Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 404 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/include/configs/eb_cpux9k2.h b/qemu/roms/u-boot/include/configs/eb_cpux9k2.h
new file mode 100644
index 000000000..f7e70aa57
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/eb_cpux9k2.h
@@ -0,0 +1,404 @@
+/*
+ * (C) Copyright 2008-2009
+ * BuS Elektronik GmbH & Co. KG <www.bus-elektronik.de>
+ * Jens Scharsig <esw@bus-elektronik.de>
+ *
+ * Configuation settings for the EB+CPUx9K2 board.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _CONFIG_EB_CPUx9K2_H_
+#define _CONFIG_EB_CPUx9K2_H_
+
+/*--------------------------------------------------------------------------*/
+
+#define CONFIG_AT91RM9200		/* It's an Atmel AT91RM9200 SoC	*/
+#define CONFIG_EB_CPUX9K2		/* on an EP+CPUX9K2 Board	*/
+#define USE_920T_MMU
+
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_IDENT_STRING	" on EB+CPUx9K2"
+
+#include <asm/hardware.h>	/* needed for port definitions */
+
+#define CONFIG_MISC_INIT_R
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define MACH_TYPE_EB_CPUX9K2		1977
+#define CONFIG_MACH_TYPE		MACH_TYPE_EB_CPUX9K2
+
+#define CONFIG_SYS_CACHELINE_SIZE	32
+#define CONFIG_SYS_DCACHE_OFF
+
+/*--------------------------------------------------------------------------*/
+#ifndef CONFIG_RAMBOOT
+#define CONFIG_SYS_TEXT_BASE		0x00000000
+#else
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_TEXT_BASE		0x21800000
+#endif
+#define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
+#define CONFIG_STANDALONE_LOAD_ADDR	0x21000000
+
+#define CONFIG_BOOT_RETRY_TIME		30
+#define CONFIG_CMDLINE_EDITING
+
+#define CONFIG_SYS_PROMPT	"U-Boot> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE	512		/* Console I/O Buffer Size */
+#define CONFIG_SYS_MAXARGS	32		/* max number of command args */
+#define CONFIG_SYS_PBSIZE	\
+	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+
+/*
+ * ARM asynchronous clock
+ */
+
+#define AT91C_MAIN_CLOCK	179404800	/* from 12.288 MHz * 73 / 5 */
+#define AT91C_MASTER_CLOCK	(AT91C_MAIN_CLOCK / 3)
+#define CONFIG_SYS_HZ_CLOCK 	(AT91C_MASTER_CLOCK / 2)
+
+#define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock */
+
+#define CONFIG_CMDLINE_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+#define CONFIG_SYS_USE_MAIN_OSCILLATOR	1
+/* flash */
+#define CONFIG_SYS_EBI_CFGR_VAL		0x00000000
+#define CONFIG_SYS_SMC_CSR0_VAL		0x00003284 /* 16bit, 2 TDF, 4 WS */
+
+/* clocks */
+#define CONFIG_SYS_PLLAR_VAL		0x20483E05 /* 179.4048 MHz for PCK */
+#define CONFIG_SYS_PLLBR_VAL		0x104C3E0A /* 47.3088 MHz (for USB) */
+#define CONFIG_SYS_MCKR_VAL		0x00000202 /* PCK/3 = MCK Clock */
+
+/*
+ * Size of malloc() pool
+ */
+
+#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
+
+/*
+ * sdram
+ */
+
+#define CONFIG_NR_DRAM_BANKS		1
+
+#define CONFIG_SYS_SDRAM_BASE		0x20000000
+#define CONFIG_SYS_SDRAM_SIZE		0x04000000  /* 64 megs */
+#define CONFIG_SYS_INIT_SP_ADDR		0x00204000  /* use internal SRAM */
+
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + \
+					CONFIG_SYS_SDRAM_SIZE - 0x00400000 - \
+					CONFIG_SYS_MALLOC_LEN)
+
+#define CONFIG_SYS_PIOC_ASR_VAL		0xFFFF0000 /* PIOC as D16/D31 */
+#define CONFIG_SYS_PIOC_BSR_VAL		0x00000000
+#define CONFIG_SYS_PIOC_PDR_VAL		0xFFFF0000
+#define CONFIG_SYS_EBI_CSA_VAL		0x00000002 /* CS1=SDRAM */
+#define CONFIG_SYS_SDRC_CR_VAL		0x2188c159 /* set up the SDRAM */
+#define CONFIG_SYS_SDRAM		0x20000000 /* address of the SDRAM */
+#define CONFIG_SYS_SDRAM1		0x20000080 /* address of the SDRAM */
+#define CONFIG_SYS_SDRAM_VAL		0x00000000 /* value written to SDRAM */
+#define CONFIG_SYS_SDRC_MR_VAL		0x00000002 /* Precharge All */
+#define CONFIG_SYS_SDRC_MR_VAL1		0x00000004 /* refresh */
+#define CONFIG_SYS_SDRC_MR_VAL2		0x00000003 /* Load Mode Register */
+#define CONFIG_SYS_SDRC_MR_VAL3		0x00000000 /* Normal Mode */
+#define CONFIG_SYS_SDRC_TR_VAL		0x000002E0 /* Write refresh rate */
+
+/*
+ * Command line configuration
+ */
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BMP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+#define CONFIG_I2C_CMD_TREE
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_UBIFS
+
+#define CONFIG_SYS_LONGHELP
+
+/*
+ * MTD defines
+ */
+
+#define CONFIG_FLASH_CFI_MTD
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+
+#define MTDIDS_DEFAULT		"nor0=physmap-flash.0,nand0=atmel_nand"
+#define MTDPARTS_DEFAULT	"mtdparts="				\
+					"physmap-flash.0:"		\
+						"512k(U-Boot),"		\
+						"128k(Env),"		\
+						"128k(Splash),"		\
+						"4M(Kernel),"		\
+						"384k(MiniFS),"		\
+						"-(FS)"			\
+					";"				\
+					"atmel_nand:"			\
+						"1M(emergency),"	\
+						"-(data)"
+/*
+ * Hardware drivers
+ */
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_AT91C_PQFP_UHPBUG
+#define CONFIG_USB_STORAGE
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+#define CONFIG_EFI_PARTITION
+
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00300000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91rm9200"
+
+/*
+ * UART/CONSOLE
+ */
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE	ATMEL_BASE_DBGU
+#define CONFIG_USART_ID		0/* ignored in arm */
+
+/*
+ * network
+ */
+
+#define CONFIG_NET_RETRY_COUNT		10
+#define CONFIG_RESET_PHY_R		1
+
+#define CONFIG_DRIVER_AT91EMAC		1
+#define CONFIG_DRIVER_AT91EMAC_QUIET	1
+#define CONFIG_SYS_RX_ETH_BUFFER	8
+#define CONFIG_MII			1
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * I2C-Bus
+ */
+
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0
+
+/* Software  I2C driver configuration */
+
+#define AT91_PIN_SDA			(1<<25)		/* AT91C_PIO_PA25 */
+#define AT91_PIN_SCL			(1<<26)		/* AT91C_PIO_PA26 */
+
+#define CONFIG_SYS_I2C_INIT_BOARD
+
+#define I2C_INIT	i2c_init_board();
+#define I2C_ACTIVE	writel(ATMEL_PMX_AA_TWD, &pio->pioa.mddr);
+#define I2C_TRISTATE	writel(ATMEL_PMX_AA_TWD, &pio->pioa.mder);
+#define I2C_READ	((readl(&pio->pioa.pdsr) & ATMEL_PMX_AA_TWD) != 0)
+#define I2C_SDA(bit)						\
+	if (bit)						\
+		writel(ATMEL_PMX_AA_TWD, &pio->pioa.sodr);	\
+	else							\
+		writel(ATMEL_PMX_AA_TWD, &pio->pioa.codr);
+#define I2C_SCL(bit)						\
+	if (bit)						\
+		writel(ATMEL_PMX_AA_TWCK, &pio->pioa.sodr);	\
+	else							\
+		writel(ATMEL_PMX_AA_TWCK, &pio->pioa.codr);
+
+#define I2C_DELAY	udelay(2500000/CONFIG_SYS_I2C_SOFT_SPEED)
+
+/* I2C-RTC */
+
+#ifdef CONFIG_CMD_DATE
+#define CONFIG_RTC_DS1338
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68
+#endif
+
+/* EEPROM */
+
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
+
+/* FLASH organization */
+
+/*  NOR-FLASH */
+#define CONFIG_FLASH_SHOW_PROGRESS	45
+
+#define CONFIG_FLASH_CFI_DRIVER	1
+
+#define PHYS_FLASH_1			0x10000000
+#define PHYS_FLASH_SIZE			0x01000000  /* 16 megs main flash */
+#define CONFIG_SYS_FLASH_CFI		1
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+
+#define CONFIG_SYS_FLASH_PROTECTION	1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_SECT	512
+#define CONFIG_SYS_FLASH_ERASE_TOUT	6000
+#define CONFIG_SYS_FLASH_WRITE_TOUT	2000
+
+/* NAND */
+
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		0x40000000
+#define CONFIG_SYS_NAND_DBW_8		1
+
+/* Status LED's */
+
+#define CONFIG_STATUS_LED		1
+#define CONFIG_BOARD_SPECIFIC_LED	1
+
+#define STATUS_LED_BOOT			1
+#define STATUS_LED_ACTIVE		0
+
+#define STATUS_LED_BIT			1	/* AT91C_PIO_PD0 green LED */
+#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
+#define STATUS_LED_STATE 		STATUS_LED_OFF		/* BLINKING */
+#define STATUS_LED_BIT1			2	/* AT91C_PIO_PD1  red LED */
+#define STATUS_LED_STATE1		STATUS_LED_ON		/* BLINKING */
+#define STATUS_LED_PERIOD1		(CONFIG_SYS_HZ / 4)
+
+#define	CONFIG_VIDEO			1
+
+/* Options */
+
+#ifdef CONFIG_VIDEO
+
+#define CONFIG_VIDEO_VCXK			1
+
+#define CONFIG_SPLASH_SCREEN			1
+
+#define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN	4
+#define CONFIG_SYS_VCXK_BASE	0x30000000
+
+#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN		(1<<3)
+#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT	piob
+#define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR		odr
+
+#define CONFIG_SYS_VCXK_ENABLE_PIN		(1<<5)
+#define CONFIG_SYS_VCXK_ENABLE_PORT		piob
+#define CONFIG_SYS_VCXK_ENABLE_DDR		oer
+
+#define CONFIG_SYS_VCXK_REQUEST_PIN		(1<<2)
+#define CONFIG_SYS_VCXK_REQUEST_PORT		piob
+#define CONFIG_SYS_VCXK_REQUEST_DDR		oer
+
+#define CONFIG_SYS_VCXK_INVERT_PIN		(1<<4)
+#define CONFIG_SYS_VCXK_INVERT_PORT		piob
+#define CONFIG_SYS_VCXK_INVERT_DDR		oer
+
+#define CONFIG_SYS_VCXK_RESET_PIN		(1<<6)
+#define CONFIG_SYS_VCXK_RESET_PORT		piob
+#define CONFIG_SYS_VCXK_RESET_DDR		oer
+
+#endif	/* CONFIG_VIDEO */
+
+/* Environment */
+
+#define CONFIG_BOOTDELAY		5
+
+#define CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0x80000)
+#define CONFIG_ENV_SIZE			0x20000 /* sectors are 128K here */
+
+#define CONFIG_BAUDRATE 		115200
+
+#define CONFIG_BOOTCOMMAND		"run nfsboot"
+
+#define CONFIG_NFSBOOTCOMMAND 						\
+		"dhcp $(copy_addr) uImage_cpux9k2;"			\
+		"run bootargsdefaults;"					\
+		"set bootargs $(bootargs) boot=nfs "			\
+		";echo $(bootargs)"					\
+	";bootm"
+
+#define CONFIG_EXTRA_ENV_SETTINGS 					\
+	"displaywidth=256\0"						\
+	"displayheight=512\0"						\
+	"displaybsteps=1023\0"						\
+	"ubootaddr=10000000\0"						\
+	"splashimage=100A0000\0"					\
+	"kerneladdr=100C0000\0"						\
+	"kernelsize=00400000\0"						\
+	"rootfsaddr=10520000\0"						\
+	"copy_addr=21200000\0"						\
+	"rootfssize=00AE0000\0"						\
+	"mtdids=" MTDIDS_DEFAULT "\0"					\
+	"mtdparts=" MTDPARTS_DEFAULT "\0"				\
+	"bootargsdefaults=set bootargs "				\
+		"console=ttyS0,115200 "					\
+		"video=vcxk_fb:xres:${displaywidth},"			\
+			"yres:${displayheight},"			\
+			"bres:${displaybsteps} "			\
+		"mem=62M "						\
+		"panic=10 "						\
+		"uboot=\\\"${ver}\\\" "					\
+		"\0"							\
+	"update_kernel=protect off $(kerneladdr) +$(kernelsize);"	\
+		"dhcp $(copy_addr) uImage_cpux9k2;"			\
+		"erase $(kerneladdr) +$(kernelsize);"			\
+		"cp.b $(fileaddr) $(kerneladdr) $(filesize);"		\
+		"protect on $(kerneladdr) +$(kernelsize)"		\
+		"\0"							\
+	"update_root=protect off $(rootfsaddr) +$(rootfssize);"		\
+		"dhcp $(copy_addr) rfs;"				\
+		"erase $(rootfsaddr) +$(rootfssize);"			\
+		"cp.b $(fileaddr) $(rootfsaddr) $(filesize);"		\
+		"\0"							\
+	"update_uboot=protect off 10000000 1007FFFF;"			\
+		"dhcp $(copy_addr) u-boot_eb_cpux9k2;"			\
+		"erase 10000000 1007FFFF;"				\
+		"cp.b $(fileaddr) $(ubootaddr) $(filesize);"		\
+		"protect on 10000000 1007FFFF;reset\0"			\
+	"update_splash=protect off $(splashimage) +20000;"		\
+		"dhcp $(copy_addr) splash_eb_cpux9k2.bmp;"		\
+		"erase $(splashimage) +20000;"				\
+		"cp.b $(fileaddr) $(splashimage) $(filesize);"		\
+		"protect on $(splashimage) +20000;reset\0"		\
+	"emergency=run bootargsdefaults;"				\
+		"set bootargs $(bootargs) root=initramfs boot=emergency " \
+		";bootm $(kerneladdr)\0"				\
+	"netemergency=run bootargsdefaults;"				\
+		"dhcp $(copy_addr) uImage_cpux9k2;"			\
+		"set bootargs $(bootargs) root=initramfs boot=emergency " \
+		";bootm $(copy_addr)\0"					\
+	"norboot=run bootargsdefaults;"					\
+		"set bootargs $(bootargs) root=initramfs boot=local "	\
+		";bootm $(kerneladdr)\0"				\
+	"nandboot=run bootargsdefaults;"				\
+		"set bootargs $(bootargs) root=initramfs boot=nand "	\
+		";bootm $(kerneladdr)\0"				\
+	" "
+
+/*--------------------------------------------------------------------------*/
+
+#endif
+
+/* EOF */