Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 248 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/drivers/usb/host/ehci-mx6.c b/qemu/roms/u-boot/drivers/usb/host/ehci-mx6.c
new file mode 100644
index 000000000..c0a557b2a
--- /dev/null
+++ b/qemu/roms/u-boot/drivers/usb/host/ehci-mx6.c
@@ -0,0 +1,248 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <usb.h>
+#include <errno.h>
+#include <linux/compiler.h>
+#include <usb/ehci-fsl.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+#include <asm/imx-common/iomux-v3.h>
+
+#include "ehci.h"
+
+#define USB_OTGREGS_OFFSET	0x000
+#define USB_H1REGS_OFFSET	0x200
+#define USB_H2REGS_OFFSET	0x400
+#define USB_H3REGS_OFFSET	0x600
+#define USB_OTHERREGS_OFFSET	0x800
+
+#define USB_H1_CTRL_OFFSET	0x04
+
+#define USBPHY_CTRL				0x00000030
+#define USBPHY_CTRL_SET				0x00000034
+#define USBPHY_CTRL_CLR				0x00000038
+#define USBPHY_CTRL_TOG				0x0000003c
+
+#define USBPHY_PWD				0x00000000
+#define USBPHY_CTRL_SFTRST			0x80000000
+#define USBPHY_CTRL_CLKGATE			0x40000000
+#define USBPHY_CTRL_ENUTMILEVEL3		0x00008000
+#define USBPHY_CTRL_ENUTMILEVEL2		0x00004000
+#define USBPHY_CTRL_OTG_ID			0x08000000
+
+#define ANADIG_USB2_CHRG_DETECT_EN_B		0x00100000
+#define ANADIG_USB2_CHRG_DETECT_CHK_CHRG_B	0x00080000
+
+#define ANADIG_USB2_PLL_480_CTRL_BYPASS		0x00010000
+#define ANADIG_USB2_PLL_480_CTRL_ENABLE		0x00002000
+#define ANADIG_USB2_PLL_480_CTRL_POWER		0x00001000
+#define ANADIG_USB2_PLL_480_CTRL_EN_USB_CLKS	0x00000040
+
+
+#define UCTRL_OVER_CUR_POL	(1 << 8) /* OTG Polarity of Overcurrent */
+#define UCTRL_OVER_CUR_DIS	(1 << 7) /* Disable OTG Overcurrent Detection */
+
+/* USBCMD */
+#define UCMD_RUN_STOP           (1 << 0) /* controller run/stop */
+#define UCMD_RESET		(1 << 1) /* controller reset */
+
+static const unsigned phy_bases[] = {
+	USB_PHY0_BASE_ADDR,
+	USB_PHY1_BASE_ADDR,
+};
+
+static void usb_internal_phy_clock_gate(int index, int on)
+{
+	void __iomem *phy_reg;
+
+	if (index >= ARRAY_SIZE(phy_bases))
+		return;
+
+	phy_reg = (void __iomem *)phy_bases[index];
+	phy_reg += on ? USBPHY_CTRL_CLR : USBPHY_CTRL_SET;
+	__raw_writel(USBPHY_CTRL_CLKGATE, phy_reg);
+}
+
+static void usb_power_config(int index)
+{
+	struct anatop_regs __iomem *anatop =
+		(struct anatop_regs __iomem *)ANATOP_BASE_ADDR;
+	void __iomem *chrg_detect;
+	void __iomem *pll_480_ctrl_clr;
+	void __iomem *pll_480_ctrl_set;
+
+	switch (index) {
+	case 0:
+		chrg_detect = &anatop->usb1_chrg_detect;
+		pll_480_ctrl_clr = &anatop->usb1_pll_480_ctrl_clr;
+		pll_480_ctrl_set = &anatop->usb1_pll_480_ctrl_set;
+		break;
+	case 1:
+		chrg_detect = &anatop->usb2_chrg_detect;
+		pll_480_ctrl_clr = &anatop->usb2_pll_480_ctrl_clr;
+		pll_480_ctrl_set = &anatop->usb2_pll_480_ctrl_set;
+		break;
+	default:
+		return;
+	}
+	/*
+	 * Some phy and power's special controls
+	 * 1. The external charger detector needs to be disabled
+	 * or the signal at DP will be poor
+	 * 2. The PLL's power and output to usb
+	 * is totally controlled by IC, so the Software only needs
+	 * to enable them at initializtion.
+	 */
+	__raw_writel(ANADIG_USB2_CHRG_DETECT_EN_B |
+		     ANADIG_USB2_CHRG_DETECT_CHK_CHRG_B,
+		     chrg_detect);
+
+	__raw_writel(ANADIG_USB2_PLL_480_CTRL_BYPASS,
+		     pll_480_ctrl_clr);
+
+	__raw_writel(ANADIG_USB2_PLL_480_CTRL_ENABLE |
+		     ANADIG_USB2_PLL_480_CTRL_POWER |
+		     ANADIG_USB2_PLL_480_CTRL_EN_USB_CLKS,
+		     pll_480_ctrl_set);
+}
+
+/* Return 0 : host node, <>0 : device mode */
+static int usb_phy_enable(int index, struct usb_ehci *ehci)
+{
+	void __iomem *phy_reg;
+	void __iomem *phy_ctrl;
+	void __iomem *usb_cmd;
+	u32 val;
+
+	if (index >= ARRAY_SIZE(phy_bases))
+		return 0;
+
+	phy_reg = (void __iomem *)phy_bases[index];
+	phy_ctrl = (void __iomem *)(phy_reg + USBPHY_CTRL);
+	usb_cmd = (void __iomem *)&ehci->usbcmd;
+
+	/* Stop then Reset */
+	val = __raw_readl(usb_cmd);
+	val &= ~UCMD_RUN_STOP;
+	__raw_writel(val, usb_cmd);
+	while (__raw_readl(usb_cmd) & UCMD_RUN_STOP)
+		;
+
+	val = __raw_readl(usb_cmd);
+	val |= UCMD_RESET;
+	__raw_writel(val, usb_cmd);
+	while (__raw_readl(usb_cmd) & UCMD_RESET)
+		;
+
+	/* Reset USBPHY module */
+	val = __raw_readl(phy_ctrl);
+	val |= USBPHY_CTRL_SFTRST;
+	__raw_writel(val, phy_ctrl);
+	udelay(10);
+
+	/* Remove CLKGATE and SFTRST */
+	val = __raw_readl(phy_ctrl);
+	val &= ~(USBPHY_CTRL_CLKGATE | USBPHY_CTRL_SFTRST);
+	__raw_writel(val, phy_ctrl);
+	udelay(10);
+
+	/* Power up the PHY */
+	__raw_writel(0, phy_reg + USBPHY_PWD);
+	/* enable FS/LS device */
+	val = __raw_readl(phy_ctrl);
+	val |= (USBPHY_CTRL_ENUTMILEVEL2 | USBPHY_CTRL_ENUTMILEVEL3);
+	__raw_writel(val, phy_ctrl);
+
+	return val & USBPHY_CTRL_OTG_ID;
+}
+
+/* Base address for this IP block is 0x02184800 */
+struct usbnc_regs {
+	u32	ctrl[4];	/* otg/host1-3 */
+	u32	uh2_hsic_ctrl;
+	u32	uh3_hsic_ctrl;
+	u32	otg_phy_ctrl_0;
+	u32	uh1_phy_ctrl_0;
+};
+
+static void usb_oc_config(int index)
+{
+	struct usbnc_regs *usbnc = (struct usbnc_regs *)(USBOH3_USB_BASE_ADDR +
+			USB_OTHERREGS_OFFSET);
+	void __iomem *ctrl = (void __iomem *)(&usbnc->ctrl[index]);
+	u32 val;
+
+	val = __raw_readl(ctrl);
+#if CONFIG_MACH_TYPE == MACH_TYPE_MX6Q_ARM2
+	/* mx6qarm2 seems to required a different setting*/
+	val &= ~UCTRL_OVER_CUR_POL;
+#else
+	val |= UCTRL_OVER_CUR_POL;
+#endif
+	__raw_writel(val, ctrl);
+
+	val = __raw_readl(ctrl);
+	val |= UCTRL_OVER_CUR_DIS;
+	__raw_writel(val, ctrl);
+}
+
+int __weak board_ehci_hcd_init(int port)
+{
+	return 0;
+}
+
+int __weak board_ehci_power(int port, int on)
+{
+	return 0;
+}
+
+int ehci_hcd_init(int index, enum usb_init_type init,
+		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+{
+	enum usb_init_type type;
+	struct usb_ehci *ehci = (struct usb_ehci *)(USBOH3_USB_BASE_ADDR +
+		(0x200 * index));
+
+	if (index > 3)
+		return -EINVAL;
+	enable_usboh3_clk(1);
+	mdelay(1);
+
+	/* Do board specific initialization */
+	board_ehci_hcd_init(index);
+
+	usb_power_config(index);
+	usb_oc_config(index);
+	usb_internal_phy_clock_gate(index, 1);
+	type = usb_phy_enable(index, ehci) ? USB_INIT_DEVICE : USB_INIT_HOST;
+
+	*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
+	*hcor = (struct ehci_hcor *)((uint32_t)*hccr +
+			HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
+
+	if ((type == init) || (type == USB_INIT_DEVICE))
+		board_ehci_power(index, (type == USB_INIT_DEVICE) ? 0 : 1);
+	if (type != init)
+		return -ENODEV;
+	if (type == USB_INIT_DEVICE)
+		return 0;
+	setbits_le32(&ehci->usbmode, CM_HOST);
+	__raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
+	setbits_le32(&ehci->portsc, USB_EN);
+
+	mdelay(10);
+
+	return 0;
+}
+
+int ehci_hcd_stop(int index)
+{
+	return 0;
+}