Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

11 files changed, 0 insertions, 697 deletions

diff --git a/qemu/roms/u-boot/board/freescale/t4rdb/Makefile b/qemu/roms/u-boot/board/freescale/t4rdb/Makefile
deleted file mode 100644
index f7f7fc017..000000000
--- a/qemu/roms/u-boot/board/freescale/t4rdb/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Copyright 2014 Freescale Semiconductor, Inc.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-$(CONFIG_T4240RDB) += t4240rdb.o
-obj-y	+= ddr.o
-obj-y	+= eth.o
-obj-$(CONFIG_PCI)	+= pci.o
-obj-y	+= law.o
-obj-y	+= tlb.o
diff --git a/qemu/roms/u-boot/board/freescale/t4rdb/ddr.c b/qemu/roms/u-boot/board/freescale/t4rdb/ddr.c
deleted file mode 100644
index 5a43c1bc7..000000000
--- a/qemu/roms/u-boot/board/freescale/t4rdb/ddr.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <hwconfig.h>
-#include <asm/mmu.h>
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-#include <asm/fsl_law.h>
-#include "ddr.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
-	ulong ddr_freq;
-
-	if (ctrl_num > 2) {
-		printf("Not supported controller number %d\n", ctrl_num);
-		return;
-	}
-	if (!pdimm->n_ranks)
-		return;
-
-	/*
-	 * we use identical timing for all slots. If needed, change the code
-	 * to  pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num];
-	 */
-	if (popts->registered_dimm_en)
-		pbsp = rdimms[0];
-	else
-		pbsp = udimms[0];
-
-
-	/* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
-	 * freqency and n_banks specified in board_specific_parameters table.
-	 */
-	ddr_freq = get_ddr_freq(0) / 1000000;
-	while (pbsp->datarate_mhz_high) {
-		if (pbsp->n_ranks == pdimm->n_ranks &&
-		    (pdimm->rank_density >> 30) >= pbsp->rank_gb) {
-			if (ddr_freq <= pbsp->datarate_mhz_high) {
-				popts->clk_adjust = pbsp->clk_adjust;
-				popts->wrlvl_start = pbsp->wrlvl_start;
-				popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
-				popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
-				goto found;
-			}
-			pbsp_highest = pbsp;
-		}
-		pbsp++;
-	}
-
-	if (pbsp_highest) {
-		printf("Error: board specific timing not found for data\n"
-			"rate %lu MT/s\n"
-			"Trying to use the highest speed (%u) parameters\n",
-			ddr_freq, pbsp_highest->datarate_mhz_high);
-		popts->clk_adjust = pbsp_highest->clk_adjust;
-		popts->wrlvl_start = pbsp_highest->wrlvl_start;
-		popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
-		popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
-	} else {
-		panic("DIMM is not supported by this board");
-	}
-found:
-	debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n"
-		"\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x,\n"
-		"wrlvl_ctrl_3 0x%x\n",
-		pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb,
-		pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
-		pbsp->wrlvl_ctl_3);
-
-	/*
-	 * Factors to consider for half-strength driver enable:
-	 *	- number of DIMMs installed
-	 */
-	popts->half_strength_driver_enable = 0;
-	/*
-	 * Write leveling override
-	 */
-	popts->wrlvl_override = 1;
-	popts->wrlvl_sample = 0xf;
-
-	/*
-	 * Rtt and Rtt_WR override
-	 */
-	popts->rtt_override = 0;
-
-	/* Enable ZQ calibration */
-	popts->zq_en = 1;
-
-	/* DHC_EN =1, ODT = 75 Ohm */
-	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
-	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
-}
-
-phys_size_t initdram(int board_type)
-{
-	phys_size_t dram_size;
-
-	puts("Initializing....using SPD\n");
-
-	dram_size = fsl_ddr_sdram();
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-	puts("    DDR: ");
-	return dram_size;
-}
diff --git a/qemu/roms/u-boot/board/freescale/t4rdb/ddr.h b/qemu/roms/u-boot/board/freescale/t4rdb/ddr.h
deleted file mode 100644
index 7b854767e..000000000
--- a/qemu/roms/u-boot/board/freescale/t4rdb/ddr.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __DDR_H__
-#define __DDR_H__
-struct board_specific_parameters {
-	u32 n_ranks;
-	u32 datarate_mhz_high;
-	u32 rank_gb;
-	u32 clk_adjust;
-	u32 wrlvl_start;
-	u32 wrlvl_ctl_2;
-	u32 wrlvl_ctl_3;
-};
-
-/*
- * These tables contain all valid speeds we want to override with board
- * specific parameters. datarate_mhz_high values need to be in ascending order
- * for each n_ranks group.
- */
-static const struct board_specific_parameters udimm0[] = {
-	/*
-	 * memory controller 0
-	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl
-	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
-	 */
-	{2,  1350, 4, 4,     8, 0x0809090b, 0x0c0c0d0a},
-	{2,  1350, 0, 5,     7, 0x0709090b, 0x0c0c0d09},
-	{2,  1666, 4, 4,     8, 0x080a0a0d, 0x0d10100b},
-	{2,  1666, 0, 5,     7, 0x080a0a0c, 0x0d0d0e0a},
-	{2,  1900, 0, 4,     8, 0x090a0b0e, 0x0f11120c},
-	{2,  2140, 0, 4,     8, 0x090a0b0e, 0x0f11120c},
-	{1,  1350, 0, 5,     8, 0x0809090b, 0x0c0c0d0a},
-	{1,  1700, 0, 5,     8, 0x080a0a0c, 0x0c0d0e0a},
-	{1,  1900, 0, 4,     8, 0x080a0a0c, 0x0e0e0f0a},
-	{1,  2140, 0, 4,     8, 0x090a0b0c, 0x0e0f100b},
-	{}
-};
-
-static const struct board_specific_parameters rdimm0[] = {
-	/*
-	 * memory controller 0
-	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl
-	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
-	 */
-	{4,  1350, 0, 5,     9, 0x08070605, 0x06070806},
-	{4,  1666, 0, 5,    11, 0x0a080706, 0x07090906},
-	{4,  2140, 0, 5,    12, 0x0b090807, 0x080a0b07},
-	{2,  1350, 0, 5,     9, 0x08070605, 0x06070806},
-	{2,  1666, 0, 5,    11, 0x0a090806, 0x08090a06},
-	{2,  2140, 0, 5,    12, 0x0b090807, 0x080a0b07},
-	{1,  1350, 0, 5,     9, 0x08070605, 0x06070806},
-	{1,  1666, 0, 5,    11, 0x0a090806, 0x08090a06},
-	{1,  2140, 0, 4,    12, 0x0b090807, 0x080a0b07},
-	{}
-};
-
-/*
- * The three slots have slightly different timing. The center values are good
- * for all slots. We use identical speed tables for them. In future use, if
- * DIMMs require separated tables, make more entries as needed.
- */
-static const struct board_specific_parameters *udimms[] = {
-	udimm0,
-};
-
-/*
- * The three slots have slightly different timing. See comments above.
- */
-static const struct board_specific_parameters *rdimms[] = {
-	rdimm0,
-};
-
-
-#endif
diff --git a/qemu/roms/u-boot/board/freescale/t4rdb/eth.c b/qemu/roms/u-boot/board/freescale/t4rdb/eth.c
deleted file mode 100644
index d220475b5..000000000
--- a/qemu/roms/u-boot/board/freescale/t4rdb/eth.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- *
- * Chunhe Lan <Chunhe.Lan@freescale.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <netdev.h>
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_law.h>
-#include <fsl_ddr_sdram.h>
-#include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
-#include <asm/fsl_liodn.h>
-#include <malloc.h>
-#include <fm_eth.h>
-#include <fsl_mdio.h>
-#include <miiphy.h>
-#include <phy.h>
-#include <asm/fsl_dtsec.h>
-#include <asm/fsl_serdes.h>
-#include <hwconfig.h>
-
-#include "../common/fman.h"
-#include "t4rdb.h"
-
-void fdt_fixup_board_enet(void *fdt)
-{
-	return;
-}
-
-int board_eth_init(bd_t *bis)
-{
-#if defined(CONFIG_FMAN_ENET)
-	int i, interface;
-	struct memac_mdio_info dtsec_mdio_info;
-	struct memac_mdio_info tgec_mdio_info;
-	struct mii_dev *dev;
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	u32 srds_prtcl_s1, srds_prtcl_s2;
-
-	srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
-				FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
-	srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
-	srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
-				FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
-	srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
-
-	dtsec_mdio_info.regs =
-		(struct memac_mdio_controller *)CONFIG_SYS_FM2_DTSEC_MDIO_ADDR;
-
-	dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
-
-	/* Register the 1G MDIO bus */
-	fm_memac_mdio_init(bis, &dtsec_mdio_info);
-
-	tgec_mdio_info.regs =
-		(struct memac_mdio_controller *)CONFIG_SYS_FM2_TGEC_MDIO_ADDR;
-	tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
-
-	/* Register the 10G MDIO bus */
-	fm_memac_mdio_init(bis, &tgec_mdio_info);
-
-	if (srds_prtcl_s1 == 28) {
-		/* SGMII */
-		fm_info_set_phy_address(FM1_DTSEC1, SGMII_PHY_ADDR1);
-		fm_info_set_phy_address(FM1_DTSEC2, SGMII_PHY_ADDR2);
-		fm_info_set_phy_address(FM1_DTSEC3, SGMII_PHY_ADDR3);
-		fm_info_set_phy_address(FM1_DTSEC4, SGMII_PHY_ADDR4);
-	} else {
-		puts("Invalid SerDes1 protocol for T4240RDB\n");
-	}
-
-	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
-		interface = fm_info_get_enet_if(i);
-		switch (interface) {
-		case PHY_INTERFACE_MODE_SGMII:
-			dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
-			fm_info_set_mdio(i, dev);
-			break;
-		default:
-			break;
-		}
-	}
-
-	for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
-		switch (fm_info_get_enet_if(i)) {
-		case PHY_INTERFACE_MODE_XGMII:
-			dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME);
-			fm_info_set_mdio(i, dev);
-			break;
-		default:
-			break;
-		}
-	}
-
-#if (CONFIG_SYS_NUM_FMAN == 2)
-	if (srds_prtcl_s2 == 56) {
-		/* SGMII && XFI */
-		fm_info_set_phy_address(FM2_DTSEC1, SGMII_PHY_ADDR5);
-		fm_info_set_phy_address(FM2_DTSEC2, SGMII_PHY_ADDR6);
-		fm_info_set_phy_address(FM2_DTSEC3, SGMII_PHY_ADDR7);
-		fm_info_set_phy_address(FM2_DTSEC4, SGMII_PHY_ADDR8);
-		fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR);
-		fm_info_set_phy_address(FM1_10GEC2, FM1_10GEC2_PHY_ADDR);
-		fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC2_PHY_ADDR);
-		fm_info_set_phy_address(FM2_10GEC2, FM2_10GEC1_PHY_ADDR);
-	} else {
-		puts("Invalid SerDes2 protocol for T4240RDB\n");
-	}
-
-	for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
-		interface = fm_info_get_enet_if(i);
-		switch (interface) {
-		case PHY_INTERFACE_MODE_SGMII:
-			dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
-			fm_info_set_mdio(i, dev);
-			break;
-		default:
-			break;
-		}
-	}
-
-	for (i = FM2_10GEC1; i < FM2_10GEC1 + CONFIG_SYS_NUM_FM2_10GEC; i++) {
-		switch (fm_info_get_enet_if(i)) {
-		case PHY_INTERFACE_MODE_XGMII:
-			dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME);
-			fm_info_set_mdio(i, dev);
-			break;
-		default:
-			break;
-		}
-	}
-#endif /* CONFIG_SYS_NUM_FMAN */
-
-	cpu_eth_init(bis);
-#endif /* CONFIG_FMAN_ENET */
-
-	return pci_eth_init(bis);
-}
diff --git a/qemu/roms/u-boot/board/freescale/t4rdb/law.c b/qemu/roms/u-boot/board/freescale/t4rdb/law.c
deleted file mode 100644
index 1f5876885..000000000
--- a/qemu/roms/u-boot/board/freescale/t4rdb/law.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-struct law_entry law_table[] = {
-	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC),
-#ifdef CONFIG_SYS_BMAN_MEM_PHYS
-	SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN),
-#endif
-#ifdef CONFIG_SYS_QMAN_MEM_PHYS
-	SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN),
-#endif
-#ifdef CONFIG_SYS_DCSRBAR_PHYS
-	/* Limit DCSR to 32M to access NPC Trace Buffer */
-	SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR),
-#endif
-#ifdef CONFIG_SYS_NAND_BASE_PHYS
-	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC),
-#endif
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/qemu/roms/u-boot/board/freescale/t4rdb/pci.c b/qemu/roms/u-boot/board/freescale/t4rdb/pci.c
deleted file mode 100644
index 6387a20ca..000000000
--- a/qemu/roms/u-boot/board/freescale/t4rdb/pci.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <pci.h>
-#include <asm/fsl_pci.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <asm/fsl_serdes.h>
-
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-
-void pci_of_setup(void *blob, bd_t *bd)
-{
-	FT_FSL_PCI_SETUP;
-}
diff --git a/qemu/roms/u-boot/board/freescale/t4rdb/t4240rdb.c b/qemu/roms/u-boot/board/freescale/t4rdb/t4240rdb.c
deleted file mode 100644
index 5448c86c4..000000000
--- a/qemu/roms/u-boot/board/freescale/t4rdb/t4240rdb.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <i2c.h>
-#include <netdev.h>
-#include <linux/compiler.h>
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_law.h>
-#include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
-#include <asm/fsl_liodn.h>
-#include <fm_eth.h>
-
-#include "t4rdb.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
-	struct cpu_type *cpu = gd->arch.cpu;
-
-	printf("Board: %sRDB, ", cpu->name);
-
-	puts("SERDES Reference Clocks:\n");
-	printf("       SERDES1=100MHz SERDES2=156.25MHz\n"
-	       "       SERDES3=100MHz SERDES4=100MHz\n");
-
-	return 0;
-}
-
-int board_early_init_r(void)
-{
-	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
-	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
-
-	/*
-	 * Remap Boot flash + PROMJET region to caching-inhibited
-	 * so that flash can be erased properly.
-	 */
-
-	/* Flush d-cache and invalidate i-cache of any FLASH data */
-	flush_dcache();
-	invalidate_icache();
-
-	/* invalidate existing TLB entry for flash + promjet */
-	disable_tlb(flash_esel);
-
-	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
-		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		0, flash_esel, BOOKE_PAGESZ_256M, 1);
-
-	set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
-	setup_portals();
-#endif
-
-	return 0;
-}
-
-int misc_init_r(void)
-{
-	return 0;
-}
-
-void ft_board_setup(void *blob, bd_t *bd)
-{
-	phys_addr_t base;
-	phys_size_t size;
-
-	ft_cpu_setup(blob, bd);
-
-	base = getenv_bootm_low();
-	size = getenv_bootm_size();
-
-	fdt_fixup_memory(blob, (u64)base, (u64)size);
-
-#ifdef CONFIG_PCI
-	pci_of_setup(blob, bd);
-#endif
-
-	fdt_fixup_liodn(blob);
-	fdt_fixup_dr_usb(blob, bd);
-
-#ifdef CONFIG_SYS_DPAA_FMAN
-	fdt_fixup_fman_ethernet(blob);
-	fdt_fixup_board_enet(blob);
-#endif
-}
-
-/*
- * This function is called by bdinfo to print detail board information.
- * As an exmaple for future board, we organize the messages into
- * several sections. If applicable, the message is in the format of
- * <name>      = <value>
- * It should aligned with normal output of bdinfo command.
- *
- * Voltage: Core, DDR and another configurable voltages
- * Clock  : Critical clocks which are not printed already
- * RCW    : RCW source if not printed already
- * Misc   : Other important information not in above catagories
- */
-void board_detail(void)
-{
-	int rcwsrc;
-
-	/* RCW section SW3[4] */
-	rcwsrc = 0x0;
-	puts("RCW source  = ");
-	switch (rcwsrc & 0x1) {
-	case 0x1:
-		puts("SDHC/eMMC\n");
-		break;
-	default:
-		puts("I2C normal addressing\n");
-		break;
-	}
-}
diff --git a/qemu/roms/u-boot/board/freescale/t4rdb/t4_pbi.cfg b/qemu/roms/u-boot/board/freescale/t4rdb/t4_pbi.cfg
deleted file mode 100644
index c9f8ced2a..000000000
--- a/qemu/roms/u-boot/board/freescale/t4rdb/t4_pbi.cfg
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# Copyright 2014 Freescale Semiconductor, Inc.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-#PBI commands
-#Initialize CPC1
-09010000 00200400
-09138000 00000000
-091380c0 00000100
-#512KB SRAM
-09010100 00000000
-09010104 fff80009
-09010f00 08000000
-#enable CPC1
-09010000 80000000
-#Configure LAW for CPC1
-09000d00 00000000
-09000d04 fff80000
-09000d08 81000012
-#slow mdio clock
-095fc030 00008148
-095fd030 00808148
-#Configure alternate space
-09000010 00000000
-09000014 ff000000
-09000018 81000000
-#Flush PBL data
-09138000 00000000
-091380c0 00000000
diff --git a/qemu/roms/u-boot/board/freescale/t4rdb/t4_rcw.cfg b/qemu/roms/u-boot/board/freescale/t4rdb/t4_rcw.cfg
deleted file mode 100644
index 13408bd01..000000000
--- a/qemu/roms/u-boot/board/freescale/t4rdb/t4_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-#serdes protocol  28_56_2_10
-16070019 18101916 00000000 00000000
-70701050 00448c00 6c020000 f5000000
-00000000 ee0000ee 00000000 000287fc
-00000000 50000000 00000000 00000028
diff --git a/qemu/roms/u-boot/board/freescale/t4rdb/t4rdb.h b/qemu/roms/u-boot/board/freescale/t4rdb/t4rdb.h
deleted file mode 100644
index fb25d4329..000000000
--- a/qemu/roms/u-boot/board/freescale/t4rdb/t4rdb.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __T4RDB_H__
-#define __T4RDB_H__
-
-#undef CONFIG_SYS_NUM_FM1_DTSEC
-#undef CONFIG_SYS_NUM_FM2_DTSEC
-#define CONFIG_SYS_NUM_FM1_DTSEC	4
-#define CONFIG_SYS_NUM_FM2_DTSEC	4
-
-void fdt_fixup_board_enet(void *blob);
-void pci_of_setup(void *blob, bd_t *bd);
-
-#endif
diff --git a/qemu/roms/u-boot/board/freescale/t4rdb/tlb.c b/qemu/roms/u-boot/board/freescale/t4rdb/tlb.c
deleted file mode 100644
index 4b50bcd09..000000000
--- a/qemu/roms/u-boot/board/freescale/t4rdb/tlb.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
-	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
-		      CONFIG_SYS_INIT_RAM_ADDR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
-		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
-		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
-		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-
-	/* TLB 1 */
-	/* *I*** - Covers boot page */
-#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR)
-	/*
-	 * *I*G - L3SRAM. When L3 is used as 512K SRAM */
-	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 0, BOOKE_PAGESZ_512K, 1),
-#else
-	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 0, BOOKE_PAGESZ_4K, 1),
-#endif
-
-	/* *I*G* - CCSRBAR */
-	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 1, BOOKE_PAGESZ_16M, 1),
-
-	/* *I*G* - Flash, localbus */
-	/* This will be changed to *I*G* after relocation to RAM. */
-	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
-		      MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
-		      0, 2, BOOKE_PAGESZ_256M, 1),
-
-	/* *I*G* - PCI */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 3, BOOKE_PAGESZ_1G, 1),
-
-	/* *I*G* - PCI */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x40000000,
-		      CONFIG_SYS_PCIE1_MEM_PHYS + 0x40000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 4, BOOKE_PAGESZ_256M, 1),
-
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x50000000,
-		      CONFIG_SYS_PCIE1_MEM_PHYS + 0x50000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 5, BOOKE_PAGESZ_256M, 1),
-
-	/* *I*G* - PCI I/O */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 6, BOOKE_PAGESZ_256K, 1),
-
-	/* Bman/Qman */
-#ifdef CONFIG_SYS_BMAN_MEM_PHYS
-	SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 9, BOOKE_PAGESZ_16M, 1),
-	SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000,
-		      CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 10, BOOKE_PAGESZ_16M, 1),
-#endif
-#ifdef CONFIG_SYS_QMAN_MEM_PHYS
-	SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 11, BOOKE_PAGESZ_16M, 1),
-	SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000,
-		      CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 12, BOOKE_PAGESZ_16M, 1),
-#endif
-#ifdef CONFIG_SYS_DCSRBAR_PHYS
-	SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 13, BOOKE_PAGESZ_32M, 1),
-#endif
-#ifdef CONFIG_SYS_NAND_BASE
-	/*
-	 * *I*G - NAND
-	 * entry 14 and 15 has been used hard coded, they will be disabled
-	 * in cpu_init_f, so we use entry 16 for nand.
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 16, BOOKE_PAGESZ_64K, 1),
-#endif
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);