Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 321 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/include/configs/ea20.h b/qemu/roms/u-boot/include/configs/ea20.h
new file mode 100644
index 000000000..1d50a37d2
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/ea20.h
@@ -0,0 +1,321 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Based on davinci_dvevm.h. Original Copyrights follow:
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * Board
+ */
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_USE_SPIFLASH
+#define	CONFIG_SYS_USE_NAND
+#define CONFIG_DRIVER_TI_EMAC_USE_RMII
+#define CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_VIDEO
+#define CONFIG_PREBOOT
+
+/*
+ * SoC Configuration
+ */
+#define CONFIG_MACH_DAVINCI_DA850_EVM
+#define CONFIG_ARM926EJS		/* arm926ejs CPU core */
+#define CONFIG_SOC_DA8XX		/* TI DA8xx SoC */
+#define CONFIG_SOC_DA850		/* TI DA850 SoC */
+#define CONFIG_SYS_CLK_FREQ		clk_get(DAVINCI_ARM_CLKID)
+#define CONFIG_SYS_OSCIN_FREQ		24000000
+#define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
+#define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_TEXT_BASE		0xc1080000
+#define CONFIG_DA8XX_GPIO
+
+/*
+ * Memory Info
+ */
+#define CONFIG_SYS_MALLOC_LEN	(0x10000 + 4*1024*1024) /* malloc() len */
+#define PHYS_SDRAM_1		DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
+#define PHYS_SDRAM_1_SIZE	(64 << 20) /* SDRAM size 64MB */
+#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
+
+/* memtest start addr */
+#define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM_1 + 0x2000000)
+
+/* memtest will be run on 16MB */
+#define CONFIG_SYS_MEMTEST_END	(PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
+
+#define CONFIG_NR_DRAM_BANKS	1 /* we have 1 bank of DRAM */
+
+/*
+ * Serial Driver info
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	-4	/* NS16550 register size */
+#define CONFIG_SYS_NS16550_COM1	DAVINCI_UART0_BASE /* Base address of UART0 */
+#define CONFIG_SYS_NS16550_CLK	clk_get(DAVINCI_UART2_CLKID)
+#define CONFIG_CONS_INDEX	1		/* use UART0 for console */
+#define CONFIG_BAUDRATE		115200		/* Default baud rate */
+
+#define CONFIG_SPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_DAVINCI_SPI
+#define CONFIG_SYS_SPI_BASE		DAVINCI_SPI1_BASE
+#define CONFIG_SYS_SPI_CLK		clk_get(DAVINCI_SPI1_CLKID)
+#define CONFIG_SF_DEFAULT_SPEED		30000000
+#define CONFIG_ENV_SPI_MAX_HZ	CONFIG_SF_DEFAULT_SPEED
+
+/*
+ * I2C Configuration
+ */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_DAVINCI
+#define CONFIG_SYS_DAVINCI_I2C_SPEED		100000
+#define CONFIG_SYS_DAVINCI_I2C_SLAVE   10 /* Bogus, master-only in U-Boot */
+
+/*
+ * Network & Ethernet Configuration
+ */
+#ifdef CONFIG_DRIVER_TI_EMAC
+#define CONFIG_EMAC_MDIO_PHY_NUM	0
+#define CONFIG_MII
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_NET_RETRY_COUNT	10
+#endif
+
+#ifdef CONFIG_USE_SPIFLASH
+#undef CONFIG_ENV_IS_IN_FLASH
+#undef CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SIZE			(8 << 10)
+#define CONFIG_ENV_OFFSET		0x80000
+#define CONFIG_ENV_SECT_SIZE		(64 << 10)
+#define CONFIG_SYS_NO_FLASH
+#endif
+
+
+#if defined(CONFIG_VIDEO)
+#define CONFIG_VIDEO_DA8XX
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_CMD_BMP
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#endif
+
+/*
+ * U-Boot general configuration
+ */
+#define CONFIG_BOOTFILE		"uImage" /* Boot file name */
+#define CONFIG_SYS_PROMPT	"ea20 > " /* Command Prompt */
+#define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS	16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
+#define CONFIG_SYS_LOAD_ADDR	(PHYS_SDRAM_1 + 0x700000)
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+
+/*
+ * Linux Information
+ */
+#define LINUX_BOOT_PARAM_ADDR	(PHYS_SDRAM_1 + 0x100)
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTDELAY	3
+
+/*
+ * U-Boot commands
+ */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_GPIO
+
+#ifdef CONFIG_CMD_BDI
+#define CONFIG_CLOCKS
+#endif
+
+#ifndef CONFIG_DRIVER_TI_EMAC
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_PING
+#endif
+
+/* NAND Setup */
+#ifdef CONFIG_SYS_USE_NAND
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_NAND
+
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_LZO
+#define CONFIG_RBTREE
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+
+#define CONFIG_NAND_DAVINCI
+#define	CONFIG_SYS_NAND_PAGE_2K
+#define CONFIG_SYS_NAND_NO_SUBPAGE
+#define CONFIG_SYS_NAND_CS		2
+#define CONFIG_SYS_NAND_BASE		DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
+#undef CONFIG_SYS_NAND_HW_ECC
+#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
+#define	CONFIG_SYS_NAND_USE_FLASH_BBT
+#define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */
+#endif
+
+/* SPI Flash */
+#ifdef CONFIG_USE_SPIFLASH
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_FLASH
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SAVEENV
+#endif
+
+#if !defined(CONFIG_SYS_USE_NAND) && \
+	!defined(CONFIG_USE_NOR) && \
+	!defined(CONFIG_USE_SPIFLASH)
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_SIZE		(16 << 10)
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_ENV
+#endif
+
+/* additions for new relocation code, must added to all boards */
+#define CONFIG_SYS_SDRAM_BASE		0xc0000000
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - \
+					GENERATED_GBL_DATA_SIZE)
+/*
+ * Default environment and default scripts
+ * to update uboot and load kernel
+ */
+
+#define CONFIG_HOSTNAME ea20
+#define	CONFIG_EXTRA_ENV_SETTINGS				\
+	"as=3\0"							\
+	"netdev=eth0\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"rfsbargs=setenv bootargs root=/dev/nfs rw "			\
+	"nfsroot=${serverip}:${rfsbpath}\0"				\
+	"testrfsargs=setenv bootargs root=/dev/nfs rw "		\
+	"nfsroot=${serverip}:${testrfspath}\0"				\
+	"ramargs=setenv bootargs root=/dev/ram rw initrd="		\
+	"0x${ramdisk_addr_r},4M\0"					\
+	"mtdids=nand0=davinci_nand.0\0"				\
+	"serverip=192.168.5.249\0"					\
+	"ipaddr=192.168.5.248\0"					\
+	"rootpath=/opt/eldk/arm\0"					\
+	"splashpos=230,180\0"						\
+	"testrfspath=/opt/eldk/test_arm\0"				\
+	"tempmac=setenv ethaddr 02:ea:20:ff:ff:ff\0"			\
+	"nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc "	\
+	"ubi.mtd=${as} root=ubi0:rootfs\0"				\
+	"nandrwargs=setenv bootargs rootfstype=ubifs rw chk_data_crc "	\
+	"ubi.mtd=${as} root=ubi0:rootfs\0"				\
+	"addip_sta=setenv bootargs ${bootargs} "			\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"		\
+	"addip=if test -n ${ipdyn};then run addip_dyn;"		\
+		"else run addip_sta;fi\0"				\
+	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
+	"addtty=setenv bootargs ${bootargs}"				\
+		" console=${consoledev},${baudrate}n8\0"		\
+	"addmisc=setenv bootargs ${bootargs} ${misc}\0"		\
+	"addmem=setenv bootargs ${bootargs} mem=${memory}\0"		\
+	"consoledev=ttyS0\0"						\
+	"loadaddr=c0000014\0"						\
+	"memory=32M\0"							\
+	"kernel_addr_r=c0700000\0"					\
+	"hostname=" __stringify(CONFIG_HOSTNAME) "\0"			\
+	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"		\
+	"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/image.ext2\0"	\
+	"flash_self=run ramargs addip addtty addmtd addmisc addmem;"	\
+			"bootm ${kernel_addr_r}\0"			\
+	"flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;"	\
+		"bootm ${kernel_addr}\0"				\
+	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
+		"run nfsargs addip addtty addmtd addmisc addmem;"	\
+		"bootm ${kernel_addr_r}\0"				\
+	"net_rfsb=tftp ${kernel_addr_r} ${bootfile}; "			\
+		"run rfsbargs addip addtty addmtd addmisc addmem; "	\
+		"bootm ${kernel_addr_r}\0"				\
+	"net_testrfs=tftp ${kernel_addr_r} ${bootfile}; "		\
+		"run testrfsargs addip addtty addmtd addmisc addmem; "	\
+		"bootm ${kernel_addr_r}\0"				\
+	"net_self_load=tftp ${kernel_addr_r} ${bootfile};"		\
+		"tftp ${ramdisk_addr_r} ${ramdisk_file};\0"		\
+	"nand_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;"		\
+		"ubifsload ${kernel_addr_r} /boot/uImage;"		\
+		"ubifsumount; run nandargs addip addtty "		\
+		"addmtd addmisc addmem;clrlogo;"			\
+		"bootm ${kernel_addr_r}\0"				\
+	"nand_nandrw=ubi part nand0,${as};ubifsmount ubi:rootfs;"	\
+		"ubifsload ${kernel_addr_r} /boot/uImage;"		\
+		"ubifsumount; run nandrwargs addip addtty "		\
+		"addmtd addmisc addmem;clrlogo;"			\
+		"bootm ${kernel_addr_r}\0"				\
+	"net_nandrw=tftp ${kernel_addr_r} ${bootfile}; run nandrwargs"	\
+		" addip addtty addmtd addmisc addmem;"			\
+		"clrlogo;bootm ${kernel_addr_r}\0"			\
+	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"		\
+	"load_magic=if sf probe 0;then sf "				\
+		"read c0000000 0x10000 0x60000;fi\0"			\
+	"load_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;"		\
+		"if ubifsload c0000014 /boot/u-boot.bin;"		\
+		"then mw c0000008 ${filesize};else echo Error reading"	\
+		" u-boot from nand!;fi\0"				\
+	"load_net=if sf probe 0;then sf read c0000000 0x10000 "	\
+		"0x60000;tftp c0000014 ${u-boot};"			\
+		"mw c0000008 ${filesize};fi\0"				\
+	"upd=if sf probe 0;then sf erase 10000 60000;"			\
+		"sf write c0000000 10000 60000;fi\0"			\
+	"ublupdate=if tftp C0700000 ${ublname};then sf probe 0; "	\
+		"sf erase 0 10000;"					\
+		"sf write 0xc0700000 0 ${filesize};fi\0"		\
+	"ubootupd_net=if run load_net;then echo Updating u-boot;"	\
+		"if run upd; then echo U-Boot updated;"		\
+			"else echo Error updating u-boot !;"		\
+			"echo Board without bootloader !!;"		\
+		"fi;"							\
+		"else echo U-Boot not downloaded..exiting;fi\0"	\
+	"ubootupd_nand=echo run load_magic,run load_nand,run upd;\0"	\
+	"bootcmd=run tempmac;run net_testrfs\0"
+
+#endif /* __CONFIG_H */