Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 145 deletions

diff --git a/qemu/roms/u-boot/board/freescale/p1023rdb/p1023rdb.c b/qemu/roms/u-boot/board/freescale/p1023rdb/p1023rdb.c
deleted file mode 100644
index d2d4f8390..000000000
--- a/qemu/roms/u-boot/board/freescale/p1023rdb/p1023rdb.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Authors:  Roy Zang <tie-fei.zang@freescale.com>
- *           Chunhe Lan <Chunhe.Lan@freescale.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <pci.h>
-#include <asm/io.h>
-#include <asm/cache.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_pci.h>
-#include <fsl_ddr_sdram.h>
-#include <asm/fsl_portals.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <netdev.h>
-#include <malloc.h>
-#include <fm_eth.h>
-#include <fsl_mdio.h>
-#include <miiphy.h>
-#include <phy.h>
-#include <asm/fsl_dtsec.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
-	fsl_lbc_t *lbc = LBC_BASE_ADDR;
-
-	/* Set ABSWP to implement conversion of addresses in the LBC */
-	setbits_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR);
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	printf("Board: P1023 RDB\n");
-
-	return 0;
-}
-
-#ifdef CONFIG_PCI
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-#endif
-
-int board_early_init_r(void)
-{
-	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
-	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
-
-	/*
-	 * Remap Boot flash + PROMJET region to caching-inhibited
-	 * so that flash can be erased properly.
-	 */
-
-	/* Flush d-cache and invalidate i-cache of any FLASH data */
-	flush_dcache();
-	invalidate_icache();
-
-	/* invalidate existing TLB entry for flash + promjet */
-	disable_tlb(flash_esel);
-
-	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
-		MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		0, flash_esel, BOOKE_PAGESZ_256M, 1);
-
-	setup_portals();
-
-	return 0;
-}
-
-unsigned long get_board_sys_clk(ulong dummy)
-{
-	return gd->bus_clk;
-}
-
-unsigned long get_board_ddr_clk(ulong dummy)
-{
-	return gd->mem_clk;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	ccsr_gur_t *gur = (ccsr_gur_t *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-	struct fsl_pq_mdio_info dtsec_mdio_info;
-
-	/*
-	 * Need to set dTSEC 1 pin multiplexing to TSEC. The default setting
-	 * is not correct.
-	 */
-	setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_TSEC1_1);
-
-	dtsec_mdio_info.regs =
-		(struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR;
-	dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
-
-	/* Register the 1G MDIO bus */
-	fsl_pq_mdio_init(bis, &dtsec_mdio_info);
-
-	fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR);
-	fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR);
-
-	fm_info_set_mdio(FM1_DTSEC1,
-			 miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
-	fm_info_set_mdio(FM1_DTSEC2,
-			 miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
-
-#ifdef CONFIG_FMAN_ENET
-	cpu_eth_init(bis);
-#endif
-
-	return pci_eth_init(bis);
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
-{
-	phys_addr_t base;
-	phys_size_t size;
-
-	ft_cpu_setup(blob, bd);
-
-	base = getenv_bootm_low();
-	size = getenv_bootm_size();
-
-	fdt_fixup_memory(blob, (u64)base, (u64)size);
-
-#ifdef CONFIG_HAS_FSL_DR_USB
-	fdt_fixup_dr_usb(blob, bd);
-#endif
-
-	fdt_fixup_fman_ethernet(blob);
-}
-#endif