Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 493 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/common/cmd_pci.c b/qemu/roms/u-boot/common/cmd_pci.c
new file mode 100644
index 000000000..d3e7c089b
--- /dev/null
+++ b/qemu/roms/u-boot/common/cmd_pci.c
@@ -0,0 +1,493 @@
+/*
+ * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Andreas Heppel <aheppel@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * PCI routines
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <pci.h>
+
+/*
+ * Follows routines for the output of infos about devices on PCI bus.
+ */
+
+void pci_header_show(pci_dev_t dev);
+void pci_header_show_brief(pci_dev_t dev);
+
+/*
+ * Subroutine:  pciinfo
+ *
+ * Description: Show information about devices on PCI bus.
+ *				Depending on the define CONFIG_SYS_SHORT_PCI_LISTING
+ *				the output will be more or less exhaustive.
+ *
+ * Inputs:	bus_no		the number of the bus to be scanned.
+ *
+ * Return:      None
+ *
+ */
+void pciinfo(int BusNum, int ShortPCIListing)
+{
+	int Device;
+	int Function;
+	unsigned char HeaderType;
+	unsigned short VendorID;
+	pci_dev_t dev;
+
+	printf("Scanning PCI devices on bus %d\n", BusNum);
+
+	if (ShortPCIListing) {
+		printf("BusDevFun  VendorId   DeviceId   Device Class       Sub-Class\n");
+		printf("_____________________________________________________________\n");
+	}
+
+	for (Device = 0; Device < PCI_MAX_PCI_DEVICES; Device++) {
+		HeaderType = 0;
+		VendorID = 0;
+		for (Function = 0; Function < PCI_MAX_PCI_FUNCTIONS; Function++) {
+			/*
+			 * If this is not a multi-function device, we skip the rest.
+			 */
+			if (Function && !(HeaderType & 0x80))
+				break;
+
+			dev = PCI_BDF(BusNum, Device, Function);
+
+			pci_read_config_word(dev, PCI_VENDOR_ID, &VendorID);
+			if ((VendorID == 0xFFFF) || (VendorID == 0x0000))
+				continue;
+
+			if (!Function) pci_read_config_byte(dev, PCI_HEADER_TYPE, &HeaderType);
+
+			if (ShortPCIListing)
+			{
+				printf("%02x.%02x.%02x   ", BusNum, Device, Function);
+				pci_header_show_brief(dev);
+			}
+			else
+			{
+				printf("\nFound PCI device %02x.%02x.%02x:\n",
+				       BusNum, Device, Function);
+				pci_header_show(dev);
+			}
+	    }
+    }
+}
+
+
+/*
+ * Subroutine:  pci_header_show_brief
+ *
+ * Description: Reads and prints the header of the
+ *		specified PCI device in short form.
+ *
+ * Inputs:	dev      Bus+Device+Function number
+ *
+ * Return:      None
+ *
+ */
+void pci_header_show_brief(pci_dev_t dev)
+{
+	u16 vendor, device;
+	u8 class, subclass;
+
+	pci_read_config_word(dev, PCI_VENDOR_ID, &vendor);
+	pci_read_config_word(dev, PCI_DEVICE_ID, &device);
+	pci_read_config_byte(dev, PCI_CLASS_CODE, &class);
+	pci_read_config_byte(dev, PCI_CLASS_SUB_CODE, &subclass);
+
+	printf("0x%.4x     0x%.4x     %-23s 0x%.2x\n",
+	       vendor, device,
+	       pci_class_str(class), subclass);
+}
+
+/*
+ * Subroutine:  PCI_Header_Show
+ *
+ * Description: Reads the header of the specified PCI device.
+ *
+ * Inputs:		BusDevFunc      Bus+Device+Function number
+ *
+ * Return:      None
+ *
+ */
+void pci_header_show(pci_dev_t dev)
+{
+	u8 _byte, header_type;
+	u16 _word;
+	u32 _dword;
+
+#define PRINT(msg, type, reg) \
+	pci_read_config_##type(dev, reg, &_##type); \
+	printf(msg, _##type)
+
+#define PRINT2(msg, type, reg, func) \
+	pci_read_config_##type(dev, reg, &_##type); \
+	printf(msg, _##type, func(_##type))
+
+	pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
+
+	PRINT ("  vendor ID =                   0x%.4x\n", word, PCI_VENDOR_ID);
+	PRINT ("  device ID =                   0x%.4x\n", word, PCI_DEVICE_ID);
+	PRINT ("  command register =            0x%.4x\n", word, PCI_COMMAND);
+	PRINT ("  status register =             0x%.4x\n", word, PCI_STATUS);
+	PRINT ("  revision ID =                 0x%.2x\n", byte, PCI_REVISION_ID);
+	PRINT2("  class code =                  0x%.2x (%s)\n", byte, PCI_CLASS_CODE,
+								pci_class_str);
+	PRINT ("  sub class code =              0x%.2x\n", byte, PCI_CLASS_SUB_CODE);
+	PRINT ("  programming interface =       0x%.2x\n", byte, PCI_CLASS_PROG);
+	PRINT ("  cache line =                  0x%.2x\n", byte, PCI_CACHE_LINE_SIZE);
+	PRINT ("  latency time =                0x%.2x\n", byte, PCI_LATENCY_TIMER);
+	PRINT ("  header type =                 0x%.2x\n", byte, PCI_HEADER_TYPE);
+	PRINT ("  BIST =                        0x%.2x\n", byte, PCI_BIST);
+	PRINT ("  base address 0 =              0x%.8x\n", dword, PCI_BASE_ADDRESS_0);
+
+	switch (header_type & 0x03) {
+	case PCI_HEADER_TYPE_NORMAL:	/* "normal" PCI device */
+		PRINT ("  base address 1 =              0x%.8x\n", dword, PCI_BASE_ADDRESS_1);
+		PRINT ("  base address 2 =              0x%.8x\n", dword, PCI_BASE_ADDRESS_2);
+		PRINT ("  base address 3 =              0x%.8x\n", dword, PCI_BASE_ADDRESS_3);
+		PRINT ("  base address 4 =              0x%.8x\n", dword, PCI_BASE_ADDRESS_4);
+		PRINT ("  base address 5 =              0x%.8x\n", dword, PCI_BASE_ADDRESS_5);
+		PRINT ("  cardBus CIS pointer =         0x%.8x\n", dword, PCI_CARDBUS_CIS);
+		PRINT ("  sub system vendor ID =        0x%.4x\n", word, PCI_SUBSYSTEM_VENDOR_ID);
+		PRINT ("  sub system ID =               0x%.4x\n", word, PCI_SUBSYSTEM_ID);
+		PRINT ("  expansion ROM base address =  0x%.8x\n", dword, PCI_ROM_ADDRESS);
+		PRINT ("  interrupt line =              0x%.2x\n", byte, PCI_INTERRUPT_LINE);
+		PRINT ("  interrupt pin =               0x%.2x\n", byte, PCI_INTERRUPT_PIN);
+		PRINT ("  min Grant =                   0x%.2x\n", byte, PCI_MIN_GNT);
+		PRINT ("  max Latency =                 0x%.2x\n", byte, PCI_MAX_LAT);
+		break;
+
+	case PCI_HEADER_TYPE_BRIDGE:	/* PCI-to-PCI bridge */
+
+		PRINT ("  base address 1 =              0x%.8x\n", dword, PCI_BASE_ADDRESS_1);
+		PRINT ("  primary bus number =          0x%.2x\n", byte, PCI_PRIMARY_BUS);
+		PRINT ("  secondary bus number =        0x%.2x\n", byte, PCI_SECONDARY_BUS);
+		PRINT ("  subordinate bus number =      0x%.2x\n", byte, PCI_SUBORDINATE_BUS);
+		PRINT ("  secondary latency timer =     0x%.2x\n", byte, PCI_SEC_LATENCY_TIMER);
+		PRINT ("  IO base =                     0x%.2x\n", byte, PCI_IO_BASE);
+		PRINT ("  IO limit =                    0x%.2x\n", byte, PCI_IO_LIMIT);
+		PRINT ("  secondary status =            0x%.4x\n", word, PCI_SEC_STATUS);
+		PRINT ("  memory base =                 0x%.4x\n", word, PCI_MEMORY_BASE);
+		PRINT ("  memory limit =                0x%.4x\n", word, PCI_MEMORY_LIMIT);
+		PRINT ("  prefetch memory base =        0x%.4x\n", word, PCI_PREF_MEMORY_BASE);
+		PRINT ("  prefetch memory limit =       0x%.4x\n", word, PCI_PREF_MEMORY_LIMIT);
+		PRINT ("  prefetch memory base upper =  0x%.8x\n", dword, PCI_PREF_BASE_UPPER32);
+		PRINT ("  prefetch memory limit upper = 0x%.8x\n", dword, PCI_PREF_LIMIT_UPPER32);
+		PRINT ("  IO base upper 16 bits =       0x%.4x\n", word, PCI_IO_BASE_UPPER16);
+		PRINT ("  IO limit upper 16 bits =      0x%.4x\n", word, PCI_IO_LIMIT_UPPER16);
+		PRINT ("  expansion ROM base address =  0x%.8x\n", dword, PCI_ROM_ADDRESS1);
+		PRINT ("  interrupt line =              0x%.2x\n", byte, PCI_INTERRUPT_LINE);
+		PRINT ("  interrupt pin =               0x%.2x\n", byte, PCI_INTERRUPT_PIN);
+		PRINT ("  bridge control =              0x%.4x\n", word, PCI_BRIDGE_CONTROL);
+		break;
+
+	case PCI_HEADER_TYPE_CARDBUS:	/* PCI-to-CardBus bridge */
+
+		PRINT ("  capabilities =                0x%.2x\n", byte, PCI_CB_CAPABILITY_LIST);
+		PRINT ("  secondary status =            0x%.4x\n", word, PCI_CB_SEC_STATUS);
+		PRINT ("  primary bus number =          0x%.2x\n", byte, PCI_CB_PRIMARY_BUS);
+		PRINT ("  CardBus number =              0x%.2x\n", byte, PCI_CB_CARD_BUS);
+		PRINT ("  subordinate bus number =      0x%.2x\n", byte, PCI_CB_SUBORDINATE_BUS);
+		PRINT ("  CardBus latency timer =       0x%.2x\n", byte, PCI_CB_LATENCY_TIMER);
+		PRINT ("  CardBus memory base 0 =       0x%.8x\n", dword, PCI_CB_MEMORY_BASE_0);
+		PRINT ("  CardBus memory limit 0 =      0x%.8x\n", dword, PCI_CB_MEMORY_LIMIT_0);
+		PRINT ("  CardBus memory base 1 =       0x%.8x\n", dword, PCI_CB_MEMORY_BASE_1);
+		PRINT ("  CardBus memory limit 1 =      0x%.8x\n", dword, PCI_CB_MEMORY_LIMIT_1);
+		PRINT ("  CardBus IO base 0 =           0x%.4x\n", word, PCI_CB_IO_BASE_0);
+		PRINT ("  CardBus IO base high 0 =      0x%.4x\n", word, PCI_CB_IO_BASE_0_HI);
+		PRINT ("  CardBus IO limit 0 =          0x%.4x\n", word, PCI_CB_IO_LIMIT_0);
+		PRINT ("  CardBus IO limit high 0 =     0x%.4x\n", word, PCI_CB_IO_LIMIT_0_HI);
+		PRINT ("  CardBus IO base 1 =           0x%.4x\n", word, PCI_CB_IO_BASE_1);
+		PRINT ("  CardBus IO base high 1 =      0x%.4x\n", word, PCI_CB_IO_BASE_1_HI);
+		PRINT ("  CardBus IO limit 1 =          0x%.4x\n", word, PCI_CB_IO_LIMIT_1);
+		PRINT ("  CardBus IO limit high 1 =     0x%.4x\n", word, PCI_CB_IO_LIMIT_1_HI);
+		PRINT ("  interrupt line =              0x%.2x\n", byte, PCI_INTERRUPT_LINE);
+		PRINT ("  interrupt pin =               0x%.2x\n", byte, PCI_INTERRUPT_PIN);
+		PRINT ("  bridge control =              0x%.4x\n", word, PCI_CB_BRIDGE_CONTROL);
+		PRINT ("  subvendor ID =                0x%.4x\n", word, PCI_CB_SUBSYSTEM_VENDOR_ID);
+		PRINT ("  subdevice ID =                0x%.4x\n", word, PCI_CB_SUBSYSTEM_ID);
+		PRINT ("  PC Card 16bit base address =  0x%.8x\n", dword, PCI_CB_LEGACY_MODE_BASE);
+		break;
+
+	default:
+		printf("unknown header\n");
+		break;
+    }
+
+#undef PRINT
+#undef PRINT2
+}
+
+/* Convert the "bus.device.function" identifier into a number.
+ */
+static pci_dev_t get_pci_dev(char* name)
+{
+	char cnum[12];
+	int len, i, iold, n;
+	int bdfs[3] = {0,0,0};
+
+	len = strlen(name);
+	if (len > 8)
+		return -1;
+	for (i = 0, iold = 0, n = 0; i < len; i++) {
+		if (name[i] == '.') {
+			memcpy(cnum, &name[iold], i - iold);
+			cnum[i - iold] = '\0';
+			bdfs[n++] = simple_strtoul(cnum, NULL, 16);
+			iold = i + 1;
+		}
+	}
+	strcpy(cnum, &name[iold]);
+	if (n == 0)
+		n = 1;
+	bdfs[n] = simple_strtoul(cnum, NULL, 16);
+	return PCI_BDF(bdfs[0], bdfs[1], bdfs[2]);
+}
+
+static int pci_cfg_display(pci_dev_t bdf, ulong addr, ulong size, ulong length)
+{
+#define DISP_LINE_LEN	16
+	ulong i, nbytes, linebytes;
+	int rc = 0;
+
+	if (length == 0)
+		length = 0x40 / size; /* Standard PCI configuration space */
+
+	/* Print the lines.
+	 * once, and all accesses are with the specified bus width.
+	 */
+	nbytes = length * size;
+	do {
+		uint	val4;
+		ushort  val2;
+		u_char	val1;
+
+		printf("%08lx:", addr);
+		linebytes = (nbytes>DISP_LINE_LEN)?DISP_LINE_LEN:nbytes;
+		for (i=0; i<linebytes; i+= size) {
+			if (size == 4) {
+				pci_read_config_dword(bdf, addr, &val4);
+				printf(" %08x", val4);
+			} else if (size == 2) {
+				pci_read_config_word(bdf, addr, &val2);
+				printf(" %04x", val2);
+			} else {
+				pci_read_config_byte(bdf, addr, &val1);
+				printf(" %02x", val1);
+			}
+			addr += size;
+		}
+		printf("\n");
+		nbytes -= linebytes;
+		if (ctrlc()) {
+			rc = 1;
+			break;
+		}
+	} while (nbytes > 0);
+
+	return (rc);
+}
+
+static int pci_cfg_write (pci_dev_t bdf, ulong addr, ulong size, ulong value)
+{
+	if (size == 4) {
+		pci_write_config_dword(bdf, addr, value);
+	}
+	else if (size == 2) {
+		ushort val = value & 0xffff;
+		pci_write_config_word(bdf, addr, val);
+	}
+	else {
+		u_char val = value & 0xff;
+		pci_write_config_byte(bdf, addr, val);
+	}
+	return 0;
+}
+
+static int
+pci_cfg_modify (pci_dev_t bdf, ulong addr, ulong size, ulong value, int incrflag)
+{
+	ulong	i;
+	int	nbytes;
+	uint	val4;
+	ushort  val2;
+	u_char	val1;
+
+	/* Print the address, followed by value.  Then accept input for
+	 * the next value.  A non-converted value exits.
+	 */
+	do {
+		printf("%08lx:", addr);
+		if (size == 4) {
+			pci_read_config_dword(bdf, addr, &val4);
+			printf(" %08x", val4);
+		}
+		else if (size == 2) {
+			pci_read_config_word(bdf, addr, &val2);
+			printf(" %04x", val2);
+		}
+		else {
+			pci_read_config_byte(bdf, addr, &val1);
+			printf(" %02x", val1);
+		}
+
+		nbytes = readline (" ? ");
+		if (nbytes == 0 || (nbytes == 1 && console_buffer[0] == '-')) {
+			/* <CR> pressed as only input, don't modify current
+			 * location and move to next. "-" pressed will go back.
+			 */
+			if (incrflag)
+				addr += nbytes ? -size : size;
+			nbytes = 1;
+#ifdef CONFIG_BOOT_RETRY_TIME
+			reset_cmd_timeout(); /* good enough to not time out */
+#endif
+		}
+#ifdef CONFIG_BOOT_RETRY_TIME
+		else if (nbytes == -2) {
+			break;	/* timed out, exit the command	*/
+		}
+#endif
+		else {
+			char *endp;
+			i = simple_strtoul(console_buffer, &endp, 16);
+			nbytes = endp - console_buffer;
+			if (nbytes) {
+#ifdef CONFIG_BOOT_RETRY_TIME
+				/* good enough to not time out
+				 */
+				reset_cmd_timeout();
+#endif
+				pci_cfg_write (bdf, addr, size, i);
+				if (incrflag)
+					addr += size;
+			}
+		}
+	} while (nbytes);
+
+	return 0;
+}
+
+/* PCI Configuration Space access commands
+ *
+ * Syntax:
+ *	pci display[.b, .w, .l] bus.device.function} [addr] [len]
+ *	pci next[.b, .w, .l] bus.device.function [addr]
+ *      pci modify[.b, .w, .l] bus.device.function [addr]
+ *      pci write[.b, .w, .l] bus.device.function addr value
+ */
+static int do_pci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	ulong addr = 0, value = 0, size = 0;
+	pci_dev_t bdf = 0;
+	char cmd = 's';
+
+	if (argc > 1)
+		cmd = argv[1][0];
+
+	switch (cmd) {
+	case 'd':		/* display */
+	case 'n':		/* next */
+	case 'm':		/* modify */
+	case 'w':		/* write */
+		/* Check for a size specification. */
+		size = cmd_get_data_size(argv[1], 4);
+		if (argc > 3)
+			addr = simple_strtoul(argv[3], NULL, 16);
+		if (argc > 4)
+			value = simple_strtoul(argv[4], NULL, 16);
+	case 'h':		/* header */
+		if (argc < 3)
+			goto usage;
+		if ((bdf = get_pci_dev(argv[2])) == -1)
+			return 1;
+		break;
+#ifdef CONFIG_CMD_PCI_ENUM
+	case 'e':
+		break;
+#endif
+	default:		/* scan bus */
+		value = 1; /* short listing */
+		bdf = 0;   /* bus number  */
+		if (argc > 1) {
+			if (argv[argc-1][0] == 'l') {
+				value = 0;
+				argc--;
+			}
+			if (argc > 1)
+				bdf = simple_strtoul(argv[1], NULL, 16);
+		}
+		pciinfo(bdf, value);
+		return 0;
+	}
+
+	switch (argv[1][0]) {
+	case 'h':		/* header */
+		pci_header_show(bdf);
+		return 0;
+	case 'd':		/* display */
+		return pci_cfg_display(bdf, addr, size, value);
+#ifdef CONFIG_CMD_PCI_ENUM
+	case 'e':
+		pci_init();
+		return 0;
+#endif
+	case 'n':		/* next */
+		if (argc < 4)
+			goto usage;
+		return pci_cfg_modify(bdf, addr, size, value, 0);
+	case 'm':		/* modify */
+		if (argc < 4)
+			goto usage;
+		return pci_cfg_modify(bdf, addr, size, value, 1);
+	case 'w':		/* write */
+		if (argc < 5)
+			goto usage;
+		return pci_cfg_write(bdf, addr, size, value);
+	}
+
+	return 1;
+ usage:
+	return CMD_RET_USAGE;
+}
+
+/***************************************************/
+
+#ifdef CONFIG_SYS_LONGHELP
+static char pci_help_text[] =
+	"[bus] [long]\n"
+	"    - short or long list of PCI devices on bus 'bus'\n"
+#ifdef CONFIG_CMD_PCI_ENUM
+	"pci enum\n"
+	"    - re-enumerate PCI buses\n"
+#endif
+	"pci header b.d.f\n"
+	"    - show header of PCI device 'bus.device.function'\n"
+	"pci display[.b, .w, .l] b.d.f [address] [# of objects]\n"
+	"    - display PCI configuration space (CFG)\n"
+	"pci next[.b, .w, .l] b.d.f address\n"
+	"    - modify, read and keep CFG address\n"
+	"pci modify[.b, .w, .l] b.d.f address\n"
+	"    -  modify, auto increment CFG address\n"
+	"pci write[.b, .w, .l] b.d.f address value\n"
+	"    - write to CFG address";
+#endif
+
+U_BOOT_CMD(
+	pci,	5,	1,	do_pci,
+	"list and access PCI Configuration Space", pci_help_text
+);