Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 256 deletions

diff --git a/qemu/roms/u-boot/include/configs/s5pc210_universal.h b/qemu/roms/u-boot/include/configs/s5pc210_universal.h
deleted file mode 100644
index 2da887109..000000000
--- a/qemu/roms/u-boot/include/configs/s5pc210_universal.h
+++ /dev/null
@@ -1,256 +0,0 @@
-/*
- * Copyright (C) 2010 Samsung Electronics
- * Minkyu Kang <mk7.kang@samsung.com>
- *
- * Configuation settings for the SAMSUNG Universal (EXYNOS4210) board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_UNIVERSAL_H
-#define __CONFIG_UNIVERSAL_H
-
-#include <configs/exynos4-dt.h>
-
-#define CONFIG_SYS_PROMPT	"Universal # "	/* Monitor Command Prompt */
-
-#undef CONFIG_DEFAULT_DEVICE_TREE
-#define CONFIG_DEFAULT_DEVICE_TREE	exynos4210-universal_c210
-
-#define CONFIG_TIZEN			/* TIZEN lib */
-
-/* Keep L2 Cache Disabled */
-#define CONFIG_SYS_L2CACHE_OFF		1
-
-/* Universal has 2 banks of DRAM */
-#define CONFIG_NR_DRAM_BANKS		2
-#define CONFIG_SYS_SDRAM_BASE		0x40000000
-#define PHYS_SDRAM_1			CONFIG_SYS_SDRAM_BASE
-
-#define SDRAM_BANK_SIZE			(256 << 20)	/* 256 MB */
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (80 * SZ_1M))
-
-/* select serial console configuration */
-#define CONFIG_SERIAL2
-#define CONFIG_BAUDRATE			115200
-
-/* Console configuration */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
-#define CONFIG_BOOTARGS			"Please use defined boot"
-#define CONFIG_BOOTCOMMAND		"run mmcboot"
-#define CONFIG_DEFAULT_CONSOLE		"console=ttySAC1,115200n8\0"
-
-#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR \
-					- GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_MEM_TOP_HIDE	(1 << 20)	/* ram console */
-
-#define CONFIG_SYS_MONITOR_BASE	0x00000000
-
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5000000)
-#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x4800000)
-
-#define CONFIG_SYS_TEXT_BASE		0x44800000
-
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-
-/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
-#define MTDIDS_DEFAULT		"onenand0=samsung-onenand"
-
-#define MTDPARTS_DEFAULT	"mtdparts=samsung-onenand:"\
-				"128k(s-boot)"\
-				",896k(bootloader)"\
-				",256k(params)"\
-				",2816k(config)"\
-				",8m(csa)"\
-				",7m(kernel)"\
-				",1m(log)"\
-				",12m(modem)"\
-				",60m(qboot)"\
-				",-(UBI)\0"
-
-#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
-
-#define MBRPARTS_DEFAULT	"20M(permanent)"\
-				",20M(boot)"\
-				",1G(system)"\
-				",100M(swap)"\
-				",-(UMS)\0"
-
-#define CONFIG_ENV_UBI_MTD	" ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7"
-#define CONFIG_BOOTBLOCK	"10"
-#define CONFIG_UBIBLOCK		"9"
-
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV		CONFIG_MMC_DEFAULT_DEV
-#define CONFIG_ENV_SIZE			4096
-#define CONFIG_ENV_OFFSET		((32 - 4) << 10) /* 32KiB - 4KiB */
-
-#define CONFIG_ENV_UBIFS_OPTION	" rootflags=bulk_read,no_chk_data_crc "
-#define CONFIG_ENV_FLASHBOOT	CONFIG_ENV_UBI_MTD CONFIG_ENV_UBIFS_OPTION \
-				"${mtdparts}"
-
-#define CONFIG_ENV_COMMON_BOOT	"${console} ${meminfo}"
-
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	"updateb=" \
-		"onenand erase 0x0 0x100000;" \
-		"onenand write 0x42008000 0x0 0x100000\0" \
-	"updatek=" \
-		"onenand erase 0xc00000 0x500000;" \
-		"onenand write 0x41008000 0xc00000 0x500000\0" \
-	"bootk=" \
-		"run loaduimage; bootm 0x40007FC0\0" \
-	"updatemmc=" \
-		"mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \
-		"mmc boot 0 1 1 0\0" \
-	"updatebackup=" \
-		"mmc boot 0 1 1 2; mmc write 0 0x42100000 0 0x200;" \
-		"mmc boot 0 1 1 0\0" \
-	"updatebootb=" \
-		"mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
-	"lpj=lpj=3981312\0" \
-	"ubifsboot=" \
-		"set bootargs root=ubi0!rootfs rootfstype=ubifs ${lpj} " \
-		CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
-		CONFIG_ENV_COMMON_BOOT "; run bootk\0" \
-	"tftpboot=" \
-		"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
-		CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
-		CONFIG_ENV_COMMON_BOOT \
-		"; tftp 0x40007FC0 uImage; bootm 0x40007FC0\0" \
-	"nfsboot=" \
-		"set bootargs root=/dev/nfs rw " \
-		"nfsroot=${nfsroot},nolock,tcp " \
-		"ip=${ipaddr}:${serverip}:${gatewayip}:" \
-		"${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
-		"; run bootk\0" \
-	"ramfsboot=" \
-		"set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
-		"${console} ${meminfo} " \
-		"initrd=0x43000000,8M ramdisk=8192\0" \
-	"mmcboot=" \
-		"set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
-		"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
-		"run loaduimage; bootm 0x40007FC0\0" \
-	"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
-	"boottrace=setenv opts initcall_debug; run bootcmd\0" \
-	"mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
-	"verify=n\0" \
-	"rootfstype=ext4\0" \
-	"console=" CONFIG_DEFAULT_CONSOLE \
-	"mtdparts=" MTDPARTS_DEFAULT \
-	"mbrparts=" MBRPARTS_DEFAULT \
-	"meminfo=crashkernel=32M@0x50000000\0" \
-	"nfsroot=/nfsroot/arm\0" \
-	"bootblock=" CONFIG_BOOTBLOCK "\0" \
-	"ubiblock=" CONFIG_UBIBLOCK" \0" \
-	"ubi=enabled\0" \
-	"loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
-	"mmcdev=0\0" \
-	"mmcbootpart=2\0" \
-	"mmcrootpart=3\0" \
-	"opts=always_resume=1"
-
-#define CONFIG_USE_ONENAND_BOARD_INIT
-#define CONFIG_SAMSUNG_ONENAND
-#define CONFIG_SYS_ONENAND_BASE		0x0C000000
-
-#include <asm/arch/gpio.h>
-/*
- * I2C Settings
- */
-#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_get(1, b, 7)
-#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_get(1, b, 6)
-
-#define CONFIG_CMD_I2C
-
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED	50000
-#define CONFIG_SYS_I2C_SOFT_SLAVE	0
-#define CONFIG_SOFT_I2C_READ_REPEATED_START
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS	7
-
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_MAX8998
-
-#define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_S3C_UDC_OTG
-#define CONFIG_USB_GADGET_DUALSPEED
-
-/*
- * SPI Settings
- */
-#define CONFIG_SOFT_SPI
-#define CONFIG_SOFT_SPI_MODE SPI_MODE_3
-#define CONFIG_SOFT_SPI_GPIO_SCLK exynos4_gpio_get(2, y3, 1)
-#define CONFIG_SOFT_SPI_GPIO_MOSI exynos4_gpio_get(2, y3, 3)
-#define CONFIG_SOFT_SPI_GPIO_MISO exynos4_gpio_get(2, y3, 0)
-#define CONFIG_SOFT_SPI_GPIO_CS exynos4_gpio_get(2, y4, 3)
-
-#define SPI_DELAY udelay(1)
-#undef SPI_INIT
-#define SPI_SCL(bit) universal_spi_scl(bit)
-#define SPI_SDA(bit) universal_spi_sda(bit)
-#define SPI_READ universal_spi_read()
-#ifndef	__ASSEMBLY__
-void universal_spi_scl(int bit);
-void universal_spi_sda(int bit);
-int universal_spi_read(void);
-#endif
-
-/* Common misc for Samsung */
-#define CONFIG_MISC_COMMON
-
-#define CONFIG_MISC_INIT_R
-
-/* Download menu - Samsung common */
-#define CONFIG_LCD_MENU
-#define CONFIG_LCD_MENU_BOARD
-
-/* Download menu - definitions for check keys */
-#ifndef __ASSEMBLY__
-#include <power/max8998_pmic.h>
-
-#define KEY_PWR_PMIC_NAME		"MAX8998_PMIC"
-#define KEY_PWR_STATUS_REG		MAX8998_REG_STATUS1
-#define KEY_PWR_STATUS_MASK		(1 << 7)
-#define KEY_PWR_INTERRUPT_REG		MAX8998_REG_IRQ1
-#define KEY_PWR_INTERRUPT_MASK		(1 << 7)
-
-#define KEY_VOL_UP_GPIO			exynos4_gpio_get(2, x2, 0)
-#define KEY_VOL_DOWN_GPIO		exynos4_gpio_get(2, x2, 1)
-#endif /* __ASSEMBLY__ */
-
-/* LCD console */
-#define LCD_BPP			LCD_COLOR16
-#define CONFIG_SYS_WHITE_ON_BLACK
-
-/*
- * LCD Settings
- */
-#define CONFIG_EXYNOS_FB
-#define CONFIG_LCD
-#define CONFIG_CMD_BMP
-#define CONFIG_BMP_16BPP
-#define CONFIG_LD9040
-#define CONFIG_VIDEO_BMP_GZIP
-#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
-
-#define LCD_XRES	480
-#define LCD_YRES	800
-
-#endif	/* __CONFIG_H */