Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 180 deletions

diff --git a/qemu/roms/u-boot/drivers/rtc/ds1307.c b/qemu/roms/u-boot/drivers/rtc/ds1307.c
deleted file mode 100644
index 1a2bad3c5..000000000
--- a/qemu/roms/u-boot/drivers/rtc/ds1307.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * (C) Copyright 2001, 2002, 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * Keith Outwater, keith_outwater@mvis.com`
- * Steven Scholz, steven.scholz@imc-berlin.de
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Date & Time support (no alarms) for Dallas Semiconductor (now Maxim)
- * DS1307 and DS1338 Real Time Clock (RTC).
- *
- * based on ds1337.c
- */
-
-#include <common.h>
-#include <command.h>
-#include <rtc.h>
-#include <i2c.h>
-
-#if defined(CONFIG_CMD_DATE)
-
-/*---------------------------------------------------------------------*/
-#undef DEBUG_RTC
-
-#ifdef DEBUG_RTC
-#define DEBUGR(fmt,args...) printf(fmt ,##args)
-#else
-#define DEBUGR(fmt,args...)
-#endif
-/*---------------------------------------------------------------------*/
-
-#ifndef CONFIG_SYS_I2C_RTC_ADDR
-# define CONFIG_SYS_I2C_RTC_ADDR	0x68
-#endif
-
-#if defined(CONFIG_RTC_DS1307) && (CONFIG_SYS_I2C_SPEED > 100000)
-# error The DS1307 is specified only up to 100kHz!
-#endif
-
-/*
- * RTC register addresses
- */
-#define RTC_SEC_REG_ADDR	0x00
-#define RTC_MIN_REG_ADDR	0x01
-#define RTC_HR_REG_ADDR		0x02
-#define RTC_DAY_REG_ADDR	0x03
-#define RTC_DATE_REG_ADDR	0x04
-#define RTC_MON_REG_ADDR	0x05
-#define RTC_YR_REG_ADDR		0x06
-#define RTC_CTL_REG_ADDR	0x07
-
-#define RTC_SEC_BIT_CH		0x80	/* Clock Halt (in Register 0)   */
-
-#define RTC_CTL_BIT_RS0		0x01	/* Rate select 0                */
-#define RTC_CTL_BIT_RS1		0x02	/* Rate select 1                */
-#define RTC_CTL_BIT_SQWE	0x10	/* Square Wave Enable           */
-#define RTC_CTL_BIT_OUT		0x80	/* Output Control               */
-
-static uchar rtc_read (uchar reg);
-static void rtc_write (uchar reg, uchar val);
-
-/*
- * Get the current time from the RTC
- */
-int rtc_get (struct rtc_time *tmp)
-{
-	int rel = 0;
-	uchar sec, min, hour, mday, wday, mon, year;
-
-	sec = rtc_read (RTC_SEC_REG_ADDR);
-	min = rtc_read (RTC_MIN_REG_ADDR);
-	hour = rtc_read (RTC_HR_REG_ADDR);
-	wday = rtc_read (RTC_DAY_REG_ADDR);
-	mday = rtc_read (RTC_DATE_REG_ADDR);
-	mon = rtc_read (RTC_MON_REG_ADDR);
-	year = rtc_read (RTC_YR_REG_ADDR);
-
-	DEBUGR ("Get RTC year: %02x mon: %02x mday: %02x wday: %02x "
-		"hr: %02x min: %02x sec: %02x\n",
-		year, mon, mday, wday, hour, min, sec);
-
-	if (sec & RTC_SEC_BIT_CH) {
-		printf ("### Warning: RTC oscillator has stopped\n");
-		/* clear the CH flag */
-		rtc_write (RTC_SEC_REG_ADDR,
-			   rtc_read (RTC_SEC_REG_ADDR) & ~RTC_SEC_BIT_CH);
-		rel = -1;
-	}
-
-	tmp->tm_sec  = bcd2bin (sec & 0x7F);
-	tmp->tm_min  = bcd2bin (min & 0x7F);
-	tmp->tm_hour = bcd2bin (hour & 0x3F);
-	tmp->tm_mday = bcd2bin (mday & 0x3F);
-	tmp->tm_mon  = bcd2bin (mon & 0x1F);
-	tmp->tm_year = bcd2bin (year) + ( bcd2bin (year) >= 70 ? 1900 : 2000);
-	tmp->tm_wday = bcd2bin ((wday - 1) & 0x07);
-	tmp->tm_yday = 0;
-	tmp->tm_isdst= 0;
-
-	DEBUGR ("Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
-		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
-		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-
-	return rel;
-}
-
-
-/*
- * Set the RTC
- */
-int rtc_set (struct rtc_time *tmp)
-{
-	DEBUGR ("Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
-		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
-		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-
-	if (tmp->tm_year < 1970 || tmp->tm_year > 2069)
-		printf("WARNING: year should be between 1970 and 2069!\n");
-
-	rtc_write (RTC_YR_REG_ADDR, bin2bcd (tmp->tm_year % 100));
-	rtc_write (RTC_MON_REG_ADDR, bin2bcd (tmp->tm_mon));
-	rtc_write (RTC_DAY_REG_ADDR, bin2bcd (tmp->tm_wday + 1));
-	rtc_write (RTC_DATE_REG_ADDR, bin2bcd (tmp->tm_mday));
-	rtc_write (RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour));
-	rtc_write (RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min));
-	rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec));
-
-	return 0;
-}
-
-
-/*
- * Reset the RTC. We setting the date back to 1970-01-01.
- * We also enable the oscillator output on the SQW/OUT pin and program
- * it for 32,768 Hz output. Note that according to the datasheet, turning
- * on the square wave output increases the current drain on the backup
- * battery to something between 480nA and 800nA.
- */
-void rtc_reset (void)
-{
-	struct rtc_time tmp;
-
-	rtc_write (RTC_SEC_REG_ADDR, 0x00);	/* clearing Clock Halt	*/
-	rtc_write (RTC_CTL_REG_ADDR, RTC_CTL_BIT_SQWE | RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS0);
-
-	tmp.tm_year = 1970;
-	tmp.tm_mon = 1;
-	tmp.tm_mday= 1;
-	tmp.tm_hour = 0;
-	tmp.tm_min = 0;
-	tmp.tm_sec = 0;
-
-	rtc_set(&tmp);
-
-	printf ( "RTC:   %4d-%02d-%02d %2d:%02d:%02d UTC\n",
-		tmp.tm_year, tmp.tm_mon, tmp.tm_mday,
-		tmp.tm_hour, tmp.tm_min, tmp.tm_sec);
-
-	return;
-}
-
-
-/*
- * Helper functions
- */
-
-static
-uchar rtc_read (uchar reg)
-{
-	return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
-}
-
-
-static void rtc_write (uchar reg, uchar val)
-{
-	i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
-}
-#endif