Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

2 files changed, 0 insertions, 219 deletions

diff --git a/qemu/roms/u-boot/board/ids/ids8313/Makefile b/qemu/roms/u-boot/board/ids/ids8313/Makefile
deleted file mode 100644
index 56cfd403f..000000000
--- a/qemu/roms/u-boot/board/ids/ids8313/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2013
-# Heiko Schocher, DENX Software Engineering, <hs@denx.de>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= ids8313.o
diff --git a/qemu/roms/u-boot/board/ids/ids8313/ids8313.c b/qemu/roms/u-boot/board/ids/ids8313/ids8313.c
deleted file mode 100644
index f742143bb..000000000
--- a/qemu/roms/u-boot/board/ids/ids8313/ids8313.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * (C) Copyright 2013
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * Based on:
- * Copyright (c) 2011 IDS GmbH, Germany
- * ids8313.c - ids8313 board support.
- *
- * Sergej Stepanov <ste@ids.de>
- * Based on board/freescale/mpc8313erdb/mpc8313erdb.c
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc83xx.h>
-#include <spi.h>
-#include <libfdt.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-/** CPLD contains the info about:
- * - board type: *pCpld & 0xF0
- * - hw-revision: *pCpld & 0x0F
- * - cpld-revision: *pCpld+1
- */
-int checkboard(void)
-{
-	char *pcpld = (char *)CONFIG_SYS_CPLD_BASE;
-	u8 u8Vers = readb(pcpld);
-	u8 u8Revs = readb(pcpld + 1);
-
-	printf("Board: ");
-	switch (u8Vers & 0xF0) {
-	case '\x40':
-		printf("CU73X");
-		break;
-	case '\x50':
-		printf("CC73X");
-		break;
-	default:
-		printf("unknown(0x%02X, 0x%02X)\n", u8Vers, u8Revs);
-		return 0;
-	}
-	printf("\nInfo:  HW-Rev: %i, CPLD-Rev: %i\n",
-	       u8Vers & 0x0F, u8Revs & 0xFF);
-	return 0;
-}
-
-/*
- *  fixed sdram init
- */
-int fixed_sdram(unsigned long config)
-{
-	immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	u32 msize = CONFIG_SYS_DDR_SIZE << 20;
-
-#ifndef CONFIG_SYS_RAMBOOT
-	u32 msize_log2 = __ilog2(msize);
-
-	out_be32(&im->sysconf.ddrlaw[0].bar,
-		 (CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000));
-	out_be32(&im->sysconf.ddrlaw[0].ar, LBLAWAR_EN | (msize_log2 - 1));
-	out_be32(&im->sysconf.ddrcdr, CONFIG_SYS_DDRCDR_VALUE);
-	sync();
-
-	/*
-	 * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg],
-	 * or the DDR2 controller may fail to initialize correctly.
-	 */
-	udelay(50000);
-
-	out_be32(&im->ddr.csbnds[0].csbnds, (msize - 1) >> 24);
-	out_be32(&im->ddr.cs_config[0], config);
-
-	/* currently we use only one CS, so disable the other banks */
-	out_be32(&im->ddr.cs_config[1], 0);
-	out_be32(&im->ddr.cs_config[2], 0);
-	out_be32(&im->ddr.cs_config[3], 0);
-
-	out_be32(&im->ddr.timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
-	out_be32(&im->ddr.timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
-	out_be32(&im->ddr.timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
-	out_be32(&im->ddr.timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
-
-	out_be32(&im->ddr.sdram_cfg, CONFIG_SYS_SDRAM_CFG);
-	out_be32(&im->ddr.sdram_cfg2, CONFIG_SYS_SDRAM_CFG2);
-
-	out_be32(&im->ddr.sdram_mode, CONFIG_SYS_DDR_MODE);
-	out_be32(&im->ddr.sdram_mode2, CONFIG_SYS_DDR_MODE_2);
-
-	out_be32(&im->ddr.sdram_interval, CONFIG_SYS_DDR_INTERVAL);
-	out_be32(&im->ddr.sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CNTL);
-	sync();
-	udelay(300);
-
-	/* enable DDR controller */
-	setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN);
-	/* now check the real size */
-	disable_addr_trans();
-	msize = get_ram_size(CONFIG_SYS_DDR_BASE, msize);
-	enable_addr_trans();
-#endif
-	return msize;
-}
-
-static int setup_sdram(void)
-{
-	u32 msize = CONFIG_SYS_DDR_SIZE << 20;
-	long int size_01, size_02;
-
-	size_01 = fixed_sdram(CONFIG_SYS_DDR_CONFIG);
-	size_02 = fixed_sdram(CONFIG_SYS_DDR_CONFIG_256);
-
-	if (size_01 > size_02)
-		msize = fixed_sdram(CONFIG_SYS_DDR_CONFIG);
-	else
-		msize = size_02;
-
-	return msize;
-}
-
-phys_size_t initdram(int board_type)
-{
-	immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	fsl_lbc_t *lbc = &im->im_lbc;
-	u32 msize = 0;
-
-	if ((in_be32(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32)im)
-		return -1;
-
-	msize = setup_sdram();
-
-	out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR);
-	out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR);
-	sync();
-
-	return msize;
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup(blob, bd);
-}
-#endif
-
-/* gpio mask for spi_cs */
-#define IDSCPLD_SPI_CS_MASK		0x00000001
-/* spi_cs multiplexed through cpld */
-#define IDSCPLD_SPI_CS_BASE		(CONFIG_SYS_CPLD_BASE + 0xf)
-
-#if defined(CONFIG_MISC_INIT_R)
-/* srp umcr mask for rts */
-#define IDSUMCR_RTS_MASK 0x04
-int misc_init_r(void)
-{
-	/*srp*/
-	duart83xx_t *uart1 = &((immap_t *)CONFIG_SYS_IMMR)->duart[0];
-	duart83xx_t *uart2 = &((immap_t *)CONFIG_SYS_IMMR)->duart[1];
-
-	gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
-	u8 *spi_base = (u8 *)IDSCPLD_SPI_CS_BASE;
-
-	/* deactivate spi_cs channels */
-	out_8(spi_base, 0);
-	/* deactivate the spi_cs */
-	setbits_be32(&iopd->dir, IDSCPLD_SPI_CS_MASK);
-	/*srp - deactivate rts*/
-	out_8(&uart1->umcr, IDSUMCR_RTS_MASK);
-	out_8(&uart2->umcr, IDSUMCR_RTS_MASK);
-
-
-	gd->fdt_blob = (void *)CONFIG_SYS_FLASH_BASE;
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_MPC8XXX_SPI
-/*
- * The following are used to control the SPI chip selects
- */
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
-	return bus == 0 && ((cs >= 0) && (cs <= 2));
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
-	gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
-	u8 *spi_base = (u8 *)IDSCPLD_SPI_CS_BASE;
-
-	/* select the spi_cs channel */
-	out_8(spi_base, 1 << slave->cs);
-	/* activate the spi_cs */
-	clrbits_be32(&iopd->dat, IDSCPLD_SPI_CS_MASK);
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
-	gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
-	u8 *spi_base = (u8 *)IDSCPLD_SPI_CS_BASE;
-
-	/* select the spi_cs channel */
-	out_8(spi_base, 1 << slave->cs);
-	/* deactivate the spi_cs */
-	setbits_be32(&iopd->dat, IDSCPLD_SPI_CS_MASK);
-}
-#endif /* CONFIG_HARD_SPI */