Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 238 deletions

diff --git a/qemu/roms/u-boot/include/configs/M5272C3.h b/qemu/roms/u-boot/include/configs/M5272C3.h
deleted file mode 100644
index 4c8412655..000000000
--- a/qemu/roms/u-boot/include/configs/M5272C3.h
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * Configuation settings for the Motorola MC5272C3 board.
- *
- * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef _M5272C3_H
-#define _M5272C3_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_MCF52x2		/* define processor family */
-#define CONFIG_M5272		/* define processor type */
-
-#define CONFIG_MCFTMR
-
-#define CONFIG_MCFUART
-#define CONFIG_SYS_UART_PORT		(0)
-#define CONFIG_BAUDRATE		115200
-
-#undef CONFIG_WATCHDOG
-#define CONFIG_WATCHDOG_TIMEOUT 10000	/* timeout in milliseconds */
-
-#undef CONFIG_MONITOR_IS_IN_RAM	/* define if monitor is started from a pre-loader */
-
-/* Configuration for environment
- * Environment is embedded in u-boot in the second sector of the flash
- */
-#ifndef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_ENV_OFFSET		0x4000
-#define CONFIG_ENV_SECT_SIZE	0x2000
-#define CONFIG_ENV_IS_IN_FLASH	1
-#else
-#define CONFIG_ENV_ADDR		0xffe04000
-#define CONFIG_ENV_SECT_SIZE	0x2000
-#define CONFIG_ENV_IS_IN_FLASH	1
-#endif
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_MISC
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_MEMORY
-
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_LOADB
-
-#define CONFIG_BOOTDELAY	5
-#define CONFIG_MCFFEC
-#ifdef CONFIG_MCFFEC
-#	define CONFIG_MII		1
-#	define CONFIG_MII_INIT		1
-#	define CONFIG_SYS_DISCOVER_PHY
-#	define CONFIG_SYS_RX_ETH_BUFFER	8
-#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-
-#	define CONFIG_SYS_FEC0_PINMUX		0
-#	define CONFIG_SYS_FEC0_MIIBASE		CONFIG_SYS_FEC0_IOBASE
-#	define MCFFEC_TOUT_LOOP		50000
-/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
-#	ifndef CONFIG_SYS_DISCOVER_PHY
-#		define FECDUPLEX	FULL
-#		define FECSPEED		_100BASET
-#	else
-#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#		endif
-#	endif			/* CONFIG_SYS_DISCOVER_PHY */
-#endif
-
-#ifdef CONFIG_MCFFEC
-#	define CONFIG_ETHADDR	00:e0:0c:bc:e5:60
-#	define CONFIG_IPADDR	192.162.1.2
-#	define CONFIG_NETMASK	255.255.255.0
-#	define CONFIG_SERVERIP	192.162.1.1
-#	define CONFIG_GATEWAYIP	192.162.1.1
-#	define CONFIG_OVERWRITE_ETHADDR_ONCE
-#endif				/* CONFIG_MCFFEC */
-
-#define CONFIG_HOSTNAME		M5272C3
-#define CONFIG_EXTRA_ENV_SETTINGS		\
-	"netdev=eth0\0"				\
-	"loadaddr=10000\0"			\
-	"u-boot=u-boot.bin\0"			\
-	"load=tftp ${loadaddr) ${u-boot}\0"	\
-	"upd=run load; run prog\0"		\
-	"prog=prot off ffe00000 ffe3ffff;"	\
-	"era ffe00000 ffe3ffff;"		\
-	"cp.b ${loadaddr} ffe00000 ${filesize};"\
-	"save\0"				\
-	""
-
-#define CONFIG_SYS_PROMPT		"-> "
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size      */
-#else
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size      */
-#endif
-
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args   */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
-#define CONFIG_SYS_LOAD_ADDR		0x20000
-#define CONFIG_SYS_MEMTEST_START	0x400
-#define CONFIG_SYS_MEMTEST_END		0x380000
-#define CONFIG_SYS_CLK			66000000
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-#define CONFIG_SYS_MBAR		0x10000000	/* Register Base Addrs */
-#define CONFIG_SYS_SCR			0x0003
-#define CONFIG_SYS_SPR			0xffff
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
-#define CONFIG_SYS_INIT_RAM_SIZE	0x1000	/* Size of used area in internal SRAM    */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_SDRAM_SIZE		4	/* SDRAM size in MB */
-#define CONFIG_SYS_FLASH_BASE		0xffe00000
-
-#ifdef	CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_SYS_MONITOR_BASE	0x20000
-#else
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN		0x20000
-#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
-#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization ??
- */
-#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
-
-/*
- * FLASH organization
- */
-#define CONFIG_SYS_FLASH_CFI
-#ifdef CONFIG_SYS_FLASH_CFI
-#	define CONFIG_FLASH_CFI_DRIVER	1
-#	define CONFIG_SYS_FLASH_SIZE		0x800000	/* Max size that the board might have */
-#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
-#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
-#endif
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16
-
-#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - 8)
-#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - 4)
-#define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINV | CF_CACR_INVI)
-#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
-					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
-					 CF_ACR_EN | CF_ACR_SM_ALL)
-#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_CENB | CF_CACR_CINV | \
-					 CF_CACR_DISD | CF_CACR_INVI | \
-					 CF_CACR_CEIB | CF_CACR_DCM | \
-					 CF_CACR_EUSP)
-
-/*-----------------------------------------------------------------------
- * Memory bank definitions
- */
-#define CONFIG_SYS_BR0_PRELIM		0xFFE00201
-#define CONFIG_SYS_OR0_PRELIM		0xFFE00014
-#define CONFIG_SYS_BR1_PRELIM		0
-#define CONFIG_SYS_OR1_PRELIM		0
-#define CONFIG_SYS_BR2_PRELIM		0x30000001
-#define CONFIG_SYS_OR2_PRELIM		0xFFF80000
-#define CONFIG_SYS_BR3_PRELIM		0
-#define CONFIG_SYS_OR3_PRELIM		0
-#define CONFIG_SYS_BR4_PRELIM		0
-#define CONFIG_SYS_OR4_PRELIM		0
-#define CONFIG_SYS_BR5_PRELIM		0
-#define CONFIG_SYS_OR5_PRELIM		0
-#define CONFIG_SYS_BR6_PRELIM		0
-#define CONFIG_SYS_OR6_PRELIM		0
-#define CONFIG_SYS_BR7_PRELIM		0x00000701
-#define CONFIG_SYS_OR7_PRELIM		0xFFC0007C
-
-/*-----------------------------------------------------------------------
- * Port configuration
- */
-#define CONFIG_SYS_PACNT		0x00000000
-#define CONFIG_SYS_PADDR		0x0000
-#define CONFIG_SYS_PADAT		0x0000
-#define CONFIG_SYS_PBCNT		0x55554155	/* Ethernet/UART configuration */
-#define CONFIG_SYS_PBDDR		0x0000
-#define CONFIG_SYS_PBDAT		0x0000
-#define CONFIG_SYS_PDCNT		0x00000000
-#endif				/* _M5272C3_H */