Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

2 files changed, 0 insertions, 193 deletions

diff --git a/qemu/roms/u-boot/board/ronetix/pm9g45/Makefile b/qemu/roms/u-boot/board/ronetix/pm9g45/Makefile
deleted file mode 100644
index 0a0027990..000000000
--- a/qemu/roms/u-boot/board/ronetix/pm9g45/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stelian@popies.net>
-# Lead Tech Design <www.leadtechdesign.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y += pm9g45.o
diff --git a/qemu/roms/u-boot/board/ronetix/pm9g45/pm9g45.c b/qemu/roms/u-boot/board/ronetix/pm9g45/pm9g45.c
deleted file mode 100644
index 15aa4acd1..000000000
--- a/qemu/roms/u-boot/board/ronetix/pm9g45/pm9g45.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * (C) Copyright 2010
- * Ilko Iliev <iliev@ronetix.at>
- * Asen Dimov <dimov@ronetix.at>
- * Ronetix GmbH <www.ronetix.at>
- *
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/sizes.h>
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <asm/arch/at91sam9_smc.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_matrix.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/clk.h>
-#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
-#include <net.h>
-#endif
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-#ifdef CONFIG_CMD_NAND
-static void pm9g45_nand_hw_init(void)
-{
-	unsigned long csa;
-	struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
-	struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
-	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-
-	/* Enable CS3 */
-	csa = readl(&matrix->ccr[6]) | AT91_MATRIX_CSA_EBI_CS3A;
-	writel(csa, &matrix->ccr[6]);
-
-	/* Configure SMC CS3 for NAND/SmartMedia */
-	writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
-		AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
-		&smc->cs[3].setup);
-
-	writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(3) |
-		AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(2),
-		&smc->cs[3].pulse);
-
-	writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(4),
-		&smc->cs[3].cycle);
-
-	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
-		AT91_SMC_MODE_EXNW_DISABLE |
-		AT91_SMC_MODE_DBW_8 |
-		AT91_SMC_MODE_TDF_CYCLE(3),
-		&smc->cs[3].mode);
-
-	writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
-
-#ifdef CONFIG_SYS_NAND_READY_PIN
-	/* Configure RDY/BSY */
-	gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
-#endif
-
-	/* Enable NandFlash */
-	gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
-}
-#endif
-
-#ifdef CONFIG_MACB
-static void pm9g45_macb_hw_init(void)
-{
-	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-
-	/*
-	 * PD2 enables the 50MHz oscillator for Ethernet PHY
-	 * 1 - enable
-	 * 0 - disable
-	 */
-	at91_set_pio_output(AT91_PIO_PORTD, 2, 1);
-	at91_set_pio_value(AT91_PIO_PORTD, 2, 1); /* 1- enable, 0 - disable */
-
-	/* Enable clock */
-	writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
-
-	/*
-	 * Disable pull-up on:
-	 *	RXDV (PA15) => PHY normal mode (not Test mode)
-	 *	ERX0 (PA12) => PHY ADDR0
-	 *	ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0
-	 *
-	 * PHY has internal pull-down
-	 */
-	at91_set_pio_pullup(AT91_PIO_PORTA, 15, 0);
-	at91_set_pio_pullup(AT91_PIO_PORTA, 12, 0);
-	at91_set_pio_pullup(AT91_PIO_PORTA, 13, 0);
-
-	/* Re-enable pull-up */
-	at91_set_pio_pullup(AT91_PIO_PORTA, 15, 1);
-	at91_set_pio_pullup(AT91_PIO_PORTA, 12, 1);
-	at91_set_pio_pullup(AT91_PIO_PORTA, 13, 1);
-
-	at91_macb_hw_init();
-}
-#endif
-
-int board_early_init_f(void)
-{
-	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-
-	/* Enable clocks for all PIOs */
-	writel((1 << ATMEL_ID_PIOA) |
-		(1 << ATMEL_ID_PIOB) |
-		(1 << ATMEL_ID_PIOC) |
-		(1 << ATMEL_ID_PIODE), &pmc->pcer);
-
-	at91_seriald_hw_init();
-
-	return 0;
-}
-
-int board_init(void)
-{
-	/* arch number of AT91SAM9M10G45EK-Board */
-	gd->bd->bi_arch_number = MACH_TYPE_PM9G45;
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
-#ifdef CONFIG_CMD_NAND
-	pm9g45_nand_hw_init();
-#endif
-
-#ifdef CONFIG_MACB
-	pm9g45_macb_hw_init();
-#endif
-	return 0;
-}
-
-int dram_init(void)
-{
-	/* dram_init must store complete ramsize in gd->ram_size */
-	gd->ram_size = get_ram_size((void *)PHYS_SDRAM,
-				PHYS_SDRAM_SIZE);
-	return 0;
-}
-
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-void reset_phy(void)
-{
-#ifdef CONFIG_MACB
-	/*
-	 * Initialize ethernet HW addr prior to starting Linux,
-	 * needed for nfsroot
-	 */
-	eth_init(gd->bd);
-#endif
-}
-#endif
-
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_MACB
-	rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x01);
-#endif
-	return rc;
-}