Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

2 files changed, 0 insertions, 134 deletions

diff --git a/qemu/roms/u-boot/board/atmel/atstk1000/Makefile b/qemu/roms/u-boot/board/atmel/atstk1000/Makefile
deleted file mode 100644
index ad76631b9..000000000
--- a/qemu/roms/u-boot/board/atmel/atstk1000/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright (C) 2005-2006 Atmel Corporation
-#
-# SPDX-License-Identifier:	GPL-2.0+
-
-obj-y			+= atstk1000.o
diff --git a/qemu/roms/u-boot/board/atmel/atstk1000/atstk1000.c b/qemu/roms/u-boot/board/atmel/atstk1000/atstk1000.c
deleted file mode 100644
index 4b6b90f68..000000000
--- a/qemu/roms/u-boot/board/atmel/atstk1000/atstk1000.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Copyright (C) 2005-2006 Atmel Corporation
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <common.h>
-
-#include <asm/io.h>
-#include <asm/sdram.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/hmatrix.h>
-#include <asm/arch/mmu.h>
-#include <asm/arch/portmux.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
-	{
-		.virt_pgno	= CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT,
-		.nr_pages	= CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT,
-		.phys		= (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT)
-					| MMU_VMR_CACHE_NONE,
-	}, {
-		.virt_pgno	= CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT,
-		.nr_pages	= EBI_SDRAM_SIZE >> PAGE_SHIFT,
-		.phys		= (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT)
-					| MMU_VMR_CACHE_WRBACK,
-	},
-};
-
-static const struct sdram_config sdram_config = {
-#if defined(CONFIG_ATSTK1006)
-	/* Dual MT48LC16M16A2-7E (64 MB) on daughterboard */
-	.data_bits	= SDRAM_DATA_32BIT,
-	.row_bits	= 13,
-	.col_bits	= 9,
-	.bank_bits	= 2,
-	.cas		= 2,
-	.twr		= 2,
-	.trc		= 7,
-	.trp		= 2,
-	.trcd		= 2,
-	.tras		= 4,
-	.txsr		= 7,
-	/* 7.81 us */
-	.refresh_period	= (781 * (SDRAMC_BUS_HZ / 1000)) / 100000,
-#else
-	/* MT48LC2M32B2P-5 (8 MB) on motherboard */
-#ifdef CONFIG_ATSTK1004
-	.data_bits	= SDRAM_DATA_16BIT,
-#else
-	.data_bits	= SDRAM_DATA_32BIT,
-#endif
-#ifdef CONFIG_ATSTK1000_16MB_SDRAM
-	/* MT48LC4M32B2P-6 (16 MB) on mod'ed motherboard */
-	.row_bits	= 12,
-#else
-	.row_bits	= 11,
-#endif
-	.col_bits	= 8,
-	.bank_bits	= 2,
-	.cas		= 3,
-	.twr		= 2,
-	.trc		= 7,
-	.trp		= 2,
-	.trcd		= 2,
-	.tras		= 5,
-	.txsr		= 5,
-	/* 15.6 us */
-	.refresh_period	= (156 * (SDRAMC_BUS_HZ / 1000)) / 10000,
-#endif
-};
-
-int board_early_init_f(void)
-{
-	/* Enable SDRAM in the EBI mux */
-	hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
-
-	portmux_enable_ebi(sdram_config.data_bits, 23, 0, PORTMUX_DRIVE_HIGH);
-	portmux_enable_usart1(PORTMUX_DRIVE_MIN);
-#if defined(CONFIG_MACB)
-	portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_LOW);
-	portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_LOW);
-#endif
-#if defined(CONFIG_MMC)
-	portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW);
-#endif
-
-	return 0;
-}
-
-phys_size_t initdram(int board_type)
-{
-	unsigned long expected_size;
-	unsigned long actual_size;
-	void *sdram_base;
-
-	sdram_base = uncached(EBI_SDRAM_BASE);
-
-	expected_size = sdram_init(sdram_base, &sdram_config);
-	actual_size = get_ram_size(sdram_base, expected_size);
-
-	if (expected_size != actual_size)
-		printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
-				actual_size >> 20, expected_size >> 20);
-
-	return actual_size;
-}
-
-int board_early_init_r(void)
-{
-	gd->bd->bi_phy_id[0] = 0x10;
-	gd->bd->bi_phy_id[1] = 0x11;
-	return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bi)
-{
-	macb_eth_initialize(0, (void *)ATMEL_BASE_MACB0, bi->bi_phy_id[0]);
-	macb_eth_initialize(1, (void *)ATMEL_BASE_MACB1, bi->bi_phy_id[1]);
-	return 0;
-}
-#endif