors: number of vectors, range 1 to 32. +- msi-controller: indicates that this is MSI controller node + + +Example +msi0: msi@0xFF200000 { + compatible = "altr,msi-1.0"; + reg = <0xFF200000 0x00000010 + 0xFF200010 0x00000080>; + reg-names = "csr", "vector_slave"; + interrupt-parent = <&hps_0_arm_gic_0>; + interrupts = <0 42 4>; + msi-controller; + num-vectors = <32>; +}; diff --git a/kernel/Documentation/devicetree/bindings/pci/altera-pcie.txt b/kernel/Documentation/devicetree/bindings/pci/altera-pcie.txt new file mode 100644 index 000000000..2951a6a50 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pci/altera-pcie.txt @@ -0,0 +1,49 @@ +* Altera PCIe controller + +Required properties: +- compatible : should contain "altr,pcie-root-port-1.0" +- reg: a list of physical base address and length for TXS and CRA. +- reg-names: must include the following entries: + "Txs": TX slave port region + "Cra": Control register access region +- interrupt-parent: interrupt source phandle. +- interrupts: specifies the interrupt source of the parent interrupt controller. + The format of the interrupt specifier depends on the parent interrupt + controller. +- device_type: must be "pci" +- #address-cells: set to <3> +- #size-cells: set to <2> +- #interrupt-cells: set to <1> +- ranges: describes the translation of addresses for root ports and standard + PCI regions. +- interrupt-map-mask and interrupt-map: standard PCI properties to define the + mapping of the PCIe interface to interrupt numbers. + +Optional properties: +- msi-parent: Link to the hardware entity that serves as the MSI controller for this PCIe + controller. +- bus-range: PCI bus numbers covered + +Example + pcie_0: pcie@0xc00000000 { + compatible = "altr,pcie-root-port-1.0"; + reg = <0xc0000000 0x20000000>, + <0xff220000 0x00004000>; + reg-names = "Txs", "Cra"; + interrupt-parent = <&hps_0_arm_gic_0>; + interrupts = <0 40 4>; + interrupt-controller; + #interrupt-cells = <1>; + bus-range = <0x0 0xFF>; + device_type = "pci"; + msi-parent = <&msi_to_gic_gen_0>; + #address-cells = <3>; + #size-cells = <2>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_0 1>, + <0 0 0 2 &pcie_0 2>, + <0 0 0 3 &pcie_0 3>, + <0 0 0 4 &pcie_0 4>; + ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000 + 0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>; + }; diff --git a/kernel/Documentation/devicetree/bindings/pci/arm,juno-r1-pcie.txt b/kernel/Documentation/devicetree/bindings/pci/arm,juno-r1-pcie.txt new file mode 100644 index 000000000..f7514c170 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pci/arm,juno-r1-pcie.txt @@ -0,0 +1,10 @@ +* ARM Juno R1 PCIe interface + +This PCIe host controller is based on PLDA XpressRICH3-AXI IP +and thus inherits all the common properties defined in plda,xpressrich3-axi.txt +as well as the base properties defined in host-generic-pci.txt. + +Required properties: + - compatible: "arm,juno-r1-pcie" + - dma-coherent: The host controller bridges the AXI transactions into PCIe bus + in a manner that makes the DMA operations to appear coherent to the CPUs. diff --git a/kernel/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/kernel/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt index f7ce50e38..45c2a8094 100644 --- a/kernel/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt +++ b/kernel/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt @@ -17,6 +17,21 @@ Optional properties: - phys: phandle of the PCIe PHY device - phy-names: must be "pcie-phy" +- brcm,pcie-ob: Some iProc SoCs do not have the outbound address mapping done +by the ASIC after power on reset. In this case, SW needs to configure it + +If the brcm,pcie-ob property is present, the following properties become +effective: + +Required: +- brcm,pcie-ob-axi-offset: The offset from the AXI address to the internal +address used by the iProc PCIe core (not the PCIe address) +- brcm,pcie-ob-window-size: The outbound address mapping window size (in MB) + +Optional: +- brcm,pcie-ob-oarr-size: Some iProc SoCs need the OARR size bit to be set to +increase the outbound window size + Example: pcie0: pcie@18012000 { compatible = "brcm,iproc-pcie"; @@ -38,6 +53,11 @@ Example: phys = <&phy 0 5>; phy-names = "pcie-phy"; + + brcm,pcie-ob; + brcm,pcie-ob-oarr-size; + brcm,pcie-ob-axi-offset = <0x00000000>; + brcm,pcie-ob-window-size = <256>; }; pcie1: pcie@18013000 { diff --git a/kernel/Documentation/devicetree/bindings/pci/designware-pcie.txt b/kernel/Documentation/devicetree/bindings/pci/designware-pcie.txt index 9f4faa8e8..5b0853df9 100644 --- a/kernel/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/kernel/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -15,14 +15,16 @@ Required properties: to define the mapping of the PCIe interface to interrupt numbers. - num-lanes: number of lanes to use -- clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - "pcie" - - "pcie_bus" Optional properties: +- num-lanes: number of lanes to use (this property should be specified unless + the link is brought already up in BIOS) - reset-gpio: gpio pin number of power good signal - bus-range: PCI bus numbers covered (it is recommended for new devicetrees to specify this property, to keep backwards compatibility a range of 0x00-0xff is assumed if not present) +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - "pcie" + - "pcie_bus" diff --git a/kernel/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/kernel/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt new file mode 100644 index 000000000..17c6ed9c6 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt @@ -0,0 +1,44 @@ +HiSilicon PCIe host bridge DT description + +HiSilicon PCIe host controller is based on Designware PCI core. +It shares common functions with PCIe Designware core driver and inherits +common properties defined in +Documentation/devicetree/bindings/pci/designware-pci.txt. + +Additional properties are described here: + +Required properties: +- compatible: Should contain "hisilicon,hip05-pcie". +- reg: Should contain rc_dbi, config registers location and length. +- reg-names: Must include the following entries: + "rc_dbi": controller configuration registers; + "config": PCIe configuration space registers. +- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts. +- port-id: Should be 0, 1, 2 or 3. + +Optional properties: +- status: Either "ok" or "disabled". +- dma-coherent: Present if DMA operations are coherent. + +Example: + pcie@0xb0080000 { + compatible = "hisilicon,hip05-pcie", "snps,dw-pcie"; + reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>; + reg-names = "rc_dbi", "config"; + bus-range = <0 15>; + msi-parent = <&its_pcie>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + ranges = <0x82000000 0 0x00000000 0x220 0x00000000 0 0x10000000>; + num-lanes = <8>; + port-id = <1>; + #interrupts-cells = <1>; + interrupts-map-mask = <0xf800 0 0 7>; + interrupts-map = <0x0 0 0 1 &mbigen_pcie 1 10 + 0x0 0 0 2 &mbigen_pcie 2 11 + 0x0 0 0 3 &mbigen_pcie 3 12 + 0x0 0 0 4 &mbigen_pcie 4 13>; + status = "ok"; + }; diff --git a/kernel/Documentation/devicetree/bindings/pci/host-generic-pci.txt b/kernel/Documentation/devicetree/bindings/pci/host-generic-pci.txt index cf3e205e0..3f1d3fca6 100644 --- a/kernel/Documentation/devicetree/bindings/pci/host-generic-pci.txt +++ b/kernel/Documentation/devicetree/bindings/pci/host-generic-pci.txt @@ -34,8 +34,9 @@ Properties of the host controller node: - #size-cells : Must be 2. - reg : The Configuration Space base address and size, as accessed - from the parent bus. - + from the parent bus. The base address corresponds to + the first bus in the "bus-range" property. If no + "bus-range" is specified, this will be bus 0 (the default). Properties of the /chosen node: diff --git a/kernel/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/kernel/Documentation/devicetree/bindings/pci/layerscape-pci.txt index 6286f049b..e3767857d 100644 --- a/kernel/Documentation/devicetree/bindings/pci/layerscape-pci.txt +++ b/kernel/Documentation/devicetree/bindings/pci/layerscape-pci.txt @@ -1,10 +1,20 @@ Freescale Layerscape PCIe controller -This PCIe host controller is based on the Synopsis Designware PCIe IP +This PCIe host controller is based on the Synopsys DesignWare PCIe IP and thus inherits all the common properties defined in designware-pcie.txt. +This controller derives its clocks from the Reset Configuration Word (RCW) +which is used to describe the PLL settings at the time of chip-reset. + +Also as per the available Reference Manuals, there is no specific 'version' +register available in the Freescale PCIe controller register set, +which can allow determining the underlying DesignWare PCIe controller version +information. + Required properties: -- compatible: should contain the platform identifier such as "fsl,ls1021a-pcie" +- compatible: should contain the platform identifier such as: + "fsl,ls1021a-pcie", "snps,dw-pcie" + "fsl,ls2080a-pcie", "snps,dw-pcie" - reg: base addresses and lengths of the PCIe controller - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. diff --git a/kernel/Documentation/devicetree/bindings/pci/pci-msi.txt b/kernel/Documentation/devicetree/bindings/pci/pci-msi.txt new file mode 100644 index 000000000..9b3cc817d --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pci/pci-msi.txt @@ -0,0 +1,220 @@ +This document describes the generic device tree binding for describing the +relationship between PCI devices and MSI controllers. + +Each PCI device under a root complex is uniquely identified by its Requester ID +(AKA RID). A Requester ID is a triplet of a Bus number, Device number, and +Function number. + +For the purpose of this document, when treated as a numeric value, a RID is +formatted such that: + +* Bits [15:8] are the Bus number. +* Bits [7:3] are the Device number. +* Bits [2:0] are the Function number. +* Any other bits required for padding must be zero. + +MSIs may be distinguished in part through the use of sideband data accompanying +writes. In the case of PCI devices, this sideband data may be derived from the +Requester ID. A mechanism is required to associate a device with both the MSI +controllers it can address, and the sideband data that will be associated with +its writes to those controllers. + +For generic MSI bindings, see +Documentation/devicetree/bindings/interrupt-controller/msi.txt. + + +PCI root complex +================ + +Optional properties +------------------- + +- msi-map: Maps a Requester ID to an MSI controller and associated + msi-specifier data. The property is an arbitrary number of tuples of + (rid-base,msi-controller,msi-base,length), where: + + * rid-base is a single cell describing the first RID matched by the entry. + + * msi-controller is a single phandle to an MSI controller + + * msi-base is an msi-specifier describing the msi-specifier produced for the + first RID matched by the entry. + + * length is a single cell describing how many consecutive RIDs are matched + following the rid-base. + + Any RID r in the interval [rid-base, rid-base + length) is associated with + the listed msi-controller, with the msi-specifier (r - rid-base + msi-base). + +- msi-map-mask: A mask to be applied to each Requester ID prior to being mapped + to an msi-specifier per the msi-map property. + +- msi-parent: Describes the MSI parent of the root complex itself. Where + the root complex and MSI controller do not pass sideband data with MSI + writes, this property may be used to describe the MSI controller(s) + used by PCI devices under the root complex, if defined as such in the + binding for the root complex. + + +Example (1) +=========== + +/ { + #address-cells = <1>; + #size-cells = <1>; + + msi: msi-controller@a { + reg = <0xa 0x1>; + compatible = "vendor,some-controller"; + msi-controller; + #msi-cells = <1>; + }; + + pci: pci@f { + reg = <0xf 0x1>; + compatible = "vendor,pcie-root-complex"; + device_type = "pci"; + + /* + * The sideband data provided to the MSI controller is + * the RID, identity-mapped. + */ + msi-map = <0x0 &msi_a 0x0 0x10000>, + }; +}; + + +Example (2) +=========== + +/ { + #address-cells = <1>; + #size-cells = <1>; + + msi: msi-controller@a { + reg = <0xa 0x1>; + compatible = "vendor,some-controller"; + msi-controller; + #msi-cells = <1>; + }; + + pci: pci@f { + reg = <0xf 0x1>; + compatible = "vendor,pcie-root-complex"; + device_type = "pci"; + + /* + * The sideband data provided to the MSI controller is + * the RID, masked to only the device and function bits. + */ + msi-map = <0x0 &msi_a 0x0 0x100>, + msi-map-mask = <0xff> + }; +}; + + +Example (3) +=========== + +/ { + #address-cells = <1>; + #size-cells = <1>; + + msi: msi-controller@a { + reg = <0xa 0x1>; + compatible = "vendor,some-controller"; + msi-controller; + #msi-cells = <1>; + }; + + pci: pci@f { + reg = <0xf 0x1>; + compatible = "vendor,pcie-root-complex"; + device_type = "pci"; + + /* + * The sideband data provided to the MSI controller is + * the RID, but the high bit of the bus number is + * ignored. + */ + msi-map = <0x0000 &msi 0x0000 0x8000>, + <0x8000 &msi 0x0000 0x8000>; + }; +}; + + +Example (4) +=========== + +/ { + #address-cells = <1>; + #size-cells = <1>; + + msi: msi-controller@a { + reg = <0xa 0x1>; + compatible = "vendor,some-controller"; + msi-controller; + #msi-cells = <1>; + }; + + pci: pci@f { + reg = <0xf 0x1>; + compatible = "vendor,pcie-root-complex"; + device_type = "pci"; + + /* + * The sideband data provided to the MSI controller is + * the RID, but the high bit of the bus number is + * negated. + */ + msi-map = <0x0000 &msi 0x8000 0x8000>, + <0x8000 &msi 0x0000 0x8000>; + }; +}; + + +Example (5) +=========== + +/ { + #address-cells = <1>; + #size-cells = <1>; + + msi_a: msi-controller@a { + reg = <0xa 0x1>; + compatible = "vendor,some-controller"; + msi-controller; + #msi-cells = <1>; + }; + + msi_b: msi-controller@b { + reg = <0xb 0x1>; + compatible = "vendor,some-controller"; + msi-controller; + #msi-cells = <1>; + }; + + msi_c: msi-controller@c { + reg = <0xc 0x1>; + compatible = "vendor,some-controller"; + msi-controller; + #msi-cells = <1>; + }; + + pci: pci@c { + reg = <0xf 0x1>; + compatible = "vendor,pcie-root-complex"; + device_type = "pci"; + + /* + * The sideband data provided to MSI controller a is the + * RID, but the high bit of the bus number is negated. + * The sideband data provided to MSI controller b is the + * RID, identity-mapped. + * MSI controller c is not addressable. + */ + msi-map = <0x0000 &msi_a 0x8000 0x08000>, + <0x8000 &msi_a 0x0000 0x08000>, + <0x0000 &msi_b 0x0000 0x10000>; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/kernel/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt index d8ef5bf50..7fab84b33 100644 --- a/kernel/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt +++ b/kernel/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt @@ -7,7 +7,8 @@ OHCI and EHCI controllers. Required properties: - compatible: "renesas,pci-r8a7790" for the R8A7790 SoC; - "renesas,pci-r8a7791" for the R8A7791 SoC. + "renesas,pci-r8a7791" for the R8A7791 SoC; + "renesas,pci-r8a7794" for the R8A7794 SoC. - reg: A list of physical regions to access the device: the first is the operational registers for the OHCI/EHCI controllers and the second is for the bridge configuration and control registers. diff --git a/kernel/Documentation/devicetree/bindings/pci/pci.txt b/kernel/Documentation/devicetree/bindings/pci/pci.txt index f8fbe9af7..08dcfad09 100644 --- a/kernel/Documentation/devicetree/bindings/pci/pci.txt +++ b/kernel/Documentation/devicetree/bindings/pci/pci.txt @@ -1,12 +1,12 @@ PCI bus bridges have standardized Device Tree bindings: PCI Bus Binding to: IEEE Std 1275-1994 -http://www.openfirmware.org/ofwg/bindings/pci/pci2_1.pdf +http://www.firmware.org/1275/bindings/pci/pci2_1.pdf And for the interrupt mapping part: Open Firmware Recommended Practice: Interrupt Mapping -http://www.openfirmware.org/1275/practice/imap/imap0_9d.pdf +http://www.firmware.org/1275/practice/imap/imap0_9d.pdf Additionally to the properties specified in the above standards a host bridge driver implementation may support the following properties: diff --git a/kernel/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi.txt b/kernel/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi.txt new file mode 100644 index 000000000..f3f75bfb4 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi.txt @@ -0,0 +1,12 @@ +* PLDA XpressRICH3-AXI host controller + +The PLDA XpressRICH3-AXI host controller can be configured in a manner that +makes it compliant with the SBSA[1] standard published by ARM Ltd. For those +scenarios, the host-generic-pci.txt bindings apply with the following additions +to the compatible property: + +Required properties: + - compatible: should contain "plda,xpressrich3-axi" to identify the IP used. + + +[1] http://infocenter.arm.com/help/topic/com.arm.doc.den0029a/ diff --git a/kernel/Documentation/devicetree/bindings/pci/ti-pci.txt b/kernel/Documentation/devicetree/bindings/pci/ti-pci.txt index 3d217911b..60e25161f 100644 --- a/kernel/Documentation/devicetree/bindings/pci/ti-pci.txt +++ b/kernel/Documentation/devicetree/bindings/pci/ti-pci.txt @@ -23,6 +23,9 @@ PCIe Designware Controller interrupt-map-mask, interrupt-map : as specified in ../designware-pcie.txt +Optional Property: + - gpios : Should be added if a gpio line is required to drive PERST# line + Example: axi { compatible = "simple-bus"; diff --git a/kernel/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt b/kernel/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt new file mode 100644 index 000000000..36d881c8e --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt @@ -0,0 +1,68 @@ +* AppliedMicro X-Gene v1 PCIe MSI controller + +Required properties: + +- compatible: should be "apm,xgene1-msi" to identify + X-Gene v1 PCIe MSI controller block. +- msi-controller: indicates that this is X-Gene v1 PCIe MSI controller node +- reg: physical base address (0x79000000) and length (0x900000) for controller + registers. These registers include the MSI termination address and data + registers as well as the MSI interrupt status registers. +- reg-names: not required +- interrupts: A list of 16 interrupt outputs of the controller, starting from + interrupt number 0x10 to 0x1f. +- interrupt-names: not required + +Each PCIe node needs to have property msi-parent that points to msi controller node + +Examples: + +SoC DTSI: + + + MSI node: + msi@79000000 { + compatible = "apm,xgene1-msi"; + msi-controller; + reg = <0x00 0x79000000 0x0 0x900000>; + interrupts = <0x0 0x10 0x4> + <0x0 0x11 0x4> + <0x0 0x12 0x4> + <0x0 0x13 0x4> + <0x0 0x14 0x4> + <0x0 0x15 0x4> + <0x0 0x16 0x4> + <0x0 0x17 0x4> + <0x0 0x18 0x4> + <0x0 0x19 0x4> + <0x0 0x1a 0x4> + <0x0 0x1b 0x4> + <0x0 0x1c 0x4> + <0x0 0x1d 0x4> + <0x0 0x1e 0x4> + <0x0 0x1f 0x4>; + }; + + + PCIe controller node with msi-parent property pointing to MSI node: + pcie0: pcie@1f2b0000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */ + 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */ + 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 + 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; + dma-coherent; + clocks = <&pcie0clk 0>; + msi-parent= <&msi>; + }; diff --git a/kernel/Documentation/devicetree/bindings/pci/xilinx-pcie.txt b/kernel/Documentation/devicetree/bindings/pci/xilinx-pcie.txt index 3e2c88d97..02f979a48 100644 --- a/kernel/Documentation/devicetree/bindings/pci/xilinx-pcie.txt +++ b/kernel/Documentation/devicetree/bindings/pci/xilinx-pcie.txt @@ -58,5 +58,5 @@ Example: interrupt-controller; #address-cells = <0>; #interrupt-cells = <1>; - } + }; }; |