Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 249 deletions

diff --git a/qemu/roms/u-boot/board/eltec/elppc/misc.c b/qemu/roms/u-boot/board/eltec/elppc/misc.c
deleted file mode 100644
index d80eaba2d..000000000
--- a/qemu/roms/u-boot/board/eltec/elppc/misc.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * (C) Copyright 2002 ELTEC Elektronik AG
- * Frank Gottschling <fgottschling@eltec.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/* includes */
-#include <common.h>
-#include <linux/ctype.h>
-#include <pci.h>
-#include <net.h>
-#include "srom.h"
-
-/* imports  */
-extern int l2_cache_enable (int l2control);
-extern int eepro100_write_eeprom (struct eth_device *dev, int location,
-				  int addr_len, unsigned short data);
-extern int read_eeprom (struct eth_device *dev, int location, int addr_len);
-
-/*----------------------------------------------------------------------------*/
-/*
- * read/write to nvram is only byte access
- */
-void *nvram_read (void *dest, const long src, size_t count)
-{
-	uchar *d = (uchar *) dest;
-	uchar *s = (uchar *) (CONFIG_ENV_MAP_ADRS + src);
-
-	while (count--)
-		*d++ = *s++;
-
-	return dest;
-}
-
-void nvram_write (long dest, const void *src, size_t count)
-{
-	uchar *d = (uchar *) (CONFIG_ENV_MAP_ADRS + dest);
-	uchar *s = (uchar *) src;
-
-	while (count--)
-		*d++ = *s++;
-}
-
-/*----------------------------------------------------------------------------*/
-/*
- * handle sroms on ELPPC
- * fix ether address
- * set serial console as default
- */
-int misc_init_r (void)
-{
-	revinfo eerev;
-	u_char *ptr;
-	u_int i, l, initSrom, copyNv;
-	char buf[256];
-	char hex[23] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 0, 0,
-		0, 0, 0, 0, 10, 11, 12, 13, 14, 15
-	};
-
-	/* Clock setting for MPC107 i2c */
-	mpc107_i2c_init (MPC107_EUMB_ADDR, 0x2b);
-
-	/* Reset the EPIC */
-	out32r (MPC107_EUMB_GCR, 0xa0000000);
-	while (in32r (MPC107_EUMB_GCR) & 0x80000000);	/* Wait for reset to complete */
-	out32r (MPC107_EUMB_GCR, 0x20000000);	/* Put into into mixed mode */
-	while (in32r (MPC107_EUMB_IACKR) != 0xff);	/* Clear all pending interrupts */
-
-	/*
-	 * Check/Remake revision info
-	 */
-	initSrom = 0;
-	copyNv = 0;
-
-	/* read out current revision srom contens */
-	mpc107_srom_load (0x0000, (u_char *) & eerev, sizeof (revinfo),
-			  SECOND_DEVICE, FIRST_BLOCK);
-
-	/* read out current nvram shadow image */
-	nvram_read (buf, CONFIG_SYS_NV_SROM_COPY_ADDR, CONFIG_SYS_SROM_SIZE);
-
-	if (strcmp (eerev.magic, "ELTEC") != 0) {
-		/* srom is not initialized -> create a default revision info */
-		for (i = 0, ptr = (u_char *) & eerev; i < sizeof (revinfo);
-		     i++)
-			*ptr++ = 0x00;
-		strcpy (eerev.magic, "ELTEC");
-		eerev.revrev[0] = 1;
-		eerev.revrev[1] = 0;
-		eerev.size = 0x00E0;
-		eerev.category[0] = 0x01;
-
-		/* node id from dead e128 as default */
-		eerev.etheraddr[0] = 0x00;
-		eerev.etheraddr[1] = 0x00;
-		eerev.etheraddr[2] = 0x5B;
-		eerev.etheraddr[3] = 0x00;
-		eerev.etheraddr[4] = 0x2E;
-		eerev.etheraddr[5] = 0x4D;
-
-		/* cache config word for ELPPC */
-		memset(&eerev.res[0], 0, 4);
-
-		initSrom = 1;	/* force dialog */
-		copyNv = 1;	/* copy to nvram */
-	}
-
-	if ((copyNv == 0)
-	    && (el_srom_checksum ((u_char *) & eerev, CONFIG_SYS_SROM_SIZE) !=
-		el_srom_checksum ((u_char *) buf, CONFIG_SYS_SROM_SIZE))) {
-		printf ("Invalid revision info copy in nvram !\n");
-		printf ("Press key:\n  <c> to copy current revision info to nvram.\n");
-		printf ("  <r> to reenter revision info.\n");
-		printf ("=> ");
-		if (0 != readline (NULL)) {
-			switch ((char) toupper (console_buffer[0])) {
-			case 'C':
-				copyNv = 1;
-				break;
-			case 'R':
-				copyNv = 1;
-				initSrom = 1;
-				break;
-			}
-		}
-	}
-
-	if (initSrom) {
-		memcpy (buf, &eerev.revision[0][0], 14);	/* save all revision info */
-		printf ("Enter revision number (0-9): %c  ",
-			eerev.revision[0][0]);
-		if (0 != readline (NULL)) {
-			eerev.revision[0][0] =
-				(char) toupper (console_buffer[0]);
-			memcpy (&eerev.revision[1][0], buf, 12);	/* shift rest of rev info */
-		}
-
-		printf ("Enter revision character (A-Z): %c  ",
-			eerev.revision[0][1]);
-		if (1 == readline (NULL)) {
-			eerev.revision[0][1] =
-				(char) toupper (console_buffer[0]);
-		}
-
-		printf ("Enter board name (V-XXXX-XXXX): %s  ",
-			(char *) &eerev.board);
-		if (11 == readline (NULL)) {
-			for (i = 0; i < 11; i++)
-				eerev.board[i] =
-					(char) toupper (console_buffer[i]);
-			eerev.board[11] = '\0';
-		}
-
-		printf ("Enter serial number: %s ", (char *) &eerev.serial);
-		if (6 == readline (NULL)) {
-			for (i = 0; i < 6; i++)
-				eerev.serial[i] = console_buffer[i];
-			eerev.serial[6] = '\0';
-		}
-
-		printf ("Enter ether node ID with leading zero (HEX): %02x%02x%02x%02x%02x%02x  ", eerev.etheraddr[0], eerev.etheraddr[1], eerev.etheraddr[2], eerev.etheraddr[3], eerev.etheraddr[4], eerev.etheraddr[5]);
-		if (12 == readline (NULL)) {
-			for (i = 0; i < 12; i += 2)
-				eerev.etheraddr[i >> 1] =
-					(char) (16 *
-						hex[toupper
-						    (console_buffer[i]) -
-						    '0'] +
-						hex[toupper
-						    (console_buffer[i + 1]) -
-						    '0']);
-		}
-
-		l = strlen ((char *) &eerev.text);
-		printf ("Add to text section (max 64 chr): %s ",
-			(char *) &eerev.text);
-		if (0 != readline (NULL)) {
-			for (i = l; i < 63; i++)
-				eerev.text[i] = console_buffer[i - l];
-			eerev.text[63] = '\0';
-		}
-
-		/* prepare network eeprom */
-		memset (buf, 0, 128);
-
-		buf[0] = eerev.etheraddr[1];
-		buf[1] = eerev.etheraddr[0];
-		buf[2] = eerev.etheraddr[3];
-		buf[3] = eerev.etheraddr[2];
-		buf[4] = eerev.etheraddr[5];
-		buf[5] = eerev.etheraddr[4];
-
-		buf[20] = 0x48;
-		buf[21] = 0xB2;
-
-		buf[22] = 0x00;
-		buf[23] = 0x04;
-
-		buf[24] = 0x14;
-		buf[25] = 0x33;
-
-		printf ("\nSRom:  Writing i82559 info ........ ");
-		if (eepro100_srom_store ((unsigned short *) buf) == -1)
-			printf ("FAILED\n");
-		else
-			printf ("OK\n");
-
-		/* update CRC */
-		eerev.crc =
-			el_srom_checksum ((u_char *) eerev.board, eerev.size);
-
-		/* write new values */
-		printf ("\nSRom:  Writing revision info ...... ");
-		if (mpc107_srom_store
-		    ((BLOCK_SIZE - sizeof (revinfo)), (u_char *) & eerev,
-		     sizeof (revinfo), SECOND_DEVICE, FIRST_BLOCK) == -1)
-			printf ("FAILED\n\n");
-		else
-			printf ("OK\n\n");
-
-		/* write new values as shadow image to nvram */
-		nvram_write (CONFIG_SYS_NV_SROM_COPY_ADDR, (void *) &eerev,
-			     CONFIG_SYS_SROM_SIZE);
-
-	}
-
-	/*if (initSrom) */
-	/* copy current values as shadow image to nvram */
-	if (initSrom == 0 && copyNv == 1)
-		nvram_write (CONFIG_SYS_NV_SROM_COPY_ADDR, (void *) &eerev,
-			     CONFIG_SYS_SROM_SIZE);
-
-	/* update environment */
-	sprintf (buf, "%02x:%02x:%02x:%02x:%02x:%02x",
-		 eerev.etheraddr[0], eerev.etheraddr[1],
-		 eerev.etheraddr[2], eerev.etheraddr[3],
-		 eerev.etheraddr[4], eerev.etheraddr[5]);
-	setenv ("ethaddr", buf);
-
-	/* print actual board identification */
-	printf ("Ident: %s  Ser %s  Rev %c%c\n",
-		eerev.board, (char *) &eerev.serial,
-		eerev.revision[0][0], eerev.revision[0][1]);
-
-	return (0);
-}
-
-/*----------------------------------------------------------------------------*/