Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 213 deletions

diff --git a/qemu/roms/u-boot/include/configs/bf548-ezkit.h b/qemu/roms/u-boot/include/configs/bf548-ezkit.h
deleted file mode 100644
index 1a245a2b8..000000000
--- a/qemu/roms/u-boot/include/configs/bf548-ezkit.h
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * U-boot - Configuration file for BF548 STAMP board
- */
-
-#ifndef __CONFIG_BF548_EZKIT_H__
-#define __CONFIG_BF548_EZKIT_H__
-
-#include <asm/config-pre.h>
-
-
-/*
- * Processor Settings
- */
-#define CONFIG_BFIN_CPU             bf548-0.0
-#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_PARA
-
-
-/*
- * Clock Settings
- *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
- *	SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
- */
-/* CONFIG_CLKIN_HZ is any value in Hz					*/
-#define CONFIG_CLKIN_HZ			25000000
-/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
-/*                                                1 = CLKIN / 2		*/
-#define CONFIG_CLKIN_HALF		0
-/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass	*/
-/*                                                1 = bypass PLL	*/
-#define CONFIG_PLL_BYPASS		0
-/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
-/* Values can range from 0-63 (where 0 means 64)			*/
-#define CONFIG_VCO_MULT			21
-/* CCLK_DIV controls the core clock divider				*/
-/* Values can be 1, 2, 4, or 8 ONLY					*/
-#define CONFIG_CCLK_DIV			1
-/* SCLK_DIV controls the system clock divider				*/
-/* Values can range from 1-15						*/
-#define CONFIG_SCLK_DIV			4
-
-
-/*
- * Memory Settings
- */
-#define CONFIG_MEM_ADD_WDTH	10
-#define CONFIG_MEM_SIZE		64
-
-#define CONFIG_EBIU_DDRCTL0_VAL	0x218A83FE
-#define CONFIG_EBIU_DDRCTL1_VAL	0x20022222
-#define CONFIG_EBIU_DDRCTL2_VAL	0x00000021
-
-/* Default EZ-Kit bank mapping:
- *	Async Bank 0 - 32MB Burst Flash
- *	Async Bank 1 - Ethernet
- *	Async Bank 2 - Nothing
- *	Async Bank 3 - Nothing
- */
-#define CONFIG_EBIU_AMGCTL_VAL	0xFF
-#define CONFIG_EBIU_AMBCTL0_VAL	0x7BB07BB0
-#define CONFIG_EBIU_AMBCTL1_VAL	0xFFC27BB0
-#define CONFIG_EBIU_FCTL_VAL	(BCLK_4)
-#define CONFIG_EBIU_MODE_VAL	(B0MODE_FLASH)
-
-#define CONFIG_SYS_MONITOR_LEN	(1024 * 1024)
-#define CONFIG_SYS_MALLOC_LEN	(768 * 1024)
-
-
-/*
- * Network Settings
- */
-#define ADI_CMDS_NETWORK	1
-#define CONFIG_SMC911X	1
-#define CONFIG_SMC911X_BASE	0x24000000
-#define CONFIG_SMC911X_16_BIT
-#define CONFIG_HOSTNAME		bf548-ezkit
-/* Uncomment next line to use fixed MAC address */
-/* #define CONFIG_ETHADDR	02:80:ad:20:31:e8 */
-
-
-/*
- * Flash Settings
- */
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_BASE		0x20000000
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define CONFIG_SYS_MAX_FLASH_SECT	259
-
-
-/*
- * SPI Settings
- */
-#define CONFIG_BFIN_SPI
-#define CONFIG_ENV_SPI_MAX_HZ	30000000
-#define CONFIG_SF_DEFAULT_SPEED	30000000
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
-
-
-/*
- * Env Storage Settings
- */
-#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_OFFSET	0x10000
-#define CONFIG_ENV_SIZE		0x2000
-#define CONFIG_ENV_SECT_SIZE	0x10000
-#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
-#elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET	0x60000
-#define CONFIG_ENV_SIZE		0x20000
-#else
-/* The BF548-EZKIT uses a top boot flash */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_OFFSET	(0x1000000 - CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
-#define CONFIG_ENV_SECT_SIZE	0x8000
-#endif
-
-/*
- * NAND Settings
- */
-#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
-#define CONFIG_BFIN_NFC_CTL_VAL        0x0033
-#define CONFIG_BFIN_NFC_BOOTROM_ECC
-#define CONFIG_DRIVER_NAND_BFIN
-#define CONFIG_SYS_NAND_BASE           0 /* not actually used */
-#define CONFIG_SYS_MAX_NAND_DEVICE     1
-#endif
-
-/*
- * I2C Settings
- */
-#define CONFIG_BFIN_TWI_I2C	1
-#define CONFIG_HARD_I2C		1
-
-
-/*
- * SATA
- */
-#if !defined(__ADSPBF544__)
-#define CONFIG_LIBATA
-#define CONFIG_SYS_SATA_MAX_DEVICE 1
-#define CONFIG_LBA48
-#define CONFIG_PATA_BFIN
-#define CONFIG_BFIN_ATAPI_BASE_ADDR	0xFFC03800
-#define CONFIG_BFIN_ATA_MODE	XFER_PIO_4
-#endif
-
-
-/*
- * SDH Settings
- */
-#if !defined(__ADSPBF544__)
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_BFIN_SDH
-#endif
-
-
-/*
- * USB Settings
- */
-#if !defined(__ADSPBF544__)
-#define CONFIG_USB
-#define CONFIG_MUSB_HCD
-#define CONFIG_USB_BLACKFIN
-#define CONFIG_USB_STORAGE
-#define CONFIG_MUSB_TIMEOUT 100000
-#endif
-
-
-/*
- * Misc Settings
- */
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_SIZE_LIMIT $$(( 512 * 1024 ))
-#define CONFIG_RTC_BFIN
-#define CONFIG_UART_CONSOLE	1
-#define CONFIG_BFIN_SPI_IMG_SIZE 0x50000
-#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
-
-#define CONFIG_ADI_GPIO2
-
-#undef CONFIG_VIDEO
-#ifdef CONFIG_VIDEO
-#define EASYLOGO_HEADER < asm/bfin_logo_230x230_gzip.h >
-#define CONFIG_DEB_DMA_URGENT
-#endif
-
-/* Define if want to do post memory test */
-#undef CONFIG_POST
-#ifdef CONFIG_POST
-#define CONFIG_POST_BSPEC1_GPIO_LEDS \
-	GPIO_PG6, GPIO_PG7, GPIO_PG8, GPIO_PG9, GPIO_PG10, GPIO_PG11,
-#define CONFIG_POST_BSPEC2_GPIO_BUTTONS \
-	GPIO_PB8, GPIO_PB9, GPIO_PB10, GPIO_PB11
-#define CONFIG_POST_BSPEC2_GPIO_NAMES \
-	13, 12, 11, 10,
-#define CONFIG_SYS_POST_FLASH_START	10
-#define CONFIG_SYS_POST_FLASH_END	127
-#endif
-
-
-/*
- * Pull in common ADI header for remaining command/environment setup
- */
-#include <configs/bfin_adi_common.h>
-
-#endif