Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 56 deletions

diff --git a/qemu/roms/u-boot/doc/README.bitbangMII b/qemu/roms/u-boot/doc/README.bitbangMII
deleted file mode 100644
index 0a2fa48a5..000000000
--- a/qemu/roms/u-boot/doc/README.bitbangMII
+++ /dev/null
@@ -1,56 +0,0 @@
-This patch rewrites the miiphybb ( Bit-banged MII bus driver ) in order to
-support an arbitrary number of mii buses. This feature is useful when your
-board uses different mii buses for different phys and all (or a part) of these
-buses are implemented via bit-banging mode.
-
-The driver requires that the following macros should be defined into the board
-configuration file:
-
-CONFIG_BITBANGMII	- Enable the miiphybb driver
-CONFIG_BITBANGMII_MULTI - Enable the multi bus support
-
-If the CONFIG_BITBANGMII_MULTI is not defined, the board's config file needs
-to define at least the following macros:
-
-MII_INIT      - Generic code to enable the MII bus (optional)
-MDIO_DECLARE  - Declaration needed to access to the MDIO pin (optional)
-MDIO_ACTIVE   - Activate the MDIO pin as out pin
-MDIO_TRISTATE - Activate the MDIO pin as input/tristate pin
-MDIO_READ     - Read the MDIO pin
-MDIO(v)       - Write v on the MDIO pin
-MDC_DECLARE   - Declaration needed to access to the MDC pin (optional)
-MDC(v)	      - Write v on the MDC pin
-
-The previous macros make the driver compatible with the previous version
-(that didn't support the multi-bus).
-
-When the CONFIG_BITBANGMII_MULTI is also defined, the board code needs to fill
-the bb_miiphy_buses[] array with a record for each required bus and declare
-the bb_miiphy_buses_num variable with the number of mii buses.
-The record (struct bb_miiphy_bus) has the following fields/callbacks (see
-miiphy.h for details):
-
-char name[]	       - The symbolic name that must be equal to the MII bus
-			 registered name
-int (*init)()	       - Initialization function called at startup time (just
-			 before the Ethernet initialization)
-int (*mdio_active)()   - Activate the MDIO pin as output
-int (*mdio_tristate)() - Activate the MDIO pin as input/tristate pin
-int (*set_mdio)()      - Write the MDIO pin
-int (*get_mdio)()      - Read the MDIO pin
-int (*set_mdc)()       - Write the MDC pin
-int (*delay)()	       - Delay function
-void *priv	       - Private data used by board specific code
-
-The board code will look like:
-
-struct bb_miiphy_bus bb_miiphy_buses[] = {
- { .name = "miibus#1", .init = b1_init, .mdio_active = b1_mdio_active, ... },
- { .name = "miibus#2", .init = b2_init, .mdio_active = b2_mdio_active, ... },
- ...
-};
-int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) /
-			  sizeof(bb_miiphy_buses[0]);
-
-2009 Industrie Dial Face S.p.A.
-     Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>