Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 261 deletions

diff --git a/qemu/roms/u-boot/tools/ublimage.c b/qemu/roms/u-boot/tools/ublimage.c
deleted file mode 100644
index cbbbe205d..000000000
--- a/qemu/roms/u-boot/tools/ublimage.c
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- * (C) Copyright 2011
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * Based on:
- * (C) Copyright 2009
- * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
- *
- * (C) Copyright 2008
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include "imagetool.h"
-#include <image.h>
-#include "ublimage.h"
-
-/*
- * Supported commands for configuration file
- */
-static table_entry_t ublimage_cmds[] = {
-	{CMD_BOOT_MODE,	"MODE",		"UBL special modes", },
-	{CMD_ENTRY,	"ENTRY",	"Entry point addr for bootloader", },
-	{CMD_PAGE,	"PAGES",
-		"number of pages (size of bootloader)", },
-	{CMD_ST_BLOCK,	"START_BLOCK",
-		"block number where bootloader is present", },
-	{CMD_ST_PAGE,	"START_PAGE",
-		"page number where bootloader is present", },
-	{CMD_LD_ADDR,	"LD_ADDR",
-		"load addr", },
-	{-1,		"",		"", },
-};
-
-/*
- * Supported Boot options for configuration file
- * this is needed to set the correct flash offset
- */
-static table_entry_t ublimage_bootops[] = {
-	{UBL_MAGIC_SAFE,	"safe",	"Safe boot mode",	},
-	{-1,			"",	"Invalid",		},
-};
-
-static struct ubl_header ublimage_header;
-
-static uint32_t get_cfg_value(char *token, char *name,  int linenr)
-{
-	char *endptr;
-	uint32_t value;
-
-	errno = 0;
-	value = strtoul(token, &endptr, 16);
-	if (errno || (token == endptr)) {
-		fprintf(stderr, "Error: %s[%d] - Invalid hex data(%s)\n",
-			name,  linenr, token);
-		exit(EXIT_FAILURE);
-	}
-	return value;
-}
-
-static void print_hdr(struct ubl_header *ubl_hdr)
-{
-	printf("Image Type : Davinci UBL Boot Image\n");
-	printf("UBL magic  : %08x\n", ubl_hdr->magic);
-	printf("Entry Point: %08x\n", ubl_hdr->entry);
-	printf("nr of pages: %08x\n", ubl_hdr->pages);
-	printf("start block: %08x\n", ubl_hdr->block);
-	printf("start page : %08x\n", ubl_hdr->page);
-}
-
-static void parse_cfg_cmd(struct ubl_header *ublhdr, int32_t cmd, char *token,
-				char *name, int lineno, int fld, int dcd_len)
-{
-	static int cmd_ver_first = ~0;
-
-	switch (cmd) {
-	case CMD_BOOT_MODE:
-		ublhdr->magic = get_table_entry_id(ublimage_bootops,
-					"ublimage special boot mode", token);
-		if (ublhdr->magic == -1) {
-			fprintf(stderr, "Error: %s[%d] -Invalid boot mode"
-				"(%s)\n", name, lineno, token);
-			exit(EXIT_FAILURE);
-		}
-		ublhdr->magic += UBL_MAGIC_BASE;
-		if (unlikely(cmd_ver_first != 1))
-			cmd_ver_first = 0;
-		break;
-	case CMD_ENTRY:
-		ublhdr->entry = get_cfg_value(token, name, lineno);
-		break;
-	case CMD_PAGE:
-		ublhdr->pages = get_cfg_value(token, name, lineno);
-		break;
-	case CMD_ST_BLOCK:
-		ublhdr->block = get_cfg_value(token, name, lineno);
-		break;
-	case CMD_ST_PAGE:
-		ublhdr->page = get_cfg_value(token, name, lineno);
-		break;
-	case CMD_LD_ADDR:
-		ublhdr->pll_m = get_cfg_value(token, name, lineno);
-		break;
-	}
-}
-
-static void parse_cfg_fld(struct ubl_header *ublhdr, int32_t *cmd,
-		char *token, char *name, int lineno, int fld, int *dcd_len)
-{
-
-	switch (fld) {
-	case CFG_COMMAND:
-		*cmd = get_table_entry_id(ublimage_cmds,
-			"ublimage commands", token);
-		if (*cmd < 0) {
-			fprintf(stderr, "Error: %s[%d] - Invalid command"
-			"(%s)\n", name, lineno, token);
-			exit(EXIT_FAILURE);
-		}
-		break;
-	case CFG_REG_VALUE:
-		parse_cfg_cmd(ublhdr, *cmd, token, name, lineno, fld, *dcd_len);
-		break;
-	default:
-		break;
-	}
-}
-static uint32_t parse_cfg_file(struct ubl_header *ublhdr, char *name)
-{
-	FILE *fd = NULL;
-	char *line = NULL;
-	char *token, *saveptr1, *saveptr2;
-	int lineno = 0;
-	int	i;
-	char *ptr = (char *)ublhdr;
-	int fld;
-	size_t len;
-	int dcd_len = 0;
-	int32_t cmd;
-	int ublhdrlen = sizeof(struct ubl_header);
-
-	fd = fopen(name, "r");
-	if (fd == 0) {
-		fprintf(stderr, "Error: %s - Can't open DCD file\n", name);
-		exit(EXIT_FAILURE);
-	}
-
-	/* Fill header with 0xff */
-	for (i = 0; i < ublhdrlen; i++) {
-		*ptr = 0xff;
-		ptr++;
-	}
-
-	/*
-	 * Very simple parsing, line starting with # are comments
-	 * and are dropped
-	 */
-	while ((getline(&line, &len, fd)) > 0) {
-		lineno++;
-
-		token = strtok_r(line, "\r\n", &saveptr1);
-		if (token == NULL)
-			continue;
-
-		/* Check inside the single line */
-		for (fld = CFG_COMMAND, cmd = CMD_INVALID,
-				line = token; ; line = NULL, fld++) {
-			token = strtok_r(line, " \t", &saveptr2);
-			if (token == NULL)
-				break;
-
-			/* Drop all text starting with '#' as comments */
-			if (token[0] == '#')
-				break;
-
-			parse_cfg_fld(ublhdr, &cmd, token, name,
-					lineno, fld, &dcd_len);
-		}
-	}
-	fclose(fd);
-
-	return dcd_len;
-}
-
-static int ublimage_check_image_types(uint8_t type)
-{
-	if (type == IH_TYPE_UBLIMAGE)
-		return EXIT_SUCCESS;
-	else
-		return EXIT_FAILURE;
-}
-
-static int ublimage_verify_header(unsigned char *ptr, int image_size,
-			struct image_tool_params *params)
-{
-	struct ubl_header *ubl_hdr = (struct ubl_header *)ptr;
-
-	if ((ubl_hdr->magic & 0xFFFFFF00) != UBL_MAGIC_BASE)
-		return -1;
-
-	return 0;
-}
-
-static void ublimage_print_header(const void *ptr)
-{
-	struct ubl_header *ubl_hdr = (struct ubl_header *) ptr;
-
-	print_hdr(ubl_hdr);
-}
-
-static void ublimage_set_header(void *ptr, struct stat *sbuf, int ifd,
-				struct image_tool_params *params)
-{
-	struct ubl_header *ublhdr = (struct ubl_header *)ptr;
-
-	/* Parse configuration file */
-	parse_cfg_file(ublhdr, params->imagename);
-}
-
-int ublimage_check_params(struct image_tool_params *params)
-{
-	if (!params)
-		return CFG_INVALID;
-	if (!strlen(params->imagename)) {
-		fprintf(stderr, "Error: %s - Configuration file not"
-			"specified, it is needed for ublimage generation\n",
-			params->cmdname);
-		return CFG_INVALID;
-	}
-	/*
-	 * Check parameters:
-	 * XIP is not allowed and verify that incompatible
-	 * parameters are not sent at the same time
-	 * For example, if list is required a data image must not be provided
-	 */
-	return	(params->dflag && (params->fflag || params->lflag)) ||
-		(params->fflag && (params->dflag || params->lflag)) ||
-		(params->lflag && (params->dflag || params->fflag)) ||
-		(params->xflag) || !(strlen(params->imagename));
-}
-
-/*
- * ublimage parameters
- */
-static struct image_type_params ublimage_params = {
-	.name		= "Davinci UBL boot support",
-	.header_size	= sizeof(struct ubl_header),
-	.hdr		= (void *)&ublimage_header,
-	.check_image_type = ublimage_check_image_types,
-	.verify_header	= ublimage_verify_header,
-	.print_header	= ublimage_print_header,
-	.set_header	= ublimage_set_header,
-	.check_params	= ublimage_check_params,
-};
-
-void init_ubl_image_type(void)
-{
-	register_image_type(&ublimage_params);
-}