Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 188 deletions

diff --git a/qemu/roms/u-boot/include/configs/M5249EVB.h b/qemu/roms/u-boot/include/configs/M5249EVB.h
deleted file mode 100644
index ae4fe45fc..000000000
--- a/qemu/roms/u-boot/include/configs/M5249EVB.h
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * Configuation settings for the esd TASREG board.
- *
- * (C) Copyright 2004
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef _M5249EVB_H
-#define _M5249EVB_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_MCF52x2			/* define processor family */
-#define CONFIG_M5249			/* define processor type */
-
-#define CONFIG_MCFTMR
-
-#define CONFIG_MCFUART
-#define CONFIG_SYS_UART_PORT		(0)
-#define CONFIG_BAUDRATE		115200
-
-#undef  CONFIG_WATCHDOG
-
-#undef CONFIG_MONITOR_IS_IN_RAM		/* no pre-loader required!!! ;-) */
-
-/*
- * BOOTP options
- */
-#undef CONFIG_BOOTP_BOOTFILESIZE
-#undef CONFIG_BOOTP_BOOTPATH
-#undef CONFIG_BOOTP_GATEWAY
-#undef CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_CACHE
-#undef CONFIG_CMD_NET
-
-#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size	*/
-#else
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
-#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup	*/
-#define CONFIG_AUTO_COMPLETE	1	/* add autocompletion support	*/
-#define CONFIG_LOOPW		1	/* enable loopw command	*/
-#define CONFIG_MX_CYCLIC	1	/* enable mdc/mwc commands	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x200000	/* default load address */
-
-#define CONFIG_SYS_MEMTEST_START	0x400
-#define CONFIG_SYS_MEMTEST_END		0x380000
-
-/*
- * Clock configuration: enable only one of the following options
- */
-
-#undef  CONFIG_SYS_PLL_BYPASS				/* bypass PLL for test purpose */
-#define CONFIG_SYS_FAST_CLK		1		/* MCF5249 can run at 140MHz   */
-#define	CONFIG_SYS_CLK			132025600	/* MCF5249 can run at 140MHz   */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-#define CONFIG_SYS_MBAR		0x10000000	/* Register Base Addrs */
-#define	CONFIG_SYS_MBAR2		0x80000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
-#define CONFIG_SYS_INIT_RAM_SIZE	0x1000	/* Size of used area in internal SRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_OFFSET		0x4000	/* Address of Environment Sector*/
-#define CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
-#define CONFIG_ENV_SECT_SIZE	0x2000 /* see README - env sector total size	*/
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_SDRAM_SIZE		16		/* SDRAM size in MB */
-#define CONFIG_SYS_FLASH_BASE		(CONFIG_SYS_CS0_BASE)
-
-#if 0 /* test-only */
-#define CONFIG_PRAM		512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */
-#endif
-
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
-
-#define CONFIG_SYS_MONITOR_LEN		0x20000
-#define CONFIG_SYS_MALLOC_LEN		(1 * 1024*1024)	/* Reserve 1 MB for malloc()	*/
-#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization ??
- */
-#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_FLASH_CFI
-#ifdef CONFIG_SYS_FLASH_CFI
-
-#	define CONFIG_FLASH_CFI_DRIVER	1
-#	define CONFIG_SYS_FLASH_SIZE		0x1000000	/* Max size that the board might have */
-#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
-#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
-#	define CONFIG_SYS_FLASH_CHECKSUM
-#	define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
-#endif
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16
-
-#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - 8)
-#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - 4)
-#define CONFIG_SYS_ICACHE_INV		(CF_CACR_DCM)
-#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_FLASH_BASE | \
-					 CF_ADDRMASK(2) | \
-					 CF_ACR_EN | CF_ACR_SM_ALL)
-#define CONFIG_SYS_CACHE_ACR1		(CONFIG_SYS_SDRAM_BASE | \
-					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
-					 CF_ACR_EN | CF_ACR_SM_ALL)
-#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_CENB | CF_CACR_CEIB | \
-					 CF_CACR_DBWE)
-
-/*-----------------------------------------------------------------------
- * Memory bank definitions
- */
-
-/* CS0 - AMD Flash, address 0xffc00000 */
-#define	CONFIG_SYS_CS0_BASE		0xffe00000
-#define	CONFIG_SYS_CS0_CTRL		0x00001980	/* WS=0110, AA=1, PS=10         */
-/** Note: There is a CSMR0/DRAM vector problem, need to disable C/I ***/
-#define	CONFIG_SYS_CS0_MASK		0x003f0021	/* 4MB, AA=0, WP=0, C/I=1, V=1  */
-
-/* CS1 - FPGA, address 0xe0000000 */
-#define	CONFIG_SYS_CS1_BASE		0xe0000000
-#define	CONFIG_SYS_CS1_CTRL		0x00000d80	/* WS=0011, AA=1, PS=10         */
-#define	CONFIG_SYS_CS1_MASK		0x00010001	/* 128kB, AA=0, WP=0, C/I=0, V=1*/
-
-/*-----------------------------------------------------------------------
- * Port configuration
- */
-#define	CONFIG_SYS_GPIO_FUNC		0x00000008	/* Set gpio pins: none          */
-#define	CONFIG_SYS_GPIO1_FUNC		0x00df00f0	/* 36-39(SWITCH),48-52(FPGAs),54*/
-#define	CONFIG_SYS_GPIO_EN		0x00000008	/* Set gpio output enable       */
-#define	CONFIG_SYS_GPIO1_EN		0x00c70000	/* Set gpio output enable       */
-#define	CONFIG_SYS_GPIO_OUT		0x00000008	/* Set outputs to default state */
-#define	CONFIG_SYS_GPIO1_OUT		0x00c70000	/* Set outputs to default state */
-#define CONFIG_SYS_GPIO1_LED		0x00400000	/* user led                     */
-
-#endif	/* M5249 */