Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 178 deletions

diff --git a/qemu/roms/u-boot/include/configs/mimc200.h b/qemu/roms/u-boot/include/configs/mimc200.h
deleted file mode 100644
index fc7ecfaee..000000000
--- a/qemu/roms/u-boot/include/configs/mimc200.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * Configuration settings for the AVR32 Network Gateway
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/hardware.h>
-
-#define CONFIG_AT32AP
-#define CONFIG_AT32AP7000
-#define CONFIG_MIMC200
-
-#define CONFIG_MIMC200_EXT_FLASH
-
-/*
- * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
- * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
- * and the PBA bus to run at 1/4 the PLL frequency.
- */
-#define CONFIG_PLL
-#define CONFIG_SYS_POWER_MANAGER
-#define CONFIG_SYS_OSC0_HZ			10000000
-#define CONFIG_SYS_PLL0_DIV			1
-#define CONFIG_SYS_PLL0_MUL			15
-#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES	16
-#define CONFIG_SYS_CLKDIV_CPU			0
-#define CONFIG_SYS_CLKDIV_HSB			1
-#define CONFIG_SYS_CLKDIV_PBA			2
-#define CONFIG_SYS_CLKDIV_PBB			1
-
-/* Reserve VM regions for SDRAM, NOR flash and FRAM */
-#define CONFIG_SYS_NR_VM_REGIONS		3
-
-/*
- * The PLLOPT register controls the PLL like this:
- *   icp = PLLOPT<2>
- *   ivco = PLLOPT<1:0>
- *
- * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
- */
-#define CONFIG_SYS_PLL0_OPT			0x04
-
-#define CONFIG_USART_BASE			ATMEL_BASE_USART1
-#define CONFIG_USART_ID				1
-
-#define CONFIG_MIMC200_DBGLINK		1
-
-/* User serviceable stuff */
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#define CONFIG_STACKSIZE		(2048)
-
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_BOOTARGS							\
-	"root=/dev/mtdblock1 rootfstype=jffs2 fbmem=512k console=ttyS1"
-#define CONFIG_BOOTCOMMAND						\
-	"fsload boot/uImage; bootm"
-
-#define CONFIG_SILENT_CONSOLE       /* enable silent startup */
-#define CONFIG_DISABLE_CONSOLE      /* disable console */
-#define CONFIG_SYS_DEVICE_NULLDEV   /* include nulldev device */
-
-#define CONFIG_LCD			1
-
-/*
- * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
- * data on the serial line may interrupt the boot sequence.
- */
-#define CONFIG_BOOTDELAY		0
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-#define CONFIG_AUTOBOOT
-
-/*
- * After booting the board for the first time, new ethernet addresses
- * should be generated and assigned to the environment variables
- * "ethaddr" and "eth1addr". This is normally done during production.
- */
-#define CONFIG_OVERWRITE_ETHADDR_ONCE
-
-/*
- * BOOTP/DHCP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_NET
-
-#define CONFIG_ATMEL_USART
-#define CONFIG_MACB
-#define CONFIG_PORTMUX_PIO
-#define CONFIG_SYS_NR_PIOS			5
-#define CONFIG_SYS_HSDRAMC
-#define CONFIG_MMC
-#define CONFIG_GENERIC_ATMEL_MCI
-#define CONFIG_GENERIC_MMC
-
-#if defined(CONFIG_LCD)
-#define CONFIG_CMD_BMP
-#define CONFIG_ATMEL_LCD		1
-#define LCD_BPP				LCD_COLOR16
-#define CONFIG_BMP_16BPP		1
-#define CONFIG_FB_ADDR			0x10600000
-#define CONFIG_WHITE_ON_BLACK		1
-#define CONFIG_VIDEO_BMP_GZIP 		1
-#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE		262144
-#define CONFIG_ATMEL_LCD_BGR555		1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
-#define CONFIG_SPLASH_SCREEN		1
-#endif
-
-#define CONFIG_SYS_DCACHE_LINESZ		32
-#define CONFIG_SYS_ICACHE_LINESZ		32
-
-#define CONFIG_NR_DRAM_BANKS		1
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-
-#define CONFIG_SYS_FLASH_BASE			0x00000000
-#define CONFIG_SYS_FLASH_SIZE			0x800000
-#define CONFIG_SYS_MAX_FLASH_BANKS		1
-#define CONFIG_SYS_MAX_FLASH_SECT		135
-
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_TEXT_BASE		0x00000000
-
-#define CONFIG_SYS_INTRAM_BASE			INTERNAL_SRAM_BASE
-#define CONFIG_SYS_INTRAM_SIZE			INTERNAL_SRAM_SIZE
-#define CONFIG_SYS_SDRAM_BASE			EBI_SDRAM_BASE
-
-#define CONFIG_SYS_FRAM_BASE			0x08000000
-#define CONFIG_SYS_FRAM_SIZE			0x20000
-
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SIZE			65536
-#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)
-
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
-
-#define CONFIG_SYS_MALLOC_LEN			(1024*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN		(16384)
-
-/* Allow 4MB for the kernel run-time image */
-#define CONFIG_SYS_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
-#define CONFIG_SYS_BOOTPARAMS_LEN		(16 * 1024)
-
-/* Other configuration settings that shouldn't have to change all that often */
-#define CONFIG_SYS_PROMPT			"U-Boot> "
-#define CONFIG_SYS_CBSIZE			256
-#define CONFIG_SYS_MAXARGS			16
-#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP
-
-#define CONFIG_SYS_MEMTEST_START		EBI_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END			(CONFIG_SYS_MEMTEST_START + 0x1f00000)
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
-
-#endif /* __CONFIG_H */