summaryrefslogtreecommitdiffstats
path: root/kernel/Documentation/device-mapper/dm-raid.txt
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/Documentation/device-mapper/dm-raid.txt')
-rw-r--r--kernel/Documentation/device-mapper/dm-raid.txt33
1 files changed, 33 insertions, 0 deletions
diff --git a/kernel/Documentation/device-mapper/dm-raid.txt b/kernel/Documentation/device-mapper/dm-raid.txt
index ef8ba9fa5..df2d636b6 100644
--- a/kernel/Documentation/device-mapper/dm-raid.txt
+++ b/kernel/Documentation/device-mapper/dm-raid.txt
@@ -209,6 +209,37 @@ include:
"repair" - Initiate a repair of the array.
"reshape"- Currently unsupported (-EINVAL).
+
+Discard Support
+---------------
+The implementation of discard support among hardware vendors varies.
+When a block is discarded, some storage devices will return zeroes when
+the block is read. These devices set the 'discard_zeroes_data'
+attribute. Other devices will return random data. Confusingly, some
+devices that advertise 'discard_zeroes_data' will not reliably return
+zeroes when discarded blocks are read! Since RAID 4/5/6 uses blocks
+from a number of devices to calculate parity blocks and (for performance
+reasons) relies on 'discard_zeroes_data' being reliable, it is important
+that the devices be consistent. Blocks may be discarded in the middle
+of a RAID 4/5/6 stripe and if subsequent read results are not
+consistent, the parity blocks may be calculated differently at any time;
+making the parity blocks useless for redundancy. It is important to
+understand how your hardware behaves with discards if you are going to
+enable discards with RAID 4/5/6.
+
+Since the behavior of storage devices is unreliable in this respect,
+even when reporting 'discard_zeroes_data', by default RAID 4/5/6
+discard support is disabled -- this ensures data integrity at the
+expense of losing some performance.
+
+Storage devices that properly support 'discard_zeroes_data' are
+increasingly whitelisted in the kernel and can thus be trusted.
+
+For trusted devices, the following dm-raid module parameter can be set
+to safely enable discard support for RAID 4/5/6:
+ 'devices_handle_discards_safely'
+
+
Version History
---------------
1.0.0 Initial version. Support for RAID 4/5/6
@@ -224,3 +255,5 @@ Version History
New status (STATUSTYPE_INFO) fields: sync_action and mismatch_cnt.
1.5.1 Add ability to restore transiently failed devices on resume.
1.5.2 'mismatch_cnt' is zero unless [last_]sync_action is "check".
+1.6.0 Add discard support (and devices_handle_discard_safely module param).
+1.7.0 Add support for MD RAID0 mappings.