Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 864 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/arch/powerpc/cpu/ppc4xx/4xx_pci.c b/qemu/roms/u-boot/arch/powerpc/cpu/ppc4xx/4xx_pci.c
new file mode 100644
index 000000000..33dc72585
--- /dev/null
+++ b/qemu/roms/u-boot/arch/powerpc/cpu/ppc4xx/4xx_pci.c
@@ -0,0 +1,864 @@
+/*
+ * SPDX-License-Identifier:	GPL-2.0	IBM-pibs
+ *
+ *  File Name:   405gp_pci.c
+ *
+ *  Function:    Initialization code for the 405GP PCI Configuration regs.
+ *
+ *  Author:      Mark Game
+ *
+ *  Change Activity-
+ *
+ *  Date        Description of Change                                       BY
+ *  ---------   ---------------------                                       ---
+ *  09-Sep-98   Created                                                     MCG
+ *  02-Nov-98   Removed External arbiter selected message                   JWB
+ *  27-Nov-98   Zero out PTMBAR2 and disable in PTM2MS                      JWB
+ *  04-Jan-99   Zero out other unused PMM and PTM regs. Change bus scan     MCG
+ *              from (0 to n) to (1 to n).
+ *  17-May-99   Port to Walnut                                              JWB
+ *  17-Jun-99   Updated for VGA support                                     JWB
+ *  21-Jun-99   Updated to allow SRAM region to be a target from PCI bus    JWB
+ *  19-Jul-99   Updated for 405GP pass 1 errata #26 (Low PCI subsequent     MCG
+ *              target latency timer values are not supported).
+ *              Should be fixed in pass 2.
+ *  09-Sep-99   Removed use of PTM2 since the SRAM region no longer needs   JWB
+ *              to be a PCI target. Zero out PTMBAR2 and disable in PTM2MS.
+ *  10-Dec-99   Updated PCI_Write_CFG_Reg for pass2 errata #6               JWB
+ *  11-Jan-00   Ensure PMMxMAs disabled before setting PMMxLAs. This is not
+ *              really required after a reset since PMMxMAs are already
+ *	        disabled but is a good practice nonetheless.                JWB
+ *  12-Jun-01   stefan.roese@esd-electronics.com
+ *              - PCI host/adapter handling reworked
+ *  09-Jul-01   stefan.roese@esd-electronics.com
+ *              - PCI host now configures from device 0 (not 1) to max_dev,
+ *                (host configures itself)
+ *              - On CPCI-405 pci base address and size is generated from
+ *                SDRAM and FLASH size (CFG regs not used anymore)
+ *              - Some minor changes for CPCI-405-A (adapter version)
+ *  14-Sep-01   stefan.roese@esd-electronics.com
+ *              - CONFIG_PCI_SCAN_SHOW added to print pci devices upon startup
+ *  28-Sep-01   stefan.roese@esd-electronics.com
+ *              - Changed pci master configuration for linux compatibility
+ *                (no need for bios_fixup() anymore)
+ *  26-Feb-02   stefan.roese@esd-electronics.com
+ *              - Bug fixed in pci configuration (Andrew May)
+ *              - Removed pci class code init for CPCI405 board
+ *  15-May-02   stefan.roese@esd-electronics.com
+ *              - New vga device handling
+ *  29-May-02   stefan.roese@esd-electronics.com
+ *              - PCI class code init added (if defined)
+ *----------------------------------------------------------------------------*/
+
+#include <common.h>
+#include <command.h>
+#include <asm/4xx_pci.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <pci.h>
+
+#ifdef CONFIG_PCI
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
+
+#if defined(CONFIG_PMC405)
+ushort pmc405_pci_subsys_deviceid(void);
+#endif
+
+/*#define DEBUG*/
+
+/*
+ * Board-specific pci initialization
+ * Platform code can reimplement pci_pre_init() if needed
+ */
+int __pci_pre_init(struct pci_controller *hose)
+{
+#if defined(CONFIG_405EP)
+	/*
+	 * Enable the internal PCI arbiter by default.
+	 *
+	 * On 405EP CPUs the internal arbiter can be controlled
+	 * by the I2C strapping EEPROM. If you want to do so
+	 * or if you want to disable the arbiter pci_pre_init()
+	 * must be reimplemented without enabling the arbiter.
+	 * The arbiter is enabled in this place because of
+	 * compatibility reasons.
+	 */
+	mtdcr(CPC0_PCI, mfdcr(CPC0_PCI) | CPC0_PCI_ARBIT_EN);
+#endif /* CONFIG_405EP */
+
+	return 1;
+}
+int pci_pre_init(struct pci_controller *hose)
+	__attribute__((weak, alias("__pci_pre_init")));
+
+int __is_pci_host(struct pci_controller *hose)
+{
+#if defined(CONFIG_405GP)
+	if (mfdcr(CPC0_PSR) & PSR_PCI_ARBIT_EN)
+		return 1;
+#elif defined (CONFIG_405EP)
+	if (mfdcr(CPC0_PCI) & CPC0_PCI_ARBIT_EN)
+		return 1;
+#endif
+	return 0;
+}
+int is_pci_host(struct pci_controller *hose) __attribute__((weak, alias("__is_pci_host")));
+
+/*-----------------------------------------------------------------------------+
+ * pci_init.  Initializes the 405GP PCI Configuration regs.
+ *-----------------------------------------------------------------------------*/
+void pci_405gp_init(struct pci_controller *hose)
+{
+	int i, reg_num = 0;
+	bd_t *bd = gd->bd;
+
+	unsigned short temp_short;
+	unsigned long ptmpcila[2] = {CONFIG_SYS_PCI_PTM1PCI, CONFIG_SYS_PCI_PTM2PCI};
+#if defined(CONFIG_PCI_4xx_PTM_OVERWRITE)
+	char *ptmla_str, *ptmms_str;
+#endif
+	unsigned long ptmla[2]    = {CONFIG_SYS_PCI_PTM1LA, CONFIG_SYS_PCI_PTM2LA};
+	unsigned long ptmms[2]    = {CONFIG_SYS_PCI_PTM1MS, CONFIG_SYS_PCI_PTM2MS};
+#if defined(CONFIG_PIP405) || defined (CONFIG_MIP405)
+	unsigned long pmmla[3]    = {0x80000000, 0xA0000000, 0};
+	unsigned long pmmma[3]    = {0xE0000001, 0xE0000001, 0};
+	unsigned long pmmpcila[3] = {0x80000000, 0x00000000, 0};
+	unsigned long pmmpciha[3] = {0x00000000, 0x00000000, 0};
+#else
+	unsigned long pmmla[3]    = {0x80000000, 0,0};
+	unsigned long pmmma[3]    = {0xC0000001, 0,0};
+	unsigned long pmmpcila[3] = {0x80000000, 0,0};
+	unsigned long pmmpciha[3] = {0x00000000, 0,0};
+#endif
+#ifdef CONFIG_PCI_PNP
+#if (CONFIG_PCI_HOST == PCI_HOST_AUTO)
+	char *s;
+#endif
+#endif
+
+#if defined(CONFIG_PCI_4xx_PTM_OVERWRITE)
+	ptmla_str = getenv("ptm1la");
+	ptmms_str = getenv("ptm1ms");
+	if(NULL != ptmla_str && NULL != ptmms_str ) {
+		ptmla[0] = simple_strtoul (ptmla_str, NULL, 16);
+		ptmms[0] = simple_strtoul (ptmms_str, NULL, 16);
+	}
+
+	ptmla_str = getenv("ptm2la");
+	ptmms_str = getenv("ptm2ms");
+	if(NULL != ptmla_str && NULL != ptmms_str ) {
+		ptmla[1] = simple_strtoul (ptmla_str, NULL, 16);
+		ptmms[1] = simple_strtoul (ptmms_str, NULL, 16);
+	}
+#endif
+
+	/*
+	 * Register the hose
+	 */
+	hose->first_busno = 0;
+	hose->last_busno = 0xff;
+
+	/* ISA/PCI I/O space */
+	pci_set_region(hose->regions + reg_num++,
+		       MIN_PCI_PCI_IOADDR,
+		       MIN_PLB_PCI_IOADDR,
+		       0x10000,
+		       PCI_REGION_IO);
+
+	/* PCI I/O space */
+	pci_set_region(hose->regions + reg_num++,
+		       0x00800000,
+		       0xe8800000,
+		       0x03800000,
+		       PCI_REGION_IO);
+
+	reg_num = 2;
+
+	/* Memory spaces */
+	for (i=0; i<2; i++)
+		if (ptmms[i] & 1)
+		{
+			if (!i) hose->pci_fb = hose->regions + reg_num;
+
+			pci_set_region(hose->regions + reg_num++,
+				       ptmpcila[i], ptmla[i],
+				       ~(ptmms[i] & 0xfffff000) + 1,
+				       PCI_REGION_MEM |
+				       PCI_REGION_SYS_MEMORY);
+		}
+
+	/* PCI memory spaces */
+	for (i=0; i<3; i++)
+		if (pmmma[i] & 1)
+		{
+			pci_set_region(hose->regions + reg_num++,
+				       pmmpcila[i], pmmla[i],
+				       ~(pmmma[i] & 0xfffff000) + 1,
+				       PCI_REGION_MEM);
+		}
+
+	hose->region_count = reg_num;
+
+	pci_setup_indirect(hose,
+			   PCICFGADR,
+			   PCICFGDATA);
+
+	if (hose->pci_fb)
+		pciauto_region_init(hose->pci_fb);
+
+	/* Let board change/modify hose & do initial checks */
+	if (pci_pre_init(hose) == 0) {
+		printf("PCI: Board-specific initialization failed.\n");
+		printf("PCI: Configuration aborted.\n");
+		return;
+	}
+
+	pci_register_hose(hose);
+
+	/*--------------------------------------------------------------------------+
+	 * 405GP PCI Master configuration.
+	 * Map one 512 MB range of PLB/processor addresses to PCI memory space.
+	 * PLB address 0x80000000-0xBFFFFFFF ==> PCI address 0x80000000-0xBFFFFFFF
+	 * Use byte reversed out routines to handle endianess.
+	 *--------------------------------------------------------------------------*/
+	out32r(PMM0MA,    (pmmma[0]&~0x1)); /* disable, configure PMMxLA, PMMxPCILA first */
+	out32r(PMM0LA,    pmmla[0]);
+	out32r(PMM0PCILA, pmmpcila[0]);
+	out32r(PMM0PCIHA, pmmpciha[0]);
+	out32r(PMM0MA,    pmmma[0]);
+
+	/*--------------------------------------------------------------------------+
+	 * PMM1 is not used.  Initialize them to zero.
+	 *--------------------------------------------------------------------------*/
+	out32r(PMM1MA,    (pmmma[1]&~0x1));
+	out32r(PMM1LA,    pmmla[1]);
+	out32r(PMM1PCILA, pmmpcila[1]);
+	out32r(PMM1PCIHA, pmmpciha[1]);
+	out32r(PMM1MA,    pmmma[1]);
+
+	/*--------------------------------------------------------------------------+
+	 * PMM2 is not used.  Initialize them to zero.
+	 *--------------------------------------------------------------------------*/
+	out32r(PMM2MA,    (pmmma[2]&~0x1));
+	out32r(PMM2LA,    pmmla[2]);
+	out32r(PMM2PCILA, pmmpcila[2]);
+	out32r(PMM2PCIHA, pmmpciha[2]);
+	out32r(PMM2MA,    pmmma[2]);
+
+	/*--------------------------------------------------------------------------+
+	 * 405GP PCI Target configuration.  (PTM1)
+	 * Note: PTM1MS is hardwire enabled but we set the enable bit anyway.
+	 *--------------------------------------------------------------------------*/
+	out32r(PTM1LA,    ptmla[0]);         /* insert address                     */
+	out32r(PTM1MS,    ptmms[0]);         /* insert size, enable bit is 1       */
+	pci_write_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_1, ptmpcila[0]);
+
+	/*--------------------------------------------------------------------------+
+	 * 405GP PCI Target configuration.  (PTM2)
+	 *--------------------------------------------------------------------------*/
+	out32r(PTM2LA, ptmla[1]);            /* insert address                     */
+	pci_write_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_2, ptmpcila[1]);
+
+	if (ptmms[1] == 0)
+	{
+		out32r(PTM2MS,    0x00000001);   /* set enable bit                     */
+		pci_write_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_2, 0x00000000);
+		out32r(PTM2MS,    0x00000000);   /* disable                            */
+	}
+	else
+	{
+		out32r(PTM2MS, ptmms[1]);        /* insert size, enable bit is 1       */
+	}
+
+	/*
+	 * Insert Subsystem Vendor and Device ID
+	 */
+	pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_VENDOR_ID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
+#ifdef CONFIG_CPCI405
+	if (is_pci_host(hose))
+		pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
+	else
+		pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID2);
+#else
+	pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
+#endif
+
+	/*
+	 * Insert Class-code
+	 */
+#ifdef CONFIG_SYS_PCI_CLASSCODE
+	pci_write_config_word(PCIDEVID_405GP, PCI_CLASS_SUB_CODE, CONFIG_SYS_PCI_CLASSCODE);
+#endif /* CONFIG_SYS_PCI_CLASSCODE */
+
+	/*--------------------------------------------------------------------------+
+	 * If PCI speed = 66MHz, set 66MHz capable bit.
+	 *--------------------------------------------------------------------------*/
+	if (bd->bi_pci_busfreq >= 66000000) {
+		pci_read_config_word(PCIDEVID_405GP, PCI_STATUS, &temp_short);
+		pci_write_config_word(PCIDEVID_405GP,PCI_STATUS,(temp_short|PCI_STATUS_66MHZ));
+	}
+
+#if (CONFIG_PCI_HOST != PCI_HOST_ADAPTER)
+#if (CONFIG_PCI_HOST == PCI_HOST_AUTO)
+	if (is_pci_host(hose) ||
+	    (((s = getenv("pciscan")) != NULL) && (strcmp(s, "yes") == 0)))
+#endif
+	{
+		/*--------------------------------------------------------------------------+
+		 * Write the 405GP PCI Configuration regs.
+		 * Enable 405GP to be a master on the PCI bus (PMM).
+		 * Enable 405GP to act as a PCI memory target (PTM).
+		 *--------------------------------------------------------------------------*/
+		pci_read_config_word(PCIDEVID_405GP, PCI_COMMAND, &temp_short);
+		pci_write_config_word(PCIDEVID_405GP, PCI_COMMAND, temp_short |
+				      PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+	}
+#endif
+
+#if defined(CONFIG_405EP)
+	/*
+	 * on ppc405ep vendor/device id is not set
+	 * The user manual says 0x1014 (IBM) / 0x0156 (405GP!)
+	 * are the correct values.
+	 */
+	pci_write_config_word(PCIDEVID_405GP, PCI_VENDOR_ID, PCI_VENDOR_ID_IBM);
+	pci_write_config_word(PCIDEVID_405GP,
+			      PCI_DEVICE_ID, PCI_DEVICE_ID_IBM_405GP);
+#endif
+
+	/*
+	 * Set HCE bit (Host Configuration Enabled)
+	 */
+	pci_read_config_word(PCIDEVID_405GP, PCIBRDGOPT2, &temp_short);
+	pci_write_config_word(PCIDEVID_405GP, PCIBRDGOPT2, (temp_short | 0x0001));
+
+#ifdef CONFIG_PCI_PNP
+	/*--------------------------------------------------------------------------+
+	 * Scan the PCI bus and configure devices found.
+	 *--------------------------------------------------------------------------*/
+#if (CONFIG_PCI_HOST == PCI_HOST_AUTO)
+	if (is_pci_host(hose) ||
+	    (((s = getenv("pciscan")) != NULL) && (strcmp(s, "yes") == 0)))
+#endif
+	{
+#ifdef CONFIG_PCI_SCAN_SHOW
+		printf("PCI:   Bus Dev VenId DevId Class Int\n");
+#endif
+		hose->last_busno = pci_hose_scan(hose);
+	}
+#endif  /* CONFIG_PCI_PNP */
+
+}
+
+/*
+ * drivers/pci/pci.c skips every host bridge but the 405GP since it could
+ * be set as an Adapter.
+ *
+ * I (Andrew May) don't know what we should do here, but I don't want
+ * the auto setup of a PCI device disabling what is done pci_405gp_init
+ * as has happened before.
+ */
+void pci_405gp_setup_bridge(struct pci_controller *hose, pci_dev_t dev,
+			    struct pci_config_table *entry)
+{
+#ifdef DEBUG
+	printf("405gp_setup_bridge\n");
+#endif
+}
+
+/*
+ *
+ */
+
+void pci_405gp_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
+{
+	unsigned char int_line = 0xff;
+
+	/*
+	 * Write pci interrupt line register (cpci405 specific)
+	 */
+	switch (PCI_DEV(dev) & 0x03)
+	{
+	case 0:
+		int_line = 27 + 2;
+		break;
+	case 1:
+		int_line = 27 + 3;
+		break;
+	case 2:
+		int_line = 27 + 0;
+		break;
+	case 3:
+		int_line = 27 + 1;
+		break;
+	}
+
+	pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line);
+}
+
+void pci_405gp_setup_vga(struct pci_controller *hose, pci_dev_t dev,
+			 struct pci_config_table *entry)
+{
+	unsigned int cmdstat = 0;
+
+	pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
+
+	/* always enable io space on vga boards */
+	pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);
+	cmdstat |= PCI_COMMAND_IO;
+	pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
+}
+
+#if !(defined(CONFIG_PIP405) || defined (CONFIG_MIP405)) && !(defined (CONFIG_SC3))
+
+/*
+ *As is these functs get called out of flash Not a horrible
+ *thing, but something to keep in mind. (no statics?)
+ */
+static struct pci_config_table pci_405gp_config_table[] = {
+/*if VendID is 0 it terminates the table search (ie Walnut)*/
+#ifdef CONFIG_SYS_PCI_SUBSYS_VENDORID
+	{CONFIG_SYS_PCI_SUBSYS_VENDORID, PCI_ANY_ID, PCI_CLASS_BRIDGE_HOST,
+	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_bridge},
+#endif
+	{PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA,
+	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_vga},
+
+	{PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NOT_DEFINED_VGA,
+	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_vga},
+
+	{ }
+};
+
+static struct pci_controller hose = {
+	fixup_irq: pci_405gp_fixup_irq,
+	config_table: pci_405gp_config_table,
+};
+
+void pci_init_board(void)
+{
+	/*we want the ptrs to RAM not flash (ie don't use init list)*/
+	hose.fixup_irq    = pci_405gp_fixup_irq;
+	hose.config_table = pci_405gp_config_table;
+	pci_405gp_init(&hose);
+}
+
+#endif
+
+#endif /* CONFIG_405GP */
+
+/*-----------------------------------------------------------------------------+
+ * CONFIG_440
+ *-----------------------------------------------------------------------------*/
+#if defined(CONFIG_440)
+
+#if defined(CONFIG_SYS_PCI_MASTER_INIT) || defined(CONFIG_SYS_PCI_TARGET_INIT)
+static struct pci_controller ppc440_hose = {0};
+#endif
+
+/*
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ * Weak default implementation: "Normal" boards implement the PCI
+ * host functionality. This can be overridden for PCI adapter boards.
+ */
+int __is_pci_host(struct pci_controller *hose)
+{
+	return 1;
+}
+int is_pci_host(struct pci_controller *hose)
+	__attribute__((weak, alias("__is_pci_host")));
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
+    defined(CONFIG_440GR) || defined(CONFIG_440GRX)
+
+#if defined(CONFIG_SYS_PCI_TARGET_INIT)
+/*
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ */
+void __pci_target_init(struct pci_controller *hose)
+{
+	/*
+	 * Set up Direct MMIO registers
+	 */
+
+	/*
+	 * PowerPC440 EP PCI Master configuration.
+	 * Map one 1Gig range of PLB/processor addresses to PCI memory space.
+	 * PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
+	 * Use byte reversed out routines to handle endianess.
+	 * Make this region non-prefetchable.
+	 */
+	/* PMM0 Mask/Attribute - disabled b4 setting */
+	out_le32((void *)PCIL0_PMM0MA, 0x00000000);
+	/* PMM0 Local Address */
+	out_le32((void *)PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);
+	/* PMM0 PCI Low Address */
+	out_le32((void *)PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);
+	/* PMM0 PCI High Address */
+	out_le32((void *)PCIL0_PMM0PCIHA, 0x00000000);
+	/* 512M + No prefetching, and enable region */
+	out_le32((void *)PCIL0_PMM0MA, 0xE0000001);
+
+	/* PMM1 Mask/Attribute - disabled b4 setting */
+	out_le32((void *)PCIL0_PMM1MA, 0x00000000);
+	/* PMM1 Local Address */
+	out_le32((void *)PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2);
+	/* PMM1 PCI Low Address */
+	out_le32((void *)PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);
+	/* PMM1 PCI High Address */
+	out_le32((void *)PCIL0_PMM1PCIHA, 0x00000000);
+	/* 512M + No prefetching, and enable region */
+	out_le32((void *)PCIL0_PMM1MA, 0xE0000001);
+
+	out_le32((void *)PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */
+	out_le32((void *)PCIL0_PTM1LA, 0);	/* Local Addr. Reg */
+	out_le32((void *)PCIL0_PTM2MS, 0);	/* Memory Size/Attribute */
+	out_le32((void *)PCIL0_PTM2LA, 0);	/* Local Addr. Reg */
+
+	/*
+	 * Set up Configuration registers
+	 */
+
+	/* Program the board's subsystem id/vendor id */
+	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
+			      CONFIG_SYS_PCI_SUBSYS_VENDORID);
+	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID);
+
+	/* Configure command register as bus master */
+	pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
+
+	/* 240nS PCI clock */
+	pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
+
+	/* No error reporting */
+	pci_write_config_word(0, PCI_ERREN, 0);
+
+	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
+}
+#endif /* CONFIG_SYS_PCI_TARGET_INIT */
+
+/*
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ *
+ */
+int __pci_pre_init(struct pci_controller *hose)
+{
+	u32 reg;
+
+	/*
+	 * Set priority for all PLB3 devices to 0.
+	 * Set PLB3 arbiter to fair mode.
+	 */
+	mfsdr(SDR0_AMP1, reg);
+	mtsdr(SDR0_AMP1, (reg & 0x000000FF) | 0x0000FF00);
+	reg = mfdcr(PLB3A0_ACR);
+	mtdcr(PLB3A0_ACR, reg | 0x80000000);
+
+	/*
+	 * Set priority for all PLB4 devices to 0.
+	 */
+	mfsdr(SDR0_AMP0, reg);
+	mtsdr(SDR0_AMP0, (reg & 0x000000FF) | 0x0000FF00);
+	reg = mfdcr(PLB4A0_ACR) | 0xa0000000;
+	mtdcr(PLB4A0_ACR, reg);
+
+	/*
+	 * Set Nebula PLB4 arbiter to fair mode.
+	 */
+	/* Segment0 */
+	reg = (mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_PPM_MASK) | PLB4Ax_ACR_PPM_FAIR;
+	reg = (reg & ~PLB4Ax_ACR_HBU_MASK) | PLB4Ax_ACR_HBU_ENABLED;
+	reg = (reg & ~PLB4Ax_ACR_RDP_MASK) | PLB4Ax_ACR_RDP_4DEEP;
+	reg = (reg & ~PLB4Ax_ACR_WRP_MASK) | PLB4Ax_ACR_WRP_2DEEP;
+	mtdcr(PLB4A0_ACR, reg);
+
+	/* Segment1 */
+	reg = (mfdcr(PLB4A1_ACR) & ~PLB4Ax_ACR_PPM_MASK) | PLB4Ax_ACR_PPM_FAIR;
+	reg = (reg & ~PLB4Ax_ACR_HBU_MASK) | PLB4Ax_ACR_HBU_ENABLED;
+	reg = (reg & ~PLB4Ax_ACR_RDP_MASK) | PLB4Ax_ACR_RDP_4DEEP;
+	reg = (reg & ~PLB4Ax_ACR_WRP_MASK) | PLB4Ax_ACR_WRP_2DEEP;
+	mtdcr(PLB4A1_ACR, reg);
+
+#if defined(CONFIG_SYS_PCI_BOARD_FIXUP_IRQ)
+	hose->fixup_irq = board_pci_fixup_irq;
+#endif
+
+	return 1;
+}
+
+#else /* defined(CONFIG_440EP) ... */
+
+#if defined(CONFIG_SYS_PCI_TARGET_INIT)
+void __pci_target_init(struct pci_controller * hose)
+{
+	/*
+	 * Disable everything
+	 */
+	out_le32((void *)PCIL0_PIM0SA, 0); /* disable */
+	out_le32((void *)PCIL0_PIM1SA, 0); /* disable */
+	out_le32((void *)PCIL0_PIM2SA, 0); /* disable */
+	out_le32((void *)PCIL0_EROMBA, 0); /* disable expansion rom */
+
+	/*
+	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
+	 * strapping options do not support sizes such as 128/256 MB.
+	 */
+	out_le32((void *)PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
+	out_le32((void *)PCIL0_PIM0LAH, 0);
+	out_le32((void *)PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1);
+	out_le32((void *)PCIL0_BAR0, 0);
+
+	/*
+	 * Program the board's subsystem id/vendor id
+	 */
+	out_le16((void *)PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
+	out_le16((void *)PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
+
+	out_le16((void *)PCIL0_CMD, in_le16((void *)PCIL0_CMD) |
+		 PCI_COMMAND_MEMORY);
+}
+#endif /* CONFIG_SYS_PCI_TARGET_INIT */
+
+int __pci_pre_init(struct pci_controller *hose)
+{
+	/*
+	 * This board is always configured as the host & requires the
+	 * PCI arbiter to be enabled.
+	 */
+	if (!pci_arbiter_enabled()) {
+		printf("PCI: PCI Arbiter disabled!\n");
+		return 0;
+	}
+
+	return 1;
+}
+
+#endif /* defined(CONFIG_440EP) ... */
+
+#if defined(CONFIG_SYS_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller * hose)
+	__attribute__((weak, alias("__pci_target_init")));
+#endif /* CONFIG_SYS_PCI_TARGET_INIT */
+
+int pci_pre_init(struct pci_controller *hose)
+	__attribute__((weak, alias("__pci_pre_init")));
+
+#if defined(CONFIG_SYS_PCI_MASTER_INIT)
+void __pci_master_init(struct pci_controller *hose)
+{
+	u16 reg;
+
+	/*
+	 * Write the PowerPC440 EP PCI Configuration regs.
+	 * Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+	 * Enable PowerPC440 EP to act as a PCI memory target (PTM).
+	 */
+	pci_read_config_word(0, PCI_COMMAND, &reg);
+	pci_write_config_word(0, PCI_COMMAND, reg |
+			      PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+}
+void pci_master_init(struct pci_controller *hose)
+	__attribute__((weak, alias("__pci_master_init")));
+#endif /* CONFIG_SYS_PCI_MASTER_INIT */
+
+#if defined(CONFIG_SYS_PCI_MASTER_INIT) || defined(CONFIG_SYS_PCI_TARGET_INIT)
+static int pci_440_init (struct pci_controller *hose)
+{
+	int reg_num = 0;
+
+#ifndef CONFIG_DISABLE_PISE_TEST
+	/*--------------------------------------------------------------------------+
+	 * The PCI initialization sequence enable bit must be set ... if not abort
+	 * pci setup since updating the bit requires chip reset.
+	 *--------------------------------------------------------------------------*/
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+	unsigned long strap;
+
+	mfsdr(SDR0_SDSTP1,strap);
+	if ((strap & SDR0_SDSTP1_PISE_MASK) == 0) {
+		printf("PCI: SDR0_STRP1[PISE] not set.\n");
+		printf("PCI: Configuration aborted.\n");
+		return -1;
+	}
+#elif defined(CONFIG_440GP)
+	unsigned long strap;
+
+	strap = mfdcr(CPC0_STRP1);
+	if ((strap & CPC0_STRP1_PISE_MASK) == 0) {
+		printf("PCI: CPC0_STRP1[PISE] not set.\n");
+		printf("PCI: Configuration aborted.\n");
+		return -1;
+	}
+#endif
+#endif /* CONFIG_DISABLE_PISE_TEST */
+
+	/*--------------------------------------------------------------------------+
+	 * PCI controller init
+	 *--------------------------------------------------------------------------*/
+	hose->first_busno = 0;
+	hose->last_busno = 0;
+
+	/* PCI I/O space */
+	pci_set_region(hose->regions + reg_num++,
+		       0x00000000,
+		       PCIL0_IOBASE,
+		       0x10000,
+		       PCI_REGION_IO);
+
+	/* PCI memory space */
+	pci_set_region(hose->regions + reg_num++,
+		       CONFIG_SYS_PCI_TARGBASE,
+		       CONFIG_SYS_PCI_MEMBASE,
+#ifdef CONFIG_SYS_PCI_MEMSIZE
+		       CONFIG_SYS_PCI_MEMSIZE,
+#else
+		       0x10000000,
+#endif
+		       PCI_REGION_MEM );
+
+#if defined(CONFIG_PCI_SYS_MEM_BUS) && defined(CONFIG_PCI_SYS_MEM_PHYS) && \
+	defined(CONFIG_PCI_SYS_MEM_SIZE)
+	/* System memory space */
+	pci_set_region(hose->regions + reg_num++,
+		       CONFIG_PCI_SYS_MEM_BUS,
+		       CONFIG_PCI_SYS_MEM_PHYS,
+		       CONFIG_PCI_SYS_MEM_SIZE,
+		       PCI_REGION_MEM | PCI_REGION_SYS_MEMORY );
+#endif
+
+	hose->region_count = reg_num;
+
+	pci_setup_indirect(hose, PCIL0_CFGADR, PCIL0_CFGDATA);
+
+	/* Let board change/modify hose & do initial checks */
+	if (pci_pre_init(hose) == 0) {
+		printf("PCI: Board-specific initialization failed.\n");
+		printf("PCI: Configuration aborted.\n");
+		return -1;
+	}
+
+	pci_register_hose( hose );
+
+	/*--------------------------------------------------------------------------+
+	 * PCI target init
+	 *--------------------------------------------------------------------------*/
+#if defined(CONFIG_SYS_PCI_TARGET_INIT)
+	pci_target_init(hose);                /* Let board setup pci target */
+#else
+	out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+	out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_ID );
+	out16r( PCIL0_CLS, 0x00060000 ); /* Bridge, host bridge */
+#endif
+
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+    defined(CONFIG_460EX) || defined(CONFIG_460GT)
+	out32r( PCIL0_BRDGOPT1, 0x04000060 );               /* PLB Rq pri highest   */
+	out32r( PCIL0_BRDGOPT2, in32(PCIL0_BRDGOPT2) | 0x83 ); /* Enable host config, clear Timeout, ensure int src1  */
+#elif defined(PCIL0_BRDGOPT1)
+	out32r( PCIL0_BRDGOPT1, 0x10000060 );               /* PLB Rq pri highest   */
+	out32r( PCIL0_BRDGOPT2, in32(PCIL0_BRDGOPT2) | 1 ); /* Enable host config   */
+#endif
+
+	/*--------------------------------------------------------------------------+
+	 * PCI master init: default is one 256MB region for PCI memory:
+	 * 0x3_00000000 - 0x3_0FFFFFFF  ==> CONFIG_SYS_PCI_MEMBASE
+	 *--------------------------------------------------------------------------*/
+#if defined(CONFIG_SYS_PCI_MASTER_INIT)
+	pci_master_init(hose);          /* Let board setup pci master */
+#else
+	out32r( PCIL0_POM0SA, 0 ); /* disable */
+	out32r( PCIL0_POM1SA, 0 ); /* disable */
+	out32r( PCIL0_POM2SA, 0 ); /* disable */
+#if defined(CONFIG_440SPE)
+	out32r( PCIL0_POM0LAL, 0x10000000 );
+	out32r( PCIL0_POM0LAH, 0x0000000c );
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+	out32r( PCIL0_POM0LAL, 0x20000000 );
+	out32r( PCIL0_POM0LAH, 0x0000000c );
+#else
+	out32r( PCIL0_POM0LAL, 0x00000000 );
+	out32r( PCIL0_POM0LAH, 0x00000003 );
+#endif
+	out32r( PCIL0_POM0PCIAL, CONFIG_SYS_PCI_MEMBASE );
+	out32r( PCIL0_POM0PCIAH, 0x00000000 );
+	out32r( PCIL0_POM0SA, 0xf0000001 ); /* 256MB, enabled */
+	out32r( PCIL0_STS, in32r( PCIL0_STS ) & ~0x0000fff8 );
+#endif
+
+	/*--------------------------------------------------------------------------+
+	 * PCI host configuration -- we don't make any assumptions here ... the
+	 * _board_must_indicate_ what to do -- there's just too many runtime
+	 * scenarios in environments like cPCI, PPMC, etc. to make a determination
+	 * based on hard-coded values or state of arbiter enable.
+	 *--------------------------------------------------------------------------*/
+	if (is_pci_host(hose)) {
+#ifdef CONFIG_PCI_SCAN_SHOW
+		printf("PCI:   Bus Dev VenId DevId Class Int\n");
+#endif
+#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && \
+    !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
+		out16r( PCIL0_CMD, in16r( PCIL0_CMD ) | PCI_COMMAND_MASTER);
+#endif
+		hose->last_busno = pci_hose_scan(hose);
+	}
+	return hose->last_busno;
+}
+#endif
+
+void pci_init_board(void)
+{
+	int busno = 0;
+
+	/*
+	 * Only init PCI when either master or target functionality
+	 * is selected.
+	 */
+#if defined(CONFIG_SYS_PCI_MASTER_INIT) || defined(CONFIG_SYS_PCI_TARGET_INIT)
+	busno = pci_440_init(&ppc440_hose);
+	if (busno < 0)
+		return;
+#endif
+#if (defined(CONFIG_440SPE) || \
+    defined(CONFIG_460EX) || defined(CONFIG_460GT)) && \
+    !defined(CONFIG_PCI_DISABLE_PCIE)
+	pcie_setup_hoses(busno + 1);
+#endif
+}
+
+#endif /* CONFIG_440 */
+
+#if defined(CONFIG_405EX)
+void pci_init_board(void)
+{
+#ifdef CONFIG_PCI_SCAN_SHOW
+	printf("PCI:   Bus Dev VenId DevId Class Int\n");
+#endif
+	pcie_setup_hoses(0);
+}
+#endif /* CONFIG_405EX */
+
+#endif /* CONFIG_PCI */