Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 240 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/include/configs/rpi_b.h b/qemu/roms/u-boot/include/configs/rpi_b.h
new file mode 100644
index 000000000..ed8b4dfb5
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/rpi_b.h
@@ -0,0 +1,240 @@
+/*
+ * (C) Copyright 2012 Stephen Warren
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <linux/sizes.h>
+
+/* Architecture, CPU, etc.*/
+#define CONFIG_ARM1176
+#define CONFIG_BCM2835
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_SYS_DCACHE_OFF
+/*
+ * 2835 is a SKU in a series for which the 2708 is the first or primary SoC,
+ * so 2708 has historically been used rather than a dedicated 2835 ID.
+ */
+#define CONFIG_MACH_TYPE		MACH_TYPE_BCM2708
+
+/* Memory layout */
+#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_TEXT_BASE		0x00008000
+#define CONFIG_SYS_UBOOT_BASE		CONFIG_SYS_TEXT_BASE
+/*
+ * The board really has 256M. However, the VC (VideoCore co-processor) shares
+ * the RAM, and uses a configurable portion at the top. We tell U-Boot that a
+ * smaller amount of RAM is present in order to avoid stomping on the area
+ * the VC uses.
+ */
+#define CONFIG_SYS_SDRAM_SIZE		SZ_128M
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + \
+					 CONFIG_SYS_SDRAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_MALLOC_LEN		SZ_4M
+#define CONFIG_SYS_MEMTEST_START	0x00100000
+#define CONFIG_SYS_MEMTEST_END		0x00200000
+#define CONFIG_LOADADDR			0x00200000
+
+/* Flash */
+#define CONFIG_SYS_NO_FLASH
+
+/* Devices */
+/* GPIO */
+#define CONFIG_BCM2835_GPIO
+/* LCD */
+#define CONFIG_LCD
+#define CONFIG_LCD_DT_SIMPLEFB
+#define LCD_BPP				LCD_COLOR16
+/*
+ * Prevent allocation of RAM for FB; the real FB address is queried
+ * dynamically from the VideoCore co-processor, and comes from RAM
+ * not owned by the ARM CPU.
+ */
+#define CONFIG_FB_ADDR			0
+#define CONFIG_VIDEO_BCM2835
+#define CONFIG_SYS_WHITE_ON_BLACK
+
+/* SD/MMC configuration */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_SDHCI
+#define CONFIG_MMC_SDHCI_IO_ACCESSORS
+#define CONFIG_BCM2835_SDHCI
+
+/* Console UART */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK		3000000
+#define CONFIG_PL01x_PORTS		{ (void *)0x20201000 }
+#define CONFIG_CONS_INDEX		0
+#define CONFIG_BAUDRATE			115200
+
+/* Console configuration */
+#define CONFIG_SYS_CBSIZE		1024
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE +		\
+					 sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* Environment */
+#define CONFIG_ENV_SIZE			SZ_16K
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_SYS_LOAD_ADDR		0x1000000
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_PREBOOT \
+	"if load mmc 0:1 ${loadaddr} /uEnv.txt; then " \
+		"env import -t ${loadaddr} ${filesize}; " \
+	"fi"
+
+#define ENV_DEVICE_SETTINGS \
+	"stdin=serial,lcd\0" \
+	"stdout=serial,lcd\0" \
+	"stderr=serial,lcd\0"
+
+/*
+ * Memory layout for where various images get loaded by boot scripts:
+ *
+ * scriptaddr can be pretty much anywhere that doesn't conflict with something
+ *   else. Put it low in memory to avoid conflicts.
+ *
+ * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
+ *   something else. Put it low in memory to avoid conflicts.
+ *
+ * kernel_addr_r must be within the first 128M of RAM in order for the
+ *   kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
+ *   decompress itself to 0x8000 after the start of RAM, kernel_addr_r
+ *   should not overlap that area, or the kernel will have to copy itself
+ *   somewhere else before decompression. Similarly, the address of any other
+ *   data passed to the kernel shouldn't overlap the start of RAM. Pushing
+ *   this up to 16M allows for a sizable kernel to be decompressed below the
+ *   compressed load address.
+ *
+ * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
+ *   the compressed kernel to be up to 16M too.
+ *
+ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
+ *   for the FDT/DTB to be up to 1M, which is hopefully plenty.
+ */
+#define ENV_MEM_LAYOUT_SETTINGS \
+	"scriptaddr=0x00000000\0" \
+	"pxefile_addr_r=0x00100000\0" \
+	"kernel_addr_r=0x01000000\0" \
+	"fdt_addr_r=0x02000000\0" \
+	"fdtfile=bcm2835-rpi-b.dtb\0" \
+	"ramdisk_addr_r=0x02100000\0" \
+
+#define BOOTCMDS_MMC \
+	"mmc_boot=" \
+		"setenv devtype mmc; " \
+		"if mmc dev ${devnum}; then " \
+			"run scan_boot; " \
+		"fi\0" \
+	"bootcmd_mmc0=setenv devnum 0; run mmc_boot;\0"
+#define BOOT_TARGETS_MMC "mmc0"
+
+#define BOOTCMDS_COMMON \
+	"rootpart=1\0" \
+	\
+	"do_script_boot="                                                 \
+		"load ${devtype} ${devnum}:${rootpart} "                  \
+			"${scriptaddr} ${prefix}${script}; "              \
+		"source ${scriptaddr}\0"                                  \
+	\
+	"script_boot="                                                    \
+		"for script in ${boot_scripts}; do "                      \
+			"if test -e ${devtype} ${devnum}:${rootpart} "    \
+					"${prefix}${script}; then "       \
+				"echo Found ${prefix}${script}; "         \
+				"run do_script_boot; "                    \
+				"echo SCRIPT FAILED: continuing...; "     \
+			"fi; "                                            \
+		"done\0"                                                  \
+	\
+	"do_sysboot_boot="                                                \
+		"sysboot ${devtype} ${devnum}:${rootpart} any "           \
+			"${scriptaddr} ${prefix}extlinux/extlinux.conf\0" \
+	\
+	"sysboot_boot="                                                   \
+		"if test -e ${devtype} ${devnum}:${rootpart} "            \
+				"${prefix}extlinux/extlinux.conf; then "  \
+			"echo Found ${prefix}extlinux/extlinux.conf; "    \
+			"run do_sysboot_boot; "                           \
+			"echo SCRIPT FAILED: continuing...; "             \
+		"fi\0"                                                    \
+	\
+	"scan_boot="                                                      \
+		"echo Scanning ${devtype} ${devnum}...; "                 \
+		"for prefix in ${boot_prefixes}; do "                     \
+			"run sysboot_boot; "                              \
+			"run script_boot; "                               \
+		"done\0"                                                  \
+	\
+	"boot_targets=" \
+		BOOT_TARGETS_MMC " " \
+		"\0" \
+	\
+	"boot_prefixes=/\0" \
+	\
+	"boot_scripts=boot.scr.uimg\0" \
+	\
+	BOOTCMDS_MMC
+
+#define CONFIG_BOOTCOMMAND \
+	"for target in ${boot_targets}; do run bootcmd_${target}; done"
+
+#define CONFIG_BOOTCOMMAND \
+	"for target in ${boot_targets}; do run bootcmd_${target}; done"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	ENV_DEVICE_SETTINGS \
+	ENV_MEM_LAYOUT_SETTINGS \
+	BOOTCMDS_COMMON
+
+#define CONFIG_BOOTDELAY 2
+
+/* Shell */
+#define CONFIG_SYS_MAXARGS		8
+#define CONFIG_SYS_PROMPT		"U-Boot> "
+#define CONFIG_COMMAND_HISTORY
+
+/* Commands */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_MMC
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_CMD_PART
+
+/* Device tree support */
+#define CONFIG_OF_BOARD_SETUP
+/* ATAGs support for bootm/bootz */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+
+#include <config_distro_defaults.h>
+
+/* Some things don't make sense on this HW or yet */
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_SAVEENV
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_PING
+
+#endif