Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

2 files changed, 0 insertions, 162 deletions

diff --git a/qemu/roms/u-boot/board/calao/usb_a9263/Makefile b/qemu/roms/u-boot/board/calao/usb_a9263/Makefile
deleted file mode 100644
index 8a22b3eac..000000000
--- a/qemu/roms/u-boot/board/calao/usb_a9263/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stelian@popies.net>
-# Lead Tech Design <www.leadtechdesign.com>
-#
-# (C) Copyright 2013
-# Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-
-obj-y	+= usb_a9263.o
diff --git a/qemu/roms/u-boot/board/calao/usb_a9263/usb_a9263.c b/qemu/roms/u-boot/board/calao/usb_a9263/usb_a9263.c
deleted file mode 100644
index 266e9507e..000000000
--- a/qemu/roms/u-boot/board/calao/usb_a9263/usb_a9263.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * (C) Copyright 2007-2013
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- * Thomas Petazzoni, Free Electrons, <thomas.petazzoni@free-electrons.com>
- * Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/at91sam9_smc.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_matrix.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm-generic/gpio.h>
-#include <asm/io.h>
-#include <net.h>
-#include <netdev.h>
-#include <dataflash.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_HAS_DATAFLASH
-AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-
-struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
-	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
-};
-
-/*define the area offsets*/
-dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
-	{0x00000000, 0x00001FFF, FLAG_PROTECT_SET, 0, "Bootstrap"},
-	{0x00002000, 0x00003FFF, FLAG_PROTECT_CLEAR, 0, "Environment"},
-	{0x00004000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "U-Boot"},
-};
-#endif
-
-#ifdef CONFIG_CMD_NAND
-static void usb_a9263_nand_hw_init(void)
-{
-	unsigned long csa;
-	at91_smc_t *smc = (at91_smc_t *)ATMEL_BASE_SMC0;
-	at91_matrix_t *matrix = (at91_matrix_t *)ATMEL_BASE_MATRIX;
-	at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
-
-	/* Enable CS3 */
-	csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A;
-	writel(csa, &matrix->csa[0]);
-
-	/* Configure SMC CS3 for NAND/SmartMedia */
-	writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
-	       AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
-	       &smc->cs[3].setup);
-
-	writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
-	       AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
-	       &smc->cs[3].pulse);
-
-	writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
-	       &smc->cs[3].cycle);
-
-	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
-	       AT91_SMC_MODE_EXNW_DISABLE |
-	       AT91_SMC_MODE_DBW_8 |
-	       AT91_SMC_MODE_TDF_CYCLE(2), &smc->cs[3].mode);
-
-	writel(1 << ATMEL_ID_PIOA | 1 << ATMEL_ID_PIOCDE, &pmc->pcer);
-
-	/* Configure RDY/BSY */
-	gpio_request(CONFIG_SYS_NAND_READY_PIN, "NAND ready/busy");
-	gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
-
-	/* Enable NandFlash */
-	gpio_request(CONFIG_SYS_NAND_ENABLE_PIN, "NAND enable");
-	gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
-}
-#endif
-
-#ifdef CONFIG_MACB
-static void usb_a9263_macb_hw_init(void)
-{
-	at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
-
-	/* Enable clock */
-	writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
-
-	/*
-	 * Disable pull-up on:
-	 *  RXDV (PC25) => PHY normal mode (not Test mode)
-	 *  ERX0 (PE25) => PHY ADDR0
-	 *  ERX1 (PE26) => PHY ADDR1 => PHYADDR = 0x0
-	 *
-	 * PHY has internal weak pull-up/pull-down
-	 */
-	gpio_request(GPIO_PIN_PC(25), "PHY mode");
-	gpio_direction_input(GPIO_PIN_PC(25));
-
-	gpio_request(GPIO_PIN_PE(25), "PHY ADDR0");
-	gpio_direction_input(GPIO_PIN_PE(25));
-
-	gpio_request(GPIO_PIN_PE(26), "PHY ADDR1");
-	gpio_direction_input(GPIO_PIN_PE(26));
-
-	at91_phy_reset();
-
-	/* It will set proper pinmux for ports PC25, PE25-26 */
-	at91_macb_hw_init();
-}
-#endif
-
-int board_init(void)
-{
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
-#ifdef CONFIG_CMD_NAND
-	usb_a9263_nand_hw_init();
-#endif
-#ifdef CONFIG_HAS_DATAFLASH
-	at91_spi0_hw_init(1 << 0);
-#endif
-#ifdef CONFIG_MACB
-	usb_a9263_macb_hw_init();
-#endif
-#ifdef CONFIG_USB_OHCI_NEW
-	at91_uhp_hw_init();
-#endif
-	return 0;
-}
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
-				    CONFIG_SYS_SDRAM_SIZE);
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-
-#ifdef CONFIG_MACB
-	rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x0001);
-#endif
-	return rc;
-}