Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 169 deletions

diff --git a/qemu/roms/u-boot/board/freescale/t1040qds/README b/qemu/roms/u-boot/board/freescale/t1040qds/README
deleted file mode 100644
index 8160ca0bc..000000000
--- a/qemu/roms/u-boot/board/freescale/t1040qds/README
+++ /dev/null
@@ -1,169 +0,0 @@
-Overview
---------
-The T1040QDS is a Freescale reference board that hosts the T1040 SoC
-(and variants).
-
-T1040 SoC Overview
-------------------
-The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA
-processor cores with high-performance data path acceleration architecture
-and network peripheral interfaces required for networking & telecommunications.
-
-The T1040/T1042 SoC includes the following function and features:
-
- - Four e5500 cores, each with a private 256 KB L2 cache
- - 256 KB shared L3 CoreNet platform cache (CPC)
- - Interconnect CoreNet platform
- - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving
-   support
- - Data Path Acceleration Architecture (DPAA) incorporating acceleration
- for the following functions:
-    -  Packet parsing, classification, and distribution
-    -  Queue management for scheduling, packet sequencing, and congestion
-    	management
-    -  Cryptography Acceleration (SEC 5.0)
-    - RegEx Pattern Matching Acceleration (PME 2.2)
-    - IEEE Std 1588 support
-    - Hardware buffer management for buffer allocation and deallocation
- - Ethernet interfaces
-    - Integrated 8-port Gigabit Ethernet switch (T1040 only)
-    - Four 1 Gbps Ethernet controllers
- - Two RGMII interfaces or one RGMII and one MII interfaces
- - High speed peripheral interfaces
-   - Four PCI Express 2.0 controllers running at up to 5 GHz
-   - Two SATA controllers supporting 1.5 and 3.0 Gb/s operation
-   - Upto two QSGMII interface
-   - Upto six SGMII interface supporting 1000 Mbps
-   - One SGMII interface supporting upto 2500 Mbps
- - Additional peripheral interfaces
-   - Two USB 2.0 controllers with integrated PHY
-   - SD/eSDHC/eMMC
-   -  eSPI controller
-   - Four I2C controllers
-   - Four UARTs
-   - Four GPIO controllers
-   - Integrated flash controller (IFC)
-   - LCD and HDMI interface (DIU) with 12 bit dual data rate
-   - TDM interface
- - Multicore programmable interrupt controller (PIC)
- - Two 8-channel DMA engines
- - Single source clocking implementation
- - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
-
- T1040QDS board Overview
- -----------------------
- - SERDES Connections, 8 lanes supporting:
-      — PCI Express: supporting Gen 1 and Gen 2;
-      — SGMII
-      — QSGMII
-      — SATA 2.0
-      — Aurora debug with dedicated connectors (T1040 only)
- - DDR Controller
-     - Supports rates of up to 1600 MHz data-rate
-     - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types.
- -IFC/Local Bus
-     - NAND flash: 8-bit, async, up to 2GB.
-     - NOR: 8-bit or 16-bit, non-multiplexed, up to 512MB
-     - GASIC: Simple (minimal) target within Qixis FPGA
-     - PromJET rapid memory download support
- - Ethernet
-     - Two on-board RGMII 10/100/1G ethernet ports.
-     - PHY #0 remains powered up during deep-sleep (T1040 only)
- - QIXIS System Logic FPGA
- - Clocks
-     - System and DDR clock (SYSCLK, “DDRCLK”)
-     - SERDES clocks
- - Power Supplies
- - Video
-     - DIU supports video at up to 1280x1024x32bpp
- - USB
-     - Supports two USB 2.0 ports with integrated PHYs
-     — Two type A ports with 5V@1.5A per port.
-     — Second port can be converted to OTG mini-AB
- - SDHC
-     - SDHC port connects directly to an adapter card slot, featuring:
-     - Supporting SD slots for: SD, SDHC (1x, 4x, 8x) and/or MMC
-     — Supporting eMMC memory devices
- - SPI
-    -  On-board support of 3 different devices and sizes
- - Other IO
-    - Two Serial ports
-    - ProfiBus port
-    - Four I2C ports
-
-Memory map on T1040QDS
-----------------------
-The addresses in brackets are physical addresses.
-
-Start Address  End Address      Description                     Size
-0xF_FFDF_0000  0xF_FFDF_0FFF    IFC - FPGA                      4KB
-0xF_FF80_0000  0xF_FF80_FFFF    IFC - NAND Flash                64KB
-0xF_FE00_0000  0xF_FEFF_FFFF    CCSRBAR                         16MB
-0xF_F803_0000  0xF_F803_FFFF    PCI Express 4 I/O Space         64KB
-0xF_F802_0000  0xF_F802_FFFF    PCI Express 3 I/O Space	        64KB
-0xF_F801_0000  0xF_F801_FFFF    PCI Express 2 I/O Space         64KB
-0xF_F800_0000  0xF_F800_FFFF    PCI Express 1 I/O Space	        64KB
-0xF_F600_0000  0xF_F7FF_FFFF    Queue manager software portal   32MB
-0xF_F400_0000  0xF_F5FF_FFFF    Buffer manager software portal  32MB
-0xF_E800_0000  0xF_EFFF_FFFF    IFC - NOR Flash                 128MB
-0xF_E000_0000  0xF_E7FF_FFFF    Promjet                         128MB
-0xF_0000_0000  0xF_003F_FFFF    DCSR                            4MB
-0xC_3000_0000  0xC_3FFF_FFFF    PCI Express 4 Mem Space         256MB
-0xC_2000_0000  0xC_2FFF_FFFF    PCI Express 3 Mem Space         256MB
-0xC_1000_0000  0xC_1FFF_FFFF    PCI Express 2 Mem Space         256MB
-0xC_0000_0000  0xC_0FFF_FFFF    PCI Express 1 Mem Space         256MB
-0x0_0000_0000  0x0_ffff_ffff    DDR                             2GB
-
-
-NOR Flash memory Map on T1040QDS
---------------------------------
- Start          End             Definition                       Size
-0xEFF40000      0xEFFFFFFF      u-boot (current bank)            768KB
-0xEFF20000      0xEFF3FFFF      u-boot env (current bank)        128KB
-0xEFF00000      0xEFF1FFFF      FMAN Ucode (current bank)        128KB
-0xED300000      0xEFEFFFFF      rootfs (alt bank)                44MB
-0xEC800000      0xEC8FFFFF      Hardware device tree (alt bank)  1MB
-0xEC020000      0xEC7FFFFF      Linux.uImage (alt bank)          7MB + 875KB
-0xEC000000      0xEC01FFFF      RCW (alt bank)                   128KB
-0xEBF40000      0xEBFFFFFF      u-boot (alt bank)                768KB
-0xEBF20000      0xEBF3FFFF      u-boot env (alt bank)            128KB
-0xEBF00000      0xEBF1FFFF      FMAN ucode (alt bank)            128KB
-0xE9300000      0xEBEFFFFF      rootfs (current bank)            44MB
-0xE8800000      0xE88FFFFF      Hardware device tree (cur bank)  11MB + 512KB
-0xE8020000      0xE86FFFFF      Linux.uImage (current bank)      7MB + 875KB
-0xE8000000      0xE801FFFF      RCW (current bank)               128KB
-
-
-Various Software configurations/environment variables/commands
---------------------------------------------------------------
-The below commands apply to T1040QDS
-
-1. U-boot environment variable hwconfig
-   The default hwconfig is:
-	hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1:
-					dr_mode=host,phy_type=utmi
-   Note: For USB gadget set "dr_mode=peripheral"
-
-2. FMAN Ucode versions
-   fsl_fman_ucode_t1040.bin
-
-3. Switching to alternate bank
-   Commands for switching to alternate bank.
-
-	1. To change from vbank0 to vbank4
-		=> qixis_reset altbank (it will boot using vbank4)
-
-	2.To change from vbank4 to vbank0
-		=> qixis reset (it will boot using vbank0)
-
-T1040 Personality
---------------------
-
-T1022 Personality
---------------------
-T1022 is a reduced personality of T1040 with less core/clusters.
-
-T1042 Personality
---------------------
-T1042 is a reduced personality of T1040 without Integrated 8-port Gigabit
-Ethernet switch. Rest of the blocks are same as T1040