Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

7 files changed, 0 insertions, 656 deletions

diff --git a/qemu/roms/u-boot/board/isee/igep0033/Makefile b/qemu/roms/u-boot/board/isee/igep0033/Makefile
deleted file mode 100644
index fc985b45b..000000000
--- a/qemu/roms/u-boot/board/isee/igep0033/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Makefile
-#
-# Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-ifdef CONFIG_SPL_BUILD
-obj-y	+= mux.o
-endif
-
-obj-y	+= board.o
diff --git a/qemu/roms/u-boot/board/isee/igep0033/board.c b/qemu/roms/u-boot/board/isee/igep0033/board.c
deleted file mode 100644
index 9f8fcf2c1..000000000
--- a/qemu/roms/u-boot/board/isee/igep0033/board.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * Board functions for IGEP COM AQUILA based boards
- *
- * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <errno.h>
-#include <spl.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/omap.h>
-#include <asm/arch/ddr_defs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/io.h>
-#include <asm/emif.h>
-#include <asm/gpio.h>
-#include <i2c.h>
-#include <miiphy.h>
-#include <cpsw.h>
-#include "board.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-
-#ifdef CONFIG_SPL_BUILD
-static const struct ddr_data ddr3_data = {
-	.datardsratio0 = K4B2G1646EBIH9_RD_DQS,
-	.datawdsratio0 = K4B2G1646EBIH9_WR_DQS,
-	.datafwsratio0 = K4B2G1646EBIH9_PHY_FIFO_WE,
-	.datawrsratio0 = K4B2G1646EBIH9_PHY_WR_DATA,
-};
-
-static const struct cmd_control ddr3_cmd_ctrl_data = {
-	.cmd0csratio = K4B2G1646EBIH9_RATIO,
-	.cmd0iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
-
-	.cmd1csratio = K4B2G1646EBIH9_RATIO,
-	.cmd1iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
-
-	.cmd2csratio = K4B2G1646EBIH9_RATIO,
-	.cmd2iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
-};
-
-static struct emif_regs ddr3_emif_reg_data = {
-	.sdram_config = K4B2G1646EBIH9_EMIF_SDCFG,
-	.ref_ctrl = K4B2G1646EBIH9_EMIF_SDREF,
-	.sdram_tim1 = K4B2G1646EBIH9_EMIF_TIM1,
-	.sdram_tim2 = K4B2G1646EBIH9_EMIF_TIM2,
-	.sdram_tim3 = K4B2G1646EBIH9_EMIF_TIM3,
-	.zq_config = K4B2G1646EBIH9_ZQ_CFG,
-	.emif_ddr_phy_ctlr_1 = K4B2G1646EBIH9_EMIF_READ_LATENCY,
-};
-
-#define OSC    (V_OSCK/1000000)
-const struct dpll_params dpll_ddr = {
-		400, OSC-1, 1, -1, -1, -1, -1};
-
-const struct dpll_params *get_dpll_ddr_params(void)
-{
-	return &dpll_ddr;
-}
-
-void set_uart_mux_conf(void)
-{
-	enable_uart0_pin_mux();
-}
-
-void set_mux_conf_regs(void)
-{
-	enable_board_pin_mux();
-}
-
-const struct ctrl_ioregs ioregs = {
-	.cm0ioctl		= K4B2G1646EBIH9_IOCTRL_VALUE,
-	.cm1ioctl		= K4B2G1646EBIH9_IOCTRL_VALUE,
-	.cm2ioctl		= K4B2G1646EBIH9_IOCTRL_VALUE,
-	.dt0ioctl		= K4B2G1646EBIH9_IOCTRL_VALUE,
-	.dt1ioctl		= K4B2G1646EBIH9_IOCTRL_VALUE,
-};
-
-void sdram_init(void)
-{
-	config_ddr(400, &ioregs, &ddr3_data,
-		   &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
-}
-#endif
-
-/*
- * Basic board specific setup.  Pinmux has been handled already.
- */
-int board_init(void)
-{
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
-	gpmc_init();
-
-	return 0;
-}
-
-#if defined(CONFIG_DRIVER_TI_CPSW)
-static void cpsw_control(int enabled)
-{
-	/* VTP can be added here */
-
-	return;
-}
-
-static struct cpsw_slave_data cpsw_slaves[] = {
-	{
-		.slave_reg_ofs	= 0x208,
-		.sliver_reg_ofs	= 0xd80,
-		.phy_addr	= 0,
-		.phy_if		= PHY_INTERFACE_MODE_RMII,
-	},
-};
-
-static struct cpsw_platform_data cpsw_data = {
-	.mdio_base		= CPSW_MDIO_BASE,
-	.cpsw_base		= CPSW_BASE,
-	.mdio_div		= 0xff,
-	.channels		= 8,
-	.cpdma_reg_ofs		= 0x800,
-	.slaves			= 1,
-	.slave_data		= cpsw_slaves,
-	.ale_reg_ofs		= 0xd00,
-	.ale_entries		= 1024,
-	.host_port_reg_ofs	= 0x108,
-	.hw_stats_reg_ofs	= 0x900,
-	.bd_ram_ofs		= 0x2000,
-	.mac_control		= (1 << 5),
-	.control		= cpsw_control,
-	.host_port_num		= 0,
-	.version		= CPSW_CTRL_VERSION_2,
-};
-
-int board_eth_init(bd_t *bis)
-{
-	int rv, ret = 0;
-	uint8_t mac_addr[6];
-	uint32_t mac_hi, mac_lo;
-
-	if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
-		/* try reading mac address from efuse */
-		mac_lo = readl(&cdev->macid0l);
-		mac_hi = readl(&cdev->macid0h);
-		mac_addr[0] = mac_hi & 0xFF;
-		mac_addr[1] = (mac_hi & 0xFF00) >> 8;
-		mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
-		mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
-		mac_addr[4] = mac_lo & 0xFF;
-		mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-		if (is_valid_ether_addr(mac_addr))
-			eth_setenv_enetaddr("ethaddr", mac_addr);
-	}
-
-	writel((GMII1_SEL_RMII | RMII1_IO_CLK_EN),
-	       &cdev->miisel);
-
-	rv = cpsw_register(&cpsw_data);
-	if (rv < 0)
-		printf("Error %d registering CPSW switch\n", rv);
-	else
-		ret += rv;
-
-	return ret;
-}
-#endif
diff --git a/qemu/roms/u-boot/board/isee/igep0033/board.h b/qemu/roms/u-boot/board/isee/igep0033/board.h
deleted file mode 100644
index a11d7ab86..000000000
--- a/qemu/roms/u-boot/board/isee/igep0033/board.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * IGEP COM AQUILA boards information header
- *
- * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * We must be able to enable uart0, for initial output. We then have a
- * main pinmux function that can be overridden to enable all other pinmux that
- * is required on the board.
- */
-void enable_uart0_pin_mux(void);
-void enable_board_pin_mux(void);
-#endif
diff --git a/qemu/roms/u-boot/board/isee/igep0033/mux.c b/qemu/roms/u-boot/board/isee/igep0033/mux.c
deleted file mode 100644
index e86277663..000000000
--- a/qemu/roms/u-boot/board/isee/igep0033/mux.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <common.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/mux.h>
-#include <asm/io.h>
-#include <i2c.h>
-#include "board.h"
-
-static struct module_pin_mux uart0_pin_mux[] = {
-	{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* UART0_RXD */
-	{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},		/* UART0_TXD */
-	{-1},
-};
-
-static struct module_pin_mux mmc0_pin_mux[] = {
-	{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT3 */
-	{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT2 */
-	{OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT1 */
-	{OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT0 */
-	{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CLK */
-	{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CMD */
-	{OFFSET(mcasp0_aclkx), (MODE(4) | RXACTIVE)},		/* MMC0_CD */
-	{-1},
-};
-
-static struct module_pin_mux nand_pin_mux[] = {
-	{OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD0 */
-	{OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD1 */
-	{OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD2 */
-	{OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD3 */
-	{OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD4 */
-	{OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD5 */
-	{OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD6 */
-	{OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD7 */
-	{OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
-	{OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)},	/* NAND_WPN */
-	{OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)},		/* NAND_CS0 */
-	{OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)},	/* NAND_ADV_ALE */
-	{OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)},	/* NAND_OE */
-	{OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)},	/* NAND_WEN */
-	{OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)},	/* NAND_BE_CLE */
-	{-1},
-};
-
-static struct module_pin_mux rmii1_pin_mux[] = {
-	{OFFSET(mii1_txen), MODE(1)},			/* RMII1_TXEN */
-	{OFFSET(mii1_rxerr), MODE(1) | RXACTIVE},	/* RMII1_RXERR */
-	{OFFSET(mii1_crs), MODE(1) | RXACTIVE},		/* RMII1_CRS_DV */
-	{OFFSET(mii1_rxd0), MODE(1) | RXACTIVE},	/* RMII1_RXD0 */
-	{OFFSET(mii1_rxd1), MODE(1) | RXACTIVE},	/* RMII1_RXD1 */
-	{OFFSET(mii1_txd0), MODE(1)},			/* RMII1_TXD0 */
-	{OFFSET(mii1_txd1), MODE(1)},			/* RMII1_TXD1 */
-	{OFFSET(rmii1_refclk), MODE(0) | RXACTIVE},	/* RMII1_REF_CLK */
-	{OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},	/* MDIO_DATA */
-	{OFFSET(mdio_clk), MODE(0) | PULLUP_EN},	/* MDIO_CLK */
-	{-1},
-};
-
-void enable_uart0_pin_mux(void)
-{
-	configure_module_pin_mux(uart0_pin_mux);
-}
-
-/*
- * Do board-specific muxes.
- */
-void enable_board_pin_mux(void)
-{
-	/* NAND Flash */
-	configure_module_pin_mux(nand_pin_mux);
-	/* SD Card */
-	configure_module_pin_mux(mmc0_pin_mux);
-	/* Ethernet pinmux. */
-	configure_module_pin_mux(rmii1_pin_mux);
-}
diff --git a/qemu/roms/u-boot/board/isee/igep00x0/Makefile b/qemu/roms/u-boot/board/isee/igep00x0/Makefile
deleted file mode 100644
index 68b151c3c..000000000
--- a/qemu/roms/u-boot/board/isee/igep00x0/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= igep00x0.o
diff --git a/qemu/roms/u-boot/board/isee/igep00x0/igep00x0.c b/qemu/roms/u-boot/board/isee/igep00x0/igep00x0.c
deleted file mode 100644
index 3b2b1f15b..000000000
--- a/qemu/roms/u-boot/board/isee/igep00x0/igep00x0.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * (C) Copyright 2010
- * ISEE 2007 SL, <www.iseebcn.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <common.h>
-#include <twl4030.h>
-#include <netdev.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/mach-types.h>
-#include "igep00x0.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET)
-/* GPMC definitions for LAN9221 chips */
-static const u32 gpmc_lan_config[] = {
-	NET_LAN9221_GPMC_CONFIG1,
-	NET_LAN9221_GPMC_CONFIG2,
-	NET_LAN9221_GPMC_CONFIG3,
-	NET_LAN9221_GPMC_CONFIG4,
-	NET_LAN9221_GPMC_CONFIG5,
-	NET_LAN9221_GPMC_CONFIG6,
-};
-#endif
-
-/*
- * Routine: board_init
- * Description: Early hardware init.
- */
-int board_init(void)
-{
-	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
-	/* boot param addr */
-	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
-	return 0;
-}
-
-#if defined(CONFIG_SHOW_BOOT_PROGRESS) && !defined(CONFIG_SPL_BUILD)
-void show_boot_progress(int val)
-{
-	if (val < 0) {
-		/* something went wrong */
-		return;
-	}
-
-	if (!gpio_request(IGEP00X0_GPIO_LED, ""))
-		gpio_direction_output(IGEP00X0_GPIO_LED, 1);
-}
-#endif
-
-#ifdef CONFIG_SPL_BUILD
-/*
- * Routine: omap_rev_string
- * Description: For SPL builds output board rev
- */
-void omap_rev_string(void)
-{
-}
-
-/*
- * Routine: get_board_mem_timings
- * Description: If we use SPL then there is no x-loader nor config header
- * so we have to setup the DDR timings ourself on both banks.
- */
-void get_board_mem_timings(struct board_sdrc_timings *timings)
-{
-	timings->mr = MICRON_V_MR_165;
-#ifdef CONFIG_BOOT_NAND
-	timings->mcfg = MICRON_V_MCFG_200(256 << 20);
-	timings->ctrla = MICRON_V_ACTIMA_200;
-	timings->ctrlb = MICRON_V_ACTIMB_200;
-	timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
-#else
-	if (get_cpu_family() == CPU_OMAP34XX) {
-		timings->mcfg = NUMONYX_V_MCFG_165(256 << 20);
-		timings->ctrla = NUMONYX_V_ACTIMA_165;
-		timings->ctrlb = NUMONYX_V_ACTIMB_165;
-		timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
-
-	} else {
-		timings->mcfg = NUMONYX_V_MCFG_200(256 << 20);
-		timings->ctrla = NUMONYX_V_ACTIMA_200;
-		timings->ctrlb = NUMONYX_V_ACTIMB_200;
-		timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
-	}
-#endif
-}
-#endif
-
-#if defined(CONFIG_CMD_NET)
-/*
- * Routine: setup_net_chip
- * Description: Setting up the configuration GPMC registers specific to the
- *		Ethernet hardware.
- */
-static void setup_net_chip(void)
-{
-	struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
-
-	enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5], 0x2C000000,
-			GPMC_SIZE_16M);
-
-	/* Enable off mode for NWE in PADCONF_GPMC_NWE register */
-	writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
-	/* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
-	writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
-	/* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
-	writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
-		&ctrl_base->gpmc_nadv_ale);
-
-	/* Make GPIO 64 as output pin and send a magic pulse through it */
-	if (!gpio_request(64, "")) {
-		gpio_direction_output(64, 0);
-		gpio_set_value(64, 1);
-		udelay(1);
-		gpio_set_value(64, 0);
-		udelay(1);
-		gpio_set_value(64, 1);
-	}
-}
-#else
-static inline void setup_net_chip(void) {}
-#endif
-
-#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
-int board_mmc_init(bd_t *bis)
-{
-	return omap_mmc_init(0, 0, 0, -1, -1);
-}
-#endif
-
-void set_fdt(void)
-{
-	switch (gd->bd->bi_arch_number) {
-	case MACH_TYPE_IGEP0020:
-		setenv("dtbfile", "omap3-igep0020.dtb");
-		break;
-	case MACH_TYPE_IGEP0030:
-		setenv("dtbfile", "omap3-igep0030.dtb");
-		break;
-	}
-}
-
-/*
- * Routine: misc_init_r
- * Description: Configure board specific parts
- */
-int misc_init_r(void)
-{
-	twl4030_power_init();
-
-	setup_net_chip();
-
-	dieid_num_r();
-
-	set_fdt();
-
-	return 0;
-}
-
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- *		hardware. Many pins need to be moved from protect to primary
- *		mode.
- */
-void set_muxconf_regs(void)
-{
-	MUX_DEFAULT();
-
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
-	MUX_IGEP0020();
-#endif
-
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
-	MUX_IGEP0030();
-#endif
-}
-
-#if defined(CONFIG_CMD_NET)
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_SMC911X
-	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
-#endif
-	return rc;
-}
-#endif
diff --git a/qemu/roms/u-boot/board/isee/igep00x0/igep00x0.h b/qemu/roms/u-boot/board/isee/igep00x0/igep00x0.h
deleted file mode 100644
index 181f81f2a..000000000
--- a/qemu/roms/u-boot/board/isee/igep00x0/igep00x0.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * (C) Copyright 2010
- * ISEE 2007 SL, <www.iseebcn.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef _IGEP00X0_H_
-#define _IGEP00X0_H_
-
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
-#define IGEP00X0_GPIO_LED 27
-#endif
-
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
-#define IGEP00X0_GPIO_LED 16
-#endif
-
-const omap3_sysinfo sysinfo = {
-	DDR_STACKED,
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
-	"IGEPv2",
-#endif
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
-	"IGEP COM MODULE/ELECTRON",
-#endif
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
-	"IGEP COM PROTON",
-#endif
-#if defined(CONFIG_ENV_IS_IN_ONENAND)
-	"ONENAND",
-#else
-	"NAND",
-#endif
-};
-
-static void setup_net_chip(void);
-
-/*
- * IEN  - Input Enable
- * IDIS - Input Disable
- * PTD  - Pull type Down
- * PTU  - Pull type Up
- * DIS  - Pull type selection is inactive
- * EN   - Pull type selection is active
- * M0   - Mode 0
- * The commented string gives the final mux configuration for that pin
- */
-#define MUX_DEFAULT()\
-	MUX_VAL(CP(SDRC_D0),        (IEN  | PTD | DIS | M0)) /* SDRC_D0 */\
-	MUX_VAL(CP(SDRC_D1),        (IEN  | PTD | DIS | M0)) /* SDRC_D1 */\
-	MUX_VAL(CP(SDRC_D2),        (IEN  | PTD | DIS | M0)) /* SDRC_D2 */\
-	MUX_VAL(CP(SDRC_D3),        (IEN  | PTD | DIS | M0)) /* SDRC_D3 */\
-	MUX_VAL(CP(SDRC_D4),        (IEN  | PTD | DIS | M0)) /* SDRC_D4 */\
-	MUX_VAL(CP(SDRC_D5),        (IEN  | PTD | DIS | M0)) /* SDRC_D5 */\
-	MUX_VAL(CP(SDRC_D6),        (IEN  | PTD | DIS | M0)) /* SDRC_D6 */\
-	MUX_VAL(CP(SDRC_D7),        (IEN  | PTD | DIS | M0)) /* SDRC_D7 */\
-	MUX_VAL(CP(SDRC_D8),        (IEN  | PTD | DIS | M0)) /* SDRC_D8 */\
-	MUX_VAL(CP(SDRC_D9),        (IEN  | PTD | DIS | M0)) /* SDRC_D9 */\
-	MUX_VAL(CP(SDRC_D10),       (IEN  | PTD | DIS | M0)) /* SDRC_D10 */\
-	MUX_VAL(CP(SDRC_D11),       (IEN  | PTD | DIS | M0)) /* SDRC_D11 */\
-	MUX_VAL(CP(SDRC_D12),       (IEN  | PTD | DIS | M0)) /* SDRC_D12 */\
-	MUX_VAL(CP(SDRC_D13),       (IEN  | PTD | DIS | M0)) /* SDRC_D13 */\
-	MUX_VAL(CP(SDRC_D14),       (IEN  | PTD | DIS | M0)) /* SDRC_D14 */\
-	MUX_VAL(CP(SDRC_D15),       (IEN  | PTD | DIS | M0)) /* SDRC_D15 */\
-	MUX_VAL(CP(SDRC_D16),       (IEN  | PTD | DIS | M0)) /* SDRC_D16 */\
-	MUX_VAL(CP(SDRC_D17),       (IEN  | PTD | DIS | M0)) /* SDRC_D17 */\
-	MUX_VAL(CP(SDRC_D18),       (IEN  | PTD | DIS | M0)) /* SDRC_D18 */\
-	MUX_VAL(CP(SDRC_D19),       (IEN  | PTD | DIS | M0)) /* SDRC_D19 */\
-	MUX_VAL(CP(SDRC_D20),       (IEN  | PTD | DIS | M0)) /* SDRC_D20 */\
-	MUX_VAL(CP(SDRC_D21),       (IEN  | PTD | DIS | M0)) /* SDRC_D21 */\
-	MUX_VAL(CP(SDRC_D22),       (IEN  | PTD | DIS | M0)) /* SDRC_D22 */\
-	MUX_VAL(CP(SDRC_D23),       (IEN  | PTD | DIS | M0)) /* SDRC_D23 */\
-	MUX_VAL(CP(SDRC_D24),       (IEN  | PTD | DIS | M0)) /* SDRC_D24 */\
-	MUX_VAL(CP(SDRC_D25),       (IEN  | PTD | DIS | M0)) /* SDRC_D25 */\
-	MUX_VAL(CP(SDRC_D26),       (IEN  | PTD | DIS | M0)) /* SDRC_D26 */\
-	MUX_VAL(CP(SDRC_D27),       (IEN  | PTD | DIS | M0)) /* SDRC_D27 */\
-	MUX_VAL(CP(SDRC_D28),       (IEN  | PTD | DIS | M0)) /* SDRC_D28 */\
-	MUX_VAL(CP(SDRC_D29),       (IEN  | PTD | DIS | M0)) /* SDRC_D29 */\
-	MUX_VAL(CP(SDRC_D30),       (IEN  | PTD | DIS | M0)) /* SDRC_D30 */\
-	MUX_VAL(CP(SDRC_D31),       (IEN  | PTD | DIS | M0)) /* SDRC_D31 */\
-	MUX_VAL(CP(SDRC_CLK),       (IEN  | PTD | DIS | M0)) /* SDRC_CLK */\
-	MUX_VAL(CP(SDRC_DQS0),      (IEN  | PTD | DIS | M0)) /* SDRC_DQS0 */\
-	MUX_VAL(CP(SDRC_DQS1),      (IEN  | PTD | DIS | M0)) /* SDRC_DQS1 */\
-	MUX_VAL(CP(SDRC_DQS2),      (IEN  | PTD | DIS | M0)) /* SDRC_DQS2 */\
-	MUX_VAL(CP(SDRC_DQS3),      (IEN  | PTD | DIS | M0)) /* SDRC_DQS3 */\
-	MUX_VAL(CP(GPMC_A1),        (IDIS | PTD | DIS | M0)) /* GPMC_A1 */\
-	MUX_VAL(CP(GPMC_A2),        (IDIS | PTD | DIS | M0)) /* GPMC_A2 */\
-	MUX_VAL(CP(GPMC_A3),        (IDIS | PTD | DIS | M0)) /* GPMC_A3 */\
-	MUX_VAL(CP(GPMC_A4),        (IDIS | PTD | DIS | M0)) /* GPMC_A4 */\
-	MUX_VAL(CP(GPMC_A5),        (IDIS | PTD | DIS | M0)) /* GPMC_A5 */\
-	MUX_VAL(CP(GPMC_A6),        (IDIS | PTD | DIS | M0)) /* GPMC_A6 */\
-	MUX_VAL(CP(GPMC_A7),        (IDIS | PTD | DIS | M0)) /* GPMC_A7 */\
-	MUX_VAL(CP(GPMC_A8),        (IDIS | PTD | DIS | M0)) /* GPMC_A8 */\
-	MUX_VAL(CP(GPMC_A9),        (IDIS | PTD | DIS | M0)) /* GPMC_A9 */\
-	MUX_VAL(CP(GPMC_A10),       (IDIS | PTD | DIS | M0)) /* GPMC_A10 */\
-	MUX_VAL(CP(GPMC_D0),        (IEN  | PTD | DIS | M0)) /* GPMC_D0 */\
-	MUX_VAL(CP(GPMC_D1),        (IEN  | PTD | DIS | M0)) /* GPMC_D1 */\
-	MUX_VAL(CP(GPMC_D2),        (IEN  | PTD | DIS | M0)) /* GPMC_D2 */\
-	MUX_VAL(CP(GPMC_D3),        (IEN  | PTD | DIS | M0)) /* GPMC_D3 */\
-	MUX_VAL(CP(GPMC_D4),        (IEN  | PTD | DIS | M0)) /* GPMC_D4 */\
-	MUX_VAL(CP(GPMC_D5),        (IEN  | PTD | DIS | M0)) /* GPMC_D5 */\
-	MUX_VAL(CP(GPMC_D6),        (IEN  | PTD | DIS | M0)) /* GPMC_D6 */\
-	MUX_VAL(CP(GPMC_D7),        (IEN  | PTD | DIS | M0)) /* GPMC_D7 */\
-	MUX_VAL(CP(GPMC_D8),        (IEN  | PTD | DIS | M0)) /* GPMC_D8 */\
-	MUX_VAL(CP(GPMC_D9),        (IEN  | PTD | DIS | M0)) /* GPMC_D9 */\
-	MUX_VAL(CP(GPMC_D10),       (IEN  | PTD | DIS | M0)) /* GPMC_D10 */\
-	MUX_VAL(CP(GPMC_D11),       (IEN  | PTD | DIS | M0)) /* GPMC_D11 */\
-	MUX_VAL(CP(GPMC_D12),       (IEN  | PTD | DIS | M0)) /* GPMC_D12 */\
-	MUX_VAL(CP(GPMC_D13),       (IEN  | PTD | DIS | M0)) /* GPMC_D13 */\
-	MUX_VAL(CP(GPMC_D14),       (IEN  | PTD | DIS | M0)) /* GPMC_D14 */\
-	MUX_VAL(CP(GPMC_D15),       (IEN  | PTD | DIS | M0)) /* GPMC_D15 */\
-	MUX_VAL(CP(GPMC_NCS0),      (IDIS | PTU | EN  | M0)) /* GPMC_nCS0 */\
-	MUX_VAL(CP(GPMC_NCS1),      (IDIS | PTU | EN  | M0)) /* GPMC_nCS1 */\
-	MUX_VAL(CP(GPMC_NCS2),      (IDIS | PTU | EN  | M0)) /* GPIO_nCS2 */\
-	MUX_VAL(CP(GPMC_NCS3),      (IDIS | PTU | EN  | M0)) /* GPIO_nCS3 */\
-	MUX_VAL(CP(GPMC_NCS4),      (IDIS | PTU | EN  | M0)) /* GPMC_nCS4 */\
-	MUX_VAL(CP(GPMC_NCS5),      (IDIS | PTU | EN  | M0)) /* GPMC_nCS5 */\
-	MUX_VAL(CP(GPMC_NCS6),      (IDIS | PTU | EN  | M0)) /* GPMC_nCS6 */\
-	MUX_VAL(CP(GPMC_NCS7),      (IDIS | PTU | EN  | M0)) /* GPMC_nCS7 */\
-	MUX_VAL(CP(GPMC_CLK),       (IDIS | PTD | DIS | M0)) /* GPMC_CLK */\
-	MUX_VAL(CP(GPMC_NADV_ALE),  (IDIS | PTD | DIS | M0)) /* GPMC_nADV_ALE */\
-	MUX_VAL(CP(GPMC_NOE),       (IDIS | PTD | DIS | M0)) /* GPMC_nOE */\
-	MUX_VAL(CP(GPMC_NWE),       (IDIS | PTD | DIS | M0)) /* GPMC_nWE */\
-	MUX_VAL(CP(GPMC_NBE0_CLE),  (IDIS | PTD | DIS | M0)) /* GPMC_nBE0_CLE */\
-	MUX_VAL(CP(GPMC_NBE1),      (IEN  | PTD | DIS | M0)) /* GPMC_nBE1 */\
-	MUX_VAL(CP(GPMC_NWP),       (IEN  | PTD | DIS | M0)) /* GPMC_nWP */\
-	MUX_VAL(CP(GPMC_WAIT0),     (IEN  | PTU | EN  | M0)) /* GPMC_WAIT0 */\
-	MUX_VAL(CP(MMC1_CLK),       (IDIS | PTU | EN  | M0)) /* MMC1_CLK */\
-	MUX_VAL(CP(MMC1_CMD),       (IEN  | PTU | EN  | M0)) /* MMC1_CMD */\
-	MUX_VAL(CP(MMC1_DAT0),      (IEN  | PTU | EN  | M0)) /* MMC1_DAT0 */\
-	MUX_VAL(CP(MMC1_DAT1),      (IEN  | PTU | EN  | M0)) /* MMC1_DAT1 */\
-	MUX_VAL(CP(MMC1_DAT2),      (IEN  | PTU | EN  | M0)) /* MMC1_DAT2 */\
-	MUX_VAL(CP(MMC1_DAT3),      (IEN  | PTU | EN  | M0)) /* MMC1_DAT3 */\
-	MUX_VAL(CP(UART3_TX_IRTX),  (IDIS | PTD | DIS | M0)) /* UART3_TX */\
-	MUX_VAL(CP(UART3_RX_IRRX),  (IEN  | PTD | DIS | M0)) /* UART3_RX */\
-	MUX_VAL(CP(I2C1_SCL),       (IEN  | PTU | EN  | M0)) /* I2C1_SCL */\
-	MUX_VAL(CP(I2C1_SDA),       (IEN  | PTU | EN  | M0)) /* I2C1_SDA */\
-	MUX_VAL(CP(I2C4_SCL),       (IEN  | PTU | EN  | M0)) /* I2C4_SCL */\
-	MUX_VAL(CP(I2C4_SDA),       (IEN  | PTU | EN  | M0)) /* I2C4_SDA */\
-	MUX_VAL(CP(SYS_32K),        (IEN  | PTD | DIS | M0)) /* SYS_32K */\
-	MUX_VAL(CP(SYS_BOOT0),      (IEN  | PTD | DIS | M4)) /* GPIO_2 */\
-	MUX_VAL(CP(SYS_BOOT1),      (IEN  | PTD | DIS | M4)) /* GPIO_3 */\
-	MUX_VAL(CP(SYS_BOOT2),      (IEN  | PTD | DIS | M4)) /* GPIO_4 */\
-	MUX_VAL(CP(SYS_BOOT3),      (IEN  | PTD | DIS | M4)) /* GPIO_5 */\
-	MUX_VAL(CP(SYS_BOOT4),      (IEN  | PTD | DIS | M4)) /* GPIO_6 */\
-	MUX_VAL(CP(SYS_BOOT5),      (IEN  | PTD | DIS | M4)) /* GPIO_7 */\
-	MUX_VAL(CP(SYS_BOOT6),      (IEN  | PTD | DIS | M4)) /* GPIO_8 */\
-	MUX_VAL(CP(SDRC_CKE0),      (IDIS | PTU | EN  | M0)) /* SDRC_CKE0 */\
-	MUX_VAL(CP(SDRC_CKE1),      (IDIS | PTU | EN  | M0)) /* SDRC_CKE1 */
-#endif
-
-#define MUX_IGEP0020() \
-	MUX_VAL(CP(GPMC_WAIT2),     (IEN  | PTU | DIS | M4)) /* GPIO_64-ETH_NRST */\
-
-#define MUX_IGEP0030() \
-	MUX_VAL(CP(UART1_TX),       (IDIS | PTD | DIS | M0)) /* UART1_TX */\
-	MUX_VAL(CP(UART1_RX),       (IEN  | PTD | DIS | M0)) /* UART1_RX */