Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 338 deletions

diff --git a/qemu/roms/u-boot/include/configs/km/km_arm.h b/qemu/roms/u-boot/include/configs/km/km_arm.h
deleted file mode 100644
index 6d77680c8..000000000
--- a/qemu/roms/u-boot/include/configs/km/km_arm.h
+++ /dev/null
@@ -1,338 +0,0 @@
-/*
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Prafulla Wadaskar <prafulla@marvell.com>
- *
- * (C) Copyright 2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2010-2011
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * for linking errors see
- * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
- */
-
-#ifndef _CONFIG_KM_ARM_H
-#define _CONFIG_KM_ARM_H
-
-/* We got removed from Linux mach-types.h */
-#define MACH_TYPE_KM_KIRKWOOD          2255
-
-/*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_MARVELL
-#define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
-#define CONFIG_KIRKWOOD			/* SOC Family Name */
-#define CONFIG_KW88F6281		/* SOC Name */
-#define CONFIG_MACH_KM_KIRKWOOD		/* Machine type */
-
-#define CONFIG_MACH_TYPE	MACH_TYPE_KM_KIRKWOOD
-
-#define CONFIG_NAND_ECC_BCH
-#define CONFIG_BCH
-
-/* include common defines/options for all Keymile boards */
-#include "keymile-common.h"
-
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_SF
-
-/* SPI NOR Flash default params, used by sf commands */
-#define CONFIG_SF_DEFAULT_SPEED		8100000
-#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
-
-#if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
-#define CONFIG_ENV_SPI_BUS		0
-#define CONFIG_ENV_SPI_CS		0
-#define CONFIG_ENV_SPI_MAX_HZ		8100000
-#define CONFIG_ENV_SPI_MODE		SPI_MODE_3
-#endif
-
-/* Reserve 4 MB for malloc */
-#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
-
-#include "asm/arch/config.h"
-
-#define CONFIG_SYS_TEXT_BASE	0x07d00000	/* code address before reloc */
-#define CONFIG_SYS_MEMTEST_START 0x00400000	/* 4M */
-#define CONFIG_SYS_MEMTEST_END	0x007fffff	/*(_8M -1) */
-#define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
-
-/* pseudo-non volatile RAM [hex] */
-#define CONFIG_KM_PNVRAM	0x80000
-/* physical RAM MTD size [hex] */
-#define CONFIG_KM_PHRAM		0x17F000
-
-#define CONFIG_KM_CRAMFS_ADDR	0x2400000
-#define CONFIG_KM_KERNEL_ADDR	0x2000000	/* 3098KBytes */
-#define CONFIG_KM_FDT_ADDR	0x23E0000	/*  128KBytes */
-
-/* architecture specific default bootargs */
-#define CONFIG_KM_DEF_BOOT_ARGS_CPU					\
-		"bootcountaddr=${bootcountaddr} ${mtdparts}"		\
-		" boardid=0x${IVM_BoardId} hwkey=0x${IVM_HWKey}"
-
-#define CONFIG_KM_DEF_ENV_CPU						\
-	"u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.kwb\0"		\
-	CONFIG_KM_UPDATE_UBOOT						\
-	"set_fdthigh=setenv fdt_high ${kernelmem}\0"			\
-	""
-
-#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
-#define CONFIG_MISC_INIT_R
-
-/* Pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
-#define CONFIG_SYS_NS16550_COM1		KW_UART0_BASE
-#define CONFIG_SYS_NS16550_COM2		KW_UART1_BASE
-
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
-#define CONFIG_CONS_INDEX	1	/* Console on UART0 */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_BOOTMAPSZ	(8 << 20)	/* Initial Memmap for Linux */
-#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs  */
-#define CONFIG_INITRD_TAG		/* enable INITRD tag */
-#define CONFIG_SETUP_MEMORY_TAGS	/* enable memory tag */
-
-/*
- * Commands configuration
- */
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_NFS
-
-/*
- * Without NOR FLASH we need this
- */
-#define CONFIG_SYS_NO_FLASH
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_IMLS
-
-/*
- * NAND Flash configuration
- */
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-
-#define BOOTFLASH_START		0x0
-
-/* Kirkwood has two serial IF */
-#if (CONFIG_CONS_INDEX == 2)
-#define CONFIG_KM_CONSOLE_TTY	"ttyS1"
-#else
-#define CONFIG_KM_CONSOLE_TTY	"ttyS0"
-#endif
-
-/*
- * Other required minimal configurations
- */
-#define CONFIG_CONSOLE_INFO_QUIET	/* some code reduction */
-#define CONFIG_ARCH_CPU_INIT		/* call arch_cpu_init() */
-#define CONFIG_ARCH_MISC_INIT		/* call arch_misc_init() */
-#define CONFIG_DISPLAY_CPUINFO		/* Display cpu info */
-#define CONFIG_NR_DRAM_BANKS	4
-#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
-
-/*
- * Ethernet Driver configuration
- */
-#define CONFIG_NETCONSOLE	/* include NetConsole support   */
-#define CONFIG_MII		/* expose smi ove miiphy interface */
-#define CONFIG_CMD_MII		/* to debug mdio phy config */
-#define CONFIG_MVGBE		/* Enable Marvell Gbe Controller Driver */
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
-#define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
-#define CONFIG_PHY_BASE_ADR	0
-#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
-#define CONFIG_KM_COMMON_ETH_INIT /* standard km ethernet_present for piggy */
-
-/*
- * UBI related stuff
- */
-#define CONFIG_SYS_USE_UBI
-
-/*
- * I2C related stuff
- */
-#undef CONFIG_I2C_MVTWSI
-#define CONFIG_SYS_I2C
-#define	CONFIG_SYS_I2C_SOFT	/* I2C bit-banged	*/
-#define CONFIG_SYS_I2C_INIT_BOARD
-
-#define	CONFIG_KIRKWOOD_GPIO		/* Enable GPIO Support */
-#define CONFIG_SYS_NUM_I2C_BUSES	6
-#define CONFIG_SYS_I2C_MAX_HOPS		1
-#define CONFIG_SYS_I2C_BUSES	{	{0, {I2C_NULL_HOP} }, \
-					{0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
-					{0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
-					{0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
-					{0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
-					{0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
-				}
-
-#ifndef __ASSEMBLY__
-#include <asm/arch-kirkwood/gpio.h>
-extern void __set_direction(unsigned pin, int high);
-void set_sda(int state);
-void set_scl(int state);
-int get_sda(void);
-int get_scl(void);
-#define KM_KIRKWOOD_SDA_PIN	8
-#define KM_KIRKWOOD_SCL_PIN	9
-#define KM_KIRKWOOD_SOFT_I2C_GPIOS	0x0300
-#define KM_KIRKWOOD_ENV_WP	38
-
-#define I2C_ACTIVE	__set_direction(KM_KIRKWOOD_SDA_PIN, 0)
-#define I2C_TRISTATE	__set_direction(KM_KIRKWOOD_SDA_PIN, 1)
-#define I2C_READ	(kw_gpio_get_value(KM_KIRKWOOD_SDA_PIN) ? 1 : 0)
-#define I2C_SDA(bit)	kw_gpio_set_value(KM_KIRKWOOD_SDA_PIN, bit)
-#define I2C_SCL(bit)	kw_gpio_set_value(KM_KIRKWOOD_SCL_PIN, bit)
-#endif
-
-#define I2C_DELAY	udelay(1)
-#define I2C_SOFT_DECLARATIONS
-
-#define	CONFIG_SYS_I2C_SOFT_SLAVE	0x0
-#define	CONFIG_SYS_I2C_SOFT_SPEED	100000
-
-/* EEprom support 24C128, 24C256 valid for environment eeprom */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	6 /* 64 Byte write page */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
-
-/*
- *  Environment variables configurations
- */
-#if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
-#define CONFIG_ENV_IS_IN_SPI_FLASH  /* use SPI-Flash for environment vars */
-#define CONFIG_ENV_OFFSET		0xc0000     /* no bracets! */
-#define CONFIG_ENV_SIZE			0x02000     /* Size of Environment */
-#define CONFIG_ENV_SECT_SIZE		0x10000
-#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + \
-					CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_TOTAL_SIZE		0x20000     /* no bracets! */
-#else
-#define CONFIG_ENV_IS_IN_EEPROM		/* use EEPROM for environment vars */
-#define CONFIG_SYS_DEF_EEPROM_ADDR	0x50
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-#define CONFIG_SYS_EEPROM_WREN
-#define CONFIG_ENV_OFFSET		0x0 /* no bracets! */
-#define CONFIG_ENV_SIZE			(0x2000 - CONFIG_ENV_OFFSET)
-#define CONFIG_I2C_ENV_EEPROM_BUS	KM_ENV_BUS
-#define CONFIG_ENV_OFFSET_REDUND	0x2000 /* no bracets! */
-#define CONFIG_ENV_SIZE_REDUND		(CONFIG_ENV_SIZE)
-#endif
-
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
-
-/* SPI bus claim MPP configuration */
-#define CONFIG_SYS_KW_SPI_MPP	0x0
-
-#define FLASH_GPIO_PIN			0x00010000
-#define KM_FLASH_GPIO_PIN	16
-
-#ifndef MTDIDS_DEFAULT
-# define MTDIDS_DEFAULT		"nand0=orion_nand"
-#endif /* MTDIDS_DEFAULT */
-
-#ifndef MTDPARTS_DEFAULT
-# define MTDPARTS_DEFAULT	"mtdparts="			\
-	"orion_nand:"						\
-		"-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");"
-#endif /* MTDPARTS_DEFAULT */
-
-#define	CONFIG_KM_UPDATE_UBOOT						\
-	"update="							\
-		"sf probe 0;sf erase 0 +${filesize};"			\
-		"sf write ${load_addr_r} 0 ${filesize};\0"
-
-#if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
-#define CONFIG_KM_NEW_ENV						\
-	"newenv=sf probe 0;"						\
-		"sf erase " __stringify(CONFIG_ENV_OFFSET) " "		\
-		__stringify(CONFIG_ENV_TOTAL_SIZE)"\0"
-#else
-#define CONFIG_KM_NEW_ENV						\
-	"newenv=setenv addr 0x100000 && "				\
-		"i2c dev " __stringify(CONFIG_I2C_ENV_EEPROM_BUS) "; "  \
-		"mw.b ${addr} 0 4 && "					\
-		"eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR)	\
-		" ${addr} " __stringify(CONFIG_ENV_OFFSET) " 4 && "	\
-		"eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR)	\
-		" ${addr} " __stringify(CONFIG_ENV_OFFSET_REDUND) " 4\0"
-#endif
-
-#ifndef CONFIG_KM_BOARD_EXTRA_ENV
-#define CONFIG_KM_BOARD_EXTRA_ENV       ""
-#endif
-
-/*
- * Default environment variables
- */
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	CONFIG_KM_BOARD_EXTRA_ENV					\
-	CONFIG_KM_DEF_ENV						\
-	CONFIG_KM_NEW_ENV						\
-	"arch=arm\0"							\
-	""
-
-#if defined(CONFIG_SYS_NO_FLASH)
-#undef	CONFIG_FLASH_CFI_MTD
-#undef	CONFIG_JFFS2_CMDLINE
-#endif
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-/* Do early setups now in board_init_f() */
-#define CONFIG_BOARD_EARLY_INIT_F
-
-/*
- * resereved pram area at the end of memroy [hex]
- * 8Mbytes for switch + 4Kbytes for bootcount
- */
-#define CONFIG_KM_RESERVED_PRAM 0x801000
-/* address for the bootcount (taken from end of RAM) */
-#define BOOTCOUNT_ADDR          (CONFIG_KM_RESERVED_PRAM)
-/* Use generic bootcount RAM driver */
-#define CONFIG_BOOTCOUNT_RAM
-
-/* enable POST tests */
-#define CONFIG_POST	(CONFIG_SYS_POST_MEM_REGIONS)
-#define CONFIG_POST_SKIP_ENV_FLAGS
-#define CONFIG_POST_EXTERNAL_WORD_FUNCS
-#define CONFIG_CMD_DIAG
-
-/* we do the whole PCIe FPGA config stuff here */
-#define	CONFIG_BOARD_LATE_INIT
-
-#endif /* _CONFIG_KM_ARM_H */