Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 122 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/include/configs/r2dplus.h b/qemu/roms/u-boot/include/configs/r2dplus.h
new file mode 100644
index 000000000..24d0c34db
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/r2dplus.h
@@ -0,0 +1,122 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+#define CONFIG_CPU_SH7751	1
+#define CONFIG_CPU_SH_TYPE_R	1
+#define CONFIG_R2DPLUS		1
+#define __LITTLE_ENDIAN__	1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_EXT2
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_SH_ZIMAGEBOOT
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE	1
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_CONS_SCIF1	1
+#define CONFIG_BOARD_LATE_INIT
+
+#define CONFIG_BOOTDELAY	-1
+#define CONFIG_BOOTARGS		"console=ttySC0,115200"
+#define CONFIG_ENV_OVERWRITE	1
+
+/* SDRAM */
+#define CONFIG_SYS_SDRAM_BASE		(0x8C000000)
+#define CONFIG_SYS_SDRAM_SIZE		(0x04000000)
+
+#define CONFIG_SYS_TEXT_BASE	0x0FFC0000
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_PBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_BARGSIZE		512
+
+#define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_TEXT_BASE - 0x100000)
+
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
+/* Address of u-boot image in Flash */
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
+/* Size of DRAM reserved for malloc() use */
+#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)
+#define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
+
+/*
+ * NOR Flash ( Spantion S29GL256P )
+ */
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_BASE		(0xA0000000)
+#define CONFIG_SYS_MAX_FLASH_BANKS (1)
+#define CONFIG_SYS_MAX_FLASH_SECT  256
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x40000
+#define CONFIG_ENV_SIZE        (CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR        (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+
+/*
+ * SuperH Clock setting
+ */
+#define CONFIG_SYS_CLK_FREQ	60000000
+#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
+#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_TMU_CLK_DIV		4
+#define	CONFIG_SYS_PLL_SETTLING_TIME	100/* in us */
+
+/*
+ * IDE support
+ */
+#define CONFIG_IDE_RESET	1
+#define CONFIG_SYS_PIO_MODE		1
+#define CONFIG_SYS_IDE_MAXBUS		1 /* IDE bus */
+#define CONFIG_SYS_IDE_MAXDEVICE	1
+#define CONFIG_SYS_ATA_BASE_ADDR	0xb4000000
+#define CONFIG_SYS_ATA_STRIDE		2 /* 1bit shift */
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x1000	/* data reg offset */
+#define CONFIG_SYS_ATA_REG_OFFSET	0x1000	/* reg offset */
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x800	/* alternate register offset */
+#define CONFIG_IDE_SWAP_IO
+
+/*
+ * SuperH PCI Bridge Configration
+ */
+#define CONFIG_PCI
+#define CONFIG_SH4_PCI
+#define CONFIG_SH7751_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW	1
+#define __io
+#define __mem_pci
+
+#define CONFIG_PCI_MEM_BUS	0xFD000000	/* Memory space base addr */
+#define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE	0x01000000	/* Size of Memory window */
+#define CONFIG_PCI_IO_BUS	0xFE240000	/* IO space base address */
+#define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE	0x00040000	/* Size of IO window */
+#define CONFIG_PCI_SYS_BUS	(CONFIG_SYS_SDRAM_BASE & 0x1fffffff)
+#define CONFIG_PCI_SYS_PHYS	(CONFIG_SYS_SDRAM_BASE & 0x1fffffff)
+#define CONFIG_PCI_SYS_SIZE	CONFIG_SYS_SDRAM_SIZE
+
+/*
+ * Network device (RTL8139) support
+ */
+#define CONFIG_RTL8139
+
+#endif /* __CONFIG_H */