Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 679 deletions

diff --git a/qemu/roms/u-boot/common/cmd_usb.c b/qemu/roms/u-boot/common/cmd_usb.c
deleted file mode 100644
index 2519497da..000000000
--- a/qemu/roms/u-boot/common/cmd_usb.c
+++ /dev/null
@@ -1,679 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland
- *
- * Most of this source has been derived from the Linux USB
- * project.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/byteorder.h>
-#include <asm/unaligned.h>
-#include <part.h>
-#include <usb.h>
-
-#ifdef CONFIG_USB_STORAGE
-static int usb_stor_curr_dev = -1; /* current device */
-#endif
-#ifdef CONFIG_USB_HOST_ETHER
-static int usb_ether_curr_dev = -1; /* current ethernet device */
-#endif
-
-/* some display routines (info command) */
-static char *usb_get_class_desc(unsigned char dclass)
-{
-	switch (dclass) {
-	case USB_CLASS_PER_INTERFACE:
-		return "See Interface";
-	case USB_CLASS_AUDIO:
-		return "Audio";
-	case USB_CLASS_COMM:
-		return "Communication";
-	case USB_CLASS_HID:
-		return "Human Interface";
-	case USB_CLASS_PRINTER:
-		return "Printer";
-	case USB_CLASS_MASS_STORAGE:
-		return "Mass Storage";
-	case USB_CLASS_HUB:
-		return "Hub";
-	case USB_CLASS_DATA:
-		return "CDC Data";
-	case USB_CLASS_VENDOR_SPEC:
-		return "Vendor specific";
-	default:
-		return "";
-	}
-}
-
-static void usb_display_class_sub(unsigned char dclass, unsigned char subclass,
-				  unsigned char proto)
-{
-	switch (dclass) {
-	case USB_CLASS_PER_INTERFACE:
-		printf("See Interface");
-		break;
-	case USB_CLASS_HID:
-		printf("Human Interface, Subclass: ");
-		switch (subclass) {
-		case USB_SUB_HID_NONE:
-			printf("None");
-			break;
-		case USB_SUB_HID_BOOT:
-			printf("Boot ");
-			switch (proto) {
-			case USB_PROT_HID_NONE:
-				printf("None");
-				break;
-			case USB_PROT_HID_KEYBOARD:
-				printf("Keyboard");
-				break;
-			case USB_PROT_HID_MOUSE:
-				printf("Mouse");
-				break;
-			default:
-				printf("reserved");
-				break;
-			}
-			break;
-		default:
-			printf("reserved");
-			break;
-		}
-		break;
-	case USB_CLASS_MASS_STORAGE:
-		printf("Mass Storage, ");
-		switch (subclass) {
-		case US_SC_RBC:
-			printf("RBC ");
-			break;
-		case US_SC_8020:
-			printf("SFF-8020i (ATAPI)");
-			break;
-		case US_SC_QIC:
-			printf("QIC-157 (Tape)");
-			break;
-		case US_SC_UFI:
-			printf("UFI");
-			break;
-		case US_SC_8070:
-			printf("SFF-8070");
-			break;
-		case US_SC_SCSI:
-			printf("Transp. SCSI");
-			break;
-		default:
-			printf("reserved");
-			break;
-		}
-		printf(", ");
-		switch (proto) {
-		case US_PR_CB:
-			printf("Command/Bulk");
-			break;
-		case US_PR_CBI:
-			printf("Command/Bulk/Int");
-			break;
-		case US_PR_BULK:
-			printf("Bulk only");
-			break;
-		default:
-			printf("reserved");
-			break;
-		}
-		break;
-	default:
-		printf("%s", usb_get_class_desc(dclass));
-		break;
-	}
-}
-
-static void usb_display_string(struct usb_device *dev, int index)
-{
-	ALLOC_CACHE_ALIGN_BUFFER(char, buffer, 256);
-
-	if (index != 0) {
-		if (usb_string(dev, index, &buffer[0], 256) > 0)
-			printf("String: \"%s\"", buffer);
-	}
-}
-
-static void usb_display_desc(struct usb_device *dev)
-{
-	if (dev->descriptor.bDescriptorType == USB_DT_DEVICE) {
-		printf("%d: %s,  USB Revision %x.%x\n", dev->devnum,
-		usb_get_class_desc(dev->config.if_desc[0].desc.bInterfaceClass),
-				   (dev->descriptor.bcdUSB>>8) & 0xff,
-				   dev->descriptor.bcdUSB & 0xff);
-
-		if (strlen(dev->mf) || strlen(dev->prod) ||
-		    strlen(dev->serial))
-			printf(" - %s %s %s\n", dev->mf, dev->prod,
-				dev->serial);
-		if (dev->descriptor.bDeviceClass) {
-			printf(" - Class: ");
-			usb_display_class_sub(dev->descriptor.bDeviceClass,
-					      dev->descriptor.bDeviceSubClass,
-					      dev->descriptor.bDeviceProtocol);
-			printf("\n");
-		} else {
-			printf(" - Class: (from Interface) %s\n",
-			       usb_get_class_desc(
-				dev->config.if_desc[0].desc.bInterfaceClass));
-		}
-		printf(" - PacketSize: %d  Configurations: %d\n",
-			dev->descriptor.bMaxPacketSize0,
-			dev->descriptor.bNumConfigurations);
-		printf(" - Vendor: 0x%04x  Product 0x%04x Version %d.%d\n",
-			dev->descriptor.idVendor, dev->descriptor.idProduct,
-			(dev->descriptor.bcdDevice>>8) & 0xff,
-			dev->descriptor.bcdDevice & 0xff);
-	}
-
-}
-
-static void usb_display_conf_desc(struct usb_config_descriptor *config,
-				  struct usb_device *dev)
-{
-	printf("   Configuration: %d\n", config->bConfigurationValue);
-	printf("   - Interfaces: %d %s%s%dmA\n", config->bNumInterfaces,
-	       (config->bmAttributes & 0x40) ? "Self Powered " : "Bus Powered ",
-	       (config->bmAttributes & 0x20) ? "Remote Wakeup " : "",
-		config->bMaxPower*2);
-	if (config->iConfiguration) {
-		printf("   - ");
-		usb_display_string(dev, config->iConfiguration);
-		printf("\n");
-	}
-}
-
-static void usb_display_if_desc(struct usb_interface_descriptor *ifdesc,
-				struct usb_device *dev)
-{
-	printf("     Interface: %d\n", ifdesc->bInterfaceNumber);
-	printf("     - Alternate Setting %d, Endpoints: %d\n",
-		ifdesc->bAlternateSetting, ifdesc->bNumEndpoints);
-	printf("     - Class ");
-	usb_display_class_sub(ifdesc->bInterfaceClass,
-		ifdesc->bInterfaceSubClass, ifdesc->bInterfaceProtocol);
-	printf("\n");
-	if (ifdesc->iInterface) {
-		printf("     - ");
-		usb_display_string(dev, ifdesc->iInterface);
-		printf("\n");
-	}
-}
-
-static void usb_display_ep_desc(struct usb_endpoint_descriptor *epdesc)
-{
-	printf("     - Endpoint %d %s ", epdesc->bEndpointAddress & 0xf,
-		(epdesc->bEndpointAddress & 0x80) ? "In" : "Out");
-	switch ((epdesc->bmAttributes & 0x03)) {
-	case 0:
-		printf("Control");
-		break;
-	case 1:
-		printf("Isochronous");
-		break;
-	case 2:
-		printf("Bulk");
-		break;
-	case 3:
-		printf("Interrupt");
-		break;
-	}
-	printf(" MaxPacket %d", get_unaligned(&epdesc->wMaxPacketSize));
-	if ((epdesc->bmAttributes & 0x03) == 0x3)
-		printf(" Interval %dms", epdesc->bInterval);
-	printf("\n");
-}
-
-/* main routine to diasplay the configs, interfaces and endpoints */
-static void usb_display_config(struct usb_device *dev)
-{
-	struct usb_config *config;
-	struct usb_interface *ifdesc;
-	struct usb_endpoint_descriptor *epdesc;
-	int i, ii;
-
-	config = &dev->config;
-	usb_display_conf_desc(&config->desc, dev);
-	for (i = 0; i < config->no_of_if; i++) {
-		ifdesc = &config->if_desc[i];
-		usb_display_if_desc(&ifdesc->desc, dev);
-		for (ii = 0; ii < ifdesc->no_of_ep; ii++) {
-			epdesc = &ifdesc->ep_desc[ii];
-			usb_display_ep_desc(epdesc);
-		}
-	}
-	printf("\n");
-}
-
-static struct usb_device *usb_find_device(int devnum)
-{
-	struct usb_device *dev;
-	int d;
-
-	for (d = 0; d < USB_MAX_DEVICE; d++) {
-		dev = usb_get_dev_index(d);
-		if (dev == NULL)
-			return NULL;
-		if (dev->devnum == devnum)
-			return dev;
-	}
-
-	return NULL;
-}
-
-static inline char *portspeed(int speed)
-{
-	char *speed_str;
-
-	switch (speed) {
-	case USB_SPEED_SUPER:
-		speed_str = "5 Gb/s";
-		break;
-	case USB_SPEED_HIGH:
-		speed_str = "480 Mb/s";
-		break;
-	case USB_SPEED_LOW:
-		speed_str = "1.5 Mb/s";
-		break;
-	default:
-		speed_str = "12 Mb/s";
-		break;
-	}
-
-	return speed_str;
-}
-
-/* shows the device tree recursively */
-static void usb_show_tree_graph(struct usb_device *dev, char *pre)
-{
-	int i, index;
-	int has_child, last_child;
-
-	index = strlen(pre);
-	printf(" %s", pre);
-	/* check if the device has connected children */
-	has_child = 0;
-	for (i = 0; i < dev->maxchild; i++) {
-		if (dev->children[i] != NULL)
-			has_child = 1;
-	}
-	/* check if we are the last one */
-	last_child = 1;
-	if (dev->parent != NULL) {
-		for (i = 0; i < dev->parent->maxchild; i++) {
-			/* search for children */
-			if (dev->parent->children[i] == dev) {
-				/* found our pointer, see if we have a
-				 * little sister
-				 */
-				while (i++ < dev->parent->maxchild) {
-					if (dev->parent->children[i] != NULL) {
-						/* found a sister */
-						last_child = 0;
-						break;
-					} /* if */
-				} /* while */
-			} /* device found */
-		} /* for all children of the parent */
-		printf("\b+-");
-		/* correct last child */
-		if (last_child)
-			pre[index-1] = ' ';
-	} /* if not root hub */
-	else
-		printf(" ");
-	printf("%d ", dev->devnum);
-	pre[index++] = ' ';
-	pre[index++] = has_child ? '|' : ' ';
-	pre[index] = 0;
-	printf(" %s (%s, %dmA)\n", usb_get_class_desc(
-					dev->config.if_desc[0].desc.bInterfaceClass),
-					portspeed(dev->speed),
-					dev->config.desc.bMaxPower * 2);
-	if (strlen(dev->mf) || strlen(dev->prod) || strlen(dev->serial))
-		printf(" %s  %s %s %s\n", pre, dev->mf, dev->prod, dev->serial);
-	printf(" %s\n", pre);
-	if (dev->maxchild > 0) {
-		for (i = 0; i < dev->maxchild; i++) {
-			if (dev->children[i] != NULL) {
-				usb_show_tree_graph(dev->children[i], pre);
-				pre[index] = 0;
-			}
-		}
-	}
-}
-
-/* main routine for the tree command */
-static void usb_show_tree(struct usb_device *dev)
-{
-	char preamble[32];
-
-	memset(preamble, 0, 32);
-	usb_show_tree_graph(dev, &preamble[0]);
-}
-
-static int usb_test(struct usb_device *dev, int port, char* arg)
-{
-	int mode;
-
-	if (port > dev->maxchild) {
-		printf("Device is no hub or does not have %d ports.\n", port);
-		return 1;
-	}
-
-	switch (arg[0]) {
-	case 'J':
-	case 'j':
-		printf("Setting Test_J mode");
-		mode = USB_TEST_MODE_J;
-		break;
-	case 'K':
-	case 'k':
-		printf("Setting Test_K mode");
-		mode = USB_TEST_MODE_K;
-		break;
-	case 'S':
-	case 's':
-		printf("Setting Test_SE0_NAK mode");
-		mode = USB_TEST_MODE_SE0_NAK;
-		break;
-	case 'P':
-	case 'p':
-		printf("Setting Test_Packet mode");
-		mode = USB_TEST_MODE_PACKET;
-		break;
-	case 'F':
-	case 'f':
-		printf("Setting Test_Force_Enable mode");
-		mode = USB_TEST_MODE_FORCE_ENABLE;
-		break;
-	default:
-		printf("Unrecognized test mode: %s\nAvailable modes: "
-		       "J, K, S[E0_NAK], P[acket], F[orce_Enable]\n", arg);
-		return 1;
-	}
-
-	if (port)
-		printf(" on downstream facing port %d...\n", port);
-	else
-		printf(" on upstream facing port...\n");
-
-	if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_FEATURE,
-			    port ? USB_RT_PORT : USB_RECIP_DEVICE,
-			    port ? USB_PORT_FEAT_TEST : USB_FEAT_TEST,
-			    (mode << 8) | port,
-			    NULL, 0, USB_CNTL_TIMEOUT) == -1) {
-		printf("Error during SET_FEATURE.\n");
-		return 1;
-	} else {
-		printf("Test mode successfully set. Use 'usb start' "
-		       "to return to normal operation.\n");
-		return 0;
-	}
-}
-
-
-/******************************************************************************
- * usb boot command intepreter. Derived from diskboot
- */
-#ifdef CONFIG_USB_STORAGE
-static int do_usbboot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	return common_diskboot(cmdtp, "usb", argc, argv);
-}
-#endif /* CONFIG_USB_STORAGE */
-
-
-/******************************************************************************
- * usb command intepreter
- */
-static int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-
-	int i;
-	struct usb_device *dev = NULL;
-	extern char usb_started;
-#ifdef CONFIG_USB_STORAGE
-	block_dev_desc_t *stor_dev;
-#endif
-
-	if (argc < 2)
-		return CMD_RET_USAGE;
-
-	if ((strncmp(argv[1], "reset", 5) == 0) ||
-		 (strncmp(argv[1], "start", 5) == 0)) {
-		bootstage_mark_name(BOOTSTAGE_ID_USB_START, "usb_start");
-		usb_stop();
-		printf("(Re)start USB...\n");
-		if (usb_init() >= 0) {
-#ifdef CONFIG_USB_STORAGE
-			/* try to recognize storage devices immediately */
-			usb_stor_curr_dev = usb_stor_scan(1);
-#endif
-#ifdef CONFIG_USB_HOST_ETHER
-			/* try to recognize ethernet devices immediately */
-			usb_ether_curr_dev = usb_host_eth_scan(1);
-#endif
-#ifdef CONFIG_USB_KEYBOARD
-			drv_usb_kbd_init();
-#endif
-		}
-		return 0;
-	}
-	if (strncmp(argv[1], "stop", 4) == 0) {
-#ifdef CONFIG_USB_KEYBOARD
-		if (argc == 2) {
-			if (usb_kbd_deregister() != 0) {
-				printf("USB not stopped: usbkbd still"
-					" using USB\n");
-				return 1;
-			}
-		} else {
-			/* forced stop, switch console in to serial */
-			console_assign(stdin, "serial");
-			usb_kbd_deregister();
-		}
-#endif
-		printf("stopping USB..\n");
-		usb_stop();
-		return 0;
-	}
-	if (!usb_started) {
-		printf("USB is stopped. Please issue 'usb start' first.\n");
-		return 1;
-	}
-	if (strncmp(argv[1], "tree", 4) == 0) {
-		puts("USB device tree:\n");
-		for (i = 0; i < USB_MAX_DEVICE; i++) {
-			dev = usb_get_dev_index(i);
-			if (dev == NULL)
-				break;
-			if (dev->parent == NULL)
-				usb_show_tree(dev);
-		}
-		return 0;
-	}
-	if (strncmp(argv[1], "inf", 3) == 0) {
-		int d;
-		if (argc == 2) {
-			for (d = 0; d < USB_MAX_DEVICE; d++) {
-				dev = usb_get_dev_index(d);
-				if (dev == NULL)
-					break;
-				usb_display_desc(dev);
-				usb_display_config(dev);
-			}
-			return 0;
-		} else {
-			i = simple_strtoul(argv[2], NULL, 10);
-			printf("config for device %d\n", i);
-			dev = usb_find_device(i);
-			if (dev == NULL) {
-				printf("*** No device available ***\n");
-				return 0;
-			} else {
-				usb_display_desc(dev);
-				usb_display_config(dev);
-			}
-		}
-		return 0;
-	}
-	if (strncmp(argv[1], "test", 4) == 0) {
-		if (argc < 5)
-			return CMD_RET_USAGE;
-		i = simple_strtoul(argv[2], NULL, 10);
-		dev = usb_find_device(i);
-		if (dev == NULL) {
-			printf("Device %d does not exist.\n", i);
-			return 1;
-		}
-		i = simple_strtoul(argv[3], NULL, 10);
-		return usb_test(dev, i, argv[4]);
-	}
-#ifdef CONFIG_USB_STORAGE
-	if (strncmp(argv[1], "stor", 4) == 0)
-		return usb_stor_info();
-
-	if (strncmp(argv[1], "part", 4) == 0) {
-		int devno, ok = 0;
-		if (argc == 2) {
-			for (devno = 0; ; ++devno) {
-				stor_dev = usb_stor_get_dev(devno);
-				if (stor_dev == NULL)
-					break;
-				if (stor_dev->type != DEV_TYPE_UNKNOWN) {
-					ok++;
-					if (devno)
-						printf("\n");
-					debug("print_part of %x\n", devno);
-					print_part(stor_dev);
-				}
-			}
-		} else {
-			devno = simple_strtoul(argv[2], NULL, 16);
-			stor_dev = usb_stor_get_dev(devno);
-			if (stor_dev != NULL &&
-			    stor_dev->type != DEV_TYPE_UNKNOWN) {
-				ok++;
-				debug("print_part of %x\n", devno);
-				print_part(stor_dev);
-			}
-		}
-		if (!ok) {
-			printf("\nno USB devices available\n");
-			return 1;
-		}
-		return 0;
-	}
-	if (strcmp(argv[1], "read") == 0) {
-		if (usb_stor_curr_dev < 0) {
-			printf("no current device selected\n");
-			return 1;
-		}
-		if (argc == 5) {
-			unsigned long addr = simple_strtoul(argv[2], NULL, 16);
-			unsigned long blk  = simple_strtoul(argv[3], NULL, 16);
-			unsigned long cnt  = simple_strtoul(argv[4], NULL, 16);
-			unsigned long n;
-			printf("\nUSB read: device %d block # %ld, count %ld"
-				" ... ", usb_stor_curr_dev, blk, cnt);
-			stor_dev = usb_stor_get_dev(usb_stor_curr_dev);
-			n = stor_dev->block_read(usb_stor_curr_dev, blk, cnt,
-						 (ulong *)addr);
-			printf("%ld blocks read: %s\n", n,
-				(n == cnt) ? "OK" : "ERROR");
-			if (n == cnt)
-				return 0;
-			return 1;
-		}
-	}
-	if (strcmp(argv[1], "write") == 0) {
-		if (usb_stor_curr_dev < 0) {
-			printf("no current device selected\n");
-			return 1;
-		}
-		if (argc == 5) {
-			unsigned long addr = simple_strtoul(argv[2], NULL, 16);
-			unsigned long blk  = simple_strtoul(argv[3], NULL, 16);
-			unsigned long cnt  = simple_strtoul(argv[4], NULL, 16);
-			unsigned long n;
-			printf("\nUSB write: device %d block # %ld, count %ld"
-				" ... ", usb_stor_curr_dev, blk, cnt);
-			stor_dev = usb_stor_get_dev(usb_stor_curr_dev);
-			n = stor_dev->block_write(usb_stor_curr_dev, blk, cnt,
-						(ulong *)addr);
-			printf("%ld blocks write: %s\n", n,
-				(n == cnt) ? "OK" : "ERROR");
-			if (n == cnt)
-				return 0;
-			return 1;
-		}
-	}
-	if (strncmp(argv[1], "dev", 3) == 0) {
-		if (argc == 3) {
-			int dev = (int)simple_strtoul(argv[2], NULL, 10);
-			printf("\nUSB device %d: ", dev);
-			stor_dev = usb_stor_get_dev(dev);
-			if (stor_dev == NULL) {
-				printf("unknown device\n");
-				return 1;
-			}
-			printf("\n    Device %d: ", dev);
-			dev_print(stor_dev);
-			if (stor_dev->type == DEV_TYPE_UNKNOWN)
-				return 1;
-			usb_stor_curr_dev = dev;
-			printf("... is now current device\n");
-			return 0;
-		} else {
-			printf("\nUSB device %d: ", usb_stor_curr_dev);
-			stor_dev = usb_stor_get_dev(usb_stor_curr_dev);
-			dev_print(stor_dev);
-			if (stor_dev->type == DEV_TYPE_UNKNOWN)
-				return 1;
-			return 0;
-		}
-		return 0;
-	}
-#endif /* CONFIG_USB_STORAGE */
-	return CMD_RET_USAGE;
-}
-
-U_BOOT_CMD(
-	usb,	5,	1,	do_usb,
-	"USB sub-system",
-	"start - start (scan) USB controller\n"
-	"usb reset - reset (rescan) USB controller\n"
-	"usb stop [f] - stop USB [f]=force stop\n"
-	"usb tree - show USB device tree\n"
-	"usb info [dev] - show available USB devices\n"
-	"usb test [dev] [port] [mode] - set USB 2.0 test mode\n"
-	"    (specify port 0 to indicate the device's upstream port)\n"
-	"    Available modes: J, K, S[E0_NAK], P[acket], F[orce_Enable]\n"
-#ifdef CONFIG_USB_STORAGE
-	"usb storage - show details of USB storage devices\n"
-	"usb dev [dev] - show or set current USB storage device\n"
-	"usb part [dev] - print partition table of one or all USB storage"
-	"    devices\n"
-	"usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n"
-	"    to memory address `addr'\n"
-	"usb write addr blk# cnt - write `cnt' blocks starting at block `blk#'\n"
-	"    from memory address `addr'"
-#endif /* CONFIG_USB_STORAGE */
-);
-
-
-#ifdef CONFIG_USB_STORAGE
-U_BOOT_CMD(
-	usbboot,	3,	1,	do_usbboot,
-	"boot from USB device",
-	"loadAddr dev:part"
-);
-#endif /* CONFIG_USB_STORAGE */