Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 101 deletions

diff --git a/qemu/roms/u-boot/drivers/power/twl4030.c b/qemu/roms/u-boot/drivers/power/twl4030.c
deleted file mode 100644
index 3e5031046..000000000
--- a/qemu/roms/u-boot/drivers/power/twl4030.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Copyright (c) 2009 Wind River Systems, Inc.
- * Tom Rix <Tom.Rix at windriver.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * twl4030_power_reset_init is derived from code on omapzoom,
- * git://git.omapzoom.com/repo/u-boot.git
- *
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
- *
- * twl4030_power_init is from cpu/omap3/common.c, power_init_r
- *
- * (C) Copyright 2004-2008
- * Texas Instruments, <www.ti.com>
- *
- * Author :
- *	Sunil Kumar <sunilsaini05 at gmail.com>
- *	Shashi Ranjan <shashiranjanmca05 at gmail.com>
- *
- * Derived from Beagle Board and 3430 SDP code by
- *	Richard Woodruff <r-woodruff2 at ti.com>
- *	Syed Mohammed Khasim <khasim at ti.com>
- */
-
-#include <twl4030.h>
-
-/*
- * Power Reset
- */
-void twl4030_power_reset_init(void)
-{
-	u8 val = 0;
-	if (twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER,
-				TWL4030_PM_MASTER_P1_SW_EVENTS, &val)) {
-		printf("Error:TWL4030: failed to read the power register\n");
-		printf("Could not initialize hardware reset\n");
-	} else {
-		val |= TWL4030_PM_MASTER_SW_EVENTS_STOPON_PWRON;
-		if (twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
-					 TWL4030_PM_MASTER_P1_SW_EVENTS, val)) {
-			printf("Error:TWL4030: failed to write the power register\n");
-			printf("Could not initialize hardware reset\n");
-		}
-	}
-}
-
-/*
- * Set Device Group and Voltage
- */
-void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val,
-				u8 dev_grp, u8 dev_grp_sel)
-{
-	int ret;
-
-	/* Select the Voltage */
-	ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, vsel_reg,
-				   vsel_val);
-	if (ret != 0) {
-		printf("Could not write vsel to reg %02x (%d)\n",
-			vsel_reg, ret);
-		return;
-	}
-
-	/* Select the Device Group (enable the supply if dev_grp_sel != 0) */
-	ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, dev_grp,
-				   dev_grp_sel);
-	if (ret != 0)
-		printf("Could not write grp_sel to reg %02x (%d)\n",
-			dev_grp, ret);
-}
-
-void twl4030_power_init(void)
-{
-	/* set VAUX3 to 2.8V */
-	twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX3_DEDICATED,
-				TWL4030_PM_RECEIVER_VAUX3_VSEL_28,
-				TWL4030_PM_RECEIVER_VAUX3_DEV_GRP,
-				TWL4030_PM_RECEIVER_DEV_GRP_P1);
-
-	/* set VPLL2 to 1.8V */
-	twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VPLL2_DEDICATED,
-				TWL4030_PM_RECEIVER_VPLL2_VSEL_18,
-				TWL4030_PM_RECEIVER_VPLL2_DEV_GRP,
-				TWL4030_PM_RECEIVER_DEV_GRP_ALL);
-
-	/* set VDAC to 1.8V */
-	twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VDAC_DEDICATED,
-				TWL4030_PM_RECEIVER_VDAC_VSEL_18,
-				TWL4030_PM_RECEIVER_VDAC_DEV_GRP,
-				TWL4030_PM_RECEIVER_DEV_GRP_P1);
-}
-
-void twl4030_power_mmc_init(void)
-{
-	/* Set VMMC1 to 3.15 Volts */
-	twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC1_DEDICATED,
-				TWL4030_PM_RECEIVER_VMMC1_VSEL_32,
-				TWL4030_PM_RECEIVER_VMMC1_DEV_GRP,
-				TWL4030_PM_RECEIVER_DEV_GRP_P1);
-}