Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 80 deletions

diff --git a/qemu/roms/u-boot/board/bf609-ezkit/soft_switch.h b/qemu/roms/u-boot/board/bf609-ezkit/soft_switch.h
deleted file mode 100644
index d147fe137..000000000
--- a/qemu/roms/u-boot/board/bf609-ezkit/soft_switch.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * U-boot - main board file
- *
- * Copyright (c) 2008-2011 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef __BOARD_SOFT_SWITCH_H__
-#define __BOARD_SOFT_SWITCH_H__
-
-#include <asm/soft_switch.h>
-
-/* switch 0 port A */
-#define CAN_EN                 0x1
-#define CAN_STB                0x2
-#define CAN0_ERR_EN            0x4
-#define CAN0RX_EN              0x8
-#define CNT0UD_EN              0x10
-#define CNT0DG_EN              0x20
-#define CNT0ZM_EN              0x40
-#define RMII_CLK_EN            0x80
-
-/* switch 0 port B */
-#define UART0RTS_EN            0x1
-#define UART0RX_EN             0x2
-#define UART0CTS_EN            0x4
-#define UART0CTS_RTS_LPBK      0x8
-#define UART0CTS_RST_EN        0x10
-#define UART0CTS_146_EN        0x20
-#define TEMP_IRQ_EN            0x40
-#define TEMP_THERM_EN          0x80
-
-/* switch 1 port A */
-#define OVERRIDE_SMC0_LP0_BOOT 0x1
-#define SMC0_EPPI2_LP1_SWITCH  0x2
-#define SMC0_LP0_EN            0x8
-#define LED1_GPIO_EN           0x10
-#define LED2_GPIO_EN           0x20
-#define LED3_GPIO_EN           0x40
-#define LED4_GPIO_EN           0x80
-
-/* switch 1 port B */
-#define PUSHBUTTON1_EN         0x1
-#define PUSHBUTTON2_EN         0x2
-#define SD_CD_EN               0x4
-#define SD_WP_EN               0x8
-#define SPIFLASH_CS_EN         0x10
-#define SPI0D2_EN              0x20
-#define SPI0D3_EN              0x40
-
-/* switch 2 port A */
-#define PHYINT_EN              0x1
-#define PHY_PWR_DWN_INT        0x2
-#define PHYAD0                 0x4
-#define ETHERNET_EN            0x8
-#define WAKE_PUSHBUTTON_EN     0x10
-#define PD0_SPI0D2_EN          0x20
-#define PD1_SPI0D3_EN          0x40
-#define PD2_SPI0MISO_EN        0x80
-
-/* switch 2 port B */
-#define PD3_SPI0MOSI_EN        0x1
-#define PD4_SPI0CK_EN          0x2
-
-#ifdef CONFIG_BFIN_BOARD_VERSION_1_0
-#define SWITCH_ADDR     0x21
-#else
-#define SWITCH_ADDR     0x20
-#endif
-
-#define NUM_SWITCH      3
-#define IODIRA          0x0
-#define IODIRB          0x1
-#define OLATA           0x14
-#define OLATB           0x15
-
-int setup_board_switches(void);
-
-#endif /* __BOARD_SOFT_SWITCH_H__ */